General :: No Network Access After Installing Suse 11.2?

Sep 8, 2010

I'm new to SUSE. I had some virus issues with Windows Vista and decided to change my OS.

I have the modem set up and still can't get the internet to come up. I get the mozilla blank webpage, but I am connected to the internet server. What can I do to get full internet access if everything seems to be working they way it should except for the blank webpage? I know I must be missing something but what?

Also, how do I open Yast to use it? I think I opened it by accident and got some things done

View 7 Replies


ADVERTISEMENT

OpenSUSE Network :: SUSE 11.3 No Network Access With Static IP

Aug 20, 2010

New SUSE 11.3 install connects to network/internet etc OK with DHCP-assigned IP address. When I switch to static IP, I can no longer ping internal network, or anything else. This works OK with SUSE 11.2 on same hardware and (as far as I can see) same setup. Some diagnostics are shown below.

Firewall
Disabling the firewall makes no difference.

Not using a network manager (can't see how to assign fixed address if I do - all greyed out).

ifup eth0:
eth0 device: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
(not sure why the warning - eth0 is assigned to external in the firewall setup).

[code]....

View 9 Replies View Related

Networking :: No Internet Access After Installing SuSE 11.2

Sep 8, 2010

I have a Toshiba M400 tablet laptop. I installed SuSE 11.2 and have connection to the internet via internal wireless connection to modem zoomtown. I click on mozilla or konquorer but get a blank webpage. I've tried everything I can think of but have not been successful.

View 6 Replies View Related

SUSE :: Can't Access Nagios Web Interface On Network?

Mar 17, 2010

I have set up nagios on Suse 11.2 and it is working fine on the localhost. I can access localhost/nagios, <ipaddress>/nagios in the browser and it loads up the nagios webinterface. If I try on a computer on the network with <ipaddress>/nagios the request times out. I have tested that I can ping to and from both machines (nagios machine and the machine I am trying to access the interface from).Some detailsNagios is running in a hyper-v VM. I installed it through yast2. Communication is run via a switch and sonicwall firewall but firewall has allow all within the network.I have a feeling it's some apache2 setting that I haven't configured or something blocking port 80.

View 7 Replies View Related

General :: Installing Old SuSE Rpms In SUSE 11.2?

Feb 13, 2011

Is it possible to install rpms from SuSE 8.2 pro to run on SUSE 11.2 x86_64. I mean games and simple applications not system files.

View 1 Replies View Related

OpenSUSE Network :: SuSE 11.2 Firewall Blocks Access After A Few Minutes

Dec 1, 2010

I have a fresh install of SuSE 11.2. I have installed Communigate Pro (Email server) and Webmin. From my workstation (on the same LAN), I can access the web interfaces for both CGP and Webmin right after the server boots up. But after about 10 minutes or so, I can no longer access either web interface. The server itself still functions normally. I can get on the internet with the server, and I can control Webmin via localhost:10000.

The only thing that allows me to connect to it from my workstation again is to either restart the server, or go into "Network > Linux Firewall" and click "Apply Configuration". What's going on that makes my remote access stop working?

View 3 Replies View Related

OpenSUSE Network :: Installing Flash Plugin In Firefox In Open SUSE 11.1

Jan 24, 2010

I've installed openSUSE 11.1 in my desktop with default firefox as web browser. Whenever surfing graphical sites Its says flash need to be installed and in the Adobe site which package I've to download? (Yat or tar.gz or rpm, etc.. etc..) and how I can install it.

View 2 Replies View Related

CentOS 5 :: 5.3 Installing Xen Breaks Network Access?

Jul 8, 2009

i got an Compaq proliant ML530 server that i installed CentOS 5.3 on i tested the connectivity to the LAN and to the WAN and everything worked. Then i ran:

"yum install xen xen-kernel"

and after that i can't connect to the network if i ping my other servers there's no replay. i assume this have to do with Xen bridge. But since the tutorials dont mention any configuration needed, i assumed that it would work out of the box.

View 2 Replies View Related

Fedora Installation :: Installing F15 DVD - Repositories Require Network Access

Jul 17, 2011

I've tried to install FEdora 15 using the Fedora 15 DVD for i686 architecture. However, after the step where I chose the setup for GRUB boot options, I got this error: "Some of your repositories require network access but networking could not be setup" (or something similar). Then I only had the option to exit the installer, but after reboot there was no GRUB and I have no means even to boot back to Windows.

How to install Fedora without networking or is Fedora the only distro so messed up that this can't be done? I've tried the Live CD/USB version but that version has no C compiler to allow me to install networking drivers after install completes. Now I was told to try the full DVD, by the full DVD managed to mess up my computer completely.

View 10 Replies View Related

SUSE / Novell :: Install A D-Link Access Point On Suse 11.0?

Sep 16, 2010

how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.

View 3 Replies View Related

General :: Installing GCC On SUSE 10 Says Cc Not Found

Feb 10, 2011

I wanted to package my software as an RPM by rpmbuild command. When I run that it complained that gcc not found.

I downloaded gcc and tried to install that from a tar ball. And it complained about cc: coomand not found. I dont know why is this error being shown because I think cc and gcc are the same. Correct me if I am wrong. My system details are:

I tried to download rpm files for gcc but they dont exist for Suse 10.

View 7 Replies View Related

General :: Installing Suse 10.3 Using Iso Image

Mar 24, 2011

I have 2 hard-disk in my pc. What i want to do is to install suse using iso image kept on secondary hard-disk without using cd/dvd rom.
Kindly tell me the steps to install suse on /dev/sda, using iso img kept in /dev/sdb.

View 1 Replies View Related

General :: Installing Dropbox-api On SUSE Fails?

Jul 7, 2011

I am trying to install the dropbox-api onto my suse 11.4 but i keep getting this error:

Can't locate DateTime.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.12.3/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.12.3 /usr/lib/perl5/vendor_perl/5.12.3/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.12.3 /usr/lib/perl5/5.12.3/i586-linux-

[code]....

View 1 Replies View Related

General :: SuSe - Installing Software As Non Root User

Dec 28, 2010

What is the best way to install software in a linux machine if you dont have root permissions. I know that we can use few variables like PKG_CONFIG_PATH and switches like --prefix with configure to get a software installed in a local directory, but sometimes when there are recursive dependencies it is becoming tough for me to install all the packages manually. Is there a better automated way? What I meant by recursive dependencies is: to install package A, I should install package B, which in turn requires package C to be installed.

View 2 Replies View Related

General :: Installing Ms Office In Open Suse Kde3.5?

Jan 10, 2010

how to install ms office in open suse kde3.5 ,i need the procedure to get it done, i have a problem with updating and extraction of wine 1.1.35 while playonlinux is trying to instal msoffice can anybody sugest a soln fr it.

View 2 Replies View Related

General :: Networking - Network Card - Connected To Network - Given Access Point - No Connection?

Apr 3, 2010

I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?

View 2 Replies View Related

SUSE :: Access Windows Drives With Write Access

Mar 12, 2010

I am dual booting OpenSuse 11.2 and Windows 7 both 64bit on my PC. I've got VMware workstation installed on both. I've got few virtual machines which were all created in Windows VMware and they're all stored on a separate partition. I can access this partition and all other NTFS partition from Suse but with read-only permissions. That means I can't run any of these virtual machines from Suse VMware. Is there any possible way to make all these drives writeable from Suse? I'm really hoping someone would be able to help me. I've got a lot of googling and have even searched this forum but without any luck.

View 4 Replies View Related

General :: Network And Volume Not Working In Suse 10.0

Jan 27, 2010

After installing Suse 10.0 I'm unable to get my network card working. Also the volume control in the task bar in not working. Using Yast I tried configuring network card. The exact card is not on the list provided by Suse. Is this the problem & how do I fix it?

View 2 Replies View Related

OpenSUSE Network :: IPV6 Disabling In Suse In General?

Apr 10, 2011

I've had a hell of a time with this and now all but YAST2 are ok. Going back some time to 10.0 this could be used to disable it very completely.

open terminal and run
echo "alias net-pf-10 off" >> /etc/modprobe.conf
echo "alias ipv6 off" >> /etc/modprobe.conf

restart computer. Has anyone used this on more recent issues even 11.4 and are there any repercussions?I assume that the inverse will but it back on ie off's just become on's? I will be using cups when I install my printer which is one concern and I am not at all sure that modprobe will do anything anymore?

I also recollect that there is a command to cause the kernel to effectively reboot which would save restarting. Can't remember what it is. Maybe some one can refresh my memory.

View 9 Replies View Related

General :: Create A Home Network Between SuSe 11.3 And Windows 7?

Feb 15, 2011

I am trying to set up a home network but I am having a slight problem. The network is reported as being open and active but when I click on the Windows network icon a dialogue reports that " unable to mount location, failed to retrieve share list from server. What have I missed. I have tried other distros such as PClinuxOS and that connected automatically so there is no physical problems with my wired network. My Workgroup is MSHOME and my host is Home1.

View 2 Replies View Related

General :: Suse 11.2 - Network Is Online But Can't Open Pages?

Jun 27, 2010

I have problem with network on my laptop. Networks status is Active and Online but i cant open any pages. (was working until installation openSUSE on ext HDD)I already try both wireless/wired connection but nothing.

View 2 Replies View Related

General :: Suse Server Cannot Boot - No More Network Devices

May 10, 2011

My Suse server is failing to boot and it is giving the following error:

Mellanox ConnectX Boot over IB v1.9.972
gPXE 0.9.6+ -- Open Source Boot Firmware -- [URL]
No more network devices
I have two network interfaces
Infiniband network and the Ethernet network.
It is a x6275 Sun server.

View 1 Replies View Related

General :: Access Old Partitions After Installing Ubuntu?

Jun 10, 2011

This might be a really silly question, but I installed Ubuntu yesterday (which is awesome) but I can't seem to locate any of the other drives that I had hooked up. It's as if the partition with the install is the only one in existence. Is there some trick of the trade I'm not aware of or what's up?

View 1 Replies View Related

General :: After Installing Debian Can't Access Internet?

Jun 1, 2010

My wireless card: TP-LINK 322G + I ask, after the installation is complete debian5.04, how to configure wireless Internet access,

lspci entry:

00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)

[Code]...

View 8 Replies View Related

General :: Run Network Based Windows Softare Under Wine In Ubuntu Or Open Suse?

May 6, 2011

i run network based windows softare under wine in ubuntu or open suse.

View 1 Replies View Related

OpenSUSE Network :: Suse 10.2 Network Card ( DG41RQ ) Configuration?

Jun 19, 2010

i am using intel hardware on this working on suse linux 10.2 . i am not able to configure the network card IP address I have tryed using dhcp and static both way. Currently intel DG41RQ network card is assembled in my system. by using command ifconfig i can see only lo but eth0 is not displayed their.

View 4 Replies View Related

OpenSUSE Network :: Add Network Manager Notifier In Open Suse 11.3 KDE?

Apr 4, 2011

I mistakenly delete my default panel. How to add the network notifier? Tried to look for the widget but nothing? i need to choose my network connections. And when i look at the Network manager my wireless if black ? It means it didn't detected my wireless?

View 8 Replies View Related

OpenSUSE Network :: Configuring File Sharing On Network Using Suse

Jun 27, 2011

I just installed suse on this computer, and am wanting to allow other computers to store files on it as a file server. I was reading the online manual and in the personal file preferences, it shows an option to enable 'share public files over network'. The problem is I don't see that option when I open up file preferences. All I see is an option to allow sharing using bluetooth, nothing about sharing over the network. When I look in the network I can see the computer running suse, but when I try to connect to it, it says 'unable to mount drive: connection refused by server.'

View 3 Replies View Related

OpenSUSE Network :: Active Directory - Cannot See Suse In Network

Apr 15, 2011

I am attempting to setup a linux file server in active directory. It has been kind of an ongoing project(nightmare) for me... I have tried a few distributions of linux and I have to say I really enjoy openSUSE. YaST is my best friend. Now to the problem at hand.

I have samba installed and configured for the domain. I was able to successfully join the machine to the domain. I can even log on using domain user names and passwords (more than I was able to accomplish with other distros...). Where I am having a problem currently is I cannot see the suse machine from a windows machine. I can access shares from suse to windows though.

View 1 Replies View Related

General :: How To Access A CD / DVD Drive Over Network

Jul 29, 2011

The CD/DVD drive of my notebook is broken. However, the drive from my desktop computer is working perfectly. How can I access the CD/DVD drive from my desktop computer over the network? I want to put a DVD disc there and access it from my notebook.Both computers have Gentoo/Linux. (but the solution ought to work on any Linux distribution)

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved