This might be a really silly question, but I installed Ubuntu yesterday (which is awesome) but I can't seem to locate any of the other drives that I had hooked up. It's as if the partition with the install is the only one in existence. Is there some trick of the trade I'm not aware of or what's up?
View 1 RepliesI have vista and opensuse 11.2 on my computer, the problem is i can't open ext3 partitions from vista but i can the other way. I tried Ext2fsd but the linux partition is always in a read only mood even when i change this option. Also, all folders are empty I downloaded the program as admin and compatable with XP SP2.
View 3 Replies View RelatedMy computer is currently running on Windows 7 and I had a spare partition formatted as ntfs. At first I tried to install ubuntu to that partition. Everything was fine, ubuntu recognized my previously installed OS and all partitions. At some point during the installation, however, it is recommended to have another partition formatted as swap.Then I split the partition into two parts and formatted one as swap and one as ext3 using Acronis Disk Director.
Then I restarted my computer to install ubuntu to new partition. This time it did not recognize any of the partitions and said that "there are no operating system on this computer." The whole disk was appearing as one partition.At that time, I quitted installation and go back to Windows 7, it was working properly. I booted using Acronis Disk Director and partitions were in their proper place.I tried formatting back to ntfs and then to swap and ext3 again, nothing changed. (I also tried several other combinations, nothing worked.)
I want to create a separate partition for /home.inuxMint is *already* installed.PartedMagic be used for the same, NOW
View 14 Replies View Relatedis there a way to access disk druid once all of the partitions have been created in rhel 5.3?
View 3 Replies View RelatedMy partition layout is as follows:
sda1: 14GB / ext4
sda2: 10GB /iso ext4
sda3: 4GB /home ext4
sda4: 86GB Extended
sad5: 2GB swap
I have 84GB free space on this hard drive and want to install another distro. Will I be able to create another / and /home partitions for the new distro?
I am currently using Xubuntu after i used Ubuntu and Kubuntu. So far, i'm preferring it over both. The only problem is I can't access my other partitions. I have my Windows partition and another partition just for storage and such, and I can't access it. I can't even see them using the default File Manager of Xubuntu. I've downloaded Dolphin to try and somehow work it out, and i do see them now but i still can't access them.
Xubuntu 10.10, if it means anything. Also, I do have Xubuntu on a separate partition alone.
My wireless card: TP-LINK 322G + I ask, after the installation is complete debian5.04, how to configure wireless Internet access,
lspci entry:
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
[Code]...
I'm new to SUSE. I had some virus issues with Windows Vista and decided to change my OS.
I have the modem set up and still can't get the internet to come up. I get the mozilla blank webpage, but I am connected to the internet server. What can I do to get full internet access if everything seems to be working they way it should except for the blank webpage? I know I must be missing something but what?
Also, how do I open Yast to use it? I think I opened it by accident and got some things done
How can I access ext4 partitions from windows 7?
View 9 Replies View RelatedI figured I could just go in to my Kubuntu desktop and look at the drive. But it has only a lost and found and grub folder with a few files on the root named config-[version]-server (note this is a SCSI). Guessing I'm looking at the boot partition? So how do I mount the other partitions? When I do a fdisk -l I see 3 sdb 1,2,3 (2 and 3 are large, 1 is my boot partition) but when mounting them I get wrong fs type. I was sure its ext3 ( also tried 2 and 4 )? I just left the default 7.04 fs when I installed it. I'm able to put it in my desktop and my server but for the life of me I can figure out how to get at the data.
View 4 Replies View RelatedI am currently testing for the first time openSUSE.I experience some problems right away, the most important problem:I can not get through the explorer (Dolphin) on another partition.When I try, I read underneath:
There was an error while accessing 'Disk 2'. The system notified:
org.freedesktop.Hal.Device.PermissionDeniedByPolycy: org.freedesktop.hal.storage.mount-fixed
auth_admin_keep_always <- (action, result)
I've already started looking at different solutions. But I'm not familiar enough with KDE to just be able to solve this problem. Anyone have any idea what to do to acces other partitions or drives anyway? Another problem is that the GUI is very slow, moving windows and scrolling is not smooth. Anyone have any idea what I can do about this?
I also have a black taskbar since I've moved it to my main screen as it automatically appeared on my small screen. How do I get it brighter again so the clock is readable again?And finally, the Explorer (Dolphin) has a very annoying behavior, I need only to click a folder to open it then as I really only want to select. How can I make a folder only open when I double click on it?
I can not access NTS partitions .
View 9 Replies View RelatedI`m running Lucid on my laptop. Now I wish to install WinXP in dual-boot mode, but it says there are no suitable partitions for it. I`ve tried to install it on existing ntfs partitions as well as to create a new partition with windows partition manager (the one that is offered in the beginning of the installation), /sda7 is the result, but it won`t help.
View 9 Replies View RelatedI got a laptop that I'd like to install Ubuntu on (I've done this numerous times before). But this one already has 4 partitions on it, and the Ubuntu installer complained that you can't have more than four. I know you can make a logical or whatever partition that holds others sub-partitions, but I'm not sure the best way to do it without destroying data from the other partitions.
The existing partitions include: a recovery partition, the primary windows partition (large size), a small boot partition, and a special partition for hp software that can run without booting windows. Can I convert the windows partition into a logical partition or something like that which can be divided up, without wiping out the windows files and data there?
And yes I know I can use the wubi installer, but I prefer a more permanent solution (Ubuntu is my primary OS, but I don't want to wipe out Windows at this point).
There are 4 drives in my PC. now i have installed natty on it and I can't see other drives except the filesystem. Any tool that can make all my partitions visible. I used live CD to install Ubuntu 11.4
View 8 Replies View RelatedI still have to dual boot with Windows (for now!) but having the various NTFS partitions show up in Nautilaus, etc. is a problem.Also I would like to share some data between Win7 and Ubuntu 9.10 but I cannot create any more partitions due to well know limitations. In my case I already have 3 primary Windows partitions that I want to keep and 1 primary Linux with ext4 and swap as logicals for Ubuntu. BTW my laptop had all 4 primaries used up an I got rid 1 for Ubuntu. I could get rid of more but really do not want to now.
I found many great ideas and suggestions here in the forums but could not find exactly what I was looking for so I cobbled together a couple of I ideas and I think I have a working solution.First to hide a Windows partition and protect it this works great when you add this line to fstab:
Quote:
/dev/sda2 /Windows/sda2 ntfs-3g defaults,umask=777 0 0
Of course change your partition to the correct one and make sure the /Windows directories are created.I have used this many times and it works great except I want to have access to 1 or 2 directories without exposing the whole drive.I turned to symbolic links to help solve but when sda2 is "hidden" with the above there is a rights problem for my normal user. I could probably solve it with umask somehow but I just did this instead:
Quote:
/dev/sda2 /Windows/sda2 ntfs-3g defaults,locale=en_US.utf8 0 0
I found this allows me to access the directory but it is still hidden from Nautilaus. I am guessing it is because it is mounted in a location it does not normally look in.After this I created a symbolic link to the directories I want access like this:
Quote:
ln -s /Windows/sda2/Temp /home/myuser/windir
Note I did not use sudo here because that was causing me rights problems at one time. This is permanent until you rm the windir file since symbolic links are just special files.
So now I can access windir in my home directory on the NTFS partition without me accidentally messing up my other Windows system files. If I try hard I can mess it up but this provides just enough protection for me. I can also drag the link to my desktop or the Naultilaus left nav pane and it acts like a regular directory.I sure there are a 100 ways to achieve what I wanted to do but thought I would share this method since it took me a while to figure it out.
On my system have to partitions instead of ext4 and swap, that is ntfs partitions and have two account one is sysadmin and my name csmct. Sysadmin have admin power and csmct is a user account. If I login ed as user csmct. I cant able access those ntfs files. Ubuntu asking me for the sysadmin password authentication. How can I access those ntfs partitions with rakesh password. For frequent access I changed both passwords to same <snip>
View 7 Replies View Relatedi just installed 11.2 and it works fine,however im not very familiar w/suse.i would like to access my storage partition,but it doesnt show up anywhere?in other distros it shows up in places. how can i access this ,and have it mounted automatically?
View 4 Replies View RelatedTo make a very low level backup of my laptop prior to upgrading it, I decided to create an iso of the harddisk; while it is doing this, but a bit too far to just cancel and start anew, so I cannot test it out right now I decided to post here.
of course, there are partitions on /dev/sda (there's a swap for example)I may (am pretty damn sure I will) want to access the files within the iso, and that's where I wonder how to tackle that; I'm thinking along the lines of setting up a loopback device (losetup) but I don't think that that will be enough to recognize the partitions. Any thoughts? (or just re-create an image of /dev/sda1 ?)
I installed on LUKS+LVM, and I want to preserve my /home without moving the data to any external media (I don't have any). My partition layout is as follows:
sda1: /boot
sda2: encrypted volume (sda2_crypt)
sda2_crypt: LVM volume group, with /, swap and /home.
Having many previous (sad) experiences with completely borked experiments and data loss, I've decided to try the trick in VirtualBox first. I've installed Debian (testing, netinst, Dec 2009) with encrypted LVM, and touch'd a file in my $HOME so that I'd know if the contents were preserved. Then proceeded to install Ubuntu 10.04.1 from the alternative CD. After the installer started and loaded some of the basic components (but before it entered the partitioner) I've switched to a shell and read a scroll of identification:
Code:
$ cryptsetup luksOpen /dev/sda2 sda2_crypt
[entered the passphrase]
$ lvm vgscan
$ lvm lvscan
* Another concern; after the installation, I've noticed that the contents of my $HOME were overwritten by Ubuntu's default skeleton (pictures, desktop, music, templates, and other crap). The control file I've touch'd after installing Debian wasn't there.
How can I get access to my NTFS Partitions in VirtualBox running Windows XP Pro? I saw it somewhere once saying something about setting up shared files but it was confuseing and did not work.
View 1 Replies View RelatedI played a bit with partitions. I'm not an experienced Ubuntu user, neither I have solid understanding of partitioning. And I hardly remember exact actions that led to this problem. I remember that I saw a warning in GParted that said that the partition was out of bounds or something.. But I followed some solution that I found on ubuntuforums and used fdisk to fix that. So, after installation of Ubuntu I couldn't boot into WindowsXP (after choosing Windows entry in grub2 menu I see only blinking cursor on black screen). But what's more important that I can easily mount Windows partition from Ubuntu. Also I tried to boot from Windows repair console and used FIXBOOT command, and copied[url].... and [url].... files to no avail..Here is the summary of what I got now:
Code:
sudo fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders[code].....
Due to a combination of factors, if installing from the Live CD, you must have at least two partitions available. One will be a small (around 200 MB) /boot partition. The / (root filesystem) partition must be formatted as ext4 while the /boot partition must be formatted as ext2 or ext3.
The normal installation CD set and DVDs don't have this issue.
If you choose to install the Live CD and don't follow this scheme (you can, of course, have additional partitions besides /boot and /), the LiveCD won't install.
I have recently installed debian jessie on my laptop , during installation i didn't mount 2 of my partitions , now when i want to access them i have to give the root password every time i click on them , i searched the google , i found that i have to add a line in fstab file : so i i checked the partition that i wanted to mount (by typing fdisk -l) , and i added this line to the end of the fstab file :
Code: Select all/dev/sda3 /mnt/2 ext4 users,noatime,auto,rw,nodev,exec,nosuid 0 0
(i had created /mnt/2 before ) ..... and this is the output of fdisk -l :
Code: Select allDisk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x4a373773
[Code] .....
After adding the line at the end of my fstab file , something strange happened , i rebooted the computer and mate didn't come up , it was a console like screen , i had to access fstab from there to delete the line and enter mate . i did this for 2 times and both times the same thing happened . How can I mount my partition permanently ?
I'm currently running a dual boot (VistaFedora 11) system. I've noticed that the first time I access files on the Windows partition (via Nautilus GUI) I'm prompted for root access. However, on subsequent attempts to access the Windows partition I am NOT prompted for root access (even after I close/re-open Nautilus). My concern is that I'm leaving my root access "open".
View 4 Replies View RelatedI need to access sdc2 & sdc4 from SUSE, have shared the partitions already but i am unable to write data there. I checked permissions, it says only owner can change the permission. I need to get rw access for a normal user. Have chmod it already but it didnt work.
View 9 Replies View RelatedI have a 2GB file which is a dd image of a block device. The block device (a USB-connected flash memory) contains multiple partitions, and therein lies the problem. I want/need to access the various partitions in the image file, but need to do this without actually using a physical flash memory device. If the image was that of a single partition, I could simply mount it on a loop device, and access the filesystem as necessary. However, I can find no kind of virtual block device upon which to write/mount the image.
I've searched the net exhaustively for anything that would seem to allow me to do what I need, but without even a sniff of success. Sadly, I have seen bits of information that suggest "you can't get there from here". Even the outstanding dd tutorial by AwesomeMachine on LQ didn't help. Anyone know of a kind of virtual block device on which a multi-partition image can be written and mounted? Or any other way I can access individual partitions (with various filesystem types on each) and then re-assemble them back to a single image?
I have installed reFIT-based triple boot. Here is the partition scheme:1. GPT Protective Partition (GPT and MFT). Mac OS X (GPT and MFT)3. Windows 7 64-bit C: (GPT and MFT)4. Windows 7 64-bit D: (GPT and MFT)5. Ubuntu 10.04 / (only GPT)6. Ubuntu 10.04 swap (only GPT)Windows only supports MFT and thus sees last two partitions (5 and 6) as unallocated space. Can I somehow make it see these partitions to be able to access files from Ubuntu?P.S. I know this is rather Windows problem, but I don't know any good forums where I can ask that, because mostly on these forums the answer is "Why would you need anything but Windows?".
View 8 Replies View RelatedI'm trying to dual boot F14 along side of Win7 and I'm running into partitioning errors - "Could not allocate requested partitions: not enough free space on disks" I used the Win7 Disk Management to shrink the C: drive by 100G, and the Disk Utility in F14 shows the unallocated space. Here is what the current layout looks like:
--210Mb bootable (sda1)
--168Gb (sda2) --Win7
--105Gb unallocated -- Future home to F14
--31Gb extended (sda 3) -- not sure what this is used for
--31Gb (sda 5) -- Lenovo drivers
--16Gb (sda 4) -- Lenovo restore
Am I running into the partition limit I have been reading about? If so, is there a way to get around this? I really don't want to delete the partitions yet.