i got an Compaq proliant ML530 server that i installed CentOS 5.3 on i tested the connectivity to the LAN and to the WAN and everything worked. Then i ran:
"yum install xen xen-kernel"
and after that i can't connect to the network if i ping my other servers there's no replay. i assume this have to do with Xen bridge. But since the tutorials dont mention any configuration needed, i assumed that it would work out of the box.
I am trying to install CentOS-DS on version 5.4 x86_64. I cannot get to the Extras repo due to lack of wired Internet access. I have wireless (except to server) and I have big UFD drives.
View 1 Replies View RelatedI'm new to SUSE. I had some virus issues with Windows Vista and decided to change my OS.
I have the modem set up and still can't get the internet to come up. I get the mozilla blank webpage, but I am connected to the internet server. What can I do to get full internet access if everything seems to be working they way it should except for the blank webpage? I know I must be missing something but what?
Also, how do I open Yast to use it? I think I opened it by accident and got some things done
I'm currently working on a project in a secure environment with no internet access and I need to install Ettercap and Wireshark on the machines. I thought this would be a simple task of loading Wireshark onto a USB but this did not work and replied with error messages such as: ' Invalid config x86_64-unknown-linux'
what does the error message mean and do I need internet access to install the apps?
Was messing around today and installed kde-standard over my Ubuntu 11.04 install and I played around for a bit but wanted to go back to Unity but I switched it back to Ubuntu at the login and all the menu's are gone, just get my desktop, can right click and was able to make a launcher so I could get online but nothing else.
View 3 Replies View RelatedI've tried to install FEdora 15 using the Fedora 15 DVD for i686 architecture. However, after the step where I chose the setup for GRUB boot options, I got this error: "Some of your repositories require network access but networking could not be setup" (or something similar). Then I only had the option to exit the installer, but after reboot there was no GRUB and I have no means even to boot back to Windows.
How to install Fedora without networking or is Fedora the only distro so messed up that this can't be done? I've tried the Live CD/USB version but that version has no C compiler to allow me to install networking drivers after install completes. Now I was told to try the full DVD, by the full DVD managed to mess up my computer completely.
I'm trying to install Atheros AR9485 wireless card driver on debian, and I had no luck.
I followed this [URL] .... to install backports kernel version. The wireless card worked, however, intel display driver displayed the color in the wrong way.
Red pixels are green, and green are yellow. It was displayed like when someone try to connect a PAL system to a TV that supports only NTSC.
This is my lspci output:
Code: Select all00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Device 0a0c (rev 09)
00:14.0 USB controller: Intel Corporation Lynx Point-LP USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation Lynx Point-LP HECI #0 (rev 04)
[Code] ....
Is there is a way to compile only AR9485 module from the kernel?
Add the following
Code: Select alli915.i915_enable_fbc=0 to your GRUB_CMDLINE_LINUX_DEFAULT= in /etc/default/grub so you would have something like that
Code: Select allGRUB_CMDLINE_LINUX_DEFAULT=" i915.i915_enable_fbc=0 nomodeset quiet splash"
I help develop an Asterisk channel driver that uses USB audio devices to link amateur radio stations via the Internet.All worked well under Centos 5.2 but I recently upgraded to Centos 5.3. I now get either "cannot submit datapipe for urb 0, error -28: not enough bandwidth" followed by a kernel panic or choppy audio depending on the use of either single or multi-TT hubs. For at least 4 devices, things do work under Centos 5.3 if I have a PC with 4 USB ports and do not use a hub. Of course I need to use a hub in most cases errors but even with a single device connected, data seems to be lost resulting in choppy audio. We need the hubs to work for larger systems and PC's with only 2 USB ports.Hardware:
USB 2.0 Audio Device Class 1.0, C-Media CM108
USB 2.0 HUB, 7 port with one TT, NEC UPD720113 or
HUB 2.0 HUB, 7 port with multiple TT's, Genesys Logic GL852.
[code].....
I've just installed CentOS in my PC - removed win 7. and i have a problem in driver installing these are the commands :
make
make install
I've just upgraded my main file server from 10.3 to 11.1 by DVD (I did *not* have a chance to do a zypper up after, so it's the base 11.1 install), and in upgrading my Samba from 3.0.23b to 3.2.4, I seem to have broken winbind resolution of group names. wbinfo -g shows all the right group name entries, and getent group shows that they map to the proper GID numbers... it's just that ls isn't seeing them: I get domain usernames, but the group column is 5 digit numeric GIDs in my defined range. I infer that something broke PAM, but I'm not enough of a PAM jockey to know what. I don't have a pam.d/winbind, but I'm not clear that I'm supposed to. I see that the four pam.d/common-* files were touched, but their contents are the same as the older ones I have.
View 6 Replies View RelatedI'm having a problem where the wired network wired network (eth0) disconnects when the connection is idle for a while (usually tens of minutes). It works fine every time I boot up, but eventually it dies, and I can't ping the machine, or ping anything from the machine. ifconfig shows that it still has an IP address. Running ifdown/ifup causes it to work again. I intend for this machine to be a server, so I can't afford to go restart it when I need network access. sudo lshw -class network gives me this:
[Code]...
I'm a long-time user of Seamonkey, from since it was called Mozilla. The recent 2.1 and 2.2 updates seem to have broken Java support on my Centos 5.5 box (32 bits) and I really can't figure this out. Seamonkey is installed in /usr/local. Starting from 2.1, the /usr/local/seamonkey/plugins directory is gone. As per the release notes, plugins are now managed on a per-user basis in $HOME/.mozilla/plugins So far, so good.
I used to have a link in /usr/local/seamonkey/plugins pointing to /usr/local/jre1.6.0_12/plugin/i386/ns7/libjavaplugin_oji.so (I install Sun's JREs in /usr/local too... it shows my BSD background I guess). So I moved that link to $HOME/.mozilla/plugins but now about :plugins doesn't show any Java plugin detected. Worse, $HOME/.mozilla/seamonkey/<profile name>.default/pluginreg.dat shows that the plugin is rejected.
It contains:
[INVALID]
/usr/local/jre1.6.0_12/plugin/i386/ns7/libjavaplugin_oji.so:$
1232187965000:$
I vaguely suspect that there might be a shared library issue with the newest Seamonkey binaries and Centos 5.5, but then every other plugin works OK, including Flash and all. So what's the issue with the Java plugin? There's no error when I start seamonkey from a terminal window. I must not be the only Seamonkey user on Centos 5.5.
I have just updated my Squeeze system. The update included a newer version of network-manager (and it can not be more than a few hours old). After the update all network functionality on my machine (via knetwork-manager) is broken. The GUI applet has no effect.
Hence can anyone help me: a) Downgrade network-manager by one version; b) Find out what is causing knetworkmanager to break; c) See if the problem is with knetworkmanager or network-manager.
I received stunnel 4.40-0.6.1 as an update from "zypper up" (openSUSE 11.4).After a reboot, stunnel does not work anymore for the programs that need it.Symptom: the program (emacs+mew) hangs for ever, telling me
"Creating an SSL/TLS connection..."
/var/log/messages does not contain a clue and restarting stunnel via
"rcstunnel restart" looks fine:
[code]....
I installed 11.3amd64 as a VM under Vista/VMWare Player - all worked fine. I have now installed it as a physical system. It nstalled cleanly BUT during first boot it could not access the repos. With each repo it gave the message
- download (curl) error for (repo)
- error code connection failed
- error message could not resolve host (repo)
This was followed by a message box containing
- UI syntax error
- no widget with ID 'contents
Firefox could not access the internet (cannot find server) until I disabled IPV6 (I used about:config), now it works fine. I think the repos problem is because of IPV6 - I usually have trouble with IPV6. I tried disabling IPV6 with the following (How To Disable ipv6 on SuSE Linux | Linux Poison)
[code]......
I'm running ubuntu 9.10, and created a softraid5 with no problems. Now i need it to automount with user read/write access, and i need to make some network share folders. My fstab has the following line for the raid:
Code:
/dev/md0 /media/raid auto rw,user,auto,exec 0 0
After i mounted it, i changed the permission with:
Code:
sudo chmod 777 /media/raid/
So now i can create folders and files on it.
Then i created some shares, one with guest access and other with no guest access.
Now the questions:
1) If i access the guest shared folder via WinXP, i create files and folders, but they appear locked on ubuntu, so i cant access them until i change the permissions. If i go to proprieties/Permissions, the owner is "nobody".
2) What password do i need to use on WinXP, and i try to access the non-guest shared folded? Do i need to create a user just for that?
I configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
View 1 Replies View RelatedI have a linux domain (FEDORA CORE 1) and two laptop's which are part of my domain with windows xp pro service pack 2.I have given two ip's to both the laptop's being primary as global and secondary as local.I have configured printer in one laptop and shared.Till last week i was accessing that shared printer from my other laptop and every thing was working fine.Last week i formatted one laptop,(which dose not have shared printer) from then onwards i am not able to access my other laptop. I get the following message when i try to accessmy other Laptop,"you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permission there are currently no logon servers available to service the logon request"P.S : If i have only local IP i am able to see both the systems and i am able to access my printer, this problem comes only when i add global IP to both the machines.And also i have stopped the firewall and other things.
View 1 Replies View RelatedI've recently installed CentOS 5, because I needed a good OS to run VMware Server. Just a heads up, I'm not very familiar with RH/CentOS distros, I usually use Arch Linux. My VMware install went fine, config is standard settings. Now I'm trying to access the VMware Infrastructure Web Access using port 8222 (http) and 8333 (https), but it's a no go. I'm connecting from another machine on the LAN, as the CentOS box is headless. I restarted the vmware services, and they seem to be launching fine. I don't know much about VMware though. I verified with netstat and ports 8222 and 8333 are listening.
View 3 Replies View RelatedI installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies View RelatedInstalled a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).
View 9 Replies View RelatedI have a desktop computer running OpenSUSE 11.2 with two network cards installed. I would like to use both cards for connecting to the internet using different networks. The setting would be the following: eth0 is the main (default) card, almost all programs should use this NIC for connecting to the internet. eth1 is used only by a few programs, which have setting for selecting which network interface to use. The two NIC's are connected to different networks, so the IP address of the NIC's, the related subnet masks and gateways are also different.
Saying short, I would like to have the two NIC's as they would be in two separate computers. I can set the IP address and subnet mask of the NIC's. The main problem is that I can only declare one gateway. How can i setup this? I do not use network manager, I configure network cards using yast, but if needed I can of course use ifconfig directly.
I'm having a strange problem with my network connection/DNS. I turn computer the on and it recognizes and connects to wireless or wired but I can't access any Internet resources or my router. If I ping the default gateway, I get no response and I get DNS errors from any network services that run at start up. If I stop and start the network daemon then it all works fine until the next time I turn on my laptop. It does this for both wireless and wired connection.
I've tried to edit the network interface information in YaST but it says that configuration is handled by knetworkmanager and I have no idea where that information is accessed. I should point out that it all worked fine until I tried to connect to open WAP at my school and couldn't so I connected to the wired network. Next morning I had this problem when connecting to my home network. My questions are 1. What could be the cause of this error and 2. where does one configure the network interfaces when using knetworkmanager
i have 3 comps(running suse 11.3) and a laptop(running vista sp2). i have installed samba on all suse comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.
I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet. the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.
I've installed Ubuntu Server 10.10 with two network cards. One for external, and one internal.My problem is that as soon as i activate eth1 (external), i can't access the server from the internal network (eth0)
With these settings i can't reach the internal network from inside.If i disable the gateway on eth1 and enable the gateway on eth0, it works.
Total Newb here, sorry. I am pseudo-IT at work and have set up a desktop with Debian 5 (accidentally overwrote Windows in the process, but there you go). We are set up with network printers here (all Windows), and I was wondering how to go about being able to print to one of the network printers from my Linux desktop. Can I even connect to the Windows network with this desktop (it is hooked up)? Understand, I do NOT want to screw up anything on the network - they won't let me play anymore if I do. If I download the Linux driver, what do I do next?
View 2 Replies View RelatedNew SUSE 11.3 install connects to network/internet etc OK with DHCP-assigned IP address. When I switch to static IP, I can no longer ping internal network, or anything else. This works OK with SUSE 11.2 on same hardware and (as far as I can see) same setup. Some diagnostics are shown below.
Firewall
Disabling the firewall makes no difference.
Not using a network manager (can't see how to assign fixed address if I do - all greyed out).
ifup eth0:
eth0 device: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
(not sure why the warning - eth0 is assigned to external in the firewall setup).
[code]....
This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
[Code]...
The installer can't see my raid controller (I assume) as I'm getting the following error:"Error opening /dev/mapper/isw_jbhgjgjj_Vol0: No such device or address"It just sees them as 4 individual drives: sda, sdb, sdc and sdd.Please note that I have set up the RAID 5 in the controller bios interface and the image name is Vol0, which it seems that it tries to load but for some particular reason it can't.I have also tried different bios settings and nothing worked.
View 3 Replies View RelatedMy problem is that I'm trying to install CentOS 5.4 x86_64 DVD ISO on Supermicro X7SBI server with installed Adaptec RAID 3405 controller.
I created RAID 5 array and is working fine (adaptec status says Optimal) but I can't install CentOS to that array (1.5TB size).
Whenever I try to install with: linux dd
I'm asked for a driver, which I have downloaded from Adaptec site and extracted contents to USB drive (in installation found as /sba1) which has now a lot of IMG and some ISO files on it.
I try to load (I simplified names) RHEL5.img, CENTOS.img... with x64 names (one exact name: aacraid driverdisk-CentOS-x86_64.img) and I always get the error message: "No devices of the appropriate type were found on this driver disk"
This is going on for a week now and I can't find the right driver or something I'm doing wrong to get install done.