I have just installed Ubuntu 7.04, Wine and Vlc. All my videos and mp3 files can play but with no sound or error massages. I am using Vlc for both videos and sound.
View 1 Replies
My gateway laptop shuts down either imediately after booting, or while I'm online, usually within the first 5 minutes. I have a laptop cooler and aima fan at the laptop while using it. Could it be the hard drive? Is there any way of knowing before I buy a new hard drive?
View 5 Replies View RelatedI bought a new laptop having the following specs:Processor: Intel I5RAM: 6GBHD: 500 GBVideo card: nvidia with cuda with 1 GB RAM.My Hard Disc already has 3 partitions: C=448 GBs (where windows 7 is installed=64 bit) D:Recovery (16.5GBs) and E:HP_TOOLS (99MB).I want to have dual boot and install linux also. BUT I dont want to delete the other partitions as well. How do I do that?Am I able to shrink C partition without disturbing windows installation and creat another partition in C drive? What it will be called: Primary or logical partition?
View 3 Replies View RelatedI tried to dual boot my lenovoT6570 with Fedora14 and win7. But the linux becomes extrememly slow and the firefox window cannot even be clicked. I reinstalled the linux again but the same problem persists. Is it compatible with dual booting? any solution or suggestion?
View 1 Replies View RelatedMy friend has a HP Pavilion dv2699ea (dv2500 series - somehow *shrugs*) that has stopped working. It's a Core2Duo laptop with a Nvidia GPU. The unit is no longer under warranty. Problems first started a few days ago with the laptop showing corrupted graphics in Windows and BSOD'ing after a few minutes of use. I tried booting to an Ubuntu LiveCD which worked for a while before succuming and crashing as well. The freezing/graphics corruption/BSODing does seem somewhat heat related (CPU runs at ~95'c under load) however I believe that if it is heat related, then it's already damaged components inside.
Now the system has corrupted graphics on bootup[1], including booting Ubuntu[2], and neither operating systems will boot at all (Windows can sometimes get logged in before showing a black screen and becoming unresponsive. Ubuntu just looks like [3] after X starts). (See comment below for links.)
The fact the problem occurs both under Linux and Windows says to me this is not a driver issue. I have run Memtest which passed fine and none of this seems HDD related as I managed to get ~30GB of data off the system before it finally gave up the ghost.
She has been using it repeatedly without giving it adequate ventilation for years (i.e. on the bed, or on a pillow), so it's my opinion that the system board has probably warped over years of cooling/heating and that's causing this current problem. If that is the case, then I can buy a replacement system board and fit it myself, saving about £200 over the cost of an out-of-warranty HP repair. Of course, I don't want to make her spend £100 on a replacement part for it to be the wrong thing, hence asking for a second opinion here!
Hopefully I've covered all the bases here. I'm a former IT support guy myself, so I've tried all the dumb stuff (driver updates, examining memory dumps from BSODs [one 'unrecoverable hardware error', three relating to the graphics card], etc).
I have installed Ubuntu 9.04 on my HP dv5-1235dx laptop, can play music but no sound is heard from the speaker
View 5 Replies View RelatedI just got a new Laptop, HP Compaq Presario CQ42, I installed Ubuntu 10.04LTS and all is running fine but no Sound from the in-build Speakers or Head-Phones. I replaced Ubuntu with Fedora13 and Sound works fine. how to get the Sound working in Ubuntu? All Sound-Settings in Ubuntu are set to 100%, nothing muted.
View 4 Replies View RelatedI cannot get sound out of the headphone port on a laptop. Headphones are plugged in, and sound comes out of the internal speakers. Windows behaves normally (sound switches to headphones when headphones are inserted).
It did work in Linux at one point, but something changed, we're just not sure what. Rebooting doesn't fix. This appears to occur whether or not PulseAudio is running. code...
This works in Windows: You plug headphones in, the internal speakers stop making noise, and noise comes out the head phones. Windows says I only have two sound cards: the HDMI port (which I don't care about) and the "sound card", which it claims is a "Conexant Pebble High Definition SmartAudio" In Windows, both the internal speakers and the headphone jack show up as one soundcard, which in my experience, is typical. (This is a laptop)
I have trying to figure out for the past two weeks why the internal speakers are not working with Ubuntu 10.04.
Have gone as far as upgrade alsa but gosh...! However, if i use external speakers, the sounds play very well.
I like ubuntu and i would not like to go back to windows..
How to resolve the sound issues on ubuntu 10.04 with laptop compaq 610?
i buy a laptop and install fedora 11 in it but no sound after installing fedora 11 in my laptop (hp dv3655).
View 5 Replies View RelatedI have configured my sound drivers several time. But after booting there is no sound.
View 9 Replies View Relatedi have no sound on my laptop and my browser says missing plugin i tried to download adobe flash player but even if i load it does not go away.i downloaded skype too and loaded it but can run it , it says cant read
View 7 Replies View Relatedi have a acer 8930g laptop with mint 7 installed can't get sound to work. found my way round the nvidia graphics to get the screen to work but lost when it came to get the pc speakers and sound card to worki have set the preferences to auto detect but at a loss as to the logical steps i need to take.
View 2 Replies View RelatedI am new to fedora 13. My problem is that I can not hear any sound from my laptop's internal speakers (that works f9 in windows--so no h/w probs!) but when I connect external headphones, everything is heard.I have tried several commands from various internet sources since past one week. I don't understand many of the commands that I have run, but that has somehow helped me to run media files and hear sound on HEADPHONES.
View 8 Replies View Relatedi have a hp compaq nc6220 laptop running linux mint 9 isadora. the problem is the mute button on the keyboard is orange and i have no sound at all. the volume icon at the bottom is not muted.
View 14 Replies View Relatedthis may seem a little odd, but I used my server to install Ubuntu on to an external hard drive. (long story short, the server won't recognize any internal hard disks with any type of video card installed. The video card works just fine when installed, and it will read both CDs/DVDs and USB drives just fine, it just refuses to even notice hard disks. I'm assuming an IRQ issue, but I've tried changing them with no success.) Having installed Ubuntu 10.04 on my external 250g hard disk, I attempted to boot it from the USB drive, since the system has that option. It tells me "error: out of disk" and goes to the Grub rescue prompt. Having followed multiple threads and advice posts, including on this forum, I was unable to resolve the issue. For s'n'gs, I hooked affore mentioned external hard disk to my laptop and tested it. Boots just fine. Then hooked it back to my server to see if it would boot. Still no dice [Just a side note, no the video card is not currently installed in said server, I was testing it to see if the thing would install and operate alright before I tested it with video card installed. Only ever make one change at a time, that way if something explodes, I know what caused it.] My initial objective was to get an operating system that would boot with the video card installed. Any ideas what might be going wrong here?
View 2 Replies View RelatedLast week I installed Zoneminder so I can have some webcam security and I let it run on Mocord (motion detection record) for 24 hours just to see how it worked and run some tests. After that 24 hours I changed it to Monitor so that it wouldn't record anything and wouldn't fill up my 320 gig drive but even after I did that the webcam LED stayed on. Not sure if this is normal, I guess it is since it is still using the webcam, just not recording. I don't think. 2 nights ago I was using it to watch videos online and it was a little slow but was still good enough.
This morning I unplugged it and brought it downstairs to use it but when I opened the lid the hard drive LED was constant and the mouse was all jumpy. Anything I clicked on took a minute to register and the disk utility that I tried loading 2 days earlier looked like it was still loading. I couldn't click anything because the hard drive was running like crazy. Or processor or whatever that light is. So I held the power button, rebooted and nothing on the menu bar was loaded and the hard drive was going crazy again, still couldn't click on anything.
So I rebooted again and this time it gave me a popup before the desktop loaded:
There is a problem with the configuration server.
(/usr/lib/libgconf2-4/conf-sanity-check-2 extend with status 256)
So I click Close and it boots to a black background with huge icons and there are obviously no drivers loaded. There's now a new error message:
GConf error: Faield to contact configuration server: the most common cause is a missing or misconfigured D-Bus session bus daemon. See [URL] for information. (Details - 1: GetIOR faield: GDBus.Error: org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process /usr/lib/libgconf2-4/gconfd-2 received signal 6)
All further errors shown only on terminal. And then it does nothing, all the menus say KDE. Webcam LED is still on though since Zoneminder runs as a service on Apache. It's a dual core Dell Studio 15 laptop with all the newest updates and I have 3 separate partitions on my install: /, /home, SWAP. My / partition has 2 gigs free according to KDE and my /home partition has 124 gigs free.
Errors occurred when booting F12 on my laptop.
Code:
Mounting local filesystems: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
...
Starting system message bus: [FAILED]
[Code].....
You have to define PLUGINS in /etc/sysconfig/sipwitch before running sipwitch
Then the system froze there. Press Ctrl+Alt+F2 can enter command line mode.
I have two graphic cards on my laptop, one is Intel and the other is Nvidia. There seems to be something wrong with the Intel card and I changed into the Nvidia card to boot. Then the errors occurred. The driver of the Nvidia card has not been installed. How can I start my network in command line mode? I cannot enter graphic mode now.
Fedora 14 on my laptop has randomly decided that it hates me. The system stops booting after "starting atd", right when its starting X. It "hangs" after the fedora logo, though it will reboot when I try "ctrl-alt-delete". I can see that haldaemon is failing to start, and when I boot the kernel with "selinux=0" it gives me an error message:
error while loading shared libraries: libdbus-glib-1.so.2: cannot open shared object file: No such file or directory. NetworkManager fails with same message. the .so file is in its proper directory, where it has been all along. I've tried booting into runlevels 2 and 3. No luck there either. It'll boot to the login prompt, but as soon as I under my userid the screen flashes. I managed to get the error message it was giving me before the flash: inconsistency detected by ld.so: dl-open.c: 503: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT` failed!
I can boot into single user mode just fine. I've checked dmesg and Xorg logs, but I honestly don't know what I'm looking for (and I imagine that those logs would be useless if I boot into runlevel 1, since the error is at higher runlevels. But I can't get the logs for those because the computer just hangs. SSH and networking are never enabled before the hang.)
I'm at a loss here. I use the machine for both school and work [and I have quite a bit of both to do today] and I've been trying to get it to boot normally for hours now. Anyone have any ideas that I could try?
I have samba network sharing working between an ubuntu box and an xp laptop. xp laptop does not need login when booting up. however, a vista laptop does not even show-discover the ubuntu machine the vista laptop you logon with a password to use when booting up. both xp and vista laptops are on the wireless LAN and the ubuntu box is on the wired LAN. internet works on all 3 So what to do with vista box to make it even see the ubuntu box? Vista laptop did discover several upnp softwares running on the ubuntu box, but does not see the ubuntu shares, etc
View 4 Replies View RelatedI'm having trouble installing Ubuntu 10.10 from my USB SanDisk Cruzer to my ThinkPad x60s. I configured the USB exactly as directed by the Ubuntu website's instructions, and booted the laptop from the USB. Things went well until the installer informed me that the installation was complete and I needed to restart the computer. I clicked on the button to do so, but when the computer restarted it displayed a list of error strings like thus:
end_request: I/O error, dev sbd, sector xxxxxxxx
end_request: I/O error, dev sbd, sector xxxxxxx2
end_request: I/O error, dev sbd, sector xxxxxxx3
Restarting the computer again with the USB brought up the regular installation menu. Restarting without it brought up a blank black screen with a blinking cursor. I attempted to execute the entire process again (format and reinstall) with the exact same results. How can I finish the installation and access the operating system?
System:
Lenovo/IBM ThinkPad x60s
1 GB RAM
Core Duo 1.83 Ghz
Ubuntu Version: 10.10
USB Drive: SanDisk Cruzer
I've had Ubuntu running standalone on a separate machine for a little while, and wanted to give dual-booting a try with my HP Pavillion DM4 laptop, which is relatively new and came shipped with Windows 7.
I got Ubuntu 10.10 installed fine, but upon restarting and selecting Windows 7 from the Grub boot menu, I get the Windows 7 splash screen, about a milisecond of some flavor of the "Blue Screen" (I can't read any of it because it goes away after less than a second), and then am informed that I need to repair my Win7 installation.
Used the Win7 repair CD, which does absolutely NOTHING- doesn't find my OS, partitions, or anything. If I select the "Automatically Repair..." option, I am informed that CHKDSK failed because a volume on the system is corrupt.
I know Ubuntu can be installed from a USB thumb drive but I have a unique problem. My CD drive in my laptop doesn't work any longer and I have no way to replace it. I know I can place Ubuntu on the flash drive but the bios in my laptop does not allow booting from USB and not ROM update for the laptop. So my question is, since this laptop does have Win7 on it, I can partition the drive to make room for a dual boot, but how do I get Linux on the new partition with out a CD Drive or bootable usb?
View 5 Replies View RelatedMy laptop doesnt support USB booting, has no optical drives but does have an FDD.If copy the install folder onto a USB drive, boot from a floppy and load USB drivers for the drive, can I then install from there without issue?
View 2 Replies View RelatedIm looking at getting a laptop and dual botting it with ubuntu and windows and my boss said when he did that on his laptop it caused all kind of problems, but that was 2-3 years ago. Is it still a big buggy doing this or should i be able to dual boot on any laptop i get?
View 4 Replies View RelatedI have at office dual booting Fedora14 + Windows 7 in Laptop Lenovo G550. I am using it regularly for work. Recently it stopped normal shut down. It showed some panic message first time and i have to force shut down.It boots normally. Now it does not give any message during Shut down but it does not shut down properly. Every time i have to force shut down.I am ready to follow instructions from forum members. I want to know that how much serious this panic is. Will it result in corruption of installation?
View 5 Replies View RelatedI have tried the following techniques to try and boot from CD on my Acer Aspire 5515 laptop: Change SATA information to Native in BIOS. Set the Boot order for the CD/DVD Drive to start first, along with Main driver starting second.
INFORMATION
My laptop is an Acer Aspire 5515.
BIOS Version is V1.0 (latest) from Acer.
PhoenixBIOS bios (?).
I have still not been successfully able to boot from CD. No matter if it says to boot from CD/DVD Drive first, it skips on to Main driver and starts Windows. It's not because I didn't burn the .ISO image right, because it worked on my desktop, which is ALSO an Acer, an Acer Aspire T180. What I am trying to do, is install Windows XP Professional, and dual-boot it with my Windows Vista. Only thing is, it WON'T boot from CD.
I am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode
View 4 Replies View RelatedI installed debian wheezy on my Acer laptop (5830tg) and everything worked fine. then a couple of months ago, I replaced my internal hdd with a bigger one, and moved the working old drive in a usb enclosure, so now i boot debian from usb, and keep windows on the internal. The problem is that when i boot from usb I get no audio from the speakers, just from headphones, but if i connect the hdd to the internal sata bay it works like a charm.
View 0 Replies View RelatedI am using a linux kernel 2.6.36 using mips architecture. I have succesfully booted the machine through Flash memory, but it is not booting through nfs. It is getting stuck at the stage where the image starts loading. In short the vmlinux.img file is being copied properly to nfsroot but the image is not loading.
View 5 Replies View Related
