Ubuntu Installation :: BIOS In Laptop Not Allow Booting From USB
Mar 31, 2011
I know Ubuntu can be installed from a USB thumb drive but I have a unique problem. My CD drive in my laptop doesn't work any longer and I have no way to replace it. I know I can place Ubuntu on the flash drive but the bios in my laptop does not allow booting from USB and not ROM update for the laptop. So my question is, since this laptop does have Win7 on it, I can partition the drive to make room for a dual boot, but how do I get Linux on the new partition with out a CD Drive or bootable usb?
View 5 Replies
ADVERTISEMENT
Apr 17, 2010
I am trying to install Ubuntu 9.10 on a laptop. The laptop does not have working cd-rom or an operating system installed. I was hoping to install via USB cd-rom. The bios is an old one and will not allow booting from USB. Does anyone know of a way for me to install?
View 2 Replies
View Related
Jul 17, 2010
I have a Sony VAIO AR series, it contains two separate 120GB hard drives that were originally configured in a raid. They're called hd0, and hd1. I disabled the raid and partitioned hd1 in 3 ways, one medium sized partition for the operating system (ext4), one large partition for storage (ext4) and one small partition for Swap space. I then installed Ubuntu onto hd1 with help from UNetbootin. After installation went fine I loaded up Windows installer, created two NTFS partitions, one medium and one large, and installed Windows 7 of the medium sized partition. Now I can't figure out how to boot into the Ubuntu side on hd1. Needless to say, in Windows, hd1 is not visable at all. I can see my two NTFS partitions fine.
When booting up I go through two main screens. The first screen "Matrix Storage Manager Option ROM," lists the physical disks (0, and 1.) and gives me the option to enter configuration with [cntrl+i]. The second screen gives me a list of options to boot from, Yet they are all Windows options and many are redundant. The list includes "Enter Command Line," which when selected tells me "Boot failed! Press any key to enter command line." command line brings me to "grub>" I tried booting Ubuntu from this command line, but don't have much to work with here. I followed this guide, but it didn't take me to completion and I'm not sure where to go from here. http://www.mepis.org/docs/en/index.p...m_command_line
[Code]...
View 3 Replies
View Related
May 8, 2011
If an old bios and mainboard is being used, such that it cannot handle the large size of HD, then is it useful to say use a live CD and from its initial menu (pressed a key), choose 'Boot From First Hard Disk'? Would this be similar in getting around a bios and disk size limitation I wonder - like - does the use of a live CD in this way avoid using the bios to point to the active partition??
The reason for asking is that a friend has a couple of quality old rack mounted server machines and wants to use Ubuntu having now fitted 80 GB empty drives. Live CD seems ok, and 11.04 install goes ok but on boot up grub comes back with an error.
I recall that early machines cannot see larger(?) HDs for booting purposes even though installs go ok in very large HDs. I wondered if a live CD to boot up temporarily - trouble shooting - would be worth trying for this reason, or am I way off?
View 8 Replies
View Related
Jan 18, 2010
I've been searching the forums for any posts that cover my problem, but most of the booting problems I've found are different from mine.Anywho, the situation:ell laptop, 2 partitions, first is Windows XP, second is Ubuntu Karmic.Whenever I turn on my computer the first loading screen that shows up (is this the BIOS? Excuse my little knowledge of this stuff), before GRUB loads, is really slow. It takes about a minute to load.However, whenever I restart from my XP partition, it suddenly loads fast! And this does not happen when restarting from my Ubuntu partition or anything
View 7 Replies
View Related
Nov 26, 2010
I'm having trouble installing Ubuntu 10.10 from my USB SanDisk Cruzer to my ThinkPad x60s. I configured the USB exactly as directed by the Ubuntu website's instructions, and booted the laptop from the USB. Things went well until the installer informed me that the installation was complete and I needed to restart the computer. I clicked on the button to do so, but when the computer restarted it displayed a list of error strings like thus:
end_request: I/O error, dev sbd, sector xxxxxxxx
end_request: I/O error, dev sbd, sector xxxxxxx2
end_request: I/O error, dev sbd, sector xxxxxxx3
Restarting the computer again with the USB brought up the regular installation menu. Restarting without it brought up a blank black screen with a blinking cursor. I attempted to execute the entire process again (format and reinstall) with the exact same results. How can I finish the installation and access the operating system?
System:
Lenovo/IBM ThinkPad x60s
1 GB RAM
Core Duo 1.83 Ghz
Ubuntu Version: 10.10
USB Drive: SanDisk Cruzer
View 1 Replies
View Related
Jan 29, 2010
My laptop doesnt support USB booting, has no optical drives but does have an FDD.If copy the install folder onto a USB drive, boot from a floppy and load USB drivers for the drive, can I then install from there without issue?
View 2 Replies
View Related
Jun 10, 2011
Im looking at getting a laptop and dual botting it with ubuntu and windows and my boss said when he did that on his laptop it caused all kind of problems, but that was 2-3 years ago. Is it still a big buggy doing this or should i be able to dual boot on any laptop i get?
View 4 Replies
View Related
Feb 25, 2010
I have tried the following techniques to try and boot from CD on my Acer Aspire 5515 laptop: Change SATA information to Native in BIOS. Set the Boot order for the CD/DVD Drive to start first, along with Main driver starting second.
INFORMATION
My laptop is an Acer Aspire 5515.
BIOS Version is V1.0 (latest) from Acer.
PhoenixBIOS bios (?).
I have still not been successfully able to boot from CD. No matter if it says to boot from CD/DVD Drive first, it skips on to Main driver and starts Windows. It's not because I didn't burn the .ISO image right, because it worked on my desktop, which is ALSO an Acer, an Acer Aspire T180. What I am trying to do, is install Windows XP Professional, and dual-boot it with my Windows Vista. Only thing is, it WON'T boot from CD.
View 7 Replies
View Related
Mar 17, 2010
i have a peguin computing 130 server running ubuntu server 9.10 and today i open the box to removed one of the hard drives that wasn't being used and the server is no longer booting to the bios.
i have removed the ram and placed it back but notting is showing up. Every time i turn it on it doesn't show anything not even the bios.
View 4 Replies
View Related
Mar 19, 2010
I just purchased a shiny new LG 10x BD-ROM Combo drive. I installed it without problems. The rest of my system consists of:
MSI k9a2 platinum mobo
AMD Phenom 9950
3x SATA HDD
nvidia gtx260
That's probably everything pertinent. I have the SATA HDDs installed on SATA ports 1, 3, 4 (not the promise slots, 5 & 6), and the BD-ROM installed on SATA 2. I don't think that's an issue, though. I did replace a working sony opiartic (sp?) DVD-RW, so I don't suspect any cable issues (for that and for other reasons).
note: "restart" = "reboot via restart", as opposed to power down & turn back on.
1. I turn on the power. BIOS posts that it sees the BD-ROM in the SATA 2 spot.
2. I boot into Ubuntu 9.10 (updated with the latest x.20 kernel). It does take a little longer than usual to load between the grub menu and the login.
3. After login, the device shows up as cdrom0 in the "Places" menu. Clicking on it returns an error whether a disc is in the drive or not. At this point, however, the open/close button on the drive no longer works. Its as if it's lost all power or connection or something.
4. When I restart, BIOS hangs a while while posting. It shows only devices on SATA ports 1, 3, & 4. It's as if the BD-ROM doesn't exist anymore.
[code]...
lspci and lspci -vvnn show nothing... well, technically they show everything BUT the drive. I'm planning on purchasing a second BD-ROM (different manufacturer, if I can help it), to test later, but I don't have high hopes. It could be a motherboard issue, I suppose, but updating the BIOS from 1.4 to the latest version (1.9) solved nothing. I don't suspect it's the hardware, though, since it works fine in Win7. I imagine that the culprit is linux/ubuntu, and I need some help figuring out if this is a fixable problem. I've been really, really happy with Ubuntu and linux in general. Ubuntu is my primary OS, with Win7 as my backup in case of emergencies, but I'm seriously considering wiping linux & using Win7 exclusively altogether with this severe hardware issue.
View 3 Replies
View Related
Jul 14, 2010
Is it possible that grub can load usb driver because BIOS of my computer is 10 or more years older. Currently in grub if I run
root (<press tab>
I get
fd0 hd0
meaning so far floppy & hard disk can be accessed. I am using ubuntu 8.04 .
View 14 Replies
View Related
Jul 10, 2010
I have an HP motherboard w/P4 with 40 GB disk another Maxtor 500GB Hard disk on the usb. Problem: On start up with device selection for booting, my pen drive always gets listed as USB HDD0 and USB HDD1 and Iam able to boot thru' them. However my Maxtor HDD in the first partition of which I have installed FC 13 after much pain,so as to not disturb my existing installation FC 11 in internal drive. This device itself is not visible, nothing to have to say about its partitions in bios list of devices to select. Whether this is a drive related problem or bios related. How may I make it visible in bios list.
Further note: Fedora core 13 installation didn't worry about the windows XP and Fedora 11 installation in main drive. It allowed for installation of the individual boot loader in the installation drive itself.
Bios not recognising this drive precluded access at boot from grub.conf of the exising FC 11 installation too.
View 1 Replies
View Related
Nov 24, 2010
I'm about to install the Smart Boot Manager rpm so that I will be able to boot from my usb. My bios doesn't support booting up from the usb port. Will this cause conflict with grub?I currently have Fedora 14 installed and about to install CentOS 5.5.
View 10 Replies
View Related
Jun 8, 2010
I have some trouble booting the current KDE Live Cd (11.2) on my Laptop. I tried USB and CD both. The laptop hangs on the bios bootscreen and I cant select any further option like a boot device. No problem I have with an Ubuntu CD.
View 9 Replies
View Related
May 11, 2010
I have CentOS 5 running on my machine "Appro 1122hi". Now i need to replace centOS with RHEL 4.
Steps Followed is, i changed the bios setting to start booting form CD.
when i try to boot form CD i get "PXE-E61 media test failure, check cable" error
Hardware details. AMD opteron processor 248, 64 bit machine and 16 GB ram.
View 9 Replies
View Related
Feb 18, 2011
I probably have not done any serious programming for 20 years, not counting a little HTML.
I stumbled onto an old FREESPIRE disk my bro sent me several years back -- and tried installing it on a Sony Vaio PCG FRV 28 I had crashed a few years back. The Sony bios is still aboard, but old enough to not have USB "booting" as part of the boot menu. I don't even know if one can easily hack into the BIOS on an old sony Vaio but changing the BIOS would solve lot of problems.
Does anyone have any ideas or certain knowledge on rewriting or modifying the Master Boot Code or an idea on making my USB [with Ubuntu or any other Linux implementation visible] and bootable to the bios on powerup?
View 8 Replies
View Related
Oct 5, 2010
I bought a ChemBook laptop which I have installed Ubuntu Linux on. It has an AMI BIOS. There is a password on the BIOS so I can not change its configuration. The laptop does not have a 3.5inch floppy. How do I reset or remove the BIOS password so I can access it and make my own changes and set up my own password?
View 4 Replies
View Related
Feb 24, 2011
I had to change disk order in bios and now I am unable to boot SUSE. My sda is now sdc(disk ID is still the same in fstab). Should I reinstall GRUB to MBR of hd0 or I will need to do something more.
View 2 Replies
View Related
Feb 9, 2011
I'm trying to boot an SD card on a notebook that does not have BIOS support for booting from the SD slot. Using various how-to's I've figured out how to add additional SD card modules to the initrd.img file on a bootable USB drive such that I can boot Linux installed on the SD card.
However, best I can tell, it loads the kernel and initrd.img from the USB and everything else from the SD card. What I really want is to load the necessary SD modules from the USB and then chainload the SD card such that whatever kernel is on the SD card is loaded instead. Is it possible to chainload to another bootable device after the kernel (with the SD module additions) has already been loaded?
View 14 Replies
View Related
Jun 8, 2010
I installed REL 5.5 on this Dell laptop (originally win 7) and everything works ok except when i get to the login GUI the LCD brightness (or lack of) sets to it's lowest so i have to click the f5 button to brighten the screen. If I log out, the LCD resets to the dimmest setting (can hardly make out the login GUI) and again I have to click on f5. I believe I need to update the BIOS but I don't know how. The BIOS update I dound on-line if a xxx.exe file.
View 1 Replies
View Related
Apr 4, 2009
I'm not sure if the forum hardware is the appropriate one... Excuse me if it isn't. I've a laptop fujitsu with a broken keyboard. I need to modify some BIOS parameters, but without ps2 port, I can't access in it. The a usb keyboard is not recognized.
View 2 Replies
View Related
Jun 8, 2010
I come bearing a question that I hope I can get some info on. Here's the situation: I installed Ubuntu 10.04 Netbook Remix on my Acer Aspire One (didn't want it, but got it for free). I installed and am dual booting it with windows 7 basic. Both worked fine until this morning when the laptop ran out of battery and shut down.Now, on start up, the BIOS screen flashes, and its not the same BIOS screen, but I can't tell what it says, its moving too fast, the laptop then restarts. This problem may be bigger than the linux part of it
View 9 Replies
View Related
Sep 20, 2010
i started the installation programme and it went through a couple of options then says it has to restart the laptop when i restarted i got this message before the bios screen and then the computer does nothing
" Booting GRLDR.....
Turning on gate a 20 .... Success
Srating cmain() .... _"
View 3 Replies
View Related
Jun 7, 2011
i am working with an old system that uses a BIOS meant for embedded systems. According to my coworkers this thing boot some version of debian about two years ago. currently I have used there old image and a new one I made of the latest Debian stable build. both images fail to get passed grub.
to be clear the BIOS simply replies "loading grub" takes ten minutes and then crashes.
has anyone ever had trouble with grub crashing systems? this problem seems odd since is did boot with this two years ago and i still have that image.
View 4 Replies
View Related
Mar 10, 2011
this may seem a little odd, but I used my server to install Ubuntu on to an external hard drive. (long story short, the server won't recognize any internal hard disks with any type of video card installed. The video card works just fine when installed, and it will read both CDs/DVDs and USB drives just fine, it just refuses to even notice hard disks. I'm assuming an IRQ issue, but I've tried changing them with no success.) Having installed Ubuntu 10.04 on my external 250g hard disk, I attempted to boot it from the USB drive, since the system has that option. It tells me "error: out of disk" and goes to the Grub rescue prompt. Having followed multiple threads and advice posts, including on this forum, I was unable to resolve the issue. For s'n'gs, I hooked affore mentioned external hard disk to my laptop and tested it. Boots just fine. Then hooked it back to my server to see if it would boot. Still no dice [Just a side note, no the video card is not currently installed in said server, I was testing it to see if the thing would install and operate alright before I tested it with video card installed. Only ever make one change at a time, that way if something explodes, I know what caused it.] My initial objective was to get an operating system that would boot with the video card installed. Any ideas what might be going wrong here?
View 2 Replies
View Related
May 23, 2011
Last week I installed Zoneminder so I can have some webcam security and I let it run on Mocord (motion detection record) for 24 hours just to see how it worked and run some tests. After that 24 hours I changed it to Monitor so that it wouldn't record anything and wouldn't fill up my 320 gig drive but even after I did that the webcam LED stayed on. Not sure if this is normal, I guess it is since it is still using the webcam, just not recording. I don't think. 2 nights ago I was using it to watch videos online and it was a little slow but was still good enough.
This morning I unplugged it and brought it downstairs to use it but when I opened the lid the hard drive LED was constant and the mouse was all jumpy. Anything I clicked on took a minute to register and the disk utility that I tried loading 2 days earlier looked like it was still loading. I couldn't click anything because the hard drive was running like crazy. Or processor or whatever that light is. So I held the power button, rebooted and nothing on the menu bar was loaded and the hard drive was going crazy again, still couldn't click on anything.
So I rebooted again and this time it gave me a popup before the desktop loaded:
There is a problem with the configuration server.
(/usr/lib/libgconf2-4/conf-sanity-check-2 extend with status 256)
So I click Close and it boots to a black background with huge icons and there are obviously no drivers loaded. There's now a new error message:
GConf error: Faield to contact configuration server: the most common cause is a missing or misconfigured D-Bus session bus daemon. See [URL] for information. (Details - 1: GetIOR faield: GDBus.Error: org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process /usr/lib/libgconf2-4/gconfd-2 received signal 6)
All further errors shown only on terminal. And then it does nothing, all the menus say KDE. Webcam LED is still on though since Zoneminder runs as a service on Apache. It's a dual core Dell Studio 15 laptop with all the newest updates and I have 3 separate partitions on my install: /, /home, SWAP. My / partition has 2 gigs free according to KDE and my /home partition has 124 gigs free.
View 1 Replies
View Related
Jan 1, 2010
I have samba network sharing working between an ubuntu box and an xp laptop. xp laptop does not need login when booting up. however, a vista laptop does not even show-discover the ubuntu machine the vista laptop you logon with a password to use when booting up. both xp and vista laptops are on the wireless LAN and the ubuntu box is on the wired LAN. internet works on all 3 So what to do with vista box to make it even see the ubuntu box? Vista laptop did discover several upnp softwares running on the ubuntu box, but does not see the ubuntu shares, etc
View 4 Replies
View Related
Feb 1, 2011
I've had Ubuntu running standalone on a separate machine for a little while, and wanted to give dual-booting a try with my HP Pavillion DM4 laptop, which is relatively new and came shipped with Windows 7.
I got Ubuntu 10.10 installed fine, but upon restarting and selecting Windows 7 from the Grub boot menu, I get the Windows 7 splash screen, about a milisecond of some flavor of the "Blue Screen" (I can't read any of it because it goes away after less than a second), and then am informed that I need to repair my Win7 installation.
Used the Win7 repair CD, which does absolutely NOTHING- doesn't find my OS, partitions, or anything. If I select the "Automatically Repair..." option, I am informed that CHKDSK failed because a volume on the system is corrupt.
View 7 Replies
View Related
Jan 14, 2010
I bought this laptop several years ago. It had Vista. Just long enough for me to download SUSe, nuke and pave the HD and install Linux. Recently I upgraded from 1 GB to 4 GB of RAM, the maximum that is allowed given the motherboard (based on from what I am able to learn the Intel 945 chipset).
After upgrading to 4 GB, the machine (according to "My Computer") only sees 2.9 GB. I understand that under an earlier version of the BIOS that the machine would not recognize the RAM correctly. Additionally the "My Computer" page lists the display as "Intel 945GM". My problem is that I can find no Linux utility to flash the BIOS on this machine-- Toshiba only provides the BIOS included in an .exe file for either XP or Vista. I am hesitant to use the BIOS for the Intel 945 series motherboards from their site.
View 3 Replies
View Related
