Ubuntu :: Laptop Doesn't Need Login When Booting Up
Jan 1, 2010
I have samba network sharing working between an ubuntu box and an xp laptop. xp laptop does not need login when booting up. however, a vista laptop does not even show-discover the ubuntu machine the vista laptop you logon with a password to use when booting up. both xp and vista laptops are on the wireless LAN and the ubuntu box is on the wired LAN. internet works on all 3 So what to do with vista box to make it even see the ubuntu box? Vista laptop did discover several upnp softwares running on the ubuntu box, but does not see the ubuntu shares, etc
My laptop doesnt support USB booting, has no optical drives but does have an FDD.If copy the install folder onto a USB drive, boot from a floppy and load USB drivers for the drive, can I then install from there without issue?
My alienware laptop doesn't boot sometimes to the login screen. It doesn't move on from kubuntu screen (the one with the animated dots). This happens only sometimes. When this happens if I press the power button once,the dots start moving and machine shuts down. I also have a nvidia card and don't know if the bug has been sorted where it doesn't show proper resolution during the kubuntu dots screen.
yesterday i installed slim login manager on my computer (eee pc 1018p, ubuntu 11.04), and now it cannot get passed the ubuntu loading screen (with orange dots underneath) when booting. i tried booting into recovery mode and that didn't work either. i also left the computer trying to boot overnight and that didn't work. basically, during this loading screen that should eventually bring you to the login screen, i can alt+tab to see the progress of the load. the progress is stuck on
Is there anything I can do from grub to remove slim?or, is there any way I can access my ubuntu partition and save all my files?
System was fine with :Ubuntu 9.04 (had also installed kde )then....I wanted to try some change to gdm so i downloaded gdm while building it , it asked "PAM" libraries to be installed so i installed PAM ... but ignored the instruction to reinstall SHADOW (library i guess..),Now :on booting system i get login menu but i am not able to login , it says some critical error occured
1) install new copy of UBUNTU and remove old
ps :1) i can log into system through live cd
2) i can use recovery mode boot and log into terminal as root(startx is not working from this terminal..
Ubuntu 10.10 doesn't boot at all. The liveCD only boots once every like 30 attempts, installing from liveCD froze, but the Alternate CD worked and installed ubuntu. Now when I try to boot into it using GRUB, it freezes at the beginning of the boot process.With normal boot it freezes at line: Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox.With recovery mode it freezes even before showing me anything
A little kinda like the liveCD, if I try like 30 times, it might manage to boot once in normal mode.That line keeps on repeating, the the xxx.xxx integer changes each time, and this goes on forever.I tried removing my floppy drive, but it didn't help.I tried to boot with fd0=noprobeThe one time it booted, when I restarted, it froze while trying to restart.
I have no idea what happened to my OS(ubuntu10.04).it doesn't give me any option to enter my login name & passwd.i just get a blank(default) login screen.last time when it worked,i was trying to install GTK+2.8,but due to my mistake i deleted glib using cmd (sudo apt-get purge glib)and after that i even tried to launch terminal but it failed to launch.also tried to play media files using vlc but it didn't work.so i tried to restart my os and finally got stuck in the problem.i have no idea what to do,please help.Is there any cmd to see what problem occurred or which package is missing.
My computer was working this morning and both hard drives were working fine, then all of a sudden for about two hours I was stuck with this "problem", then after fumbling and moving and stablizing things, then Windows works? See below for details. I've finally reinstalled both hard drives, but the one with the Linux partition doesn't work: it says nothing is discovered on the disk. I can't login at the LUKS login after grub starts, therefore I can't get into Linux, but Windows works?! I used to be able to go directly into Grub when the computer starts, I forgot how to do that but it doesn't matter. If you need details I'd be glad to provide them. I just wondered why Linux doesn't work, but Windows does. I have Linux & Windows on two different separate hard drives
this may seem a little odd, but I used my server to install Ubuntu on to an external hard drive. (long story short, the server won't recognize any internal hard disks with any type of video card installed. The video card works just fine when installed, and it will read both CDs/DVDs and USB drives just fine, it just refuses to even notice hard disks. I'm assuming an IRQ issue, but I've tried changing them with no success.) Having installed Ubuntu 10.04 on my external 250g hard disk, I attempted to boot it from the USB drive, since the system has that option. It tells me "error: out of disk" and goes to the Grub rescue prompt. Having followed multiple threads and advice posts, including on this forum, I was unable to resolve the issue. For s'n'gs, I hooked affore mentioned external hard disk to my laptop and tested it. Boots just fine. Then hooked it back to my server to see if it would boot. Still no dice [Just a side note, no the video card is not currently installed in said server, I was testing it to see if the thing would install and operate alright before I tested it with video card installed. Only ever make one change at a time, that way if something explodes, I know what caused it.] My initial objective was to get an operating system that would boot with the video card installed. Any ideas what might be going wrong here?
Last week I installed Zoneminder so I can have some webcam security and I let it run on Mocord (motion detection record) for 24 hours just to see how it worked and run some tests. After that 24 hours I changed it to Monitor so that it wouldn't record anything and wouldn't fill up my 320 gig drive but even after I did that the webcam LED stayed on. Not sure if this is normal, I guess it is since it is still using the webcam, just not recording. I don't think. 2 nights ago I was using it to watch videos online and it was a little slow but was still good enough.
This morning I unplugged it and brought it downstairs to use it but when I opened the lid the hard drive LED was constant and the mouse was all jumpy. Anything I clicked on took a minute to register and the disk utility that I tried loading 2 days earlier looked like it was still loading. I couldn't click anything because the hard drive was running like crazy. Or processor or whatever that light is. So I held the power button, rebooted and nothing on the menu bar was loaded and the hard drive was going crazy again, still couldn't click on anything.
So I rebooted again and this time it gave me a popup before the desktop loaded: There is a problem with the configuration server. (/usr/lib/libgconf2-4/conf-sanity-check-2 extend with status 256)
So I click Close and it boots to a black background with huge icons and there are obviously no drivers loaded. There's now a new error message: GConf error: Faield to contact configuration server: the most common cause is a missing or misconfigured D-Bus session bus daemon. See [URL] for information. (Details - 1: GetIOR faield: GDBus.Error: org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process /usr/lib/libgconf2-4/gconfd-2 received signal 6)
All further errors shown only on terminal. And then it does nothing, all the menus say KDE. Webcam LED is still on though since Zoneminder runs as a service on Apache. It's a dual core Dell Studio 15 laptop with all the newest updates and I have 3 separate partitions on my install: /, /home, SWAP. My / partition has 2 gigs free according to KDE and my /home partition has 124 gigs free.
I'm having trouble installing Ubuntu 10.10 from my USB SanDisk Cruzer to my ThinkPad x60s. I configured the USB exactly as directed by the Ubuntu website's instructions, and booted the laptop from the USB. Things went well until the installer informed me that the installation was complete and I needed to restart the computer. I clicked on the button to do so, but when the computer restarted it displayed a list of error strings like thus:
end_request: I/O error, dev sbd, sector xxxxxxxx end_request: I/O error, dev sbd, sector xxxxxxx2 end_request: I/O error, dev sbd, sector xxxxxxx3
Restarting the computer again with the USB brought up the regular installation menu. Restarting without it brought up a blank black screen with a blinking cursor. I attempted to execute the entire process again (format and reinstall) with the exact same results. How can I finish the installation and access the operating system?
System: Lenovo/IBM ThinkPad x60s 1 GB RAM Core Duo 1.83 Ghz Ubuntu Version: 10.10 USB Drive: SanDisk Cruzer
I've had Ubuntu running standalone on a separate machine for a little while, and wanted to give dual-booting a try with my HP Pavillion DM4 laptop, which is relatively new and came shipped with Windows 7.
I got Ubuntu 10.10 installed fine, but upon restarting and selecting Windows 7 from the Grub boot menu, I get the Windows 7 splash screen, about a milisecond of some flavor of the "Blue Screen" (I can't read any of it because it goes away after less than a second), and then am informed that I need to repair my Win7 installation.
Used the Win7 repair CD, which does absolutely NOTHING- doesn't find my OS, partitions, or anything. If I select the "Automatically Repair..." option, I am informed that CHKDSK failed because a volume on the system is corrupt.
I know Ubuntu can be installed from a USB thumb drive but I have a unique problem. My CD drive in my laptop doesn't work any longer and I have no way to replace it. I know I can place Ubuntu on the flash drive but the bios in my laptop does not allow booting from USB and not ROM update for the laptop. So my question is, since this laptop does have Win7 on it, I can partition the drive to make room for a dual boot, but how do I get Linux on the new partition with out a CD Drive or bootable usb?
Im looking at getting a laptop and dual botting it with ubuntu and windows and my boss said when he did that on his laptop it caused all kind of problems, but that was 2-3 years ago. Is it still a big buggy doing this or should i be able to dual boot on any laptop i get?
I just added "export PATH=.:'printevn PATH'" to ~/.bashrc, then i can't use any commands, like "vim" or 'ls', it shows 'command not found'.
I cound't figure it out why. Then I logged out and tried to login. Another more serious problem occurred. after I type in login id and pass, it shows login seems to be right, but it doesn't login normally, but immediately bring me back to the login dialog box, and ask me to type log info again. I tried many times, it just constantly brought me back to the login page.
Code: Mounting local filesystems: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. ... Starting system message bus: [FAILED]
[Code].....
You have to define PLUGINS in /etc/sysconfig/sipwitch before running sipwitch Then the system froze there. Press Ctrl+Alt+F2 can enter command line mode.
I have two graphic cards on my laptop, one is Intel and the other is Nvidia. There seems to be something wrong with the Intel card and I changed into the Nvidia card to boot. Then the errors occurred. The driver of the Nvidia card has not been installed. How can I start my network in command line mode? I cannot enter graphic mode now.
Fedora 14 on my laptop has randomly decided that it hates me. The system stops booting after "starting atd", right when its starting X. It "hangs" after the fedora logo, though it will reboot when I try "ctrl-alt-delete". I can see that haldaemon is failing to start, and when I boot the kernel with "selinux=0" it gives me an error message:
error while loading shared libraries: libdbus-glib-1.so.2: cannot open shared object file: No such file or directory. NetworkManager fails with same message. the .so file is in its proper directory, where it has been all along. I've tried booting into runlevels 2 and 3. No luck there either. It'll boot to the login prompt, but as soon as I under my userid the screen flashes. I managed to get the error message it was giving me before the flash: inconsistency detected by ld.so: dl-open.c: 503: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT` failed!
I can boot into single user mode just fine. I've checked dmesg and Xorg logs, but I honestly don't know what I'm looking for (and I imagine that those logs would be useless if I boot into runlevel 1, since the error is at higher runlevels. But I can't get the logs for those because the computer just hangs. SSH and networking are never enabled before the hang.)
I'm at a loss here. I use the machine for both school and work [and I have quite a bit of both to do today] and I've been trying to get it to boot normally for hours now. Anyone have any ideas that I could try?
My gateway laptop shuts down either imediately after booting, or while I'm online, usually within the first 5 minutes. I have a laptop cooler and aima fan at the laptop while using it. Could it be the hard drive? Is there any way of knowing before I buy a new hard drive?
I bought a new laptop having the following specs:Processor: Intel I5RAM: 6GBHD: 500 GBVideo card: nvidia with cuda with 1 GB RAM.My Hard Disc already has 3 partitions: C=448 GBs (where windows 7 is installed=64 bit) D:Recovery (16.5GBs) and E:HP_TOOLS (99MB).I want to have dual boot and install linux also. BUT I dont want to delete the other partitions as well. How do I do that?Am I able to shrink C partition without disturbing windows installation and creat another partition in C drive? What it will be called: Primary or logical partition?
I have just installed Ubuntu 7.04, Wine and Vlc. All my videos and mp3 files can play but with no sound or error massages. I am using Vlc for both videos and sound.
I have tried the following techniques to try and boot from CD on my Acer Aspire 5515 laptop: Change SATA information to Native in BIOS. Set the Boot order for the CD/DVD Drive to start first, along with Main driver starting second.
INFORMATION
My laptop is an Acer Aspire 5515. BIOS Version is V1.0 (latest) from Acer. PhoenixBIOS bios (?).
I have still not been successfully able to boot from CD. No matter if it says to boot from CD/DVD Drive first, it skips on to Main driver and starts Windows. It's not because I didn't burn the .ISO image right, because it worked on my desktop, which is ALSO an Acer, an Acer Aspire T180. What I am trying to do, is install Windows XP Professional, and dual-boot it with my Windows Vista. Only thing is, it WON'T boot from CD.
I tried to dual boot my lenovoT6570 with Fedora14 and win7. But the linux becomes extrememly slow and the firefox window cannot even be clicked. I reinstalled the linux again but the same problem persists. Is it compatible with dual booting? any solution or suggestion?
I am still new to Ubuntu but I am having a problem when booting into Ubuntu 10.10. When I turn on the computer, after a few screens go by I see a boot manager giving me the option of:
1: Earlier Versions of Windows 2: Windows 7 3: Ubuntu
All OSes are working with no trouble. But when I try to boot into Ubuntu, I get another boot screen that states:
1: Ubuntu, Linux 2.6.35-28-generic 2: Ubuntu, Linux 2.6.35-28-generic (recovery mode) 3: Ubuntu, Linux 2.6.35-22-generic 4: Ubuntu, Linux 2.6.35-22-generic (recovery mode) 5: Windows 7 (loader) (on /dev/sda2)
When I choose 1 or 3, quite often it doesn't load up the startup GUI, it loads up some command line crap that I don't understand yet, where I type in reboot until I finally get Ubuntu loaded, this happens several times then finally works to the point I can log in. What could be going on, my install is inside Windows 7, not a full install if that matters. What is the difference between line 1 and 3?
I have at office dual booting Fedora14 + Windows 7 in Laptop Lenovo G550. I am using it regularly for work. Recently it stopped normal shut down. It showed some panic message first time and i have to force shut down.It boots normally. Now it does not give any message during Shut down but it does not shut down properly. Every time i have to force shut down.I am ready to follow instructions from forum members. I want to know that how much serious this panic is. Will it result in corruption of installation?
My friend has a HP Pavilion dv2699ea (dv2500 series - somehow *shrugs*) that has stopped working. It's a Core2Duo laptop with a Nvidia GPU. The unit is no longer under warranty. Problems first started a few days ago with the laptop showing corrupted graphics in Windows and BSOD'ing after a few minutes of use. I tried booting to an Ubuntu LiveCD which worked for a while before succuming and crashing as well. The freezing/graphics corruption/BSODing does seem somewhat heat related (CPU runs at ~95'c under load) however I believe that if it is heat related, then it's already damaged components inside.
Now the system has corrupted graphics on bootup[1], including booting Ubuntu[2], and neither operating systems will boot at all (Windows can sometimes get logged in before showing a black screen and becoming unresponsive. Ubuntu just looks like [3] after X starts). (See comment below for links.)
The fact the problem occurs both under Linux and Windows says to me this is not a driver issue. I have run Memtest which passed fine and none of this seems HDD related as I managed to get ~30GB of data off the system before it finally gave up the ghost.
She has been using it repeatedly without giving it adequate ventilation for years (i.e. on the bed, or on a pillow), so it's my opinion that the system board has probably warped over years of cooling/heating and that's causing this current problem. If that is the case, then I can buy a replacement system board and fit it myself, saving about £200 over the cost of an out-of-warranty HP repair. Of course, I don't want to make her spend £100 on a replacement part for it to be the wrong thing, hence asking for a second opinion here!
Hopefully I've covered all the bases here. I'm a former IT support guy myself, so I've tried all the dumb stuff (driver updates, examining memory dumps from BSODs [one 'unrecoverable hardware error', three relating to the graphics card], etc).
how I might try using Recovery Mode to fix whatever is wrong? When i'm booting, I no longer get the gui login prompt. Instead I get a Terminal-like login prompt. I can login and everything but I'm a noob and don't know what to do. I booted to recovery mode and selected fix broken packages but this didn't fix the problem. is there anything else I can try?
I recently installed fedora 13, everything was going great, now when my computer boots it shows the slash screen and then a blank screen and nothing. its been doing it the past few days, after a few reboots it'll work but i'm unable to figure out what is causing it and today it won't show the graphical login screen at all. after the Fedora slash screen the screen goes black the power button shuts it down as normal. ctrl - alt - F2 works and lets me login text wise but I can't get the graphical login to work. nor can I boot to KDE or gnome.I do have Nvidia drivers installed, normall it'll show the nvidia slash screen before the graphical login prompt comes up and that doesn't happen. I did try init 5 and it says Nvidia drivers are loaded. 3d was working just fine I haven't done anything that I can think of to provoke this.
I already have two other threads open for a dysfunctional system. Thread 1: Boot hangs at logon sound - no video signal - appears drive is still working [URL]..Thread 2: Where are boot log files and how I can see those? [URL]...Basically both of those are for not able to complete the boot (hanging up in the middle of booting) in Karmic. I had Karmic since it came out but suddenly about two weeks ago just stopped booting. Except for the battery and resetting BIOS, I had checked all the hardware - and all appear to be okay. Following a tip from x1a4, I started looking into logs (admittedly not knowing exactly what I am looking for) and I ran into auth.log. Following is the code. The highlighted part is confusing (to me) and I am wondering if this may cause to stop booting (or completing the boot process) since I was using auto logon. I do not know if there is anything else (logs) you may need, please advise and I will provide those.
My HP Pavilion laptop (3GB RAM, 1.8GHz, Intel Core2 Duo, Integrated graphics) has been freezing almost every single time I log in. This used to happen occasionally. Recently I had to clear my whole drive and reinstall Ubuntu (now using maverick) because it stopped working. Now when I log in and it freezes the only thing I can do is a hard reboot. I've probably done this way too many times by now and it can't be good for the computer.
To get around this I do the following: Safe mode works perfectly fine and I use it to disable compiz. Then I log back out and log in to the normal desktop and it works fine. Then I re-enable compiz and everything is fine. So compiz itself seems to not be the problem? Maybe it has something to do with how it is being called right after log in?I could try to live without compiz or just disable it every time I log out but that's a hassle.
