Fedora :: Office Dual Booting 14 + Windows 7 In Laptop Lenovo G550?
Jul 29, 2011
I have at office dual booting Fedora14 + Windows 7 in Laptop Lenovo G550. I am using it regularly for work. Recently it stopped normal shut down. It showed some panic message first time and i have to force shut down.It boots normally. Now it does not give any message during Shut down but it does not shut down properly. Every time i have to force shut down.I am ready to follow instructions from forum members. I want to know that how much serious this panic is. Will it result in corruption of installation?
View 5 Replies
ADVERTISEMENT
Apr 19, 2011
I tried to dual boot my lenovoT6570 with Fedora14 and win7. But the linux becomes extrememly slow and the firefox window cannot even be clicked. I reinstalled the linux again but the same problem persists. Is it compatible with dual booting? any solution or suggestion?
View 1 Replies
View Related
Jan 8, 2009
I have a Lenovo thinkpad T400 with Vista x64 that I want to dual-boot with fedora 10. The T400's original config has 3 primary partions:
1) Vista boot partition (some weird partition that it only uses to boot... this is my first time using Vista so I don't know the details, but I think it has to be there and it has to be a separate partition from the "data" partition)
2) Vista data partition
3) Lenovo Rescue and Recovery partition (a separate bootable partition that is used for recovery, backups, ...)
My first attempt was to shrink the recovery partition and add a new extended partition that has the two standard fedora logical volumes and an extra NTFS to be shared between the OS's (I usually use FAT32 for this one, but NTFS support seems to be pretty solid now).
Everything was fine, but I couldn't boot into the rescue partition. According to this site:
[URL]
You *have* to have a linux boot partition be your primary partition. Other people have told me the same thing and that site has an explanation, but I don't get it =)
So, it seems that I need 5 primaries (3 original vista/lenovo primaries, 1 linux primaray to put the boot stuff into, and 1 extended for everything else) to make this work (which is not possible). Can anyone think of something else I could do (other than getting rid of Vista and the Lenovo stuff and giving them both the finger?) I'm thinking maybe I could make an extended partition and move one or more of the Vista/Lenovo partitions in there, but I'm not sure if they could boot.
View 5 Replies
View Related
Jun 10, 2011
Im looking at getting a laptop and dual botting it with ubuntu and windows and my boss said when he did that on his laptop it caused all kind of problems, but that was 2-3 years ago. Is it still a big buggy doing this or should i be able to dual boot on any laptop i get?
View 4 Replies
View Related
Feb 18, 2010
I have installed Ubuntu 9.10 on my laptop Lenovo T60. The problem is i can't make extended monitor in that way: laptop 1024x768 and Monitor LG L1952HQ 1280x1024. If i make this configuration, screens appear black and i can't go back without restarting. Presently system support only: laptop 1024x768 and LG L1952HQ 800x600. This configuration (laptop 1024x768 and LG L1952HQ 1280x1024) worked well previously with the same ubuntu 9.10 before reinstallation. I guess i should reinstall ore change to other video drivers? The refresh rate is set on 60 Hz.
View 1 Replies
View Related
Jul 2, 2011
i am having some issues with dual booting my SL6.1 and Windows. The situation is that i recently acquired an old hard drive from a non-working computer of mine with Windows already installed (i know the windows is functional, as i tested it on my new PC with SL6.1 currently installed & everything runs fine)
The problem is that after editing the grub.config to include windows, windows will no longer boot after an attempt to install a legit version of McAffee anti-virus software which coincidently was only after the first attempt at running both OS's in a dual-boot fashion. Except past the windows start up screen before the dreaded blue-screen.
Which is weird because SL6.1 OS will still boot & works perfectly fine like always, so it doesn't really make sense.
My current setup is:
Disk 1: Solid-State:
Boot Partition
SL6 LVM1: Root Partition
Disk 2: Hard Drive:
SL6 LVM2: User, Temp & Swap Space Partitions (Different LVM to Root)
Disk 3: Hard Drive:
Windows 7 Professional 64-bit
My guess is its windows MBR. The reason i say this is because the Hard Drive contents of the Windows software still appears intact when accessing the drive from the Linux OS. I don't won't to go through the rigmarole of re-installing both OS's. So hopefully their is a relatively simple solution.
View 9 Replies
View Related
Jun 26, 2009
I run an Intel DP35DP motherboard with 3.0 gig Intel processor with 4 gig of ram. Two 500 gig Sata hard drives. The first hard drive is for Windows XP. The second hard drive is four 6 different flavors of Linux and Data backups. Drive 2 the first 120 gigs is split into six 20 gig partitions with a 2 gig swap file. The second 370 gig is for file backups and Norton Ghost 2009 images.
Install Fedora 11 on the second hard drive and use the automatic partitioning tool but don't put grub on your Master MBR put it on the root partition on your second drive. When you get to the Boot Loader Configuration screen make sure you check the Configure advanced boot loader options. The next screen will give the option where to put Grub Boot Loader. It should say like sda or sdb. Sda is usually your XP Drive. From their finish loading. Put Grub on Sdb?.
Now duel booting using XP boot manager.
Go to [url] and download Bootpa26.zip (It's freeware) Unzip the file and it will make a directory called Bootpart. From the Windows command line change directories to C:ootpartootpa26. Run the command bootpart. This is what you should see.
If youll notice I highlighted in red. That is you�re first Linux root partition 1: D:* Type=83
Run the command Bootpart 1 fedora11.lnx Fedora 11 Leonidas
This will add a boot line to your Boot.INI file.
My file looks like this:
View 1 Replies
View Related
Sep 1, 2009
I tried to dual boot Windows 7 and Fedora 11 following the instructions in the link at the bottom of this post. Now fedora boots great, but when it tries to boot 7 i get the message "Disk Read Error Hit Ctrl+Alt+Del To Restart" is there anyway to fix this with out reformatting?[URL]..
View 6 Replies
View Related
Jan 21, 2011
I'm having trouble dual booting Windows 7 Ultimate and Fedora 14. I am using Grub 0.97 (The grub before Grub 2). I installed Windows 7 after installing Fedora 14 so the damn Windows BL covered up Grub. But I can't get into either Windows or Fedora. I get an Error 17: Cannot Mount Selected Partition. And the system can't find the BL for Windows so it always tells me to restart. And I have both OS' on the same hard disk.
View 14 Replies
View Related
Apr 11, 2010
I had a fresh copy of Windows Vista installed (original from the factory)- and I followed a document of dual booting - however I think I did some mistake or automatic skip of install Grub boot loader-
Now my fedora 11 is running smoothly but windows vista is gone or does not boot - I don't have any boot disks- they give examples having floppy disk a boot disk- my laptop doesn't have floppy drive- I guess I could manage in cd or flash drive.
I see my computer's config in fedora desktop as
computer:///250%20GB%20ATA%20WDC%20WD2500BEVS-6.drive
computer:///250%20GB%20ATA%20WDC%20WD2500BEVS-6-1.drive
computer:///PIONEER%20DVDRW%20%20DR-KD08HB.drive
computer:///root.link
I noticed that the partition NTFS still exists and it has not been erased. I did install linux on hda5 since hda1 was partitioned with NTFS
Is there any manual and precaution to be taken while doing the same dual boot system ?
Or is it possible to have dual boot with the present config- although i am ready to install fresh window vista and fedora as my dual booting systems...
View 7 Replies
View Related
Jan 31, 2010
I have just installed Fedora 12 on a 10GB partition separate from the pre-existing Windows XP partition. My problem is that when I turn on my aspire one ao751h it doesn't give me the option to boot Windows XP even though when I mount the partition with XP on it the files are all still there. I think it has something to do with GRUB which I have never dealt with before or the way I set up the partitions when installing Fedora 12. How would I change the start-up screen to allow me to boot from my XP partition as well?
View 2 Replies
View Related
Feb 1, 2011
I've had Ubuntu running standalone on a separate machine for a little while, and wanted to give dual-booting a try with my HP Pavillion DM4 laptop, which is relatively new and came shipped with Windows 7.
I got Ubuntu 10.10 installed fine, but upon restarting and selecting Windows 7 from the Grub boot menu, I get the Windows 7 splash screen, about a milisecond of some flavor of the "Blue Screen" (I can't read any of it because it goes away after less than a second), and then am informed that I need to repair my Win7 installation.
Used the Win7 repair CD, which does absolutely NOTHING- doesn't find my OS, partitions, or anything. If I select the "Automatically Repair..." option, I am informed that CHKDSK failed because a volume on the system is corrupt.
View 7 Replies
View Related
Sep 27, 2010
I bought a new laptop having the following specs:Processor: Intel I5RAM: 6GBHD: 500 GBVideo card: nvidia with cuda with 1 GB RAM.My Hard Disc already has 3 partitions: C=448 GBs (where windows 7 is installed=64 bit) D:Recovery (16.5GBs) and E:HP_TOOLS (99MB).I want to have dual boot and install linux also. BUT I dont want to delete the other partitions as well. How do I do that?Am I able to shrink C partition without disturbing windows installation and creat another partition in C drive? What it will be called: Primary or logical partition?
View 3 Replies
View Related
Oct 10, 2009
I loaded Fedora 10 onto my Lenovo T60 last week. everyday i boot it up and it works fine for a few minutes, then freezes. to the point of powering off. my mouse still works but nothing else. i power back up and it generally stays up after that.
Before i had Fedora i was useing PCLinux 2009 and it worked just fine. i get a kernel error alert every once in a while. i finally submitted it to Fedora to be reported. also a flash plugin says it is needed at times but most media plays.
Is there something i'm missing here? like i need to add an additional update? i already updated/installed most Fedora 10 updates.
View 6 Replies
View Related
Dec 7, 2010
recently installed fedora 14 on my lenovo ideapad y530.
Linux bardot 2.6.35.9-64.fc14.x86_64 #1 SMP Fri Dec 3 12:19:41 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
here is my audio device:
lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
it has surround speakers and even a subwoofer. unfortunately only the two side speakers work. how to make ALL my speaker system work?
View 1 Replies
View Related
Jul 10, 2009
I just put Fedora 11 on my Lenovo Thinkpad t400. I selected the integrated (lousy, but Intel (supported)) graphics device in the BIOS, but I really hate the lower performance than the discrete graphics device. However, this device requires fglrx or radeonhd for DRI. RPMFusion has not released an (a)kmod-fglrx, so I can't use that. I have heard radeonhd has some stability issues though, and I don't know how to install. I was wondering how I could completely change my graphics configuration (change chipsets in the BIOS) and get the X Server in Fedora 11 working with the new driver and chipset. Is it a good idea to use radeonhd, or should I wait for the fglrx?
Even then, how would I completely change my graphics configuration so it would work with a different card & driver? I don't want to do a fresh install because I've done a lot of work & customization with the F11.I don't know anything about radeonhd, so any information about this kind of thing would be useful.Finally, should I just suck it up and deal with the Intel graphics? Is anything of this sort really worth my time? (I'm willing to spend quite a bit, trust me!)
View 3 Replies
View Related
Apr 1, 2011
I've read that, when configuring a dual-boot system, you should install Windows first to avoid any issues.Some questions: I'm assuming this has to do with the boot loader so: How is Windows boot loader so different that this matters? If I'm totally off, please explain.Is this the same case with Windows 7 and Windows XP? Depending on question 1 of course: Will installing Windows later on mean that it will definitely not work or just that you might encounter issues later on? Some tutorials are kind of ambiguous about that point.
View 3 Replies
View Related
Nov 18, 2009
i have recently started my masters degree program and i have to install fedora 11 for one of my courses. The problem is when i try to install fedora 11 on my laptop, it wipes out my windows vista installation. I want to keep vista. I have a sony vaio laptop model VGN-FW340D. 4GB RAM and 400 GB HD. i first shrink my hard drive to free up around 100 GB. Then i run fedora 11 DVD and let it make the partitions on my free space.. I have tried everything.. I chose use free space the first time, but i didnt work, it wiped out my vista, next time i chose custom layout and defined boot, root and swap partitions , but again it wiped out my vista.. I have read many guides to dual boot vista and fedora and have carried them out step by step, but nothing works.... Also i dont have vista installation DVD, i just have the recovery CDs, so everytime it wipes out my vista, i have to do system recovery, ive been trying for a week now, and its driving me crazy, i asked a friend of mine to help me out, he has dual boot system, and he tried it and it did the same thing, wiped out my vista... i just have one drive C: with two partitions, one small partitions which contains recovery files, and the rest of the partition has vista.......
View 7 Replies
View Related
Jan 23, 2011
I've just got a Toshiba NB 250 netbook pre-loaded with Windows 7.
I'm hoping to dual boot this (Windows 7) with Ubuntu. There are three partitions (sda1, sda2, and sda3) already created on the disk. I'm thinking of reformatting the sda3 drive to EXT4 and loading Ubuntu onto this drive. I'm not sure what's on sda1, but sda2 appears to have the windows 7 on it (though I'm not sure about that).
View 9 Replies
View Related
May 2, 2010
I found this tutorial about dual booting Suse 11.0 & XP. Is it suitable also for Suse 11.1 & win7, or should I find another tutorial? Can you recommend a good tutorial for dual-booting Suse 11.1 & Win7 ? I've searched a lot but didn't find any.
View 2 Replies
View Related
Apr 24, 2010
I'm using the latest version of EasyBCD (as of now) to dual boot Ubuntu with Windows 7. I added an entry "Ubuntu 10.04" to the boot menu, selecting Grub as the type.However when I choose Ubuntu upon startup I get this.Upon hitting any key I get this.Wanted to mess around with Grub and mbr, but I'm afraid I'll screw my hard drives up
View 4 Replies
View Related
Nov 21, 2010
Well to get started i need help understanding why grub locks up during boot. I installed Mint 2 weeks ago and this has been happening since day one. For some reason when trying to either boot from my distro or os the keys lock not letting me chose any of the options. what ever option is selected during the boot that would be the selection i will be entering into. This happen randomly not always sometime i would have to boot 4 or 5 times before grub let's me chose any of the option's. Here is where my Window's and Linux partition stand.
[Code]...
Maybe i did something wrong during installation if so is there a way to correct this problem that is occurring with out me having to do any fresh in stall's on both part's.
View 5 Replies
View Related
Jun 23, 2011
The problem is that I need to use windows as well every now and then for gaming. So I have an internal hard drive dedicated to windows out of my laptop and one inside for kubuntu. Changing hard drives out every time I game is a bit of a bother and wondered if anybody has booted into windows without fiddling about with the hard drives. Can windows be booted from outside the laptop? (e.g. by using a sata to USB converter frame)?
View 9 Replies
View Related
Jul 22, 2011
setting windows as the default OS when dual booting ubuntu. Have gone into system settings on both windows and ubuntus and chosen the option to boot windows vista first, but it has not worked.
ps. am using windows vista and ubuntu 10.10
View 8 Replies
View Related
Feb 28, 2011
My PC is an older model Toshiba Satellite that I've upgraded a bit to handle Windows 7 Ultimate x64.
Recently, I joined a CST program at a local college, and there is an entire mod on Linux. I'm at the top of my class, and I aim to stay that way, so I found out what distro they were using, and downloaded openSUSE 11.3. I tried to install it once, and I failed, though I didn't screw up my Windows...much.
I've created an entire 132GB partition, and a 3 or 4GB swap, but I keep getting an error about the boot loader not being on a partition entirely below 128GB. So, I set the partition for 127.98GB, and still with the error.
I'm no slacker when it comes to working with Windows, but when it comes to Linux, of any type, I'm horrible. I need to be able to install the fully functional openSUSE OS alongside my Windows 7 Ultimate, without completely screwing my Windows install up. I can recover, so I'm not afraid to try new things.
View 5 Replies
View Related
Jul 27, 2011
What happens if I write over Pardus2011 with another OS such as Fadora or Suse? Does the boot loader stay? I really can't risk losing everything on my windows partition. If I can, when installing do I ignore installing a new boot loader? It usually asks...
View 4 Replies
View Related
Sep 26, 2010
I have a windows 98 box.I have a slax ISO and a slax TAR. My slax TAR has all the modules I want.
My windows 98 hard drive has only 1 partition and is fully formatted.I have used windows 98 to download my TAR.I want to dual boot slax and windows 98.How do I go about this? So do I have to repartition?
View 7 Replies
View Related
Mar 2, 2011
I'm considering trying out Slackware just because I want to try something new. I've used Ubuntu for a couple of years and Debian for nearly a year so I do have some Linux experience. I do have some questions before I begin though. I've read that all configuration is done through text files. Does this include things like changing resolution and keybindings?
- I've also read that Slackware lacks a package manager. So does this mean that I'll have to download what I want from the internet and keep it up to date myself? Is there no repository? How are packages installed in Slackware? Is it a fairly simple process?
- Is installing multimedia codecs and Microsoft's True Type Core Fonts a fairly simple procedure? What about dependencies? I've heard that it has no dependency checking. So would I have to look up a list of dependencies for every package that I wish to install?
- How is LILO? Does it work well dual booting with Windows? In Ubuntu and Debian as soon as I install the OS, I can immediately access the internet from my wired router. Would I have to jump through any hoops in Slackware or can I expect similar results?
View 14 Replies
View Related
Sep 8, 2010
I am currently running windows 7, i would like to be able to dual-boot with openSuse 11.3 64-bit, at the moment I have two seperate partitions each 111gb in size and i wish to install suse onto the D: partition without effecting my windows installation or any data on the c drive.
When i got to the "Discs" stage of the installation i was very confused by this as i am completely new to Linux and dual-booting, i thought it would be a simple case of selecting my d: drive and installing straight to that but i cannot work out how to do this.
View 7 Replies
View Related
Jan 22, 2010
I have a question about dual booting windows 7 and ubuntu 9.10. What I want to be able to do is store my multimeda and open office files on a partition that can be read by both windows and ubuntu, I just don't know how to do this. What kind of partition should I make it? Should it be done in windows 7 or ubuntu?
View 2 Replies
View Related
