General :: Error - An Application Is Preventing The Volume "New Volume" From Being Unmounted
Feb 26, 2011
HP 210 Mini
Fedora 14 xfce
2.6.35.11-83.fc14.x86_64
I have inserted my handy drive. However, when I right click and select unmount I get the following message:
An application is preventing the volume "New Volume" from being unmounted
So I try from the command line:
umount /dev/sdb1
And I get the following message:
umount: /media/New Volume: device is busy.
All I have done is copied some files to my handy drive. So I am not sure what process is keeping my handy drive busy.Is there any command that I can use to see what process of anything else is using the handy drive?
View 1 Replies
ADVERTISEMENT
Jul 20, 2010
I have two volumes, both with 800GB total used on them. lets call them /vol1 and /vol2. /vol2 is just a cron'd rsync'd copy of a folder on /vol1 which is a live share for many users.If I temporarily suspend the cronjob doing the rsync's from /vol1 to /vol2, is it safe to unmount and e2fsck /vol2, then remount it somehow?
Both /vol1 and /vol2 say the filesystem state is not clean when i do a tune2fs -l on them both. According to tune2fs both will check themselves upon restart, but if I can do /vol2 since it isn't the live data beforehand, that will cut my downtime in half the next time i restart the server.But I also wonder that if I can do this, then i remount /vol2, will the "not clean"-ness of /vol1 just be rsync'd back over to /vol2 the next time the rsync runs?
View 11 Replies
View Related
Dec 1, 2010
I'm rearranging a bunch of disks on my server at home and I find myself in the position of wanting to move a bunch of LVM logical volumes to another volume group. Is there a simple way to do this? I saw mention of a cplv command but this seems to be either old or not something that was ever available for linux.
View 2 Replies
View Related
Jun 13, 2010
I'm running squeeze (last updated today), and everything has been working great. There is only thing that would simplify my life minutely..Anybody know how can I have the volume buttons on my laptop change the "pcm" channel volume rather than "master"? If they could control pcm, then I could adjust the volume coming out of my headphones or my computer speaker (both controlled by pcm, but not master...seems strange to me) with just one click.I tried to find this info online, but all results seem to refer to an older version. The simple "click here, set this" solution no longer is possible.
View 2 Replies
View Related
Feb 27, 2011
Debian Squeeze 6.0.0 on a Thinkpad T43, sound volume is not synchronized between the laptop volume buttons and GNOME's Volume Applet. So if I turn the volume all the way down with the physical buttons, the volume applet may still indicate 75%.I did not have this problem in Debian Lenny. Pressing the volume buttons used to show a volume bar on the screen, as did pressing the mute button.
View 8 Replies
View Related
Jul 17, 2010
Is there a way to default volume to 100% in the terminal with gnome-volume-control-applet or any other program? I am setting up a dedicated Zsnes machine which boots into Fluxbox but the volume is muted by default. There isn't a man page for gnome-volume-control-applet.
When I log into Gnome the volume is set to 100%, but Fluxbox is always set to mute.
View 1 Replies
View Related
Oct 29, 2010
I've got my xubuntu 10.10 install just about perfect on a little acer aspire d250, apart from a small sound useability issue: In the interests of simplicity and resource usage I removed pulseaudio. After a bit of fiddling I got it so that my USB soundcard (ProDac) is recognized and automatically set as the default soundcard when plugged in. Any sound applications automatically use the USB sound if it present, no need to around with pulse. The only problem is that my netbook's volume control keys still only control the master volume of the inbuilt soundcard, and have no effect on the usb sound. Does anyone know of a way to change which sound device these keys actually effect? I'd like to write a little script so that when the usb device is detected the keys are remapped.
View 1 Replies
View Related
Mar 7, 2011
I'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
View 1 Replies
View Related
Mar 24, 2011
I used Ubuntu 10.10 (64 bit) on IMac i7. As far as, I remember, after installing Pulse-Audio Equalizer, for each restart of the system, after login screen, system sets volume to maximum value. What can I do?
View 1 Replies
View Related
Jun 12, 2010
since using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
[Code]...
View 6 Replies
View Related
Jan 22, 2011
I don't know much about lvm and I've managed to screw up a drive. I had a 500GB drive with FC14 on it and I wanted to copy over a load of data to my new 1TB that was replacing it. I set up my new install the same way as the old...including the same volume names (error number 1 I think) I successfully mounted the old/500GB drive (using vgscan and vgchange -a y etc.) using a laptop (running FC13) and an external hdd cradle. I could access the files I wanted but this wasn't the machine I wanted to copy them to (I was doing this while waiting for the install to finish on the new drive).
When I tried the same process on the new install I found that having two lvm with the same name meant I couldn't mount the external one. So I opened the disk utility (palimsest) and was going to change the name of the old volume group but it wouldn't let me do that. I then thought maybe I could get away with just changing the name of the partition where the files were and maybe I could add it to the mounted group or something so I changed it to lv_home2. This changed the name of my new/1TB lv_home to lv_home2 as well. So thinking that wasn't the answer I just changed the name of the new lv_home2 back to lv_home.
From that point on I haven't been able to see the old drives partitions (the new volume group still works so far). I has a physical volume but the volume group and volume names are gone from view. When I try to vgscan on my main computer or the laptop I had it working on earlier I get:
[Code]....
View 3 Replies
View Related
Sep 9, 2010
I'm using 10.04 now and it runs ok, except one strange thing in the Volume control applet. Sometimes, when I click on the volume slider, it moves up. Even if I try to slide it down, it moves up on every click. The same when I click left of it - it keeps moving up! This is very annoying at night when the music gets loud and wakes everybody. It happens with or without Compiz turned on
View 3 Replies
View Related
Oct 31, 2010
I am struggling with a problem with the volume control... when i try to adjust the volume with the sliding bar i can not do it. If i put the scrollbar to the 0 position, it is muted. when i move it to anywhere else, i get the full volume. From other programs like vlc, i can adjust the volume with no problem.
View 2 Replies
View Related
Apr 10, 2011
My volume control seems to have only three settings: TOO LOUD, VERY QUIET, OFF. If I adjust the Master volume slider from the Panel, only about the right 1/8th has any effect and if I slide it past about the 95% mark, I get no sound at all. At the far-right end of the volume control, I get total volume. It's basically like the slider only has any impact in the top 5% of it's space. Below 95% of the slide, there is zero volume.
It's so drastic, that one tap down of the volume button on my keyboard kills the sound (because it nudges the slider past that 95% mark). This happens in the Audio settings, etc., system-wide. If I adjust the volume for an individual app from within the app (MPlayer, for example) it behaves exactly as expected (that is, app volume works smoothly, it's just master volume that has this issue). I have run through most of the "obvious" things-- I'm wondering if I broke something by installing the extra KDE packages to get Amarok to work.
View 3 Replies
View Related
Mar 17, 2010
In Intrepid Ibex, I was using the left Super key as Volume Down and the right Super key as Volume Up, because it was just so convenient.
However when I go to the "Keyboard Shortcuts" window in Karmic, it doesn't let me assign the Super keys to anything. I mean like, I can use the Super Keys along with other keys, but not by themselves.
Is it somehow possible to use the Super keys for Volume Up and Volume Down in Karmic?
View 3 Replies
View Related
May 1, 2010
It seems that when I adjust the volume with the volume wheel on the side of my notebook, the OS messes up. Nothing is clickable, I cannot type anything, in order to get a working computer again I have to hard reset it.Why is this happening? I have never experienced this. I have a Toshiba Satellite that I recently installed Ubuntu on.
View 5 Replies
View Related
May 7, 2011
I have a system with a 2TB RAID level 1 installed (2 x 2TB drives, configured as RAID1 through the BIOS). I installed Centos 5.5 and it runs fine. I now added another 2x2TB drives and configured them as RAID1 through the BIOS.
How do I add this new RAID volume to the existing logical volume?
View 5 Replies
View Related
Aug 13, 2010
I'm running f13 on eeeeeeepc netbook .... gnome and compiz The <FN> keys that control volume are not working, but brightness, for example, works fine. The keyboard settings in gnome do not seem to allow me to set the volume to the <fn> key combos.
View 2 Replies
View Related
Apr 26, 2011
Just wondering if anyone else experienced this. I have been using Ubuntu for half a year now and I love it. I just installed Kubuntu Desktop to try it out and I found that I can't get near as high volume with it than I do with Ubuntu. Ubuntu is even way louder than the Windows that used to be on here.
So why is there a change in the max of volume? I am a huge music person and that is the only thing holding me back from getting rid of gnome. I like how fresh and clean KDE is.
Code:
View 2 Replies
View Related
Sep 4, 2010
Is there any way, native or within download, of changing audio volume on a per-application basis? I vaguely remember doing this in the vista basic that was installed on this when I got it a couple of years ago, but was removed after a couple of months due to instability. I'd like music streaming thru VLC louder relative to games being played thru Adobe Flash in Chrome (which are at 100% of possible, 100% of the time, no options other than mute).
View 5 Replies
View Related
Jul 24, 2011
As per the title, the per application volume mixer has disappeared and I can no longer unmute things i have previously muted.
View 2 Replies
View Related
Apr 25, 2011
I've done an Upgrade from Lenny to Squeeze and I get these warning messages in syslog:
Code:
But gnome-volume-manager is not installed:
Code:
Maybe this is a reason, my Gnome Desktop from time to time is completely freezing.
View 5 Replies
View Related
Jan 15, 2010
I'm using a Toshiba Satellite A135 and it has a scroll volume wheel in the front. However, every time I use it, it makes the volume go up two notches, no matter how gently I move it. Is there a way to reduce how much the volume goes up or down when using the volume wheel?
View 1 Replies
View Related
Jun 20, 2010
Recently I bought a Toshiba NB100 from a family friend. All was going well until I installed some updates and now when I try to unmute my speakers I get this error message pop up.....
"No volume control GStreamer plugins and/or devices found"
View 2 Replies
View Related
Jan 1, 2010
so i have f12 installed on my hd with lvm using the whole extent of the HD , i want to reduce it so i can dual boot it with a windows system, i managed to reduce the logical volume to free some space, but i cant seem to reduce the physical volume, is this possible and how ?
View 2 Replies
View Related
Oct 29, 2009
Volume up, volume down and mute keys on the keyboard don't control the volume any longer.They worked before. Hitting the keys brings up a progress bar widget with the volume level unchangeable, set at 0% (which is not accurate at all).It looks like the key mappings or key bindings are working, but there is a disconnect with actual functionality. The volume cannot be changed or muted anymore from the keyboard.
This worked just fine in KDE on Fedora 11 before upgrading KDE components yesterday with Yumex. I am now using KDE 4.3.2 I don't think that it's a coincidence that it stopped working after doing an update.
I updated the kernel and nVidia drivers too, but this problem exists when I went back and tested with the previous kernel, so I don't suspect the kernel upgrade. No info in Xorg.conf about the keyboard. Is there a setting that I am missing?
Sound works just fine. I can listen to whatever source I like. This is not a problem with the sound drivers as far as I can tell.I just want to be able to control the volume with the keys on my Logitech Illuminated Keyboard, model Y-UY95. Is anyone else experiencing this?I can adjust the volume with Kmix 3.5 or GNOME Volume Control V2.1
View 7 Replies
View Related
Apr 8, 2009
Dual PII 400, 512Mb with a Promise SuperTrak 100 IDE Array Controller. At present I have only one drive on the controller, configured for 1 JBOD array. I install FC9 with no problem. New partition is created and formatted, Grub is installed, and then... Grub is found and booted, but then I get:
Reading all physical volumes. This may take a while... No volume groups found Volume group "VolGroup00" not found Unable to access resume device (/dev/VolGroup00/LogVol01) mount: could not find filesystem '/dev/root' I can boot in rescue mode, chroot to the installed system. I changed the kernel boot parm "root=/dev/VolGroup00/LogVol00"
View 2 Replies
View Related
Oct 24, 2010
I have 2 hard drives on mu box 1st one is 500.0 MB ext4 Volume where I have my syste FC 13 and a 2nd one where I put my database files as follows 78.1 GB ext4 Volume usage = filesystem, format ext4
ih file browser, I can see an icon for a 80GB hard drive but whenever I double click I get the following
Quote:
Error mounting volume: An error occured while performing an operation on data Partition 1 of ATA Maxtor <: <the operation failed
clicking details
Quote:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
missing codepage or helper program, or other error
when I type
Quote:
dmesg | tail
I get
Quote:
# dmesg | tail
[drm] nouveau 0000:01:00.0: Allocating FIFO number 3
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 3
[drm] nouveau 0000:01:00.0: Allocating FIFO number 4
What is very strange is that mysql works fine.In disk utility, it indicates that disk is healthy, but when I click check file system i get
File system check on "data" (Partition 1 of ATA MAXTOR STM380215A) completed File system is NOT clean
View 14 Replies
View Related
Feb 9, 2010
I try tou Mount NTFS partition, and i i have this error massage:
"Cannot mount volume. Invalid Mount option when attempting to mount the volume"
View 8 Replies
View Related
Jun 7, 2010
I keep getting this error message. i don't want to go back to windows but if I can't fix this I'm afraid I will have to so I can listen to my podcasts. Does anyone know how to fix this error?
View 9 Replies
View Related
