I am having issues with Fedora 11 and audio. I have pulse audio running and configured. The volume control on the top panel (GDE) works properly, but i do not hear any volume until I move it up past 50%. I tested it with the advanced volume controls opened and it even shows the master volume not moving until the volume slider on the panel reaches at least 50%. Can anybody help with fixing this. It is very annoying. Thanks in advance for the support.
it's a while now that the volume control in gnome stopped working. I tried to reinstall gnome-media, but without success. The icon is present in the top bar and I can see the volume slider, but it simply doesn't change the volume.I'm using F15 on x86_64.
Volume up, volume down and mute keys on the keyboard don't control the volume any longer.They worked before. Hitting the keys brings up a progress bar widget with the volume level unchangeable, set at 0% (which is not accurate at all).It looks like the key mappings or key bindings are working, but there is a disconnect with actual functionality. The volume cannot be changed or muted anymore from the keyboard.
This worked just fine in KDE on Fedora 11 before upgrading KDE components yesterday with Yumex. I am now using KDE 4.3.2 I don't think that it's a coincidence that it stopped working after doing an update. I updated the kernel and nVidia drivers too, but this problem exists when I went back and tested with the previous kernel, so I don't suspect the kernel upgrade. No info in Xorg.conf about the keyboard. Is there a setting that I am missing?
Sound works just fine. I can listen to whatever source I like. This is not a problem with the sound drivers as far as I can tell.I just want to be able to control the volume with the keys on my Logitech Illuminated Keyboard, model Y-UY95. Is anyone else experiencing this?I can adjust the volume with Kmix 3.5 or GNOME Volume Control V2.1
I just installed F11 on my new laptop (Acer Timeline 3810T) and I have the following issue when adjusting volume. The keyboard shortcuts work, but they don't raise/lower the volume smoothly, instead they do it in 4 or 5 increments total. What's weird is that the notification that appears in the screen when I adjust the volume (the whitish square with a picture of a speaker, I think it's part of Compiz) shows the the volume changing in small increments, but when I get to the 3rd or 4th little increment from the right the volume is already muted. If I look at the alsa volume controls at the same time, I see it changing by the 4 or 5 big increments.
I've had this problem since I fresh installed Fedora on my laptop: I can play sounds fine, but I can't mute/make it louder or softer. I couple days ago (right after I installed) there was a notification saying there was an error with something in the sound and it was "falling back to default". Recently, the notification stopped popping up but the problem persists.
I'm not 100% positive as to what type of speakers my laptop has. I know they're made by JBL, but on Windows they're handled by "RealTek HD Audio Manager" and in Device Manager there's 2 different audio devices: Realtek High Definition Audio and ATI HDMI Audio. Neither of them say they're JBL brand. The most information I can get out of the specs of my laptop found on Newegg is that they're "JBL stereo speakers (1.5 watt x 2)".
After running my computer for a while, my volume control always messes up. I wonder if it is some app. Mute, raise, lower volume all fail, and so does the little volume icon in my notification area. When the computer boots up things are fine. I can do some more testing later to try and pinpoint the source but I need to wait a few hours for a download to finish. I can still use Advanced Volume Control and all the options there work.
I feel little silly asking this, I accidently removed from my gnome panel my internet connection, volume control and battery indicator on F11. how can I add this back. It does not show up in the add to panel menu and the applications do not give you back the default feel.
I have a dual boot and my windows plays audio fine.My ubuntu plays audio fine as well however when I click on the Volume Control icon on the panel it gives me this error:No volume control GStreamer plugins and/or devices found.and I am still unable to control volume. I have alsamixer installed and it can control my system sound fine but all this time I've been able to use the controls on my HP Pavilion dv5250ca laptop's keyboard controls to control the volume and I'd like to be able to continue doing that- I haven't been able to for the last 2 days.
My internal mic on sony vaio was not working on karmic 64bit. After I followed these instructions [URL] (updated alsa to 1.0.22) I got the microphone working, but now mplayer does not play any sound (although it plays files), as it tries to use pulse by default. However when run with -ao alsa, it works fine.
Other than that, the volume control has not effect on the sound, so every time I need to control it using alsamix.
When I remove pulseaudio, everything seems to be working, except gnome-volume-control and gnome-volume-control-applet do not start, and the keyboard volume controls dont work.
Here are the sound cards I have:
Code: progre55@progre55:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC262 Analog [ALC262 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0
Does anybody know if it's possible to get the volume control knob (the one on the device) on the USB Creative Sound Blaster X-Fi device in Ubuntu 10.4? The sound is working great for me, but I actually bought it mostly for the volume so I'm hoping there's a way to fix it before I return it.
I'm not able to hear any sounds from my system. The panel does not have the volume control button anymore. I'm not able to run System -> Preferences -> Sound. I get an error saying "Waiting for sound system to respond" And if I run 'pavucontrol' in the terminal, I get "Connection failed: Connection refused"
Also recently I've noticed that when I run some commands in the terminal I often get this message "Home directory /root not ours." Can this be related to the sound problem? I am on the system as root.
When I started using Slackware I've been using USB headset. Everything ran perfectly fine. They got recognized, I could use all of it's functions and so on. Unfortunately volume control on them stopped working so I had to service them, and like in every third world country, yay I need to wait minimum three weeks just so they can press a button and say "Yup, they don't work".
I bought normal headset to use them while other one is getting fixed, and didn't expect any problems with them considering they are "old" technology, normal audio input and output.
Now problem is following, sound works fine but microphone doesn't. Once I managed to "fix" it by switching audio input from mic to something else and then back to mic, now even that doesn't work. Another... "problem" is if I leave my USB webcam plugged in while booting computer, there is no sound at all, ether on line ones or USB ones but I can easily solve that problem by unplugging webcam, rebooting and plugging it back in later.
Now everything ran fine until my computer shutdown while I was sleeping. Don't know why, but it started happening recently, don't see anything smart in logs so I assume its... something, read it could be cache, HDD, temperature and so on but since logs don't write down anything smart... will deal with it some other time.
When I talk I can actually hear myself on the headset, which probably means that they work. If I put mic boost all the way up, I can hear myself perfectly clear, but somehow... seems that that information just doesn't get to Slackware, well it gets somewhat considering that it reacts to me adjusting mic boost on KMix, but everything else... no.
Arecord doesn't record anything, TS register as microphone isn't plugged in at all, skype doesn't get any input ether.
Randomly my volume control in the system tray are gone and my laptop volume control wheel doesnt work even when toogling it like usually a bar shows the volume percent but now nothing happens.
Is there a way to default volume to 100% in the terminal with gnome-volume-control-applet or any other program? I am setting up a dedicated Zsnes machine which boots into Fluxbox but the volume is muted by default. There isn't a man page for gnome-volume-control-applet.
When I log into Gnome the volume is set to 100%, but Fluxbox is always set to mute.
I'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
since using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
I'm using 10.04 now and it runs ok, except one strange thing in the Volume control applet. Sometimes, when I click on the volume slider, it moves up. Even if I try to slide it down, it moves up on every click. The same when I click left of it - it keeps moving up! This is very annoying at night when the music gets loud and wakes everybody. It happens with or without Compiz turned on
I am struggling with a problem with the volume control... when i try to adjust the volume with the sliding bar i can not do it. If i put the scrollbar to the 0 position, it is muted. when i move it to anywhere else, i get the full volume. From other programs like vlc, i can adjust the volume with no problem.
My volume control seems to have only three settings: TOO LOUD, VERY QUIET, OFF. If I adjust the Master volume slider from the Panel, only about the right 1/8th has any effect and if I slide it past about the 95% mark, I get no sound at all. At the far-right end of the volume control, I get total volume. It's basically like the slider only has any impact in the top 5% of it's space. Below 95% of the slide, there is zero volume.
It's so drastic, that one tap down of the volume button on my keyboard kills the sound (because it nudges the slider past that 95% mark). This happens in the Audio settings, etc., system-wide. If I adjust the volume for an individual app from within the app (MPlayer, for example) it behaves exactly as expected (that is, app volume works smoothly, it's just master volume that has this issue). I have run through most of the "obvious" things-- I'm wondering if I broke something by installing the extra KDE packages to get Amarok to work.
i try to install mac4lin, then i found it not nice, then i decided to uninstall it. everything is back to original fedora 12 theme, except this volume controller image. is there any way to change it back to original fedora 12 volume controller image?
I use F13. How can I control the volume of my desktop ssh'ing into it from my laptop?
I use the laptop like a remote control to control my desktop through vnc while watching movies, but changing volume through this setup is a bit too cumbersome and clumsy. I tried alsamixer but it behaves strangely and doesn't change volume.
Laptop is Dell Latitude C600/C500 with Pentium III 850Mhz, 256Kb L2 Cache, 256MB RAM, ATI M3 video card, HD 20005 MB and sound card is EES Maestro 3i. After trying to do something with Windows 2000 which was installed on the machine, I decided to put Linux without keeping windows on the machine. First I try with Xubuntu (latest version) which was working but slowly, then I found that Debian could work fine on that machine. I have installed latest version 5.08 and was surprised how goodly old machine can work. I solved problems with screen resolution (change from 800x600 to 1024x768) but I couldn't find solution how to fix problem with sound.
Actually I don't have sound on the machine. I looked for a linux driver for that sound card and Dell is only providing windows drivers. Then I found that I can solve the problem with ALSA drivers but I couldn't find the easy way (or any way at all) to install drivers and to get back the sound. When I click on 'Volume Control' (top right corner of the screen) I get the message: 'Volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured.'
Because of a horrible problem (volume bursting, this is known bug), I completely removed Pulseaudio and some related packages. So I'm now using pure ALSA, and it's working fine. Yet, the volume control tray icon was disappeared. How can I recover it?
installed F12 and noticed that the volume control applet is now all Pulseaudio rubbish, not Alsa like gmixer used to be. So now I don't seem to be able to mute my speakers when I'm using my headset, which in F10 I could do by just muting LFE/Center.Note I don't want the speakers to be disabled when I have the headphones plugged in (like Jack does) I just want to be able to control volume of the mixer channels individually - as sometimes I'll be playing music through the speakers and will receive a Skype call and want to mute the music, but also don't want the Skype sound coming out of the speakers - just the headphones.
I've tried setting up 4.1+input, 5.1+input, 4.0+input etc; but for some reason, even though the PulseAudio mixer thing has 5 individual sliders, they do nothing as they "jump" back to 100% when you slide them - even with the channels unlocked. gmixer and alsamixer do the job, but pulseaudio is the applet and only seems to control the master volume, not the individual channels. Any ideas - or perhaps a way to make gnome-volume-control revert back to actually being gmixer?
I don't know how this happened, but my keyboard copy and paste functions have stopped working. Oddly enough, I discovered that I can only copy and paste by using the third mouse button. Pressing down on the scroll wheel after highlighting text copies the text, pressing it again pastes it Ican still use the Edit-copy and Edit-paste menu functions.
I'm sure it has something to do with all the tinkering I have been doing with my desktop. I have been experimenting with CompizConfig and Cairo dock, changing my themes and things of this nature.
When I delete things from my home directory, or from my desktop,my trash can on the desktop stays empty, and the Empty Trash in the right-click menu stays disabled.The files disappear from view, but the disk space remains labeled as used.The only way I can empty my trash is through the trash on the panel. Weird
I was just trying to install some packages at the gpk-application 2.27.2, but they are not compatible. For some reason I can't install anyting. I have Fedora Leonidas. In another forum they told me that my package installer is not the proper for this version
I'm running fedora 12 64-bit with XFCE desktop. Updated to firefox 3.5.9 yesterday and that hasn't solved my issue... Just recently it is SO slow. I would even say its on ie standards I sometimes sit with pages "loading" only to find that the url soon changes to "search history and bookmarks" and the bottom left corner message says "stopped" - its most unreliable. at first i thought it was my sometimes dodgy internet connection but i have done several speed tests and after waiting ages for the page to load, the speed test comes up with about 2Mbps. This speed is not translated to the speed firefox is loading pages - several times i've had to stop all tabs loading and then reload them just because firefox seems to have forgotten its meant to be looking on the internet and "thinks" putting a message "loading" in the tab will do
I've installed 13.1 and the new GSB. I like it a lot (better than old versions), but the volume applet doesn't work.I did some reading and apparently this is due to a conflict between the GNOME people and the Pulse Audio people. So I was wondering if it was at all possible to use the xfce volume applet.
Newbie slackware user here, I'm having some issues getting keyboard volume control to work properly.I recently fixed my network adapter problem and I managed to get flash player installed despite my minimal knowledge of linux and slackware, but there's yet another small glitch that I can't fix.When I'm logged in as root, keyboard volume controls work perfectly, mute mutes the audio + increases the percentage, - decreases the percentage, etc.However, when I'm logged in as another user and I try to use keyboard volume controls, the bar will pop up in the middle of the screen, but it will be stuck at 0% no matter that I do. (Sound still plays though, it seems that volume is at 100% while the bar in the middle reads 0%).
