Debian Configuration :: Testing Version In VMware Vs Normal System
May 25, 2010
I've installed the latest testing version, which has 2.6.32 kernel perfect for me. I was very amazed when check system monitor and saw it runs with 90MB RAM, meanwhile my ubuntu desktop takes only 400, and the pocket version of ubuntu on vmware has 180MB RAM.
The questions is: Debian runs on vmware 7. Could the amount of RAM change when switching to a normal environment? Or I have to test and see what is happening..What problems could occur when using a testing version?
View 8 Replies
ADVERTISEMENT
Nov 8, 2015
I'm trying to set up my Intel Wireless 3945ABG (which is supported in the kernel) and I don't understand where to start if I want to use systemd to do this.
I've installed my Debian (Stretch Alpha4) base system using the wireless to download the necessary components but when I boot into the system I need to set up the wireless card separately.
I would prefer to be able to install wireless without the requirement of connecting via ethernet so no package installs other than what is downloaded by the installer.
I can't even find documentation on this specific issue because everyone seems to reference /etc/network/interfaces which AFAIK is not supported in systemd. How do I configure a wireless card using only systemd?
View 2 Replies
View Related
Oct 3, 2010
but I have been literally banging my head against the wall.I am trying to configure skype on my system (testing, x86) but unsuccessfully.Let me say that I am now using skype (static) as downloaded from skype website.
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
[code]....
View 3 Replies
View Related
May 4, 2011
I want to learn about setting up Shorewall, but the website refers to several versions. How do I ascertain which version of Shorewall is on my system?
View 1 Replies
View Related
Jun 14, 2010
I have been searching the forum regarding info about the debian testing going into freeze, but cannot find specific info regarding some of the facts. I understand that after some time the testing version (squeeze currently) goes into "freeze" before it becomes the new stable. Now, what does freeze actually mean? Currently I'm running Squeeze, and updating as the update software suggests, and since first install, I got a new kernel image, some updates to applications I use etc etc. So, when testing goes into freeze, all updates are stopped and only bugfixes are released, am I right? But I'm curious about one thing, for example I have gnome DE with let's say network manager applet 0.8.
So when testing is done with freeze and becomes the new stable - does it include current versions of kernel and programs that were actual during freeze? Will I have network manager applet 0.8 after freeze is gone to stable, or will it revert to... dunnno 0.7.6 version? At this time I have kernel version 2.6.32-5-686 , when I first installed it was 2.6.32-3-686 , so when going into freeze then stable kernel won't be downgraded, right? Btw I'm not using Sid's repositories. Well I least I think I'm not, the sources.list doesn't include sid's repos... Well sid non-free is there.
View 10 Replies
View Related
Apr 16, 2016
I use the stable version of Jessie.I think about migrate to the testing but actually only KDE is suit for meso I need to know whether a new version of this desktop is sufficiently stable or not.
View 6 Replies
View Related
Oct 21, 2010
I get the following on startup:
(==) Log file: "/var/log/Xorg.0.log", Time: xx
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) open /dev/fb0: No such file or directory
[Code].....
My usual aptitude safe-upgrade routine has not throw any errors. I do remember a libxcb-* package updating (or installing?) on the last run. This is the only relevant package I can recall.
View 14 Replies
View Related
Feb 9, 2011
I have an older system that has been running testing for about 4 years. Originally I was running testing for several packages that were not yet available in stable. However, now that this system has a more crucial role in the network I have considered moving it to stable in hopes that it I can gain some insurance on it's uptime. It is important to note that I have never had a problem with the testing distribution and would be quite content to continue running it; I do want to know my options though.
I have not yet updated the system since the stable release of squeeze, I am considering to change my sources from testing to stable and just let apt take care of the rest. Anyone have any experience with such a thing? After searching Google I have found some solutions to force a downgrade, but that is really not what needs to be done here. I suppose I should have switched my sources to squeeze some time ago and this probably would have worked itself out.
A similar question is what happens a couple of years from now when another release happens. Have you had good luck updating from old stable to stable? I've run testing on several machines now for several years and have went through freezes and dist-upgrades several times with no major problems at all. Will I see the same stability if I move to the stable distribution?
View 1 Replies
View Related
Feb 22, 2016
After the latest update of network-manager-gnome to version 1.1.90-3 , I see that I have to start the nm-applet in Testing from a terminal, otherwise I can't bring up my wired connection.
The usual nmcli networking on command is failing to connect, also restarting the network-manager.service with systemctl doesn't do anything, the only way to connect at this time is indeed to manually start the nm-applet from a terminal.
I've also spotted this message in the logs:
Code: Select alltraps: nm-applet[1105] general protection ip error:0 in libgobject-2.0.so.0.4600.2
Could it be something wrong with my configuration (although , it worked before this update) or is it some bug in network-manager-gnome 1.1.90 ?
View 4 Replies
View Related
Feb 26, 2010
I've been working on the setup of a FTP server on my Debian system for the whole afternoon. But I can't get it straight! Normally I get it working in just a second, but it's been a while I guess.
I installed only proftpd-basic and it's default dependencies. Should be enough right?
My configuration files are as follows:
I created the user zeitgeist, gave it a password, group and a homedir. Group of the user is nogroup and the homedir is correct with the 755 permission. My port 21 for FTP is open I tested it with nmap -p 21 [ip-address].
My Filezilla client tells me that at first he is connecting, then the connection is established, And then the connection is closed by server.
View 1 Replies
View Related
Jun 30, 2010
For anyone using Blueman with Testing (Squeeze), todays Python upgrade to version 2.6 stops it from working due to a Blueman bug. This has been fixed in blueman version 1.21-4, which you can install from SID if you don't want to wait the 10 days for the normal migration.
View 1 Replies
View Related
Feb 17, 2011
I am running testing (with fluxbox) and my keyboard periodically freezes, meaning whatever I type in it doesn't respond. This lasts a few seconds (can be 2-3 or sometimes even more like 10) and one's it comes back I get all the keystrokes I was typing during the freeze. The frequency of the freezes can be like 4-5 times every hour and are very annoying. I can't seem to relate them to anything, they can occur during heavy usage but also when the box is doing absolutely nothing but waiting lazily for me to type some google search terms.
Can anybody help me track this problem down? At the moment I am using a wireless keyboard but this must be unrelated since I tested a couple of other keyboards (both wireless and wired) and the problem persists.
View 1 Replies
View Related
May 19, 2011
can't use catalyst driver, virtualbox refuse to run, selinux problems,I want to know if its possible to install only this new kernel 2.6.38 without "contaminating" the rest of my installation with unstable packages?
View 2 Replies
View Related
Jun 6, 2011
After doing a aptitude full-upgrade I no longer have the Debian menu showing in the Openbox menu. According to Obmenu, Debian is listed; it's just not showing when I right click. The upgrade brought a new version of Openbox so I assume that has something to do with it.
View 9 Replies
View Related
Sep 14, 2010
I'm trying to install Debian-testing to an ASUS 1018P netbook on which I have successfully installed Arch in the past. I'm installing from an external DVD drive and when I get to the point of network configuration it fails. I'm connected via Ethernet via eth0 which is recognized. Here is the last part of the ouput:
kernel: [ 1807.932848] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
kernel: [ 1807.933453] ADDRCONF(NETDEV_UP): eth0: link is not ready
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 8
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 15
code....
View 14 Replies
View Related
Dec 22, 2010
I have been trying to install fglrx drivers for my ATI card with Debian testing (x86) but without any luck. I have tried what it says here http://wiki.debian.org/ATIProprietary but I only come up with a blank screen (and also invoke-rc.d gdm stop does not work either?) I have also followed the directions at [URL]....html and that doesn't work either (make error 127). I must be doing something totally wrong.
View 6 Replies
View Related
Jul 5, 2011
AMD 64 Upgrade to testing last night killed my internet connection. The lan works, I can ping the dns server from my IP, however no mail, browser possible. Is something in testing broken again?
View 5 Replies
View Related
Jul 1, 2011
I just updated my Debian testing as usual (apt-get update && apt-get dist-upgrade), and it totally screwed up Nvidia drivers. I had to revert to integrated graphic card to start Xorg.
After that, I noticed that libgl1-nvidia-glx is missing, and when I tried to install it back, it produces the following:
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libgl1-nvidia-glx : Depends: libgl1-nvidia-alternatives but it is not going to be installed
E: Broken packages
Any ideas what's going on with it?
View 14 Replies
View Related
Jun 2, 2011
I'm in the process of testing upgrade -yes, upgrade, no fresh reinstall of my old trusty 11.2 to the unknown 11.4. One of the applications I need is VMware. I'm using vmware server, and I'm thinking of migrating to the player version, because the server is
not supported, it seems.I have installed a small test partition with 11.4, and in it I have installed VMPlayer. It looks nice (I had to install a lot of development packages, gcc, kernel-source, etc - nothing new here). Sound in the guest (I'm testing my virtual Windows Me) works; it wasn't working in the server. Nice surprise.
One missing feature is snapshots. The trick is to simply replicate all the files of the virtual machine to a backup. It is huge space wasted, 9 GB for a small machine, but it is doable. One thing I do not know how to do: VMplayer gives a notice that the virtual machine is version "Workstation 5.xx virtual machine", and that this version'x CMOS is not compatible and will use a default cmos instead. But I have not seen anywhere how to choose or change or upgrade the virtual machine type.
View 9 Replies
View Related
Mar 23, 2010
i have to reinstall my pc with a testing version. The installation almost is the same as stable version (lenny). But, the problem is that, i can't login it after the installation completed. The new user i created during installation is invalid! So, i have to enter the single user mode, to my surprise, the new user(i created before) doesn't exist! So, i add a user here.But, i still can't login to my system as the normal mode.How should i resolve such a problem?
View 4 Replies
View Related
May 17, 2011
EDIT: This thread has taken a different turn, please go down to viewtopic.php?f=30&t=64242#p370832 Below is I originally wrote, now totally irrelevant.:D I am delighted/bored with my one Debian Squeeze install, so I've decided to free up a partition to play with another configuration of the universal OS.At the moment I am liking the looks of the supposedly not so unstable Sid; what's the ideal download/install path to get Sid up and running? Is it:1) I already have a live Squeeze GNOME DVD lying around; should I install that again and upgrade to Sid?
View 6 Replies
View Related
Feb 6, 2016
How to make debian desktop full screen in vmware? I am using vmware workstation ...
View 1 Replies
View Related
Mar 22, 2016
Following VMware recommendations on how to change linux I/O scheduler for guests, I'm trying to do it on my VM machine running Debian Wheezy. At the moment I'm running kernel backports:
Code: Select all$ uname -a
Linux brutus2 3.16.0-0.bpo.4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u3~bpo70+1 (2016-01-19) x86_64 GNU/Linux
The default I/O scheduler at the moment for device /dev/sda is CFQ, and I can change it on the fly to NOOP:
Code: Select all$ cat /sys/block/sda/queue/scheduler
noop deadline [cfq]
$ echo noop > /sys/block/sda/queue/scheduler
$ cat /sys/block/sda/queue/scheduler
[noop] deadline cfq
[CODE]..
View 1 Replies
View Related
Mar 18, 2010
I just installed Squeeze on an older PC. Installation seemed to go fine. But when it booted up on the installed system for the first time, I could not login - username/password failure. I tried every possible typing error and CAP LOCK error I could have made - still nothing.
I brought up a console window and tried logging in as root - same problem.
I booted into single user mode and entered passwd command to set new root password - I got a SYSTEM ERROR message from the passwd command.
I booted to a Live CD, went to /etc/shadow and deleted the encrypted password. Rebooted on the hard drive, went to console window and logged in as root, with no password required. So far so good. I entered passwd command to set new password and got the same SYSTEM ERROR message.
The machine seems fine when running on the Live CD, and the install seemed to go fine.
View 14 Replies
View Related
Mar 17, 2011
Is it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
View 1 Replies
View Related
Feb 28, 2009
I am a ubuntu user but I want to go to the next level to use debian because what I heard of it, but I get confused to what to install on my computer do I install debian testing or debain stable with testing repositories.
- I want to use this system to the home use only.
- I want to use the newest packages because the stable packages is too old to use.
- What about using more than one repository i.e stable with testing with unstable at the same time (the same sourcelist)
- Is the testing and unstable sid packages good enough for the home use?
View 5 Replies
View Related
Feb 10, 2010
kernel with which most version number may be compiled in Debian 5 stable without updating to testing? 2.6.32.8 can't compile, if not turn off virtualization, since Documentation/least/least.c
contains
#include <sys/eventfd.h>
which is present in libc6-dev from testing, but is absent in stable.To drivers compiling kernel used own linux/eventfd.h.
View 6 Replies
View Related
Dec 29, 2010
there seems to be a very important bug with php 5.2.6 (mb_send_mail, [URL]). Unfortunately this affects my php applications greatly. I am currently running debian 5.0.7, with the latest updates. how to upgrade my php.
View 1 Replies
View Related
Mar 15, 2011
Laptop Amilo L1300, installed Debian Squeeze from netinstall from scratch a month ago. Installed Xfce as a DE afterwards.
This laptop usually has problem with: ACPI, Wifi and tons of other stuff usually Kernel related and is really picky about kernel version!
Now - with Lenny it worked without problems, but it had gnome and ext3 so I took a gamble and did a fresh install of Squeeze with Xfce with Ext4 filesystem and overall performance of the computer was faster and more responsive.
For wireless I have to use[url]
It all worked 100% until a week ago (roughly).
I do not use synaptic nor update manager, so I updated the system via terminal (as root of course) "apt-get update" and "apt-get upgrade". And I noticed it will upgrade kernel. I went through the upgrade process, as I thought it's all a 2.6.32-5-686 kernel version and it will not brake anything since it IS a stable branch of Debian and it will not install new kernel. Of course it did not install 2.6.34 or anything like that...
After the update I began experiencing problems, first with mouse pointer, it became invisible and goes back visible and resume from suspend, also wireless randomly disconnects and sometimes won't reconnect to wifi network, as I found out it's all kernel related problems (googled it up). I do not know how to go back to previous kernel version, since in Grub2 menu it only points to one and only kernel version, as I reckon it's the same version but with bugfixes? Or should I say buy UNfixes. I tried using a liquorix kernel 2.6.32 but as he works, has problem with ACPI as I presume since it freezes the system on random occasions.
Please, what EXACT version of kernel was in Squeeze like 3 weeks ago? And how can install that particular version of kernel, since it was the only one that worked besides the one from Lenny.
"uname -r" says: 2.6.32-5-686
That's what it always said.
Is it possible I had, dunno 2.6.32.28 and it was updated to, dunno, 2.6.32.29 or some later one?
I managed to google up this:[url]
And how can I go back to 2.6.32.28 kernel for instance?
Should I use some of the snapshots from [url]?
View 2 Replies
View Related
Jul 31, 2011
I am using Squessze and Gnome. When I try to use the gui System>Administration>Network or Users and Groups I get the error The configuration could not be loaded. You are not allowed to access the system configuration.Everything was working before. I read around a bit. In some cases,it was caused by mismatching group and password files after using the gui. I do not know how to check if they are matching. Of course I do not know for sure that is the problem in my case.
View 14 Replies
View Related
