I set my Network Adapter to the NAT setting, and ran an ifconfig for my machine. All the I got back was eth0 and lo. eth0 has the static IP configured I configured back in the days where I was running my VM Bridged with DHCP. Do I need to reconfigure my eth0 settings now and if so how?
View 1 RepliesInstalled CentOS 5.5 on VMware ESXi server running vsphere 4.1. Installed fine and picked the E1000 network adapter. But can't get the adapter to become active and pick up an IP address. Has anyone done this before? I can't get it to work. When i was testing CentOS out i used VirtualBox and worked fine using bridged networking but just can't seem to get this network card working.I've put some pictures of the config i've got.http:[url]....
View 2 Replies View RelatedI am using vmware player 3.1.3 and mounted in it an .iso of OpenSuse 11.3. Everything works fine, except the internet connection. For example, when I try to go to a website with firefox the page never displays. What do I have to do, so that the internet works?
View 1 Replies View RelatedTo setup a Compact Wireless-G USB Network Adapter (WUSB54GC) on Fedora 12 ?
View 1 Replies View RelatedI installed and tested both Windows server 2003 and Red Hat 9.0 with vmware workstation7. After installing 2003 can access internet but Red Hat can't. I want to test squid proxy server, send mail server, webserver etc. So, I would like to know how to setup WMware's network configuration for Red hat can access internet.
Below link is the configuration of VMware network setup both Server 2003 and Red Hat.
Here is Red Hat Configuration:
http://i64.servimg.com/u/f64/11/74/16/17/linux10.jpg
Here is Windows Server 2003 configuration:
[url]
I am using wireless connection to access internet.
I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
how do i configure wireless usb adapter to work with backtrack 4 on vmware
View 2 Replies View RelatedI recently installed the latest and greatest Lubuntu 64 bit, because I like lxde and I am planning a system migration. (I am really starting to not like windows 7.) I have some linux experience. I wouldn't say I am awesome at it, but I am comfortable trying anything.
Example: I have used CENTOS 5.6 to make a linux machine server as a glorified router, with asterisks, SIP, SSH server, x windows, GNome, VNC, and a user authentication system. and get this I walked somebody through setting this up over the phone. I reopened the root account (I honestly got tired of typing sudo every other command is the only reason why I opened it.) I plan on closing it after we are done.
lsusb lists the wireless adaptor
Wireless Card Link
[[URL]
I have the driver CD. I installed ndiswrapper.I copied the files from my driver cd to my <home> Directory. Then installed the Windows XP version of the drivers using ndiswrapper -l <driver>. I then made ndiswrapper force the driver to the vendor ID of the wireless card. Using ndiswrapper -a <vendor ID> <Driver>(I did this last night and the vendor ID escapes me. I am at work now.)I finally ran depmod -a and modprobe ndiswrapperI goto the windows wireless driver application, and it shows the driver as loaded and the hardware as found.
However, it still does not list a wireless device in the network manager to where I can connect to my wireless. iwconfig does not show any wireless LAN, but it is still listed in lsusb. Also, the light that shows activity on the wireless device does not light up or blink at all. I have about 6 usb ports on my desktop and have tried everyone. The wireless card also works in Windows 7 64-bit On a strange side note. I do have internet access through LAN, (My laptop is atm a glorified wireless card .)
Currently i'm doing molecular modeling using LINUX, VMware player. Well i face some problem while using this player.
1) 'there is not enough space on the destination' when i want to paste some files in LINUX desktop.
2) the most left corner 'hidden button', once you press all the tabs gone (application & terminal) . How to restore this condition?
I want to run ubuntu and centOS on vmware player.I have ubuntu9.10 already installed on my system.which version of vmware player should i install to make it work.
View 1 Replies View RelatedI had installed vmware player in my windows 7 OS. How to work on virtual consoles in vmware player were I had installed linux.
View 11 Replies View RelatedMy computer has 512 mb ram..i am using xp..i want to install ubuntu 10.04 within this xp(without dual booting).I heard about virtual machine such as virtual box or vmware player that help us to do the same..so i want to ask which one will be good practice vmware or virtualbox..remember i have only 512 mb ram...
I have also doubt regarding these quereis..
1) can i install software of my choice in ubuntu after installation.
2) can i access internet by ubuntu
3) if i keep some data in ubuntu...will it be kept there also after machine shut down.
Actually i did dual booting xp and ubuntu..i succeed but sometimes my computer get stucked due to low memory..
it?I have Ubuntu 10.10 (and Ubuntu Server) on a factory Dell Inspiron 530. It's running an Intel Pentium Duo Core CPU (1.6GHz), has 1GB RAM, and VMware Player installed. When I boot XP SP3, it runs, but randomly crashes. I managed to update IE6 to IE8 without crashing, but when I tried to download MS Office 2010 Professional (Trial), it crashed near the end of the download. I got a blue screen with the following:
"STOP: 0x0000000A, 0xB2EEf304, 0x00000002, 0x80508008
It then begins a physical dump of memory, completes, then automatically reboots XP in the virtual machine.
Every time it does this, it shows different memory addresses.
BTW, I also watched performance while doing this. As soon as CPU hit 100%, the download crashed, and soon after, XP crashed, sometimes locking up the physical machine.
I'm new to Fedora 14, vmware player. After getting Fedora up and running in VMware player. The disk size was 2.7 GB. After three hours of working with it, the disk size has bloated to 4.3 GB. I havent added software to account for the near doubling in size. How do I reduce the size back to 2.7GB range or lower. Im new to Fedora and superuser controls. Im removing more software than adding software. Is this a VMWARE problem or Fedora problem?
View 1 Replies View RelatedI want to explore DNS and Sendmail. So I downloaded exe of Vmware 2.0 on Windows Xp. I installed Fedora Linux on Both.
Now I have bridged networking and do did provided:
Instance 1:
Machine IP: 192.168.1.100
Instance 2:
Machine IP: 192.168.1.101
BIND Software is installed on both the machine.
I want to make 192.168.1.100 as Server and 192.168.1.101 as Client.
Also do let me know how can I setup DNS server?
Will it be possible to learn DNS server and client configuration through VmWare?
I'm running Ubuntu 10.04 inside VMware Player running under Windows Vista and I can't connect to the internet or the host computer from the Ubuntu.
I have set all the VMware services to manual (like VMware DHCP Service), but starting them manually doesn't help.
In VMware, the network seems to work (there is a green dot beside the network icon) and I have tried both Bridged and NAT settings.
ifconfig doesn't show the eth1 interface, unless I give it as a parameter (or use -a). I think this means that Ubuntu thinks that the network isn't connected at all.
I was trying to install vmware player 3.0 and it prompt that it require the kernel kernel-2.6.35.6-45.fc14.i686 to be compile before it start.
Quote:
Kernel headers for version 2.6.35.6-45.fc14.i686 were not found. If you
I try following but unable to find.
Code:
Nothing to do
Code:
Code:
Then I try to map to the file, but not working.
I am trying to mount a shared folder from windows xp to my ubuntu vm. It is running in vm player.
I installed samba with sudo apt-get smbclient smbfs
Next, I run smbclient -L computer_name_here and get the error NT_STATUS_LOGON_FAILURE. What am I doing wrong? How can I solve this?
I have installed VirtualBox on Ubuntu 9.04.Two Guest Machine Fedora 9 and Fedora 11 is installed on the same. I selected NAT as Ethernet Interface and now I can see 10.0.2.15 and 10.0.2.15 as the both interface address in eth0 respectively.I can ping google.com and working.Now I need to make fedora 9 as server and fedora 11 as Client. How Can I make them in same network.I cant see Bridge Network anywhere only NAT, Host Interface, Internal Network..are available.
View 1 Replies View RelatedSince installing Fedora 14, I have found that everytime I run Vmware player it goes through the compile sequence. It works fine after that. It should only compile if the kernel has changed. Anyone else with this problem? Any ideas what is wrong?
View 5 Replies View RelatedI'm running OpenSUSE 11.4 x86 with KDE 4.6 and kernel version 2.6.37.6-0.5. I'm not advanced linux user, though I'm trying to use it occasionally for getting more experience. Now I want to check which of the virtualization software suits me better, I've already tried VirtualBox and now I want to try VMware. I know that it has a lot of products, but for just home use I guess that I need only player. So, when I try to find it through my default repositories, I just was able to find this vmware-guest-kmp-default . I don't know what is it, so I tried to search through the OpenSUSE Build Service, but there's also no player package. I've already downloaded the source from the official site and yes, I do know how to built binaries from the source, but I know also, that after installing in a such way, it would be difficult for the package manager to track the software, as it's not rpm. So I want to ask you first, if you know any other way, to get the RPM package of the VMware Player from any suse repository.
View 8 Replies View RelatedI am trying to ge my vm player to run. I have installed the program. Next, I go to shortcut location. upon startup of vm player it gives me this error:
Before you can run Vmware Player, several modules must be compiled and loaded into the running kernal.
Kernel Headers 2.6.35-22-generic
Kernel headers for version 2.6.35-22-generic were not found. If you installed them in a non-=default path you can specify the path below. Otherwise refer to your distribution's documentation for installation instructions and click Refresh to search again in default locations.
Location: blank box Browse Refresh
Cancel Install
I have tried everything that I have found, but nothing works.
I have Backtrack4 installed as a dual boot with Vista in my Acer Aspire 5315 laptop. I can connect to my access point with my inbuilt wireless Atheros AR5007EG wireless adapter by starting services/network and WICD. The problem I have is connecting my Alfa network RTL8187 wireless through WICD or wireless assistant. My Alfa network adapter works fine as I have used it with Aircrack-ng in BT4.
View 2 Replies View RelatedI tried to get vmware player 7.6 to work after upgrading from Wheezy to Jessie. I downloaded kernal headers 3.16.0-4-amd 64 as the dialog box said to do. After doing that and attempting to install I got this message “C header files matching your running kernel were not found. Refer to your distribution's documentation for installation instructions.” At this point I wondered if it would be better to try a more recent version of Vmware player. So I downloaded Vmware Player 12.01. I could not get it to open.
View 10 Replies View RelatedI have a Linux guest OS in VMware player installed on my Linux host OS. I'm using the guest OS as a server that my host OS workstation will connect to for certain things. However, I want to run VMware player (and the guest OS it runs) headless - i.e. without its interface opening up. This is because I any commands I need to send to the server I do so using my host OS terminal, with commands such as ssh. I tried running 'vmplayer /path/to/guest-os.vmx', but that just triggers opening up the VMware player interface, which isn't what I want.
How could I make this work? Is there either a VMware-specific way, or maybe a Linux-specific way involving suppressing the interface or doing some other Linux magic related to GNOME or X or something? I've read somewhere this might be possible using VMware Server - is that true? In that case, is it actually not possible to do it in VMware Player? I hope it is possible because I really like the performance and simplicity of VMware Player and would prefer not to move to VMware Server.
I have 3 network adapters on my Linux Machine. All I want is whenever I ping I want to use 1st Adapter card.In the same way, the next time if i want to use the 2nd Adapter for my other application, I should use the 2nd only. How gonna it be possible?
View 1 Replies View RelatedI cannot configure my network adapter in backtrack. I just downloaded backtrack 4 and the network adapter a Realtek PCIe FE family controller seem not to be working.
View 1 Replies View RelatedI keep installing Debian Workstation Player on Debian, but it just doesn't open. I think it might have something to do with the VMware kernel modules not being built or something. How can I start troubleshooting this? Also, why isn't VMware packaged? Has no one tried packaging it yet, or is there a more complex reason?
View 3 Replies View RelatedI tried installing VMWare-player using
Code:
#./VMware-Player-3.1.2-301548.i386.bundle
It got installed successfully, but while running it said gcc not found. so i installed gcc by
Code:
#yum install gcc
[Code]....
I had installed Karmik Koala on VMware� Player 3.0.1 build-227600 and it ran perfectly well for four months. Today I upgraded to Lucid Lynx (lts) from within the VMware Player. The virtual machine restarted after the installation, now I can't direct my keyboard input to log in to my Ubuntu account. The mouse works but not the keyboard. How do I resolve this mess?
View 9 Replies View Related