I am not able to connect to the internet via Ubuntu guest in Vmware Workstation. Here is the ipconfig:
Here is the ifconfig -a:
I have the vmware os settings to connect through a nat connection and I am able to ping domains however I am unable to open a page in either firefox or chrome.
finding / mapping network shares on Win 7 guest in vmware. I am running 10.10 64 bit ubuntu and installed vmware workstation 7 (64 bit version). I created and installed win 7 (ultimate) vm. everything is good so far. The issue is I have a second desktop with ubuntu and I have shared 4 drives on that desktop. I want those shared available to the win 7 guest. And even after enabling the shared folders I do not see them.
Note: I have a shared folder on the same machine where I have vmware installed and win7 has assess to that drive.. its just that the shares on network are not available. Note2: i had virtualbox installed and it worked fine.
I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
I'm running Ubuntu 9.1 i386 in test with Vmware 2.0.2. I used Radu Cotescu's patch and instructions to get vmware installed. Everything seems to be running fine in the guest machine (CentOS 5), except I can't ssh from the Ubuntu host to the guest machine.
This guest is a clone of one that is running under on my Ubuntu 8.1 host and networking is fine there. I'm wondering if there were changes to routing or bridging in Ubuntu 9.1 to cause this. I've been digging through google for a while, but haven't seen others reporting any issues. This is definitely particular to Karmic Koala though.
The host's routing table is:
Code:
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 * 255.255.255.0 U 2 0 0 wlan0
192.168.0.0 * 255.255.255.0 U 0 0 0 vmnet3
[code]....
My routing table on the Ubuntu 8.1 host differs by the link-local line only, and the guests are exactly the same.I can ssh from the guest into the host, as 192.168.0.2 is the hosts ip on the vm network. The host should be able to ssh to the guest as it does in Ubuntu 8.1.
I have VMWare on a notebook, guest Windows running on Linux host. The network in that virtual machine is configured as NAT. I want to share/transfer files from Linux (host) to Windows (guest). So I leave sshd always running on the notebook, I go into Windows and run an SSH/SFTP program. My Wifi router has address 192.168.1.1, my desktop has address 192.168.1.2 and my notebook has address 192.168.1.3. On the notebook, that SSH/SFTP program connects to 192.168.1.3 (i.e. the notebook itself) and everything works fine. But it's a notebook, and when I leave home with it, 192.168.1.3 is no longer accessible. How can I let the guest OS connect to the host OS when I'm away from my Wifi network?
View 1 Replies View RelatedI am running VMware workstation on a Linux host and WinXP guest using NAT. I have shared a folder on WinXP, and I am able to mount it on the linux host with:
mount -t smbfs -o username=Administrator,password=mypasswd //192.168.100.129/Shared /mnt/tmp
This works fine. However, I want to mount the same folder from a different linux machine (not the host).
I added port forwarding in /etc/vmware/vmnet8/nat/nat.conf:
[incomingtcp]
#445 = 192.168.100.129:445
If I run:
mount -t smbfs -o username=Administrator,password=mypasswd //external_ip_number/Shared /mnt/tmp
I am getting:
mount error 112 = Host is down
Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
It doesn't work even if I try the above command from the linux host itself. It only works if I use the internal IP number. I suspect vmware is not forwarding port 445 but I am not sure how to verify it. I am not running smbd on the linux host, in case that make any difference. I didn't think that was required because the server is really on the WinXP and the linux is just a client.
My problem is next: I have Public IP-addresses (ex. 80.237.x.x) and this IP-addresses join to network interfaces (eth0:0, ... eth0:5) and I have local IP-address of Guest System 192.168.122.111 of NETWORK 192.168.122.0.What I can do here if I want assign Public IP-address for Guest System? Because if I want connect to my Guest System through any computer in world (ex. through SSH) I should have public IP of guest system (not private, ex.192.168.122.111).
View 4 Replies View RelatedI've been trying to understand how Linux creates the network/interfaces on a machine (been reading the Linux admin guide), but as I'm pretty new to this subject, I've got lost in the forest.
To provide with my goal:
1.) Learn about network setups on Linux
2.) Be able to maintain my own (virtual) network
3.) Configure my (virtual) network
Red Hat Enterprise Linux 5 kernel supports four I/O schedulers:
- cfq (Completely Fair Queuing)
- deadline
- noop
- anticipatory
I read in documentation that the recommended kernel line settings for 64-bit Red Hat Enterprise Linux 5 running as a VMware guest are:
divider=10 notsc iommu=soft elevator=noop
But for single instance databases with dedicated storage the deadline scheduler is recommended. The deadline scheduler reorders I/O to optimized disk heads movement and caps maximum latency per request to prevent resource starvation for I/O intensive processes. I have an Oracle instance on RHEL5 running as a VMware(ESX) guest with dedicated storage. What scheduler is better in my case?
I have a new public mail server running under Vmware Server 2.0 installed on Windows Server 2008. I'm not satisfy about performance, virtual machine has got 3gb of ram and 2 virtual cpu. Physical machine has got one intel xeon cpu 2.4ghz quad core, 8 gb of ram and 3 hdd 500gb raid5. I already set this option: Fit all virtual machine memory into reserved host RAM. How can I increase performance? Are there any kernel build for virtual installation?
View 11 Replies View RelatedI have on my computer 9.1 and I want to try some virtualization. I want to install WinXP or 7 as guest on my U9.1 box. what is your opinion? Which VMware or VirtualBox should I try?
View 1 Replies View RelatedI've built a customized 2.6.32 kernel over Ubuntu 10.04 server (physically) -note: it is the same version that comes with the livecd-. Then I added my stuff, cloned the disk, applied it to 3 different hardware boxes and it works perfectly. But when I put that image on a VMWare Workstation 7.1 or VirtualBox machine it doesn't load... I get a "kernel panic: not syncing vfs unable to mount root fs on unknown-block 0,0". So, I've created a new vm, I've installed ubuntu and it booted without a problem.
I ran my kernel patching as I did on the physical machine, but when I rebooted with the new kernel, I got the same error. So, the problem seems to be something in the customized kernel, but specifically going over virualized copies. By the way - In a previous version, specifically Debian 5 with kernel 2.6.18, I did the same stuff about a year ago and the machine loads perfectly in any virtualized environment. Then, the only thing left to think about my problem is that some grub parameter or kernel driver or something is messing up with booting. The customization of the kernel is only the patching for IMQ stuff.
I am trying Lubuntu 10.04 as a guest in VMWare Workstation 6.5.4. My host is a Windows XP SP3 PC (soon to move to Ubuntu 10.04). The installation went fine and the vm seems to be working perfectly - all latest updates were applied and all the supplied software works.
However, the only item that is annoying is that Lubuntu always start up with 800x600 screen resolution. I can set the resolution to the one I want (1152x864) using Preference -> Monitor Setting but when I restart the vm again, Lubuntu always defaults to 800x600. BTW, my LCD monitor has a native resolution of 1920x1080 - a screen resolution of 800x600 is simply too small for my needs.
I note that there is no xorg.conf in the /etc/X11 directory and after researching the internet, I also found out that this is normal for the version of X that Lubuntu uses. I also tried out the 'xrandr' command on a console - this also works in setting the screen resolution to 1152x864 but it also is NOT persistent across restarts.how do I make the vm always start up in the resolution I want - 1152x864? I don't want to fiddle around in xorg.conf if this can be avoided.
[There are quite a few outdated guides relating to older versions of Fedora, so I figured that I'll write it up specifically for Fedora 12 to make life easier for others]
This guide is based on a fully patched Fedora 12 distribution as of Feb 5 2009.
A default install of Fedora 12 as a VMware Image (Guest) will generally fail to install VMware Tools for the following reasons (In the Fedora 12 Guest Image):
1. GCC and related packages are not installed
Make sure that 'yum list gcc*' has at least the following packages installed (these are not installed by default unless you select developer configuration).
[root@localhost ~]# yum list gcc*
Loaded plugins: presto, refresh-packagekit
Installed Packages
gcc.i686 4.4.2-20.fc12 @updates
gcc-c++.i686 4.4.2-20.fc12 @updates
2. Correct kernel-devel packages are not installed. This generally manifests itself via the following prompt:
'What is the location of the directory of C header files that match your running kernel?'
Fedora 12 installs kernel-PAE by default instead of the normal kernel rpm for the i386 distribution. Consequently, the header files required by vmware-config-tools.pl are found in 'kernel-PAE-devel' and not 'kernel-devel'.
[root@localhost ~]# yum list kernel*
Loaded plugins: presto, refresh-packagekit
Installed Packages
[code]...
The symlink /lib/modules/2.6.31.12-174.2.3.fc12.i686.PAE/source should work if the correct kernel-*-devel package is installed. vmware-config-tools.pl seems to only check this link to determine if it has found a legitimate kernel header directory.
I'm trying to install the vmware tools in Fedora 13. I've run the following commands as root:
yum install gcc -y
yum install kernel-devel -y
./vmware-install.pl
...
when it asks for the location of the directory of the C header files that match my running kernel I entered:
/usr/src/kernels/2.6.33.4-95.fc13.i686/include
but vmware-install.pl says:
The path to "/usr/src/kernels/2.6.33.4-95.fc13.i686/inc" is not valid..
When I run as a VMWare Player guest (Win7 host), I sometimes lose keystrokes (several times a minute) or have repeat keys like thissssssssssssssssss (not as often).This doesn't happen with WinXP guest on the same VMWare installation, or Suse running outside VMWare on the sam hardware, so I suspect the combination of Suse guest + VMWare Win7 host.
View 1 Replies View RelatedCommand to get guest information in Vmware ESX?
View 1 Replies View Relatedi just want to run linux(guest) on winxp(Host)on vmware. where i download linux guest. and how i installed the same in vmware runing on winxp.
View 3 Replies View Relatedwe are running dedicated server with CentOS. We installed VMware in order to run a win2003 server. the problem is we need to access that server from outside (public).
1. the centos server has 2 NIC cards: eth0, eth1, eth2 with 2 public ips.
2. when vmware was installed we bind it to eth1.
3. we tried assigning eth1's public IP to the vmware machine and its not able to access anything outside.
4. tried to use NAT, bridged and host-only and no luck.
I am trying to install vmware tools on redhat 5 linux guest os running on vmworkstation 6.5 with window vista host machine. After running rpm for vmware tool when run vmware-config-tools.pl command it ask for "what is the location of the directory of c header files that match your running kernel ? [/user/src/linux/include]
View 1 Replies View RelatedI can no longer drag files from my ubuntu host into my XP guest. I have vmware tools installed in XP and up until recently I could simply drag whatever I wanted back and forth between the systems. When I try to drag a file across into XP the cursor has the plus sign like it would normally to drop a file in, but now it also makes a selection box on the XP desktop. Same problem in Workstation and Player. I haven't posted on the vmware forums yet, I figured someone here probably has had the same problem. I don't think it was a kernel update. I restarted ubuntu with 2.6.31.18 which was fully functional before, still with the same problem.
View 1 Replies View RelatedNot sure if this post belongs here, but here it is.
Host: Win server 2003
Guest: Ubuntu server
Host: IS able to ping guest. Firewall is OFF. NOT able to access guest (which is a web-server) at browser.
Guest: NOT able to ping host. Running a web server, you can check the website: (pegajosa.com) is running under that virtual Linux server.
Problem: guest needs to access host's sql database and/or any resources.
Network: is bridged.
At the Linux box ifconfig -a code...
My Windows guests see my VMware Host Only folders as \.hostShared Folders But when I try to see them from a Linux guest, all I get is frustrated. No permutation of that seems to work. Because the Windows guests see the shared folders I know the host is doing its part in providing them. After two days of not finding an answer on the VMware Workstation forum I finally figured out that the problem really is how to look for them with Linux. With Linux I can turn off all NICs accept the Host Only NIC, put smb://172.16.138.1 into the address bar and see all the shares on the host, but not the folder designated as the host only folder.
View 3 Replies View RelatedI'm running Fedora 10 as host to vmplayer guests (win98se, Ubuntu 9.04). Each can connect to the Samba server and give me access to my home directory and 'backup' partition. Samba and nfs are both running. So far so good.
I've just installed Fedora 11 as a vmplayer guest. When I click Places > Network Nautilus opens up showing only Windows Network. Double-click on this item and I get a pop-up message: "Unable to mount location. Failed to retrieve share list from server." SELinux is disabled for the moment. I tried to mount the 'backup' partition: mount -t ext3 catinthehat2:/archive /mnt/archive but get the message: mount: special device catinthehat2:/archive does not exist.
I have rhel5 as host and guest is xp and rhel5, how will I make a network between them.
View 3 Replies View RelatedI currently have VirtualBox installed on my Ubuntu 9.10 Desktop. I have windows xp as a guest os and it has network shares on it. My question is, is there a way for another computer to access those network drives on the guest os in virtualbox? I don't want to search for hours on end on google, a simple no would be fine - however if it is possible let me know because when I am in windows on another computer that has windows as a host os it sees it in the windows network folder but it says "....network location not found" or something similar but it still shows a pc picture of the virtual os of the virtual box program running in ubuntu.
View 1 Replies View RelatedI have debian8.2 installed in VMware 12 with gnome desktop as guest os.
It boot into gnome successfully. But it will not boot into CLI mode and recovery mode. While boot into CLI, It is stucked in a blank screen, no cursor, after long long boot log splash in the screen.
To boot into CLI rather than gnome, I just set default.target into multi-user.target for systemd. I checked the syslog for boot into CLI, found that systemd execute getty 1~6, but it seemed to no success log and it seem to no other log for systemd. Is it failed to getty?
I check the grapyical.target and multi-user.target in systemd, find multi-user.target is the only one target required by graphical.target. Multi-user.target can be execute successfully during boot into graphical mode, while it will not be successfully execute during boot into CLI mode. That's is so unpredicted. Is there something else I missed?
I'm running VMWare Server 2.0 on WindowsXP as host.I have guest O/S Linux Fedora 8. i cannot access USB drives on my VM. USB drive shows up on the VMware console window as part of my devices, like CD/RW drive, etc. But for the usb drive, it is GREYED OUT./proc/partitions never shows a USB device upon connection of the drive. I have tried googling this to death and found no solution that works.
View 1 Replies View RelatedMy RHEL version is Red Hat Enterprise Linux AS release 4(Nanhant update 6) I installed Linux on vmware.My host is win xp.Am able to ping guest as well host.How i can copy the files from host to guest.
View 2 Replies View RelatedI am new to linux, it was nice to work with linux on virtual machine, but suddenly yesterday when I try to connect using putty from my windowsxp machine its showing network connection error. I dont know what happened. In linux machine ifconfig shows only 127.0.0.1, could not trace problem, guide me to trace the problem.
Previously it used to give 192.168.1.2/192.168.1.3 it used to vary every boot. FTP also stopped working. I am clueless. My system setup:
Del inspiron 1525:
RAM 3G
HDD 160G
Linux RHEL3 on VMWare
