I installed OEL4 on both of my Laptops using VMware with Windows 7 as HOST.
I want to configure RMAN. So I need individual IP addresses.
Now how can I ping these both Linux (OELs) from VMwares.?
How to configure the network b/w these two? I have a Ethernet cable. (No router)
In simple:
How to ping two Guest OSs (which are installed on two diff Laptops) which are in VMware with windows 7 as Host.?
I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
MY OS IS (Widnows XP ) I'm Using VMware Workstation 7 to run My BT4-Beta (backtrack 4)
in my OS Windows XP I have Internet I'm in big network our administrator using Cyberoam Client for Corporate to allow people using Internet.. so if any people connect this network they should has id in Cyberoam if they don't has id will can't connect to the internet.. they will redirect automatically to the log in page in Cyberoam.
So ! in VMware Workstation 7 i configure network adapter to Bridged and i see internet icon with green color but dose not browse internet and also i can't ping my computer this is mean network dose not appear to backtrack my computer is in the network when i try to do ping this is what happened.
And this output to try run network!
PHP Code:
And this is my ifconfig
How to do Step by Step to connect the network using VMware WorkStation!
I am not able to connect to the internet via Ubuntu guest in Vmware Workstation. Here is the ipconfig:
Here is the ifconfig -a:
I have the vmware os settings to connect through a nat connection and I am able to ping domains however I am unable to open a page in either firefox or chrome.
I have a server that is on both a standard network and a virtual network, as follows: server1 attached to standard network server1 acting as Dom0 with two linux DomU guests (under Xen) I only have one network card. How do I configure server1 to have a different hostname on the standard network than on the virtual network? Here are the relevant network configuration files for server1:
/etc/sysconfig/network-scripts/ifcfg-eth0:1
DEVICE=eth0:1
BOOTPROTO=none
NETMASK=255.255.255.0
IPADDR=192.168.122.9
[Code]...
today I tried to configure a network route to a host for testing my network interface. Code: route add 192.168.1.15 eth0 As I have to eth interfaces and both interface got their IP from DHCP (192.168.1.11 and 192.168.1.12) and are in the same subnet, I shut the other interface down:
Code: ifconfig eth1 down Then I tried to test the interface by doing a ping to 192.168.1.15.
Problem: When I unplug the cable from eth0 (and eth1 is still plugged) the ping still works. Somehow my linux (it's debian) powers up again eth0 and pings over this port.
How can I stop my linux doing this. I just want to have the route added only on the one interface - not the other. Is it maybe some case of a default-gateway?
I installed and tested both Windows server 2003 and Red Hat 9.0 with vmware workstation7. After installing 2003 can access internet but Red Hat can't. I want to test squid proxy server, send mail server, webserver etc. So, I would like to know how to setup WMware's network configuration for Red hat can access internet.
Below link is the configuration of VMware network setup both Server 2003 and Red Hat.
Here is Red Hat Configuration:
http://i64.servimg.com/u/f64/11/74/16/17/linux10.jpg
Here is Windows Server 2003 configuration:
[url]
I am using wireless connection to access internet.
finding / mapping network shares on Win 7 guest in vmware. I am running 10.10 64 bit ubuntu and installed vmware workstation 7 (64 bit version). I created and installed win 7 (ultimate) vm. everything is good so far. The issue is I have a second desktop with ubuntu and I have shared 4 drives on that desktop. I want those shared available to the win 7 guest. And even after enabling the shared folders I do not see them.
Note: I have a shared folder on the same machine where I have vmware installed and win7 has assess to that drive.. its just that the shares on network are not available. Note2: i had virtualbox installed and it worked fine.
Installed CentOS 5.5 on VMware ESXi server running vsphere 4.1. Installed fine and picked the E1000 network adapter. But can't get the adapter to become active and pick up an IP address. Has anyone done this before? I can't get it to work. When i was testing CentOS out i used VirtualBox and worked fine using bridged networking but just can't seem to get this network card working.I've put some pictures of the config i've got.http:[url]....
View 2 Replies View RelatedNow I'm using a router to connect my computer to the Internet. I installed VMware Workstation 7 on my computer and installed a guest OS which is CentOS 5.3. Now I want to using putty to connect to the guest OS in my host computer, and I need the guest os can access the Internet too. How can I configure my host's network, guest os and my router?
View 1 Replies View RelatedI am doing a project based on the AD-HOC network. i have to do this on the two linux systems currently i am using fedora 13 and opensuse 10.3 beacuse the two laptops supports only these. the exact problem is how to configure the adhoc network to connect these two systems urgent reply needed please
View 1 Replies View RelatedI am planning to configure RedHat cluster on vmware, i dont know how to configure, i googled a lot but couldn't find satisfactory docs for configuring, can any one provide me step-by-step or good docs to go ahead.
View 1 Replies View RelatedI'm setting up a home webserver with Ubuntu 10.10 and want to configure the interface to static. I'm using a router, which is setup and working correctly. I have been using linux workstation with dhcp for some time.
I've edited my interfaces file to reflect the parameters for setting static ip, with the exception of 'network'. No matter what I put into this setting, it causes me to loose connectivity to the outside world. I've tried to put my router IP, and my IP set by my provider. What should the 'network' value be?
At this time, my 'interfaces' files only includes the following and has connectivity out to the internet:
Code:
Do I need the 'network' settings as shown in every tutorial (but never explained)?
I am using Redhat enterprize linux and using ethernet card Realtek PCIe FE Family Controller. I tried to configure my network card. But unable to activate it as message appears "No such device found" I am using Dell inspiron laptop.
View 5 Replies View RelatedI still cannot access to internet. May I know why?
Is it due to the Error for wireless request "Set Encode" (8B2A)
The step i did:
1) iwlist eth1 scanning
2) sudo iwconfig eth1 essid shabana key s:xxxxxx
3) invoke firefox ... cannot surf
Do I need to set dhclient? how should I set? DO I need to enable wpa_supplicant?
iwlist eth1 scanning
sound like I was able to connect to ESSID:shabana. Is it true?
The linux is Centos 5.4
how to configure my network for web traffic.Here is my setup:I have the following virtual machines, (all guest are running on CentOS 5.3);
firewall: Smoothwall 3.0, (hardware, not virtual)
guest # 1: Apache http server
guest # 2: Qmail server
guest # 3: Proftp server
I want all of these services on different machines for security reasons, (mainly the ftp server) how do I route the traffic from the firewall to the different machines? I have been looking at setting up a reverse proxy, however, everything that I have read says that a reverse proxy will not handle the smtp/pop3 traffic. Can I just use a DNS server to route the traffic?
I have configured my PC to run a linux 2.6 kernel in VMware and have no problem loading the image and using the wired network adaptor and the basic functions. I am having trouble finding the wireless network however. My Box has an " Intel(R) Centrino(R) Advanced-N 6250 AGN " wireless network adaptor. From what I can tell, this is supported by this version of linux. I have the adaptor enabled, my image settings as bridged, and the wimax enabled in the removable devices (connected). When I run WiCD manager I get the error message " Could not connect to wicd's D-Bus interface "
View 1 Replies View RelatedI'm on F14 and can't seem to get NetworkManager to behave. I seem to remember being able to start my machine and see my static address configured right after boot. For some reason, that's no longer the case. When I finish a boot, I'm not getting any address until I log in. I've tried editing the ifcfg-eth0 both by hand and by the system-config-network. I've played with the "Available to all users" checkbox on both the nm config applet as well as the system-config-network gui. I can't seem to get it to behave predictably and give me my static without having to be in a gnome session.
Here's my ifcfg-eth0 from /etc/sysconfig/network-scripts
I made a big mistake. While logged in as root i deleted the /bin directory by mistake. I cannot boot up now...I tried to re-install with the upgrade option...Did it partly but it does not go to the login. I tried a rescue operation and have gone into /mnt/sysimage...However I do not know how to copy my data files over the network to another computer. If I could do that it would be great...I can then backup my file and reinstall.
However I do not know how to setup the network in rescue mode..
Agter going into the network option ...It gave 2 places where I could enter the values ipv4 .and ipv6...I tried entering the old IP address in the first oprtion ........./....Its prompting for some entry to be put after the /. I think its a 3 digit input. Not sure what has to be done.with namesserver and default gateway....I have a small dlink hub and normally (when the system was running) I just needed to go into network manager and enter the machine ipaddress, subnet mask 255.255.255.0 and some value for the default gateway which was not really there....It worked, i could remote connect with another computer in my LAN. How do i enter the 255.255.255.0 in rescue mode?
Networkmanager applet does not allow setting ip address manually. The "Apply" button is grey. Is this a bug?
View 3 Replies View RelatedI'm trying to configure my network card using the b43 driver. I'm running 10.04.2 on the kernel version 2.6.35-25-generic-pae.
Surprisingly, I was able to connect to my home wireless network using the b43 driver without a problem. The only issue is that it doesn't automatically connect. I have to use the following command in order to get it to work:
Code:
After typing my password, I wait for 10 seconds and am automatically connected. My question is, how do I configure my system to do this for me permanently (or at least automatically) so I don't have to type it every time I log on?
How could I configure Ubuntu to be setup as follows...
Wireless Client ----> Wireless Router ----> Home Server ----> Internet
What is needed to make all of the wireless traffic go to my internet connection port. I will be having two ethernet cables plugged into the system one from the wireless router and one to my internet router.
i have ubuntu 10.10 and i want to configure my interface eth0 with the commande line with owner (not the Root)$ifconfig : this commande works and listed all interface with some description -> thats goodbut when i use some parametre like @ip and netmask
$ifconfig eth0 10.10.10.1 netmask 255.255.255.0
SIOCSIFADDR: Permission denied
SIOCSIFFLAGS: Permission denied
[code]...
I am trying to configure VMWare tools to work with the linux-virtual kernel, but every time I supply the headers path to vmware-config-tools, it rejects it. What should I do to configure it?I am using the path:/lib/modules/2.6.35-23-virtual/build/includeBut I get the rejection message:The path "/lib/modules/2.6.35-23-virtual/build/include" is not valid.It works with the generic version, so what am I doing wrong?
View 2 Replies View Relatedhow do i configure wireless usb adapter to work with backtrack 4 on vmware
View 2 Replies View RelatedHow do I configure a network bridge to start on boot?
I have two network interfaces eth0 and eth1.
Here is my current network script configuration:
Code:
#/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
HWADDR=00:10:18:4e:5e:a7
[Code]....
The bridge will come up if I restart the network service after boot....but it won't automatically come up when the computer starts.
I'm trying to configure internet access using KDE network manager. Added new VPN pptp connection, set gateway and other options but manager tries to connect for about a minute and breaks then. Here is /var/log/daemon.log
Code:
Jul 1 17:35:22 dvinokurov-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Jul 1 17:35:22 dvinokurov-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started
[Code]....
As I understand the main problem is in "(IP Config Get) timeout exceeded".
Configuration: Kubuntu 10.04 x86, VPN server with MSCHAPV2 auth, no compression, no encrypting.
how to configure an Ubuntu 10.10 server with a secured wireless network? I installed everything while it was wired, but I need to get it wireless. I downloaded the desktop to see if it could help me in configuring the wireless network, but it didn't help. how to configure wireless internet on an Ubuntu 10.10 Server in the terminal, which is preferred, or in the desktop.
When I type the command iwconfig, it shows eth1 being me wireless device. When I try and edit it, nothing changes! I don't know what I need to change other than the ESSID and the WEP key. I'm assuming I need to change the access point too, but it doesn't let me. Is there any specific order they must be changed in?
I created a VMware Workstation VM with OpenSUSE 11.2. When I copy the VM to a new location the network configuration disappears. If I go into the networking control panel and save, the interface names are changed. Originally had 2 nics as "eth0" and "eth1", copy the vm, configure network and the interfaces are now "eth2" and "eth3". How do I get back to my original configuration?
View 7 Replies View RelatedI have HPDX2480 computer system where i have installed RHEL4u5 having kernal 2.6.9-55. now how can i install and configure my NIC?
View 1 Replies View Related