Is it possible to limit maximum volume in PulseAudio? Currently, PulseAudio sets PCM channel too loud which results in distorted sound. I use aumix to turn volume down, but whenever any other sound is played (IM notification etc), PA plays with knobs, turning master volume down and PCM up. code...
I use OpenSUSE 11.2, pulseaudio 0.9.21, ALSA 1.0.21 and ALC889A sound codec.
I have some large volumes that I don't want to automatically be e2fsck'd when I reboot the server. Is it safe to change maximum mount count to -1 and check interval to 0 while a volume is mounted, or will that cause problems to the file system?
View 2 Replies View RelatedI am running Ubuntu 8.10 Intrepid. The only shortcoming for me is not being able to download audiobooks from my library. The OverDrive Media Console is required to download and play the audiobooks. I noticed that the OverDrive Media Console is now available for Android. So, my question is, if I download the Android SDK Emulator, would I be able to run the OverDrive app with the emulator? I have downloaded the Emulator, but I need to do so more reading to get it installed and running.
View 2 Replies View RelatedUbuntu Lucid, Asus T101MT tablet netbook.
Background Info: Normally the microphone doesn't work with some applications such as Empathy or the new Google Talk plugin for Linux. The workaround I'm using (and I don't know why this works) is to unlock the left and right channels in Pavucontrol and set one channel to zero, and to boost volume I set the other to max.
Issue: The Google Talk plugin is resetting the channels to be locked together. This is pretty frustrating because now they have free calling and I have no cell reception in my dorm room.
I was searching around and I stumbled upon a Linux Kernelix Sockets Local Denial of Service exploit.I downloaded the exploit, compiled it ran it to check if I am vulnerable.As I was expecting, the exploit instantly "killed" my Maverick system and I had to use the power button to reset my computer...Is there any way to limit the numberof allowed open sockets?I don't think that this can be done using /etc/security/limits.conf in a similar way of preventing the fork bombs
View 1 Replies View RelatedI've had nothing but trouble with Pulseaudio in Fedora 14. I had managed to get rid of it in Fedora 10 with the command: su -c "yum remove alsa-plugins-pulseaudio pulseaudio" I just don't want to have to deal with Pulseaudio anymore. It does not like my sound card and gets in the way. Is there a Linux distribution that does not use Pulseaudio ?
View 4 Replies View RelatedIn the sound preferences in Fedora 11, the sound can be set to 150%. I'd like to limit it to 100%.
The reason I ask is because MythTV likes to monopolize the system sound. It applies it's master volume setting to the system. The default setting is 70%, which is too quiet for me hear, but if I try setting it higher, it ends up putting the master sound over 100% which sounds like garbage. The volume also grows every time I change channels. So if it's at 110%, and I change channels it's at 120%.
Is there a way to keep volume at 100% or lower? Or at least limit MythTV?
I disabled pulse audio in favor of just working with jack, alsa_in & alsa_out and everything works pretty well except for one thing.
When I enable pulseaudio I can control the volume with my multimedia keys, volume up, volume down, mute.
If I kill pulseaudio not only do I not have volume controls but the little widget in the top bar seems to be broken.
I looked in my /etc/acpi/ folder and see these files relating to volume
/etc/acpi/volupbtn.sh
Code: Select all#!/bin/sh
test -f /usr/share/acpi-support/key-constants || exit 0
. /usr/share/acpi-support/key-constants
acpi_fakekey $KEY_VOLUMEUP
[Code] ....
running xev i get this output for those buttons:
Code: Select allFocusIn event, serial 36, synthetic NO, window 0x1e00001,
mode NotifyUngrab, detail NotifyAncestor
KeymapNotify event, serial 36, synthetic NO, window 0x0,
keys: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[Code] ....
nothing comes up for those keys, the terminal cursor just blinks.
also one more thing, those keys are set to shortcuts in the settings->keyboard->shortcut menu.
I can control my device with the amixer so I would like to just bind amixers functions to the keys but I don't really know how to go about doing that.
How can I bind amixers commands with those keys?
I'm using Mangler and WoW under Wine. Mangler is quiet, WoW is not. I would like to write a script to adjust the volume of my Wine application (set it to say 50%) and then launch Mangler. The CLI page on the PulseAudio wiki offers
Code: set-sink-volume/set-source-volume But I am apparently missing the part of how to apply that to an application. Update: Solved with update to 1.1.2010227
I'm having a problem with Pulseaudio for quite some time, I already made some topics about it. But still no solution. The thing is, I can't use my keyboard volume control, it's only manipulating my ALSA configuration. Not my main Pulseaudio volume. Here is some information about my sound card:
$ pacmd list-cards
Welcome to PulseAudio! Use "help" for usage information.
>>> 3 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 4
[Code].....
Whenever I play music tracks in totem Movie Player, the volume drops on each subsequent track - it's VERY annoying. Does anybody know of a permanent fix for this? I've gone through the steps on the pulseaudio thread, and they only fix the problem temporarily. I've even gone so far as uninstalling everything attached to pulseaudio (which was real fun btw since xorg and the video drivers apparently are dependent). After fixing that mess, the audio is STILL screwy. Never had this problem under F10 - do I need to go back?
View 2 Replies View RelatedI upgraded from 9.10 to 10.04 and my volume control disappeared from the panel. I have reinstalled pulseaudio but it had not re-appeared. I can't find it in the Add Panel list nor can I find it in the Pulseaudio volume control application as an option.
View 5 Replies View RelatedI've just upgraded to kUbuntu 10.04. I've been using Gnome for a few years now, and felt the need to try KDE again. I've managed to get my NVidia 8200 with HDMI audio working, but have one last annoying issue.
I can't control volume with my RF remote or keyboard.
More to the point, the keys control the sliders in kMix, but to no effect on the sound. This is likely because I need to use Pulseaudio to get my HDMI working. The sliders in Pulse volume control, control the volume nicely. Either I need a way to force kmix to talk to pulse, or a way to re-map these keys to control pulse.
What is the importance of 'module-volume-restore' in Pulseaudio configuration file(/etc/pulse/default.pa)? The Login sound on my Lucid desktop is very loud.Upon searching,i found that above(module) can be the cause of the problem.
View 3 Replies View RelatedI've got rhythmbox playing and to minimize the effect of the mic input being routed to the computer's main output, I wanted to set the main system volume to be fairly low and turn up the level in rhythmbox. Pulseaudio won't let me do that. If I change the computer's main volume, it changes rhythm box's volume, and vice versa. I don't think I saw that behavior before, no idea what changed.
Am I completely misunderstanding something? I thought the point of an audio server is so that the client applications could produce the signals in their own way and send them through the server. Why do they have to interfere with each other's settings? Is there some preference to make it stop doing that? I looked in pavucontrol, device chooser and manager, don't see anything.
I tried fixing m pulseaudio so it wouldnt mute the sound whenever i set it below 24%, but now i cant adjust the volume. Are there alternatives to pulseaudio? i have kmix installed, will this suffice?
View 1 Replies View RelatedHow to identify how large the home volume of users? I wanna know how large are the volumes of each users and I also want to limit one of the users. I just want him to have about 500mb. How to I do this?
View 3 Replies View RelatedIs there any way to have Volume Manager in systray without PA?
View 5 Replies View RelatedMy OS is Ubuntu 9.10 64bit. I have been having problems with audio in several of my applications - all of which were fixed by removing Pulseaudio and installing Esound. After uninstalling pulseaudio, there is now no volume bar in the notification applet on my desktop panel.
In addition to this, my volume keys on my keyboard (Lenovo Y550 Ideapad) no longer work. Is there an application I can install that will put a volume bar back on my notification panel (using Esound)?
i recently did a clean install of 10.10 to an old box i had so i could mess around with it and learn. however, all audio (and videos too) would stutter and play very quickly (a 1 minute videos video would play in about 45 seconds). so i followed the solution found here: [url]
this fixed the playback problems perfectly, however, i lost the volume control applet in the upper-right of the screen. reinstalling to volume control and then adding the "indicator applet" back to the panel adds a non-functional volume control icon and an additional mail icon.
Newer versions of both distributions are using the new pulseaudio volume control (I'm not referring to pavucontrol but the main volume control accessible via the volume icon in the panel). However, even though both distros' versions have the identical interface, they clearly do two different things. I've searched for this topic before and have come up with nothing; makes me wonder why no one else seems to have an issue with this.
For Fedora (12 and up) the main slider for the sound card's volume does just that, although the sliders for individual applications use the same "scale." If I drag an application's slider higher than that for the sound card, the "main" slider moves along with it.
In Ubuntu (Lucid and later) the main slider is the same as Fedora's, but the individual applications are scaled differently. Dragging an individual application's slider all the way to the right (100%) sets the maximum volume of this application to that of the sound card, whatever that happens to be at the moment.
In this respect, Ubuntu's individual sliders are relative to the (arbitrary) value set for the sound card, but Fedora's individual sliders are "hard-wired" to the main slider. I'm wondering if it is possible to make Fedora's volume control behave like Ubuntu's, i.e. is there a configuration setting, or is this designated in the source code? I'm sure there is a heated debate over why things are this way in Fedora, however with the new pulseaudio systems, the minimum value for the main slider for my sound card is pretty loud and this makes most audio unlistenable in Fedora, at least through headphones without an on-board volume control.
I'm having a problem all the sudden with amixer. set Master 5% used to control the pulse audio master volume. Suddenly, it will only raise and lower the headphone volume. Pulseaudio works, but I no longer have a master volume at all.
View 3 Replies View RelatedBecause of a horrible problem (volume bursting, this is known bug), I completely removed Pulseaudio and some related packages. So I'm now using pure ALSA, and it's working fine. Yet, the volume control tray icon was disappeared. How can I recover it?
View 9 Replies View RelatedFor awhile now, I've been trying to set two global hotkeys to control my volume level in Banshee. Before anyone comes in here and says to use the Volume Up/Volume Down keybinds in gnome-keybinding-properties, that does not work. That controls the master volume. I'm looking for a global hotkeys that control JUST the application volume.I've been playing around now, and I think I might have found a way. Since 9.10, Pulseaudio is integrated and the default sound manager. It also allows controlling the application volume level. While changing the volume would be through Pulseaudio and not in the specific application, this would work.
My question is if there's a way to set a keybind to control a specific application's volume within Pulseaudio? Or even a way to set a keybind to the event that happens when a specific application's volume is turned up or down within Pulseaudio.
I tried to finally set-up surround sound on my Ubuntu 10.04 machine and i was successful in doing so after a while of changing settings and tinkering. After doing so though, i was later in the day not able to get into the Pulseaudio Volume Control, therefore, everything is stuck where it is and i can't change anything. When i try to open Pulseaudio Volume Control i get the error message, Connection failed, Connection refused. My programs still play sound and i can control the sound of the programs through the programs, but i cant control the sound of the sorround sound now and my main sound bar only affects my stereo speakers, not the surround ones.
I believe this may have happened after the random disk check on restart, but i can't 100% confirm that and i'm not even sure if they are related. I still have sound, but i have no way to control the volume of my entire system at once. I did some looking around online and saw that others are having or had the same issue, and it was through different versions of Linux also. somehow reset everything so i can access PAVC and start over . I also tried steps listed in another thread here on the same topic, but they weren't working and it also seemed to be for older Ubuntu versions.
[Code]....
I'm rearranging a bunch of disks on my server at home and I find myself in the position of wanting to move a bunch of LVM logical volumes to another volume group. Is there a simple way to do this? I saw mention of a cplv command but this seems to be either old or not something that was ever available for linux.
View 2 Replies View Relatedmy secure log is flooding with these messages..
sudo: pam_limits(sudo:session): wrong limit value 'unlimited' for limit type 'hard'
Dec 28 22:42:29 yn54 sudo: pam_limits(sudo:session): wrong limit value 'unlimited' for limit type 'soft'
Dec 28 22:42:29 yn54 sudo: pam_limits(sudo:session): wrong limit value 'unlimited' for limit type 'hard'
I have a VPS server with 512 MB memory. The php.ini is set so script memory limit = 16 MB. However, I have noticed in my top report, instances like the following:
Quote:
5484 coldclim 25 0 46476 32m 5920 R 0.0 6.4 0:00.93 php
The bold number of 6.4 is the % of sever memory this process is using. 6.4 % of 512 MB of memory is about 32 MB of memory, so it appears that this isn't being limited by php.ini. Am I correct? This leads to the next question: Is there some way to limit the amount of memory a single suphp process can use? (Basically, something like the setting in php.ini which limits suphp processes in the same way.)
HP 210 Mini
Fedora 14 xfce
2.6.35.11-83.fc14.x86_64
I have inserted my handy drive. However, when I right click and select unmount I get the following message:
An application is preventing the volume "New Volume" from being unmounted
So I try from the command line:
umount /dev/sdb1
And I get the following message:
umount: /media/New Volume: device is busy.
All I have done is copied some files to my handy drive. So I am not sure what process is keeping my handy drive busy.Is there any command that I can use to see what process of anything else is using the handy drive?
In computer I have 2 sound devices.
When I run some program (let's say Skype) I can (using "pavucontrol" -> "PulseAudio Volume Control") setup so that this application will use given device for playback or recording.
But - in the Playback/Recording tabs application is visible only if it is currently doing something (playback or recording).
How can I set device per application, but before the application starts recording or playing sounds?
