General :: Set Device For Program In PulseAudio?
Aug 29, 2010
In computer I have 2 sound devices.
When I run some program (let's say Skype) I can (using "pavucontrol" -> "PulseAudio Volume Control") setup so that this application will use given device for playback or recording.
But - in the Playback/Recording tabs application is visible only if it is currently doing something (playback or recording).
How can I set device per application, but before the application starts recording or playing sounds?
View 2 Replies
ADVERTISEMENT
Jun 5, 2011
I would like to use HDMI on my graphic card for audio output. ALSA shows it as a card with 4 devices and I can get sound through one of them (the other three are different channels, perhaps? I have only stereo output connected). Although Pulseaudio has the right card set as default, it seems to me that it plays on a wrong device. Pacmd shows that the sink has parameter alsa.device set to the first device listed by ALSA, but I can get sound only from the second one.How can I force Pulseaudio to use another device of the same card as a default output?
View 2 Replies
View Related
May 22, 2011
I've had nothing but trouble with Pulseaudio in Fedora 14. I had managed to get rid of it in Fedora 10 with the command: su -c "yum remove alsa-plugins-pulseaudio pulseaudio" I just don't want to have to deal with Pulseaudio anymore. It does not like my sound card and gets in the way. Is there a Linux distribution that does not use Pulseaudio ?
View 4 Replies
View Related
May 31, 2010
I have a fedora13 version that upgraded mythtv to 0.23. Since that time, I've had sound problems. Mostly the sound has stopped working completely, but works with all other applications. Every once in a while the sound will work.
My sound device is ALSA:default and I have experimentally allow pulseaudio in my environment. This worked fine before the mythtv upgrade. I tried using the pulseaudio device in mythtv, but it works really poorly (lots of loud static).
View 4 Replies
View Related
Mar 13, 2010
I installed "Theocracy" on my 9.10 Karmic system. The installer asks for a sound device, dev/dsp is the default and I didn't change it. When I now try to start the game, I get the following error:
Unable to open sound device: Device or resource busy
Aborted
Execution of /usr/games/theocracy_base/theocracy.real failed!
What is the sound device when using PulseAudio on Karmic?
View 2 Replies
View Related
Feb 8, 2010
Based on my experience with external devices such as USB microphones and USB speakers, PulseAudio always defaults to the motherboard/built-in device rather than any USB device.My expectation is that if someone is using an external USB device to supplement what is on the motherboard/built-in, they are going to be doing that to overcome a limitation of the motherboard/built-in devices, and therefore it is logical that when external USB devices are present on a system, these be the default. (For example, I want sound from my beefy set of Logitech USB speakers and not from the tinny notebook speakers).
It is no problem for me to manually set/reset the active device, however I believe that the average user expects to plug in a USB microphone or speakers and assume that the system will automatically change the default. Furthermore without this action, some users not used to the Linux audio settings will be led to believe that the USB devices are not supported, when in fact it is simply a problem that they have not been selected for use rather than the motherboard/built-in devices.I think this warrants me entering a bug report, but I wanted to hear what others think before proceeding to enter a bug report.Is the default behavior of PulseAudio towards USB devices wrong? What do you think?
View 4 Replies
View Related
Aug 12, 2010
I am trying to setup a complex audio system, but I won't bore you with the details (unless you ask). Basically, I want to have pulseaudio only use one specific device and ignore the rest of the devices.
View 9 Replies
View Related
Jan 8, 2011
Is there any way to select which output device a program uses? I notice many Ubuntu programs lack the choice to choose where the sound is outputted, for example Rhythmbox and Exaile.I have 3 sound outputs (Internal, PCI, HDMI) connected and I'd like to for example use the PCI card as default audio device but play music from Rhythmbox through the internal motherboard output.
View 2 Replies
View Related
Oct 16, 2010
How do you go about getting the raw size of a block device under Linux from within a C program? And I mean the raw size of the block device itself, not a file system that may or may not be installed on it. And I'd like to be able to get the raw size of any block device, from hard drives (e.g., /dev/sda) to LVM partitions (/dev/mapper/vg0-home) to loop devices to anything else that is a Linux block device.
View 3 Replies
View Related
May 7, 2010
I need to auto-mount a storage device AND execute a program passing mount point path to it. How can i do this? I'd like to avoid polling for new storage devices. I'm looking for something like acpid for ACPI events, but working with storage plug events instead.
View 6 Replies
View Related
Aug 1, 2010
you have to read from many devices separate devices and make it look like a single one. It sounds very much like a device driver to me, perhaps... but getting my hands dirty with kernel code sounds like a daunting task for me that I've never done it...
View 2 Replies
View Related
Jul 30, 2010
Is there a way to bind specific programs to specific network devices (not IPs, since I have dynamic IPs)?
For example, I wish for irssi to route through eth0 and w3m to route through eth1. Keep in mind these devices have dynamic IPs, so I cannot attached them to an IP.
The solution cannot be accomplished through route since route pivots on IPs not devices.
View 1 Replies
View Related
Apr 27, 2011
i am trying learn to program linux kernel modules and smoothly transition in device driver programming. I have a year and a half worth of programming in C and have been using linux for years!! But my question is how do i compile a module? I got as far as coding it but am stuck as of now.
View 2 Replies
View Related
Nov 6, 2009
I plug a USB device, it gets a /dev entry, e.g. sdf, i mount its filesystem, then some program opens a file on this filesystem. I unplug this device, its /dev entry disappears, but if i replug this device again, it gets another name - sdg.
How can i force the program to close the file so the filesystem is ready to be unmounted without using "lazy unmount" to release the device name, BUT so that the program doesn't crash after trying to make I/O to this file, and, of course, without having to kill the program?
View 4 Replies
View Related
Aug 23, 2011
I've bought an X10 Home Automation USB interface: the CM15.
This is the information lsusb gives:
skerit@KIP-DU-SKER:~$ lsusb Bus 008 Device 002: ID 0bc7:0001 X10 Wireless Technology, Inc. ActiveHome (ACPI-compliant)
But this tells me nothing about where the device file is! How can I find that, or create one myself?
View 1 Replies
View Related
May 7, 2010
I am new to linux and am trying out script writing. I am using shell. How can I make a script to open a program then operate within that program?
View 5 Replies
View Related
May 11, 2010
Is it possible to limit maximum volume in PulseAudio? Currently, PulseAudio sets PCM channel too loud which results in distorted sound. I use aumix to turn volume down, but whenever any other sound is played (IM notification etc), PA plays with knobs, turning master volume down and PCM up. code...
I use OpenSUSE 11.2, pulseaudio 0.9.21, ALSA 1.0.21 and ALC889A sound codec.
View 1 Replies
View Related
Nov 2, 2010
I am running Ubuntu Netbook Remix 10.04. I have been having some problems recently with Pulseaudio, which has traditionally worked fine for me on this netbook actually. Specifically, when I boot the computer, the system will play the "Bongo roll" sound at the GNOME login screen, telling me that sound hardware has been detected and should be working fine.
Yet when I log into the Netbook interface, my volume notification icon has the three blank lines indicating my session does not have access to the sound hardware. Nor do any of the built-in Sound preference panels detect my hardware, only registering dummy output. Finally, the (hopefully) deprecated PulseAudio Device Manager and Volume Control applications also fail to detect my hardware.
However, this problem is inconsistent! It will only happen on certain boots, though the number seems to be hovering around 75% of boots where pulseaduio fails to load correctly. The daemon/service is running, and restarting it only returns:
jmmcl2@unteer:~$ sudo service pulseaudio restart PulseAudio configured for per-user sessions ask again, why is my Pulseaudio being so selective about detecting my sound hardware in Ubuntu 10.04?
View 1 Replies
View Related
Apr 30, 2011
I have tried a lot of distributions, and have been using Ubuntu for the last year or so. However I would really like to use a good KDE4 distribution. I do have some stringent requirements though.
1- Easy and quick to get it up and going.
2- It needs to use pulse (or at least very easy to add it and get it working). I know a lot of people don't like pulse, but I can't do what I need to do without it.
3- it needs to have a large repository (like ubuntu, debian, or any major distribution). It also has to have a good package management system, again like ubuntu, debian, but not like slackware.
4- I would like it to be easy to update to new versions. I don't care if it is a rolling release or not, but I don't want to have to install it all over again each year.
5- I want it to be a stable system, not too cutting edge, but also not too old.
6- It would be nice if it had multimedia codecs, etc included like mint. But it is ok as long as it is not too difficult to get them installed later.
[Code]....
View 8 Replies
View Related
Jan 18, 2011
I have installed arch linux and try to do pulseaudio according to wiki. But pulseaudio doesn't detect my sound card. I don't have alsa installed. I run
Code:
pacmd list
and it shows that no card is available. Commands
Code:
$ fuser -v /dev/snd/*
$ fuser -v /dev/dsp
View 3 Replies
View Related
Apr 30, 2010
I have a jsp code. After executing that code, a Java program should be executed without refreshing the page. that is, my first page is a login page which is in jsp. After logging in the next page must be displayed which is a Java code. is that possible? Can we use applet for that?
View 1 Replies
View Related
Mar 8, 2011
How do I create a program file for a new program?
View 1 Replies
View Related
Mar 17, 2011
I just compiled my first own kernel (I'm using Arch Linux), following the tutorial on the german site. Now I tried to boot it, I ended up failing with this message: Code: Waiting 10 seconds for device /dev/sda1 ... Root device '/dev/sda1' doesn't exist, Attempting to create it. ERROR: Unable to determine major/minor number of root device '/dev/sda1' Here is the important part of my menu.lst:
[Code]....
I simply copy&pasted the Arch-entry, i.e. I also had the disk by uuid there. The failure message was the same, just the root device name was the different name Also, at first I did not have the initrd line in my menu.lst (as written in my tutorial that I may not need it). In this case I had this error message:
[Code]....
View 10 Replies
View Related
May 15, 2011
Recently, I created a device sc0 through device mapper. The divice could be found in /dev/mapper/sc0. My problem is that the device doesn't exist in /dev/partitions which will block my following test.BTW, I found dm-0 in /dev/partitions. Is it the same as /dev/mapper/sc0? But the device /dev/dm-0 doesn't exist!
View 2 Replies
View Related
Apr 7, 2011
I am working on an embedded system, which is an USB MSC device that supports some vendor specific scsi commands. I am using FC10 laptop as USB host for testing, and it runs some small apps based on sg3. All has been well for ~ a week. The FC10 laptop is able to communicate with the device and retrieve data. Suddenly, starting from today, the laptop is not able to properly detect the device. When plugged-in, the MSC device is detected as input device (I thought). This is observed from "dmesg" output and changes in "/dev/input/".The device under development is running at full speed. When I connect to winXP, no problem. A windows file explorer pops up, showing the content of the drive.Also, the FC10 has no problem with other USB flash drive (high speed).
View 1 Replies
View Related
Apr 13, 2010
All my music editing software programs say, "unable to open device /dev/dsp.Device or resource busy." How can I fix this?
View 3 Replies
View Related
Jun 11, 2011
I rebooted my server and out of nowhere the RAID5 array won't assemble. I've tried everything I could think of to reassemble the thing. I fear that the array is ruined, but I can't imagine how. Here are various bits of information: The simplest failure (with and without partition numbers, which have not been needed in the past):
Code:
richard@nas:~$ sudo mdadm --assemble --verbose /dev/md0 /dev/sd[bcd]
mdadm: looking for devices for /dev/md0
mdadm: cannot open device /dev/sdb: Device or resource busy
[code]...
View 5 Replies
View Related
Mar 11, 2010
For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?
View 13 Replies
View Related
May 24, 2011
the message from dmesg for the IrDA device:
[ 3635.194162] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 3635.338159] usb 3-1: New USB device found, idVendor=066f, idProduct=4200
[ 3635.338165] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[code]...
View 1 Replies
View Related
Jan 7, 2010
here we have an older digicam (Jenoptik/Exakta Model "DC 22", if someone might want to know) that can be switched between some "PC Camera mode" and "Mass storage mode".Unfortunately, if attached to USB, it is always recognized as
Code:
UDEV [1262910483.475886] add /class/video4linux/video0 (video4linux)
lsusb tells:
[code]...
View 4 Replies
View Related
