I tried fixing m pulseaudio so it wouldnt mute the sound whenever i set it below 24%, but now i cant adjust the volume. Are there alternatives to pulseaudio? i have kmix installed, will this suffice?
Ever since upgrading to Karmic, I haven't been able to adjust master volume when my USB headphones are chosen as the output device. If I try to adjust my master volume (via the media keys on my keyboard or gnome-volume-control), the output volume doesn't change until it's entirely muted. I can adjust the master volume fine when I'm outputting through internal audio.I am able to adjust the volume fine on an application-specific basis, but this becomes quite a nuisance, especially when I switch between internal audio (where master volume is regulated) and USB audio (where master volume is always at full-blast). This worked fine in Jaunty, and stopped working once I updated to Karmic. My USB headphones are listed as "Storm HP-USB500 5.1 Headset".
since installing nVidia graphic drivers I can't adjust volume using volume button nor using volume keys. The volume icon has 3 horizontal lines like Ubuntu couldn't find audio device. Morover when I try to run pulseaudio there is "/home/chris is not ours" message.
Despite these facts audio is playing and I can adjust volume using alsamixer, but it is extremely not comfortable to enter console each time I want to volume up/down..
i'm using opensuse 11.3 64bits and upgraded kde from 4.4.4 to 4.6.0 now i'm having some problems with audio. it seems kde have problems with audio-devices. sometime i message about none workin devices and ask me to remove it. i manage to get sound from amarok, but not from web-browser lika videos. the computer is a dell latitude d830 with intel hda-devices. computer is docked in a dell d-dock. i can't adjust master volume using computer buttons or kde-volume, so i have to use volume on external speakers.
I upgraded from 9.10 to 10.04 and my volume control disappeared from the panel. I have reinstalled pulseaudio but it had not re-appeared. I can't find it in the Add Panel list nor can I find it in the Pulseaudio volume control application as an option.
I've just upgraded to kUbuntu 10.04. I've been using Gnome for a few years now, and felt the need to try KDE again. I've managed to get my NVidia 8200 with HDMI audio working, but have one last annoying issue.
I can't control volume with my RF remote or keyboard.
More to the point, the keys control the sliders in kMix, but to no effect on the sound. This is likely because I need to use Pulseaudio to get my HDMI working. The sliders in Pulse volume control, control the volume nicely. Either I need a way to force kmix to talk to pulse, or a way to re-map these keys to control pulse.
I've got rhythmbox playing and to minimize the effect of the mic input being routed to the computer's main output, I wanted to set the main system volume to be fairly low and turn up the level in rhythmbox. Pulseaudio won't let me do that. If I change the computer's main volume, it changes rhythm box's volume, and vice versa. I don't think I saw that behavior before, no idea what changed.
Am I completely misunderstanding something? I thought the point of an audio server is so that the client applications could produce the signals in their own way and send them through the server. Why do they have to interfere with each other's settings? Is there some preference to make it stop doing that? I looked in pavucontrol, device chooser and manager, don't see anything.
My OS is Ubuntu 9.10 64bit. I have been having problems with audio in several of my applications - all of which were fixed by removing Pulseaudio and installing Esound. After uninstalling pulseaudio, there is now no volume bar in the notification applet on my desktop panel.
In addition to this, my volume keys on my keyboard (Lenovo Y550 Ideapad) no longer work. Is there an application I can install that will put a volume bar back on my notification panel (using Esound)?
i recently did a clean install of 10.10 to an old box i had so i could mess around with it and learn. however, all audio (and videos too) would stutter and play very quickly (a 1 minute videos video would play in about 45 seconds). so i followed the solution found here: [url]
this fixed the playback problems perfectly, however, i lost the volume control applet in the upper-right of the screen. reinstalling to volume control and then adding the "indicator applet" back to the panel adds a non-functional volume control icon and an additional mail icon.
I'm having a problem with Pulseaudio for quite some time, I already made some topics about it. But still no solution. The thing is, I can't use my keyboard volume control, it's only manipulating my ALSA configuration. Not my main Pulseaudio volume. Here is some information about my sound card:
$ pacmd list-cards Welcome to PulseAudio! Use "help" for usage information. >>> 3 card(s) available. index: 0 name: <alsa_card.pci-0000_00_1b.0> driver: <module-alsa-card.c> owner module: 4 [Code].....
It seems that when I adjust the volume with the volume wheel on the side of my notebook, the OS messes up. Nothing is clickable, I cannot type anything, in order to get a working computer again I have to hard reset it.Why is this happening? I have never experienced this. I have a Toshiba Satellite that I recently installed Ubuntu on.
For awhile now, I've been trying to set two global hotkeys to control my volume level in Banshee. Before anyone comes in here and says to use the Volume Up/Volume Down keybinds in gnome-keybinding-properties, that does not work. That controls the master volume. I'm looking for a global hotkeys that control JUST the application volume.I've been playing around now, and I think I might have found a way. Since 9.10, Pulseaudio is integrated and the default sound manager. It also allows controlling the application volume level. While changing the volume would be through Pulseaudio and not in the specific application, this would work.
My question is if there's a way to set a keybind to control a specific application's volume within Pulseaudio? Or even a way to set a keybind to the event that happens when a specific application's volume is turned up or down within Pulseaudio.
I'm having a problem all the sudden with amixer. set Master 5% used to control the pulse audio master volume. Suddenly, it will only raise and lower the headphone volume. Pulseaudio works, but I no longer have a master volume at all.
I tried to finally set-up surround sound on my Ubuntu 10.04 machine and i was successful in doing so after a while of changing settings and tinkering. After doing so though, i was later in the day not able to get into the Pulseaudio Volume Control, therefore, everything is stuck where it is and i can't change anything. When i try to open Pulseaudio Volume Control i get the error message, Connection failed, Connection refused. My programs still play sound and i can control the sound of the programs through the programs, but i cant control the sound of the sorround sound now and my main sound bar only affects my stereo speakers, not the surround ones.
I believe this may have happened after the random disk check on restart, but i can't 100% confirm that and i'm not even sure if they are related. I still have sound, but i have no way to control the volume of my entire system at once. I did some looking around online and saw that others are having or had the same issue, and it was through different versions of Linux also. somehow reset everything so i can access PAVC and start over . I also tried steps listed in another thread here on the same topic, but they weren't working and it also seemed to be for older Ubuntu versions.
Since I installed Lucid, anytime I watch a video in Firefox I can't adjust the volume. I click on the little volume icon, and the volume meter pops up, but it won't let me change it.Also, I can't change to a different point in the video.And finally, it won't go full screen when I click on the fullscreen button.
I am not getting any sound with rythembox. My sound levels are mute with some of the bars in alsamixer. I do not know how to adjust the bars to unmute, or to raise the sound once unmuted.
I have recently installed ubuntu on a Dell Inspiron 8500. It works well but the startup volume on the ubuntu splash screen is extremely loud. How do I adjust this. System volume does not seem to help.
In xfce ,My keyboard for adjust volume don't work.I found in xfce--config--keyboard, there are settings to set globe hotkey.I try to add XF86AudioLowerVolume ,XF86AudioRaiseVolume and XF86AudioMute in this area,,but don't know which command should be.
I've just switched to slackware from opensuse (and before ubuntu) for few days. Everything is ok , no, is awesome when I was doing my job on run level 3. However, I found there was no sound when I booted it to run level 4 (xfce) trying to play some music on yesterday. After googled a lot, I thought there must be some wrong with my alsa driver, because I couldn't adjust the PCM volume from either alsamixer or amixer. In fact, there is even no PCM section in it, but two sections named "IEC958" and "IEC958 D" instead with no "pvolume" capability. Here is some outputs:
I'm using Mangler and WoW under Wine. Mangler is quiet, WoW is not. I would like to write a script to adjust the volume of my Wine application (set it to say 50%) and then launch Mangler. The CLI page on the PulseAudio wiki offers
Code: set-sink-volume/set-source-volume But I am apparently missing the part of how to apply that to an application. Update: Solved with update to 1.1.2010227
I've had this problem since I fresh installed Fedora on my laptop: I can play sounds fine, but I can't mute/make it louder or softer. I couple days ago (right after I installed) there was a notification saying there was an error with something in the sound and it was "falling back to default". Recently, the notification stopped popping up but the problem persists.
I'm not 100% positive as to what type of speakers my laptop has. I know they're made by JBL, but on Windows they're handled by "RealTek HD Audio Manager" and in Device Manager there's 2 different audio devices: Realtek High Definition Audio and ATI HDMI Audio. Neither of them say they're JBL brand. The most information I can get out of the specs of my laptop found on Newegg is that they're "JBL stereo speakers (1.5 watt x 2)".
What is the importance of 'module-volume-restore' in Pulseaudio configuration file(/etc/pulse/default.pa)? The Login sound on my Lucid desktop is very loud.Upon searching,i found that above(module) can be the cause of the problem.
Newer versions of both distributions are using the new pulseaudio volume control (I'm not referring to pavucontrol but the main volume control accessible via the volume icon in the panel). However, even though both distros' versions have the identical interface, they clearly do two different things. I've searched for this topic before and have come up with nothing; makes me wonder why no one else seems to have an issue with this.
For Fedora (12 and up) the main slider for the sound card's volume does just that, although the sliders for individual applications use the same "scale." If I drag an application's slider higher than that for the sound card, the "main" slider moves along with it.
In Ubuntu (Lucid and later) the main slider is the same as Fedora's, but the individual applications are scaled differently. Dragging an individual application's slider all the way to the right (100%) sets the maximum volume of this application to that of the sound card, whatever that happens to be at the moment.
In this respect, Ubuntu's individual sliders are relative to the (arbitrary) value set for the sound card, but Fedora's individual sliders are "hard-wired" to the main slider. I'm wondering if it is possible to make Fedora's volume control behave like Ubuntu's, i.e. is there a configuration setting, or is this designated in the source code? I'm sure there is a heated debate over why things are this way in Fedora, however with the new pulseaudio systems, the minimum value for the main slider for my sound card is pretty loud and this makes most audio unlistenable in Fedora, at least through headphones without an on-board volume control.
Whenever I play music tracks in totem Movie Player, the volume drops on each subsequent track - it's VERY annoying. Does anybody know of a permanent fix for this? I've gone through the steps on the pulseaudio thread, and they only fix the problem temporarily. I've even gone so far as uninstalling everything attached to pulseaudio (which was real fun btw since xorg and the video drivers apparently are dependent). After fixing that mess, the audio is STILL screwy. Never had this problem under F10 - do I need to go back?
Is it possible to limit maximum volume in PulseAudio? Currently, PulseAudio sets PCM channel too loud which results in distorted sound. I use aumix to turn volume down, but whenever any other sound is played (IM notification etc), PA plays with knobs, turning master volume down and PCM up. code...
I use OpenSUSE 11.2, pulseaudio 0.9.21, ALSA 1.0.21 and ALC889A sound codec.
Because of a horrible problem (volume bursting, this is known bug), I completely removed Pulseaudio and some related packages. So I'm now using pure ALSA, and it's working fine. Yet, the volume control tray icon was disappeared. How can I recover it?
I need to replace a disk from a veritas mirrored volume, I can not delete the disk from the diskgroup as the disk is using by other volumes in the same group. so, how can i remove the disk from my mirrored volume and can replace another disk.