I can't capture sound in aMSN instant messenger.
I'm tried to test sound capture in sound preference but it has no sound(Beep).
Mainboard AliveNF6G
audio Chip: Realtek ALC888
i'm changed to PulseAudio but not work.
anyone can help me? or have the other idea.
See this figure => http://www.guitarthai.com/picpost/gt...t/A1062340.jpg
Thanks so much for your help.
to use google mail account to login Empathy, but I cannot get it connected on line.Should I use System->Administration->Firewall and check some service?If so, which service of System->Administration->Firewall should I check?
View 2 Replies View RelatedIs there an instant messenger client that has microphone support for AIM?
I've searched Google for like 2 hours and didn't find anything.
Thanks.
I'm new to Debian, but have used Ubuntu so I'm relatively familiar with APT. Ubuntu doesn't have backports, though, and I can't figure this out. I've checked the documentation for the answer, and I'm hoping that I'm just overlooking something simple.
I'm running lenny, and I want to install the Empathy instant messenger that's in lenny-backports (v. 2.26.2-1). I already have the stable package installed, and here's what happens when I try to upgrade:
michael@archimedes:~$ sudo apt-get -t lenny-backports install empathy
Reading package lists... Done
Building dependency tree
Reading state information... Done
empathy is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 118 not upgraded.
[Code]...
My laptop is dell vostro 3500, I am using ubuntu 10.10 marvic amd64 operating system.I have installed empathy instant messenger. And I added yahoo chat. from that yahoo account I want use the audio/video call. But I was unable use that feature.
View 8 Replies View RelatedMy laptop is dell vostro 3500, I am using ubuntu 10.10 marvic amd64 operating system. I have installed empathy instant messenger. And I added yahoo chat. from that yahoo account I want use the audio/video call. But I was unable use that feature.
View 1 Replies View RelatedLooking for some advice and guidance please? Which free Instant Messaging server & Email server is best for SUSE 11.4?I have an office with a mix of approx 20+ Windows 7, Macs desktops, and we want to bring our email and instant messaging services/solution in house.Im technical, so am not afraid to dive in feet first, but being relatively new to Linux can anyone advise a good free product(s) which would work in this kind of setup bearing in mind the windows and mac desktops need compatible clients?
View 1 Replies View RelatedSorry for harping on, but aMSN used to have sounds in Fedora. Is there something I need to enable in openSUSE?
View 3 Replies View RelatedCan someone tell me where I can find additional emotional icons to AMSN. I have a client that wants additional emotional icons.
View 1 Replies View RelatedI'm trying to login in aMSN, i write my e-mail address and password then i press enter it shows (loggin In) but aMSN does'nt come on line.
View 3 Replies View RelatedI am unable to capture sound from the sound card. I used to be able to do this with ease in SuSE 10.0 and 11.2. Now I have 11.4 and not only do I NOT have access to the sound card's channels (for base, treble, turning the mic on/off, and line in, Analog Capture Boost, etc) but now I can't seem to get at the settings for capturing sound coming from the sound card. I have tried using the Alsa mixer by way of the terminal and went to the Capture section and turned all of the settings all the way up. I didn't see any settings for Capture Boost as was available with 11.2's Alsa mixer GUI. Here's more of my info:
[Code]...
Isn't there ANY GUI sound mixer available that will give me access to all the channels I require? I not only record sound from my sound card, but I also use my mic at times for Skype and I like to be able to turn it off when not in use, rather than unplugging it all the time. I used to be able to do this with 11.2 and 10.0 and I really liked it that way. BTW, the plug for the mic is in the back of the computer and it's not convenient to have to plug/unplug it from there each time. For some apps, it's just a good thing to have all the sound settings done and in place before starting up the app. This I cannot do right now because of the changes to KMix and the Alsa GUI. I really really don't like this at all.
I recently converted an amd 64 bit WINdows machine to Lucid 64 bit. Everything has gone well. I had numerous issues with Pulseaudio that I removed it. Sound with Alsa has been great, including system theme sounds. I can record via a mike as well. What I cannot do is to capture sounds coming through the sound card. When I record I am getting empty files. The mixer indicates that there are two capture devices. Here is some data on my audio card.
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog
[ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital
[ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI
HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
I'm trying to capture my desktop sound (Video too, but that part's working) but nothing I try works. I've tried various programmes, none of them work. I tried various things I read on different websites, and nothing worked. I noticed /dev/dsp was missing, and put it back by a guide, but that made no difference and disappeared again now I rebooted anyway
View 5 Replies View RelatedI'm trying to make changes to my system to be able to capture sound. I've found the directions to make the tweak permanent (from here: http://forums.opensuse.org/english/g...ml#post2342948 and here: http://www.linuxquestions.org/questi...evices-877614/) but I need to know about one thing: What does latency_msec=5 mean? Do you need it for your average capturing of sound from your sound card?
View 2 Replies View RelatedI have installed XVidCap Screen Capture. If I record my screen with XVid Cap Screen Capture there is no sound. But if I record with Desktop Recorder there is sound. What is wrong?
View 9 Replies View RelatedI have been searching for an answer through most of the recent posts about sound issues but have not been able to find a solution. I am currently unable to capture sound from the "Line" input on my sound card. I do have sound and is working correctly for all applications and I do have P/A disabled (I'm not a huge fan of the sound quality with P/A enabled). I have checked and re-checked many settings but to no avail have not been able to capture sound. I'm sure I may be missing something or have not done something in order for this to work. I was using openSUSE 11.4 on a different pc and had no problems, unfortunately this is a different pc with a different sound card which is on-board so I am not entirely familiar with it yet.
It is a C-media CMI9880 which shows up as a Intel HDA (ICH6) and appears to be configured correctly.
I have a problem with trying to capture sound through the input jacks on my computer. The sound plays through from the inputs to the output, and it's volume is controlled by alsa mixer, but no programs can pick up the stream, including the PulseAudio and Gnome Volume controls.I have tried many of the suggestions to be found in these forums for sound issues, including removing Pulse, configuring the model in alsa-base.conf, and messing with every setting I can find.Here are the outputs from the commands from the troubleshooting guides:
Code:
lspci -v | less
00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio
[code]....
SOUND from analog Capture is out of sync in Pinnacle Studio 14.
[code]...
This problem can occur during capture from an analog capture card if CPU utilization exceeds 95 percent. To avoid this problem, configure virtual memory to be "System managed" by following these steps:
1. Choose Start -> Control Panel.
2. Open the System control panel.
3. Click the Advanced tab.
4. Click the Advanced tab.
5. In the Virtual memory box, click Change.
6. Select System managed size, and click Set.
7. Click OK.
i am working on a model based on cpu load / cpu usages. where i need the instant cpu usage/cpu load, but i can able to find the cpu load average for last 1 , 5 or 15 minutes. Is there any command or any software by which i can able to find out that?
View 2 Replies View RelatedWhat is the best analogue capture program please to capture Austar.
View 1 Replies View RelatedOnce I open my messenger window and its time for me to log in I have my yahoo account ready to go so I key in my password and it never lets me log in. This suddenly started happening. However if I was to log in with an AOL account I can still log in. What can I do to solve this? I am assuming that somehow the system locked or disable my yahoo account from logging in.
View 3 Replies View RelatedI am using Fedora10.I have installed g2ipmsg using "g2ipmsg-0.9.6.tar.gz".The installation was successful.But when I execute it I cannot see any other user in the users list inside g2ipmsg , other than myself (It uses the 'lo' and not 'eth0').Messaging with myself is successful.ipmsg.exe works well in Windows , I don't have to make any settings there.Here in Linux I made the settings as:settings->preferences->External representation of IPMSG character code to 'GBK'.
also when I run the application following things are printed:
root@nameserver# g2ipmsg
Error : [fileubcrypt.c line:1307 ] Can not store key: length: 0
[code]....
I would like to be able to use Yahoo Messenger in Fedora 13. Has anyone been able to do this.
BTW. Fedora 13 is the best OS yet. I only needs a couple more programs to really rock.
1: A DVD Player
2: A MP3 Player
I would use it as my main OS if I could watch DVDs and play MP3s
If you want to install rediff bol (messenger) in Ubuntu first you have to install Wine. Installation of wine software in two way. First way through the command line second way through the Ubuntu software center In first way you go to applications---> accessories ---> Terminal and type sudo apt-get install wine after installation complete you should install Microsoft's True Type fonts: sudo apt-get install msttcorefonts in the second way you go to applications ---> Ubuntu software center ---> in search box type wine It will show Wine Microsoft Windows Compatibility Layer (Beta Release) Wine Microsoft Windows Compatibility Layer Q4Wine (GUI configuration tool for wine) in this you should install Q4wine (GUI configuration tool for wine) install first second you install Wine Microsoft Windows Compatibility Layer (Beta Release)
after that you install Wine Microsoft Windows Compatibility Layer after installing you download Rediff Bol 8.0 Messenger.exe from [URL]... after download is completed you go to places ---> download and copy Rediff Bol 8.0 Messenger.exe and past it Desk top now Right click on Rediff Bol 8.0.exe and open with Q4wine after open you will see one box that is Run Program and press OK button now you will see a new box Q4Wine:. Qt4 for Wine v0.118 now you will press Default place It will open Rediff installation box.............
How Can I install Windows Live Messenger on Ubuntu 10.04
View 4 Replies View RelatedI have configured squid 2.5 stable 6. I can browse any website. I can even use msn messenger but I cannot use yahoo messenger. I have also set the http proxy settings in preference for yahoo messenger but still it does not sign in.
View 6 Replies View RelatedWhen I talk to anybody on Skype, the sound is really slow, it sounds like I am a robot. Its running at maybe 1/2 normal speed. I am using Xine backend and internal microphone.
[Code]....
i have configured squid proxy but i cannot install or update yahoo messenger and cannot even update antivirus with squid proxy running. here's the error log when trying to install ym: TCP_DENIED/403 642 GET http://c-ymsgr1100_2009_usexe.a-ymes...0_2009_us.exe? - NONE/- text/html and also, i cannot attache files in yahoo messenger for behind the proxy.
View 2 Replies View RelatedI'm using fedora8.I installed spark on my machine,when i launch that through terminal,it is opening perfectly.But when i open application launcher or creating custom application on panel it was not working.All other shortcuts like,thunderbird,firefox are opening except spark.
View 1 Replies View RelatedI installed amsn from SVN, I had gnutls and libv4l with its devel packages installed at compile time, and after I installed it I set amsn to msnp18 via amsn's console to enable the experimental video conferencing.
My issue is when I go to configure A/V, farsight2 throws this error when amsn checks for farsight2
Code:
I believe I have all the dependencies as listed on this page [url]
Perhaps I missed something when translating the ubuntu-named farsight dependencies to fedora's equivalent? Anybody see a solution to this?
I am using Fedora 13 64-bit, the system is up to date.