General :: Use A Distribution On A USB To Repair A Windows Registry?
Jan 15, 2009
Would it be possible to use a Linux Distribution on a USB to repair a windows registry problem, or to use Linux to change some files in the Restore files? If so can anyone recommend a version? I have a laptop running windows Xp that has no cd drive, keyboard, or mouse function due to a registry error. I have a good restore point with the correct registry entries that I could change if it would be possible to boot from a USB version of Linux.
I love how in Linux you can link to folders. get Windows XP to change where My Videos, My Music and My Pictures folders are pointing to, to make them act like Linux symlinks?Is there some way to get the same functionality in Windows XP, maybe by editing the Registry.
It's been weeks since I've logged into Windows but to test a eth0 card issue I now want to see if it works in Win7 and lo and behold, I can't for the life of me remember my Windoze password.I see lots of references to using specially created iso files to gain access to edit the registry, but I am wondering if anyone knows the commands I would need (from the command prompt of my F13 install dvd, rescue mode) to access the registry and what section I would need to change.I am guessing that I can do this from the command line without needing to download a special iso that (for all I know) could have any number of malware on it.I know this is not exactly the place to ask for a Windows registry edit walkthrough, but I figure some of you out there might have done this yourselves.
I have a PC with Windows installed.I have a usb pen drive.I am able to use that pen drive on Windows.I have no "boot from USB" option on my bios.Is there any linux distribution available,whose iso image can be downloaded and saved in pen drive,and open the pen drive from inside windows,and start installing linux distribution to my PC from there?This means I want to install linux without using a bootable device.Is there any way exist?Here I want to know if any linux distribution with such facility is available so that I can load it on my PC without any bootable device.
I had previously installed windows xp. Then I installed ubuntu and dual booting was fine. Now my windows is corrupted. I need to either repair or reinstall it, and I think my mbr will be affected. I will test all this on vmware first.
What I'm looking to do is to use Linux to help me remove malware and etc. from any Windows based computer. We are currently using 32-bit Dell computers with Windows XP SP3. New computer orders are 64-bit Windows 7. Previously, I have used Ghost to create images, but it is getting harder to have all the different images saved and other criterias. My plan is to create an USB Linux boot with the Windows software to remove malware, trojans and all the others. I currently have an 8Gb USB flash drive to use for this project. I was looking at Puppy Linux, but I think there is something messing whether it be with puppy or me. I am not limiting myself to just this project. This just happens to be one selected and approved by my bosses. Since we are using both platforms in this school district -- Macs and PCs. Eventually, I should be able to use my laptop with at least a dual boot environment.
I would like to install a program (R for statistical computing). I am using Slackware. On the download page of R (The Comprehensive R Archive Network) there are options to download the code for Debian, Redhat, Suse, and Ubuntu. Which one should I download in my case (using Slackware)? Is there any of them which I should not download?
i know i asked earlier but i got my usb to be mounted on a different fedora distro. how do i now find my documents or repair it? also how do i add in a repair line if possible?
I had an dualboot problem, after updating ubuntu to 10.04 my windows vista option in the grub of ubuntu was gone.Now I have installed windows 7.And the grub does not appear again, there is no grub at all.Now sombody told me I could fix or repair the boot record in windows 7.Does somone know how I can repair the grub in which I can choose between windows 7 and Ubuntu?
This post is a follow up to this one: [URL] My computer is an IBM R52 running Windows Professional (previously dual-booting with Ubuntu 10.10, but that's gone now, and I don't dare reinstall it until the HDD partitions and mbr are properly working again). I think that the shred command mentioned there simply messed up my MBR, and maybe my partition table. Here's the partitions on my HDD:
My question is, is it safe to use something like SuperGrub to repair the MBR? I really don't want to mess up the Windows and recovery partitions. I've done plenty of research on this, but am not confident until someone says that it works in my case.
I just used the repair tool (automatic) after doing a clean install of Suse and my Windows directory has disappeared altogether. Any chance of getting it back?
Here's the readout: Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x6eb5ef98
Device Boot Start End Blocks Id System /dev/sdb1 1 31481 252864504 7 HPFS/NTFS /dev/sdb2 * 31482 60482 232950532+ f W95 Ext'd (LBA) /dev/sdb3 60483 60802 2560000 7 HPFS/NTFS /dev/sdb5 31482 31743 2104483+ 82 Linux swap / Solaris /dev/sdb6 31744 34354 20972826 83 Linux /dev/sdb7 34355 60482 209873128+ 83 Linux
I was follooing this instructions to repair windows system32 in this tutorial found in a previus tread, my laptop is Dell xps 2010 I had Ubuntu Live cd running with Internet,mouse and keyboard, The NTFS and NTFSProgs exist in System/ administration /synatip Package Manager,but i can mount the filesystem properly due the device name etc,thing i missing some code in terminal application.Partition table entries are not in disk order.Regard the repair of windows media center edition (windows system32 corrupted...).
I initially had a dual boot where I could decide to either boot into Windows 7 or Ubuntu 10.04. It work seamlessly. At some point, however, when I booted into Windows, it just seem to only load it "half" in the sense that the desktop just turned black (but when ctrl-alt-del was hit I did receive a screen with the different options).
I suspected there was a problem with grub and proceeded to restore the Windows bootloader by booting into the Windows CD and repairing the computer by entering the commands:
After restarting I suddenly do not have the option to boot into Ubuntu (where did it go?) and booting automatically into Windows the original problem persists.
Any idea what happened here and how I can restore things?
I am comparing jwhois and whois. Specifically, I want to resolve the country and Internet registry source for 150.216.2.252. The correct information is United States and ARIN; however, using the whois command it says it is in Australia and APINC. This is incorrect. I have compiled jwhois; however, it will not work on ip address. It will resolve cnn.com and other websites; however, will not work on ip address such as 150.216.2.252. When I try to use an IP address it says:
jwhois-4.0$ jwhois 207.58.150.216 [Querying whois.arin.net] [Unable to connect to remote host]
How can I get jwhois to work on this ip address or whois to resolve the correct United States information?
I'm so used to Windows having to run multiple malware scans with multiple tools. Running registry cleaners and running CCleaner to remove all of the old temp files, cookies etc.. Derfagging. Ok with Ubuntu no more malware scans. No more registry scans. It appears that there isn't a defrag tool? And what about the other things that tend to clog up the works, Temp files , cookies etc. Is that what the disc janitor is all about?
Trying to figure out GIMP plugins. My version of GIMP (2.6.6) shows Despeckle as grayed out. Going online, Despeckle does not appear in the GIMP Plug-In Registry. I'm on dial-up at home, which of course makes everything infinitely harder. Plus I'm not very familiar with GIMP plugins. Anyone know what's going on with Despeckle? I'm picking up a couple of old SCSI Nikon Coolscans and would like to see how hard it's going to be to run them with Ubuntu. Can use Windows for the scanning work but it'd be fun to use Ubuntu.
so in Windows I remember I could add to the registry under the * folder in classes_root under Shell, I could add any command I wanted. That way no matter what file I right clicked on I could have EDIT or OPEN with that file.
Is there a way to add this to the gnome right click menu? A default always there for all filetypes? I have UltraEdit Linux installed and want to have the same functionality I had when I used to use windows.
So I install Ubuntu 10.10 on a multi-drive, dual boot with windows 7 computer. At almost the end of the install, I see "running grub-install sda" or whatever it is. sda is my windows drive.So rather than asking where to install the bootloader or give you the option like it used to, it just did it to my "first" drive.
What the hell? Now my Windows MBR is gone. I like to maintain that so if my linux drive dies I can still boot into windows via the old windows boot loader.Possible to move Grub2 to my other drive and repair windows 7 drive MBR?
Does Linux have a "repair internet connection" function? Every so often, particularly after using the hibernate function, I cannot open any webpages, etc. - not really sure what causes the problem.
What does "distribution" mean? My Acer computer, on which I have linux linpus lite, comes with very little documentation and while I have a physics BA and have had exposure to technology, my knowledge of linux is just about zip. Is there a good place to start? As you can see, this question about the word "distribution" is a razor thin top of an enormous iceberg of ignorance.
I had a hard time deleting Wubi from Windows 7.To make sure it all got off, I want to manually check and delete anything Ubuntu and/or Wubi related from my registry, since I did a full install
I need a 64-bit Linux distribution to beta test TeraChem, a GPU-based quantum chemistry package. I have never personally used Linux, however, and I don't know anything about the available distributions. I was wondering if I could get some recommendations.
My system specifications:
CPU: Xeon W3520 GPU: NVIDIA GTX 275 Motherboard: GIGABYTE EX-58 UD5 Current OS: Windows 7 64-bit
I would not use Linux as my sole OS but would want to dual-partition (I think that is the term?). However, I think I would end up using the distribution for more than just running TeraChem. I may even become a convert!
What am I looking for in a distribution? Ease of use, efficiency, 64-bit. What do I know how to do? I can build computers, code in C++, comfortably use a command line.
I would like to make my own Linux distribution.Where do I find a Linux distribution that has just the OS, a browser and basic drivers for ethernet, video, etc.I can then build it up myself through the repo.
what distribution has the most software with it ? I mean one that come with many cds of software that get all install at once while the first install. I heard about this a while back but I can't remember the name of it, I think it was mandrivia. A free one but I am curious for the other one that cost money.
