I am searching for Internet access manager, i am using limited Broadband Connection, in my plan daily from (2 am to 8am ) i can download free. I am in need of a software to schedule my Internet connection only at particular time for example from( 2 am to 8 am) daily.
I am using Ubuntu 10.04.
If any one could guide me how to connect Internet only at particular time. I am using DSL connection.
I have a linux box (fedora) with two ethernet cards eth1 and eth2. On eth1 I successfully configured a PPPOE internet connection. Such that from the server I can browse the internet. On eth2 I wired it to a wireless router essentially to provide the wireless cloud. On eth2 I also configured dhcp, such that the Linux box is both PPPOE and DHCP server.However my clients on the LAN cannot access the Internet.
On passing the routing command I get
Destination Gateway Iface
196.44.x.y 0.0.0.0 ppp0
192.168.1.0 0.0.0.0 eth2 (my subnet)
0.0.0.0 0.0.0.0 ppp0.
The router (functioning as a wireless access point mainly) has a fixed IP address of 192.168.1.2 and eth2 has IP address 192.168.1.1. The dhcp file running on Linux has been set with option router (Gateway) 192.168.1.1. I cannot figure out how to correctly set the routing table such that my clients on wireless can access the internet cloud. I googled and googled but no solid solution. Any suggestions?
I'm trying to configure internet access using KDE network manager. Added new VPN pptp connection, set gateway and other options but manager tries to connect for about a minute and breaks then. Here is /var/log/daemon.log
Code:
Jul 1 17:35:22 dvinokurov-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Jul 1 17:35:22 dvinokurov-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started
[Code]....
As I understand the main problem is in "(IP Config Get) timeout exceeded".
Configuration: Kubuntu 10.04 x86, VPN server with MSCHAPV2 auth, no compression, no encrypting.
Which download manager i can use for linux and how...kindly let me know can i use windows download manager such as DAP or internet download manager with wine in linux...
View 1 Replies View Relatedwhen i try to access synaptic package manager and update manager or ububtu software center. the screen will flash and be gone
View 7 Replies View RelatedCan u tell me any download manager for linux mint 9.
View 3 Replies View Relatedeverything works good in windows environment. still in ubuntu 9.1 which i am using , cannot access internet using connection manager
View 4 Replies View RelatedI can not access internet with Linux. I enter password which I use for windows.
View 5 Replies View RelatedOpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
I am completely new to linux an have read the replies to similar questions but am unsure of how to access the directory mentioned ~/.gconf/system/networking .I also do not have a system recovery disc or flash drive
View 7 Replies View RelatedI changed my ISP recently, post which my LAN is not able to access the internet.I have 6 PCs in my LAN which run on Ubuntu 9.04 and 1 on Ubuntu 9.10 and one more on WindowsXP and these are connected to an Ubuntu 9.04 where the ISP pipe is terminated. The main PC is able to access internet and has IP of 192.168.1.xx series on eth1 on DHCP and eth0 is configured as 192.168.0.2
View 14 Replies View RelatedI am trying to access my Red Hat server (home server) from my an external location. I followed the step on how to port forward but I'm having no success. I was wondering if there is something I should be doing on my linux server to all the remote access.
Should I be using vnc?
So this has been going on for weeks now. Usually doesnt happen till friday-saturday. My internet breaks down on slackware, im able to play an online video game, and sometimes if i'm lucky, use pidgin to get on Gchat. However other than that, I cannot access the internet. I've tried multiple browsers, resetting my router, and resetting my modem. It's connected through an ethernet cord, and I am getting an IP from my router.
My first thought was that it was a bandwidth limit, but I'm at my house, on a windows computer typing this right now. I'm not an expert on bandwidth caps so maybe it is this. The weird thing is,I have a laptop running slackware as well. Even over wireless it doesnt work.
I am in a pvt n/w 192.168.0.0/24 and my friend is is another n/w 192.168.1.0/24 . He is in another location. Can I access his machine through vnc over internet ? I have centos 5 and he has suse 10.
View 1 Replies View RelatedI am a user or consumer of Knoppix 5.1 and Knoppix 6.2, I see in 6.2 version a very usefully tool, an icon in task bar thats help my internet connection in auto, even if I use a mobile modem like Huawei E160, I only select a 'Auto Mobile Broadband (GSM) connection' and, voila, internet is active. Into version 5.1 don't exist this option. I need to find packages like network-manager.... and all relatives and install in 5.1 in correct order to success.
I am running qemu version 0.13 on windows XP. My Host OS is Windows XP and my guest OS is Debian 4(Etch). How do I connect to internet from Debian OS? My windows OS can connect to Internet. The following is the launching command which I am using now to launch qemu in windows XP.
qemuqemu.exe -L "qemu" -boot c -hda "debian4.img" -m 512 -localtime -ctrl-grab -usb -net nic,model=ne2k_pci,macaddr=52:54:00:12:34:56 -net user -redir udp:161::161 -redir tcp:4440::22
When powering up with Linux, I get the message "THERE WAS AN ERROR CREATING THE CHILD PROCESS FOR THIS TERMINAL".I posted this on Newbies several months ago but received no replies. I hope this is the correct forum.I am using Windows XP Pro at the present.
View 3 Replies View Relatedi am unable to access internet in linux editions (redhat 5.4 & centos 5.5) recently i have taken a reliance internet connection but the think is i didn't get any ipaddress from reliance, but i accessing internet in window 7 and i have triple boot. pls any one give the solution.
View 3 Replies View RelatedMy wireless card: TP-LINK 322G + I ask, after the installation is complete debian5.04, how to configure wireless Internet access,
lspci entry:
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
[Code]...
I have an acer aspire one notebook (I gather firefox 2 is interwoven on the system?). Anyway, keep pressing firefox icon and it churns over put nothing happens. I found the following advice on another site: (Sorry this is so long, but I wanted to give you as much info for you to help me)
Press Alt+F2 to show the Run program window. Check Run in terminal, leave the input field blank, and click Run to open a terminal. If you're not familiar with the Linux command line just follow the instructions step by step. The easiest way is to simply paste the commands into the terminal with Ctrl+Shift+V. Most of them will only give feedback if an error occurs.
The first command uses wget to download Firefox 3.6 from an official mirror. You can edit the lang variable at the end, in this case en-US, if you'd like another language. All available languages are listed here, just hover over the download link to get the language code from the status bar.
wget -N [url]
The next step extracts the just downloaded file and modifies a link to point to it. In a few cases a connection refused error message may be triggered by sudo, which is not an error but a bug in sudo and can be safely ignored.
The next step links all plug-ins (not to be confused with extensions) to it.
Launch the profile manager using the command below. Create a new profile, name it anything you like and select it. If you want to keep your bookmarks export them via the bookmark manager first. You can then delete the old default profile.
firefox -profilemanager -no-remote
As a bonus you can also change the icon to the official Firefox icon.
Finally reboot the AA1 to make the desktop aware of the new icon and browser location.
However when I try the above I get the following responses at each point:
I do now have a new icon on the desktop! but still no internet.
I have installed Mint 8 on my HP Presario lap top. When booted up using XP I can connect to the internet wirelessly with no problem. But, when I boot up with Mint 8 I receive a msg that there is no connection to the internet. I then tried by hooking up to the router with a cable and it still shows "not connected to the internet" msg. I tried rebooting while hooked up with the cable and same result.
View 20 Replies View RelatedI have just upgraded my system from fedora9 to fedora11.IN 9 i didnt hav any problem in accessing internet from firefox.but here in fedora11 firefox is not working .firefox cannot establish a connection to the server.i have tried to fix the problem by disabling firewall and proxy.but still im having the same problem..
View 8 Replies View RelatedI am using internet web control through squid... All is working fine only some little bit issues.
(1) Sometime when i tried to open google.com or any site I got message (The requested URL could not be retrieved) Screen Shot Attached.) but again after sometimes same websites will open.
url
(2) I would like to block word 'sex'.. So I have edit squid.conf with the following acl
acl Blockword url_regex sex
http_access deny Blockword
but problem occur in some websites where 'sensex' word found in url. Then squid block 'sensex' url content website also..
I want sound and internet access thru Linux using VMware. It will give me confidence to add it as a dual boot to my hard drive. I have sound and internet access thru Windows 7. I have sound thru the sound card test but I'm not able to hear cd's. I see the time elapsing thru the cd player but no sound.
I'm having problems with the network configuration, I get the message, "cannot activate the device etho:1 no link found". I have a DSL connect thru windows. Shouldn't I be able to get the internet thru VMware? If so how?
I can't get WLAN or wireless drivers for my hp pavilon v5000 notebook
View 3 Replies View RelatedI have recently installed Ubuntu 10.10 desktop edition in my system. I am unable to access wired internet services after establishing the connection.
View 4 Replies View RelatedI managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
I connected my laptop running with Ubuntu 11 in the LAN but I couldn't access internet.But I could ping to the other computers connected in the LAN. I tried the same thing with windows 7 in the same laptop and I could access internet.
View 1 Replies View RelatedI have a wireless card that needs the Broadcom B4311 Rev. 1 driver but I don't have a way to download that driver since I don't have wireless access since the driver isn't installed. I'm running Linux Mint Debian x64.
View 2 Replies View RelatedI have an USB internet key (multimode GPRS/EDGE/UMTS/HSDPA) that only works on Windows. Though, I mainly use Linux for development activities and I don't want to move them to Windows. For this reason I decided to use a Windows guest on VirtualBox for internet access and the Linux host for the other stuffs, but I'd greatly prefer to use Linux for everything (internet too) and Windows only as internet gateway.
View 1 Replies View Related