I have a Fedora Core 8 Machine and have two identical network cards in it, two 4 port GigE NICs, PCI-Express. They use E1000E drivers.One card is working while the other identical card is not. Linux can see all 8 ports are visible with dmesg | grep pcie.I suspect the drivers on the second card have not been loaded. How would I load the drivers?
View 1 RepliesI installed ubuntu netbook remix (the new version 10),and when I try to install drivers for my network card it says I need an internet connection,when I cant access the internet,I even tried using a wired connection (since I usually connect via wireless),but still its no use. My netbook is the following: [URL]...
View 1 Replies View RelatedComplete n00b here. I am running openSUSE 11.3 and trying to load drivers for a network card. When I try to make install, I am getting this error:
Code:
Makefile:69: *** Linux kernel source not found in any of these locations:
Makefile:70:
Makefile:71: *** Install the appropriate kernel development package, e.g.
Makefile:72: *** kernel-devel, for building kernel modules and try again.
How do I install the kernel-devel?
I have Fedora11 running in my machine and it has no LAN port (RJ-45). I have a wireless PCMCIA card.The model of the wireless card is NL-2511CD EXT2(ETSI).When I insert that card to the PCMCIA slot a window pops up and ask for a WEP key. My wireless router is configured with WPA but above pop-up has no WPA option. I suspect my fedora installation does not have the necessary driver for my wireless card.I want to install that driver. I can transfer that file to the machine via thumb drive since it has no network connection yet. How do I install this? Please refer below images as I'm still a newbie at linux.
View 13 Replies View RelatedI cant get openSuse to find my wifi adapter or it does not have the driver installed.
My wifi adapter is the Realtek RTL8191SE 902.11b/g/n
I found a linux driver on the internet, but it asked me to run make in the console and when I did so it said that it couldn't find make.
how to install make from openSuse without the internet (I'm using my windows partition).
i came across BT4 last few weeks ago, and i tried it in vmware and was tempted to know more, so now i wanna try to install it and dual boot. Here's my problem, when installing the install.sh i get 2 options instead of 3 options in the partioner, so i couldnt install BT4 without erasing my W7, also if i do successfully install it, how do i install drivers for my wireless card, ohh and my laptop is a Acer Aspire 4736G, my wireless card is a intel(R) WiFi Link 5100AGN...
View 2 Replies View RelatedI recently installed Ubuntu 11.04 and I have problems with the TV card. I have this TV card is SAA7130 Video Broadcast Decoder Techcom TV Card SSD-TV-670
Where/how can I install its drivers and software?
does anyone know if there are Linux drivers for the Leadtek MPEG-2/H.264 Transcoding Card WinFast PxVC1100? I read it works under Linux, but there seems to be no specific drivers for it.
View 1 Replies View RelatedI just installed it along side of Windows 7. I have a Dynex wireless PCI card that I cannot get to work. I am also new to using a Command Prompt
View 7 Replies View RelatedWith nearly all Linux distributions (Ubuntu, Kubuntu, and Linux Mint being the exceptions), my system never seems to recognize that my laptop even has a wireless card attached to it. That is, when I run "lspci" the wireless card doesn't even show up on the list like it does with Ubuntu/Kubuntu/Mint. This narrows my options when it comes to choosing a distro to install on my computer. I can't seem to find instructions as to how I can make my wireless card work. I assume it needs a driver. I managed to find the driver, I think, in the form of a .tar.gz file. The card is a Realtek Semiconductor, RTL 8191SEvB Wireless Lan Controller (rev 10).
View 1 Replies View RelatedI'm trying to install the drivers for my nvidia graphics card. I downloaded the shell script from the nvidia website. However, there's something peculiar going on. When I execute the shell script it says it cannot find my kernel headers, yet I can verify that my /usr/include/linux/kernel.h does exist. I have selinux on, but just installed os with it on, so contexts are fresh. Checked them as well. After doing some research I found something out. When I run a 'uname -a' I get this.
Code:
Linux ariel 2.6.18-194.el5PAE #1 SMP Fri Apr 2 15:37:44 EDT 2010 i686 i686 i386 GNU/Linux
Yet when I ran 'yum install kernel-devel kernel-headers' they installed the following versions.
Code:
kernel-headers-2.6.18-238.12.1.el5.i386
kernel-devel-2.6.18-238.12.1.el5.i686
Shouldn't they be
[Code]...
I see that the error in the nvidia shell script can't locate the header files for the RUNNING kernel version which makes sense. Why would yum install that version instead of the one in 'uname -a'? Or am I misunderstanding something?
i have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
How is OpenGL support (specifically OpenGL 3.x) in the different video card drivers available for Linux?Assuming that the hardware supported it well, would the drivers be an issue?
View 1 Replies View RelatedHow To install windows drivers for a WiFi card -TEW643Pc card
View 5 Replies View RelatedI wanted to try 3d desktop so i installed 3d support for nvidia graphics using the instructions on this webpage [url]
I Dont have nvidia i have ati so needless to say i have to gui when i boot up
It shows the fedora loading bubble then a blinking cursor.
I can get to a virtual terminal.
So how do i undo what i did I just want to get it back to normal i dont need 3d support.
I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies View RelatedI've been trying to get online for the better part of a week now with no luck. I can't get my network up to download drivers for my hardware - without the drivers I have no GUI so I'm stuck trying to do this in text mode.
View 14 Replies View RelatedI have a Dell Latitude d420. I installed Linux Mint alondside Windows 7. When running Linux, the network card doesn't come on and in Window it's business as usual. I can get online.What do I do with these files I'm downloading from this site and forum and broadcom?
View 1 Replies View Relatedwhat is the command to check NIC drivers and how would you reinstall/update them?
View 3 Replies View RelatedI got my desktop all set up the way I like it, and it took a lot of tweaking and I can't even remember where I set all of the settings.
Is there a hidden file (or folder) or something like that in my home folder I can copy over to another Ubuntu machine to duplicate it?
I'm looking at settings like theme, colors, menu transparecies, etc.
I am downgrading one of my Sid boxes to Testing. I've finished the install and now duplicating the system for installed packages.
Before I started, to get a list of installed packages
Code: Select allsudo dpkg --get-selections > package.txt
Now when I try to duplicate the installed packages
Code: Select all sudo dpkg --set-selections < package.txt
I receive over 1000 lines with the message:
Code: Select alldpkg: warning: package not in database at line wxyz
I did try
Code: Select all dpkg --configure -a
without any effect.
Is this just a diffence between the Sid package database and the Testing database?
I'm looking for some way to search a given directory, copy its folder structure to another given directory, and copy from the original only certain files into the newly created directory.Vague, I'm sure. But here's what I'm actually looking for:My music player won't display album art without a "cover.jpg" image in each folder where the files are, but I have Rhythmbox set to only copy the top rated songs. Each file does have its cover embedded in it, but there's also a cover.jpg in each folder.
So I'd like to let Rhythmbox handle the actual song copying, and then have a script or something that I can run that will scan my onboard music directory for cover.jpg files and then place them in the appropriate folders within my music player's folders. Obviously I can't just copy my onboard music directory, or I'm getting *every* song, not just the top-rated, which defeats the purpose of syncing at all.
is any apache-module out there that allows duplicating traffic?
I want to test an new Application Server by duplicating the traffic from the old production system. Answers of the new will be DROPped ...
Today I got a call from our chairman saying that he gets duplicate mails. When I checked the postfix logs, I found that it is the locks that are creating problems. The mail which duplicated was to an alias which included our chairman. In that alias, the mailbox of a user was locked since he was receiving his mails (I use dovecot for mail distribution), and hence the lock was on for that mailbox. When postfix tried to deliver the mails, it encountered the lock and the mail delivery was stopped, thus by requeuing the specific mail. While postfix retried the delivery, it found another lock with another mailbox and again the delivery was stopped, thus sending the mail back to queue
View 5 Replies View RelatedI have an HP Photosmart USB printer that I configured with HPLIP (which seemingly "exports" into CUPS). All is well until the printer is turned off and then back on again sometime later: somebody, somewhere automagically adds the printer to CUPS so that I have two, count 'em, printers defined.
Code:
Some UDEV rule, some other thing?
I'd like to add another network card to my linux box. I've plugged in the hardware and rebooted, but I do not see a second network config file under network-scripts. Also, if I hit ifconfig -a, I only see one network listing. How do I proceed?
View 3 Replies View RelatedI installed rhel 4 Network card not deducted intel(r) 82566DM Gigabit network would you like tell either rhel 4 support or not. if support how can i download deriver and install ??
View 2 Replies View RelatedMy name is Matt i've installed Redhat software on my PC using PCI network card.which command can i use to setup my PCI card to be the default network card?
View 1 Replies View RelatedI want to monitor network traffic with ntop from a Lucid 10.04 machine. Both NICs have picked up an IP address, I need to put one in promiscuous mode. I typed sudo ifconfig eth1 promisc and the response was SIOCSIFFLAGS: Permission denied.I also tried sudo su ifconfig eth1 promisc[sudo] password for user1: I put it in Unknown id: ifconfig
View 3 Replies View Relatedi am new to redhat linux,how do i list all newly added network interface card.can someone kindly help me with this?
View 11 Replies View Related