General :: Dual Booting WinXP & 9.04 - Error 12: "Invalid Device Requested"
Sep 28, 2009
I had Windows 7 and Windows XP. It was 3 partitions in one HD (two OS' and one for files) and another separate HD (which doesn't have any system, it's just media files and stuff). When booted, I used to get the Windows 7 screen, that allowed me to either boot 7 or XP. I thought I had tested 7 enough and wanted to try Ubuntu, so I (from the Ubuntu CD which I downloaded and burned) deleted the 7 partition and made a 2GB swap partition, and, what was left, an Ubuntu partition on which I installed it.
Now when I boot I get an Ubuntu boot screen that shows several Ubuntu options and a WinXP option. Ubuntu works fine, but if I choose WinXP, I get "Error 12: Invalid device requested". I didn't change anything more than what I said. The details for the WinXP boot option seem to be:
rootnoverify (hd0,4)
savedefault
makeactive
chainloader++
What can I do to be able to boot WinXP again? (and also Ubuntu, whenever I want to). The only thing I can think of is using Windows XP CD's restore thing to restore the boot menu, but that would stop me from using Ubuntu...
View 3 Replies
ADVERTISEMENT
Dec 4, 2009
I have installed Windows 7 followed by Fedora 11. Everytime I install Fedora 11 with Win 7, the first to boot, I get BOOTMGR missing. Later I used "df -h" command to see the disk file usage fdisk -l" to see the info regarding Disk Partitions. Went into the /boot/grub/menu.lst and modified the order. I set the partition where I find the bootmgr.exe.mui, there was another file named "memtest.exe.mui in the same file.
I navigated to the above said through Fedora 11. Located inside the Win 7 installed directory /boot/en-US/
When I changed the menu.lst file, I get a new error Error 12: Invalid device requested when I tried to boot Win 7. Does that mean that Fedora 11 GRUB is not getting the bootmgr.exe.mui since its 2 levels inside the boot directory ??
View 2 Replies
View Related
May 25, 2011
I have message: error 12: invalid device requested.It happen when i choose ubuntu partition. before this error message the netbook run perfectly with dual boot. ubuntu is 1st option winXP is 2nd option from the list(maybe grub ?) Since i want winxp as the 1st option instead ubuntu,i change the file /boot/grub/menu.lst. what exactly i change is just cut and copy the winxp part to above ubuntu part.
if i press 'e' in ubuntu show:
root (hd0,6)
kernel /boot/bla..bla.bla..
initrd /boot/bla..bla.bla..
[code]...
View 1 Replies
View Related
Apr 5, 2010
I had a windows 7 professional on my computer. I tried dual booting it with ubuntu. While installing ubuntu when it asks which partition you want to install it "as it said your all data in the partition would be erased but not before you confirm" so I selected go back and aborted installation because I didn't wanted that and bang I start my system again an I get this error "no boot device found". I ran my hard disk test it say's passed so I don't think my hard disk is corrupted. I tried using windows 7 recovery disc but I guess it doesn't even detects a operating system on my laptop. I got no back up of my data. Any way to get back my data if I cant get windows back!
View 8 Replies
View Related
Sep 13, 2010
I've been playing around with trying to assemble a bare-bones Linux system on a disk.img file through a loop device. I compiled the most recent stable kernel and then copied it onto the root partition in the image. When I try to boot up into the image using qemu, grub gives me this:
Code:
Booting 'tiny'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinux
Error 13: Invalid or unsupported executable format
Press any key to continue... I am confused because I compiled the kernel with 'make bzImage', and the architecture hasn't changed (qemu on the same machine used to build the kernel). So it should be bzImage format. Is that what this Error 13 means, or could it means something else is wrong...?
View 1 Replies
View Related
Oct 1, 2010
Device/Special file Clairification Requested.I'm reading a short article on Device/special files because it is related to VFS. This article has this paragraph that has to many pronouns in it to get an understanding of. URL..."In short, a device file (also called as a special file) is an interface for a device driver that appears in a file system as if it were an ordinary file. This allows software to interact with the device driver using standard input/output system calls, which simplifies many tasks."
What does a Device file have to do with the Application and the Driver communicating? Wouldn't the order of data transfer be , Application to driver and then to Device file?
View 3 Replies
View Related
Jun 24, 2010
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
View 9 Replies
View Related
Feb 5, 2010
I'm trying to install Fedora 12 from a DVD created by an iso I downloaded. When the install gets to the point of actually installing files, I get a message saying that it can't find 'authconfig-gtk-6.0.0.-2.fc12.i686.rpm'. I looked at the DVD for that file and it isn't there. I found 'authconfig-gtk-5.4.13-1.fc12.i686.rpm'. Any ideas how to fix this? The DVD passed the media check at the beginning of the install. I'm not exactly a newbie in Linux as I have some experience with it.
View 4 Replies
View Related
Sep 30, 2009
i used my windows box to connect to ftp(fed box) and i keep getting an error saying "The requested name is valid, but no data of the requested type was found." does anyone know why i cant connect?
View 1 Replies
View Related
Sep 12, 2010
I just installed Ubuntu Remix 10.04 on my wifes MSI U100 netbook. I did a dual boot just in case she had to get into Windows for something. I let the install automatically partion (did the side by side option). Anyway, Ubuntu works fine and imported all her documents and stuff. Problem is Windows XP won't boot. The first time I tried to boot Windows XP I got a message saying the hardware had changed and I had to select safe mode, normal boot, last known good, etc... I booted normally. I got the splash screen followed by a quick flash of BSOD and a reboot. I does this no matter how I try to boot Windows (safe, command prompt, etc). Anyone have any idea what the problem is?
View 3 Replies
View Related
Jun 13, 2010
I'm having some difficulities with truecrypt and cannot figure out what's wrong since this is my first attempt to create hidden encrypted partition. I'm using ubuntu 9.10 64b with latest 6.3a truecrypt. After using truecrypt gui (just command truecrypt) I've tried: create volume-->create volumne within a partition/drive-->hidden trucrypt volume --> select some /dev/sdX by my choice --> select aes & sha512 --> password --> and format it.
when formating finished message "wrong ss, swith or wrong superblock of /dev/loop0" appeared. I've got no idea what could I do with it neither know whats program trying to do! Ok formating's done, then if you're trying to mount that partition then I would expect prompt for password, but that did not happen ...
EDIT: sudo mount /dev/loop0 /media/tmp/ also complaint about wrong superblock, but that does not ring any bell since i've got no idea what /dev/loop0 is or is for...
EDIT2: I've tried another approach also:
sudo truecrypt -t -c
sudo truecrypt -t /dev/sda3 --filesystem=none
but the first command finished creating 100G drive in 1 sec (nonsense) and latter one prints:
Error: device-mapper: reload ioctl failed: Invalid argument
Command failed
View 3 Replies
View Related
Jan 12, 2011
I had a working dual boot Ubuntu 10 and Windows 7. Anyways long story short, I got it working again but have lost the boot option for windows 7. If i run fdisk -l, I get the following.
root@support-Latitude-E6400:/home/support# fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
[code]....
I installed gparted and can see that windows 7 is installed in dev/sda6. In another forum, i read that someone had to edit their menu.lst so i did with the following.
title=Windows 7
rootnoverify (hd0,6)
makeactive
chainloader +1
When i try to boot from windows 7, i get the following error. Error 12: invalid device request. How can i get my laptop to boot from windows again?
View 9 Replies
View Related
Jan 8, 2011
I have tried searching for the same problem but can't find it. Close but not exact. I have a dell optiplex I use for internet surfing. I do a reformat every few months to get the junk off it.I do a reformat to clean the drive and load XP PRO then load ubuntu 7. or 8. It gives me the option to use either at start up.
I did it a few weeks ago and it has been running fine until I did updates of both XP and ubuntu. When I it fired it up Win XP worked fine but when I choose ubuntu I would get the corrupted or missing hal.dll error and it wouldnt go any further. Several reboots with the same result XP works but not ubuntu.I did a reinstall of the hal.dll file using XP disk for repair according to britec on ..... (but I didn' t do the second step yet).Now I still get the corrupted or missing hal.dll error when I try to get into ubuntu and if I choose XP it freezes. I try going into safe mode and it loads but (wireless) mouse/keyboard won't work.
View 10 Replies
View Related
Dec 14, 2010
In 10.04 I was using the following commands to mount an encrypted disk image:
Code: sudo losetup -f Which tells what loop back device block is available Then I'd type:
Code: sudo losetup -e aes /dev/loop0 /home/user/crypt.img and then enter the device's password
Code: sudo mount -t ext4 /dev/loop0 /media/crypt I've tried this in 10.10 and it hasn't been working (I can't remember if I did anything in 10.04 to make it work). I've installed the loop-aes-utils package and restarted my machine. Every time I try the 2nd step, after entering the password I get: Code: ioctl: LOOP_SET_STATUS: Invalid argument, requested cipher or key length (128 bits) not supported by kernel
View 1 Replies
View Related
May 5, 2009
I'm trying to install a dual booting machine with OpenSUSE v11.1 32bit and CentOS v5.2 64bit. I installed OpenSUSE first and allowed it to install and configure grub in the MBR and after that I wanted to proceed with CentOS v5.2. The installation went fine with two notable exceptions:- when I had to configure grub installation parameters, CentOS offered me only 2 solutions: either install it on the MBR of the first hard disk or not installing it at all. Other distributions are more flexible allowing you to install it in the boot sector of the root partition for example. Because I didn't want to ruin the existent grub onfiguration, I reluctantly accepted not to install it for CentOS assuming that I could manually configure the entry later in grub's menu.lst file.
- when I was presented with the options for software components installation, I've clicked on virtualization category/function because I intend to use the machine as a VMware host. There was no guidance on screen at that point and I blindly assumed that by choosing the virtualization function I would get necessary tools and drivers that will help me further on. It seems that this was a wrong move as you can see it below.
After completing the installation, I tried to search for a template or guiding on how the menu entry in menu.lst should look like but the grub directory was empty, not surprisingly because I've told CentOS earlier not to install it. Using the files in the /boot directory from the CentOS installation I tried to improvise a menu entry but it's not working. The boot stops with famous Error 13: Invalid or unsupported executable format. Using the file command to check what kind of files I'm trying to load as kernels I'm getting :
marte:~ # file /mnt/vmlinuz-2.6.18-92.el5xen
/mnt/vmlinuz-2.6.18-92.el5xen: gzip compressed data, from Unix, last modified: Tue Jun 10 19:20:51 2008, max compression
[code]....
View 2 Replies
View Related
Sep 29, 2010
I m unable to bring my wireless lan UP and getting the following error: SET failed on device wlan0 ; Invalid argument in dmesg i m getting : link not ready wlan0 Network card is : Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
View 7 Replies
View Related
Apr 19, 2010
I try to install IPsec-Tools on Slackware 13, but I get an configure error: configure: error: Security Context requested, bu no selinux support! Aborting. I'm linux newbie and I'm following a slackware-basics tutorial, I did as in the tutorial, but the configure stops and aborts:
Code:
# CFLAGS="-O2 -march=i486 -mcpu=i686"
./configure --prefix=/usr
--sysconfdir=/etc
--localstatedir=/var
[Code]...
What can I do? How can I enable/install selinux support? I guess it's related with AH and ESP protocols, which in my kernel are defined as modules (m). If so, how can I enable them?
View 5 Replies
View Related
Apr 3, 2011
I'm dual booting Windows 7 and openSUSE. I attempted to start up my computer, and got ERROR 17 on the GRUB loading page. I am assuming this is related to me disabling the openSUSE uninstaller on startup in Windows.installer seemed completely superfluous.
View 9 Replies
View Related
Jul 22, 2011
I am having trouble getting FEdora 15 running on my MacBook Pro. I had Fedora 15 installed before on this MBP before, so I know it works. I basically followed the good old instructions of
1. Create a Windows partition in bootcamp (rEFIt was already installed from trying to get ubuntu running)
2. Boot from disk and install in Windows partition with bootloader on installed on the / partition
3. Install, reboot, and resync the MBR using rEFIt partitioning tool
4. Shut down the computer and start up on the parition you installed linux on
Now I get a grub error code...
View 2 Replies
View Related
Oct 3, 2010
i wanted to see the red hat side of things and do some virtualization with CentOS, so i am trying to dual boot ubuntu 10.04 LTS and CentOS 5.5. the machine is a laptop, toshiba A100 series. what I did was to create the following partitioning scheme via Ubuntu LiveCd
Code:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 19457 156288290+ 5 Extended
/dev/sda5 1 2103 16892284+ 83 Linux
/dev/sda6 2104 9988 63336231 83 Linux
/dev/sda7 9995 12623 21117411 83 Linux
/dev/sda8 12624 18800 49616721 83 Linux
/dev/sda9 18801 19457 5277321 82 Linux swap / Solaris
created an extended partition and in there have made sda5 and sda6 as / and home for ubuntu and sda7 and sda8 as / and home for CentOS. and sda9 as swap. I installed ubuntu first and then installed CentOS with no bootloader. Run sudo update-grub through ubuntu and now i have both Ubuntu and CentOS available. But when i select CentOS, i have an error which reads "invalid magic number".
I have grub2 installed, haven't downgraded or done anything to it and the ubuntu install is fresh, one week since i updated to 10.04 from scratch. I have found much contradictory stuff on google, but not something that provides a definite solution and also this post but the second command provided in the solution is one i cannot understand very well and it doesn't seem to work. what I am doing wrong here and how to make this work. I would prefer to do things via Ubuntu since debian stuff is what i am comfortable with and i am installing CentOS to learn not to do work on it.
View 1 Replies
View Related
Oct 18, 2010
I'm trying to get a complete overview of booting so I can multiboot. An explanation of the hardware that stores data and the hardware that runs it with the paths the data takes would be awesome!
Here are some quotes that are not comprehensive.
Quote from [url] "When the processor first starts up, it is suffering from amnesia; there is nothing at all in the memory to execute. Of course processor makers know this will happen, so they pre-program the processor to always look at the same place in the system BIOS ROM for the start of the BIOS boot program. This is normally location FFFF0h, right at the end of the system memory. They put it there so that the size of the ROM can be changed without creating compatibility problems. Since there are only 16 bytes left from there to the end of conventional memory, this location just contains a "jump" instruction telling the processor where to go to find the real BIOS startup program."
System Memory is your RAM is it not? Why are they being specific in stating the address location in the Firmware that BIOS uses? An external EEPROM on the board is totally different from RAM is it not? Does the BIOS data travel to a specific RAM Location?
Is there a small processor connected to BIOS or is everything run with the Main CPU?
What exactly is the "chipset" that is referred to with booting?
View 2 Replies
View Related
Jul 19, 2010
My friend recently installed ubuntu to his existing computer which had windows XP. Today when he tried to start the PC it showed the error
[Code]...
View 3 Replies
View Related
Jan 18, 2011
I had Ubuntu installed, i installed Debian and there was no dual boot. So i formated all the hard disk to install only Debian. It installed but at boot i get error: no such device and the grub rescue> prompt. i googled for a solution and nothing worked:
- i tryed reinstalling grub, not worked
- i did the windows cd fixmbr trick, not worked
- reinstalled debian with fixmbr the first step and nothing
- tryed deleting with dd the mbr, not worked
- reinstalled grub from debian rescue, not worked
what should i do? i can't access my computer? please tell me how should i fix it? the google guys will kill me because i put their servers on fire
View 14 Replies
View Related
Oct 25, 2010
I installed 10.10 using wubi (Host system is Win XP). I want to create a symbolic link of a file on the host system (Windows c:abc.doc file) in my Ubuntu home ~/ directory.
When I type command ln /host/abc.doc abc.doc It gives me following error ln: creating hard link `abc.doc' => `/host/abc.doc': Invalid cross-device link
View 1 Replies
View Related
Nov 24, 2009
The time in my Fedora 12 x64 installation is 5 hours behind what it should be. When I change it to the correct time, Windows XP x64 is now 5 hours ahead! (Dual boot setup). How I can sync the times on both os's. Both are set to GMT-5.
View 4 Replies
View Related
Jan 11, 2010
I have 2 Hard drives, the original 30GBs with Windows XP on it, My son put 2nd hard drive into pc as slave (400GB), no problems, WinXP recognised 2nd drive. This was all a way to give 'good ole Mum' a chance to muck about with Linux.Got a Linux Format Mag with Ubuntu 9.10 on it, amongst others, but this one I knew from previous use. I have installed it on the 2nd hard drive, not sure if I correctly (manually) partitioned but I put ( I believe) a home partition, a swap partition, left ( so I thought) a 3rd partition space, and said install. Ubuntu runs fine and see the small HD with WinXP but WinXP doesnt see the HD with Ubuntu, and I wanted to use the 3rd partition for the WinXp as I need to use that for Grant writting I do for not for profit organisations govt depts that I apply for grants from are MS freaks, that said, all runs ok but what have I done that wont let WinXP see to utilise the 3rd partition. Be kind, I have a load of senior moments these days
View 5 Replies
View Related
Oct 21, 2010
I originally wanted to dual install 10.10 64 Ubuntu with Windows 7 64 RAID 1 HP PC, but RAID got corrupted and I could find no fix online except using fakeraid unsupported software. The whole thing blew my muind. I gave up after 4 or so reinstalls of windows 7 to fix RAID. So I decided to install a dual boot 10.10 Ubuntu i86 with my old WinXP i86. I kept getting these errors at boot up: unknown filesystem, file not found, out of disk, no such partion and so on. I tried just about every grub reinstall I could find, including article here: "Recovering Ubuntu after Installing Windows."
After a number of tries my friend installed Ubuntu successfully, but then when I installed windows xp I am stuck here, again. I did do the Reload grub tutorials again as well. I may just give up on WinXP and have my friend reinstall Ubuntu for me.
[Code]...
View 9 Replies
View Related
Dec 6, 2010
Was running dual boot 10.10 and winxp on a MSI P4M900 motherboard. Have two HDs - one with OSs and some storage and the other purely backup for storage and Ubuntu home. Motherboard died and going to be replaced by Gigabyte G31 board. I will be using the same video, audio PCI cards and memory from old board. Should I look to a clean install of 10.10 and then bring back to life from my backup files (bookmarks, email etc) or could I plug in hard drives and boot normally? There is conflicting advice when I google - some say its OK just to boot, the kernel will sort out the new mboard drivers, others say you need a clean install.
View 2 Replies
View Related
Nov 13, 2010
I have a hard drive that I have partitioned into two large chunks. I have Fedora 12 on one, and I would like to put another distro on the other. I do most things on my Fedora, but on the Second distro, I'll be doing more sensitive things such as banking. If I wanted to "Lock out" the Banking distro, and only boot to it if I have an SD card or Flash drive, to act as a "key" would it be simple as putting the boot sector of the banking Distro onto the removable media, or is there something else I need to do?
to summarize, I'd like my system to automatically boot to Fedora, unless I have some form of removable media (preferably an SD card but Possibly a Flash drive) plugged in; in which case, I'd like it to boot to my banking Distro. What would be the easiest, way to go about this?
View 14 Replies
View Related
Feb 22, 2010
WinXP Partition loading as a read only and can't fix it with PYSDM (storage device manager) Let me provide some history as to how everything was installed: From my old WIN XP hard drive I used clonezilla to clone the drive to a partition on my new hard drive for Linux. Windows is on SDA4 which is the last partition of the drive, it is mounted at sda4/windows using ntfs. I then loaded Mint 8 gnome on the 2nd partition sda2 using ext3 mounted at /, sda1 is my Linux swap, and sda3 is mounted at /home using ext3. While installing I selected to mount Linux ext3 at /
When I choose to load winXP from the grub boot loader I get dev/sda4 no such device 10CDR36778638F73. Also when I try to unmount from disk utility I get the following error: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=10CDF36778638F73 from /windows Seemslike I need to rename the drive but it won't let me in disk utility.
My Problem is that within PYSDM (storage device manager) I uncheck Mount file system (sda4/windows) as a read only but it will not stay unchecked. I have unchecked it hit unmount and mount and it still is checked to mount as a read only. This is the code in options for sda4 in PYSDM (storage device manager) nls=utf8,umask=007,gid=46
View 1 Replies
View Related
