I had dual boot on my Asus laptop, Windows and Hardy. Then my Windows XP crashed and the person who repaired installed Windows 7 but didn't preserve the dual boot prompt on startup. I've explored BIOS but there seems no way of accessing my Ubuntu partition that way.
View 9 RepliesI had Ubuntu 10.04 on this machine and wanted to convert it to a dual boot. It's a 500GB hard drive. The HDD had 3 partitions: one really big one, and two swap areas of about 6 GB each. I ran GParter and carved the big partition into a 100GB partition and a 400GB partition (less the swap areas). Then I installed Windows XP into the 100GB partition, then installed Ubuntu 10.04, selecting the "create dual boot" option.
It dual boots beautifully, and everything runs just fine. But I find that Ubuntu has split the 400 GB partition into two 200 GB partitions, and one of them is simply off-limits. I can see it, but I can't write to it. The attached png shows the Disk Utility, with the mystery partition selected. Its only contents is a folder called lost+found; I cannot open it.
is it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
View 4 Replies View Relatedif having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies View RelatedI'm running a dual boot of Ubuntu 9.10 and Windows 7. For months now everything has been just wonderful. Recently, however, I tried to add another partition (in windows) and saw that my Ubuntu partition is recognized as RAW. I formatted it as NTFS originally. In Ubuntu, it is recognized correctly (ext4). I don't know what's going on. I'd like to be able to install drivers to recognize this partition in Windows. Will I have to reformat? I'm not sure if it's at all connected, but probably worth mentioning: while booting into Ubuntu, I received an error about "usplash mode failed." It also said something about "mount of filesystem failed." (I really, really wished I had written down the error message.) Everything seems to work now.
View 6 Replies View RelatedWhen I installed Ubuntu I set it up to dual-boot with windows and didnt put much thought into the partition sizes, and now I want to make the ubuntu partition bigger. I shrunk the windows partition from gparted fine and then booted up off my ubuntu 10.04 disk to make the ubuntu partition bigger, but it won't let me do so from gparted. Attached is a picture of how my hard drive's currently set up.
View 8 Replies View RelatedLast week I installed Ubuntu 10.04.1 on his Windows Vista machine, it has a 200GB hard-drive and he wanted 100GB for Vista & 100GB for Ubuntu on there. So instead of selecting the default partition I split it to 100GB each.
Now, however, I can't boot back into Windows and when it loads I am taken to the 'Recovery Tools' options. Have I 'cked up his partition? I can still view all the files/folders on his Windows partition from within Ubuntu however, so maybe there is a chance I can shrink down the Ubuntu partition again and restore his Windows partition?
[Code]...
I've shrunk my Windows partition to ~200GB and made ~100GB of free space for Ubuntu BUT .. it doesn't allow me to create a new partition there as I already have 4 primary ones.Since all of the given partitions ( including Recovery and Tools ) can not be touched ( removed ), I have no idea on how to solve this ..
Code:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
[code]....
i know there are lots of posts to talk about this but i'm still not sure about what to do . I have a new 250GB hard disk and want to use it to dual boot windows xp and ubuntu. i know i will have install xp first, but what would be they best way to partition the drive ? i want to be able to have some space in xp to to download and use 3d simulation programs and for gaming. and i also want to be able to see all my data from both OS.I guess i'll have to choose the manually partition the drive option on the ubuntu installation, but then what should i do exactly? and what would the partition types be? NTFS, FAT32, etc.I have a 2GB RAM, i think it matters for the swap partition size.
View 8 Replies View RelatedRegarding the installation of ubuntu 10.0.4 on my HP pavilion DV5000 laptop.
I previously installed windows 7 in my laptop and i would like to have ubuntu and windows 7 in dual boot. in order to do that i need to free up some space to be able to install to create partitions for ubuntu and the swap even if I have 30GB of unused space.
When i launch the live cD and i reach the step 4 ubuntu is actually recognising three operating systems installed:
- windows 7 (loader) under dev/sda1 (92,86GB) NTFS
- windows NT/2000/XP (which is corresponding to my "HP recovery" partition) under dev/sda2 en FAT32 (6,2GB)
- windows XP embedded (I don't unerstand what it is) under dev/sda3 NTFS (1,1GB)
when I go to the step 6 to modify the size of sda1 to free up some space, i don't have the possibility to change it, i can read "unknown" under the used space collumn.
I also tried to resize this partition using gparted but unfortunately i had the same problem, when i select it all the options to modify it are greyed out and i can notice a key near the hard drive logo (is it locked ?).
i have windows xp with ntfs partitions on my laptop i want to install centos on it will i be able to dual boot centos with windows xp on the ntfs partition
View 2 Replies View Relatedwhen i installed it the windows 7 Partition no longer works. I can see the windows 7 partition but when i click on it, it just reloads the grub boot loader. Im in college and need the windows 7 partition.
View 5 Replies View RelatedMy old-ish Dell laptop is currently running Windows 2000 and Ubuntu 9.10. I originally installed 2000 to try and squeeze a bit more performance out of the laptop for general use, but in practise Ubuntu is running great and sees far more use than the Win2K installation so I've decided to create a stripped-down (i.e. non-networked) XP installation purely to run a few favourite audio applications.
I plan to do a fresh Windows install and wipe the current C: partition. Is there anything I should be aware of in terms of the GRUB bootloader. Will it simply recognise the new XP installation? Obviously I will back up my data before I continue, but are there any other precautions to take with respect to dual-booting? I could do without having to reinstall Ubuntu too!
I bought a PC with Window Vista on it as my partner needs it. Using gparted I set up Primary partitions for Vista OS (sda1) and Ubuntu OS (sda2), plus an extended partition for Vista files, Ubuntu /home and swap:
fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 * 1 3969 31880961 7 HPFS/NTFS
/dev/sda2 3970 5294 10643062+ 83 Linux
[code]...
My problem is Vista (as always). The 30GB I allocated is not enough, even just for the OS and it won't now boot from GRUB, though I can see it from GRUB. I don't want to do anything that risks a problem for Ubuntu. Will grub still see both OS if I wipe sda1 (Vista OS) and reinstall Vista OS on the extended partition sda6? Ideally I would like to merge sda1 with sda6 and install Vista on that, but that looks way too risky / impossible.
Edit - There is another drive on the PC which is much larger and I use for backup. Is there any scope for installing Vista on that one so that GRUB still identifies both. Not ideal as I like having one as the backup for the other.
I successfully partitioned my desktop with Gparted and made it into an XP/Ubuntu dual boot.
Now i'm trying to do the same with my netbook (eee pc 1000he), and the existing partitions look funny:
How should I change this to prepare for installing Ubuntu? Can I just install to the unallocated space on the extended partition? I don't need optimal efficiency here, I just need to know where to install Ubuntu for a workable dual boot.
It's confusing to me that Windows is on an extended partition, and also that /dev/sda2 has the boot flag (this drive contains nothing but two undeletable folders titled "amd 64" and "i386"). This set-up is the result of a Windows re-install at a sketchy computer shop.
To install Ubuntu alongside Windows 7, I have to shrink Windows 7 partition C:. But due to some unmovable files, I cannot shrink as much as I plan by using Windows own shrinking tool. I guess many of you who have both OSes on the same hard drive must have similar experience.
View 8 Replies View RelatedI know it is possible to move the ubuntu home directory but what is the best way to move it safely to an NTFS partition that already has valuable data in?
View 8 Replies View RelatedI have Vista Home edtion and Linux, I have formatted Linux partions and now that Grub is not letting me boot into Windows..I had C:wIndows D:New Volume and rest of the space was E:
View 5 Replies View RelatedI have been having problems hibernating my windows 7 partition recently. It happened approximately right after I set up the dual boot.
I have found other topics where it says to make sure that the windows 7 partition is marked as the active partition. I have since done so and it has not changed anything. I did it with Partition Magic on Windows. I did find it suspicious though that my Dell Recovery partition is labeled as boot while the Windows one is marked as Active and System.
However when I looked at it using disk utility in Ubuntu the windows 7 partition is marked as Bootable while the recovery partition is not.
Hibernation works on Ubuntu with a couple error messages while shutting down and some weird screen issues while booting up. But it ends up working decently.
Under Disk Utility the Ubuntu Partition is not marked as Bootable. Should it be?
(This is for a 100% Clean install)
Q1) I was wondering if it is possible to Dual boot Ubuntu with Windows XP on a 1TB RAID-0 setup ?
Q2) Also, is it possible to create a SWAP partition (for Ubuntu) on a NON RAID-0 HDD ?
Q3) Lastly... I read GRUB2 is the default boot manager... should I use that, or GRUB / Lio ?
I have a total of 3 HDDs on this system:
-- 2x 500GB WDD HDDs (non-advanced format) ... RAID-0 setup
-- 1x 320GB WDD HDD (non RAID setup)
(The non RAID HDD is intended to be a SWAP drive for both XP and Ubuntu = 2 partitions)
I plan on making multiple partitions... and reserve partition space for Ubuntu (of course).
I have the latest version of the LiveCD created already.
Q4) Do I need the Alternate CD for this setup?
I plan on installing XP before Ubuntu.
This is my 1st time dual booting XP with Ubuntu.
I'm using these as my resources:
- [url]
- [url]
Q5) Anything else I should be aware of (possible issues during install)?
Q6) Lastly... is there anything like the AHCI (advanced host controller interface) like in Windows for Ubuntu?
(Since I need a special floppy during Windows Install...) I want to be able to use the Advanced Queuing capabilities of my SATA drives in Ubuntu.
I am about to get a new laptop here soon and I was planning a dual boot like I have on my current laptop (Win7 and Ubuntu), but I have something special in mind. I looked around the forum to see if there was anything like what I had or if it was even possible but I didn't see anything quite like this.I was wondering if this was even possible, and if so, would anyone be able to tell me what filesystem I should use for my windows swap partition?
View 6 Replies View RelatedI have two partitions on my HDD. A Windows XP (hd0,2) and an Ubuntu 9.10 (hd0,1).I have been using the Windows mainly and ran a program that changes the HDD's serial number. Now when I boot up and Grub loads, I try to access the Windows partition and get the following error:
Error: No Such Device: 2e3857fb3857c08f
I am still able to boot the Ubuntu partition but can not seem to get grub to point to the Windows partition any more. This is very frustrating as I really need to get back into that partition soon.
3 partitions (in order): Windows 7, CentOS and shared data partition.
I need to increase the size of the Windows 7 partition (c:windowswinsxs seems to be something not easily remedied).
GParted didn't work in moving things around (bad sector) so I wiped out its partition (# 2 out of 3) and I was able to increase the size of the Windows 7 partition (I can reinstall CentOS easily and not much work lost).
Except ... no more grub menu (unsurprising). This incantation does allow me to boot into Windows 7.
Is there any way of rebuilding the grub menu short of reinstalling CentOS (5.5)?
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
View 2 Replies View RelatedAfter installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
I downloaded Ubuntu 10.04 and I want to make a dual boot with Windows 7 Ultimate using Windows Boot Manager...
I deleted my last Ubuntu OS (9.10) just because of GRUB
I recently moved and didnt have internet. Out of a fit of boredom i decided to get me Ubuntu 10.10 disk and dual boot. My laptop has a SD slot in the front of it that has never been used so i decided that itd be cool to have ubuntu on an SD card that i could boot any time. I used the default installer to install it onto the SD card instead of using the Universal USB Installer (i imagine this is where i went wrong). It installed and everything works fine and when i boot up it lets me choose between Linux and Windows when the SD card is inserted. When it is not i get this screen http://imgur.com/gg63v. The only really problem is me worrying that the sd card will be lossed or get broke and i will no longer be able to access Windows. Is there anyway i can set the windows boot loader back t the default bootloader (i think this is what need to be done i may be completely wrong>
View 3 Replies View RelatedI had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
I got an old Sony Vaio from a friend & wanted to keep a stripped down version of windows along side 10.04. During installation when I saw two Windows partitions. I saved the first one which was about 5 gig & deleted the other bigger partition & used ext4 on the free space for Ubuntu. I assume I only kept the recovery partition so basically I have sda1 (recovery partition)ntfs & the rest ext4. If I pick Windows from the grub menu at start-up the recovery starts but then shuts down with an error. I'm assuming its looking for the other ntfs partition to install & can't find it but I'm not sure what to do. I haven't done anything with Ubuntu yet so deleting & reinstalling is not a problem but if I do getting back to the restore menu probably will be. I don't have any disks that came with the computer either.
View 8 Replies View RelatedI just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.