General :: Domain Not Listning To Any Port Other Than 80 / Solve It?
Apr 26, 2010
I have one server, in this one application is running on ports 80 and 443,
but i want to run another application in different ports,
When start the application, application is running fine in the server but i am not able to connect to that application from the web browser.
It seems to me that other port(i.e. except 80 and 443) not listen by the server.
Can anybody tell me what is the problem?
and what can i do to solve this problem.
View 2 Replies
ADVERTISEMENT
May 16, 2011
I'm trying to solve an intermittant serial port problem on an embedded medical monitor. We have determined that the port is receiving characters from the external device but the serial thread is not transferring the chars from the buffer. Has anyone seen this before? Looking for some guidance on what to look for. this problem happens at start up about 1 in 50 boots. We're using kernal 2.6.29.6.
View 1 Replies
View Related
Sep 28, 2010
I can't port forward to ftp behind my firewall, I tried several attempts but none worked.
Can anyone help me solve this?
View 10 Replies
View Related
May 2, 2010
My computer has 2 HDDs attached to 1st and 2nd SATA ports of my mobo respectively, the 1st SATA drive is empty while the 2nd have my Windows Vista on it. I also have a Perc/5i RAID card with 2 RAID arrays defined.
I am going to install Ubuntu 10.04 x64 to the 1st SATA driver (I expect it will be /dev/sda), but when I try to install, I found my drives are recognized as below,
/dev/sda > 1st RAID array of my Perc/5i
/dev/sdb > 2nd RAID array of my Perc/5i
/dev/sdc > 1st SATA drive < I need to install ubuntu on this drive
/dev/sdd > 2nd SATA drive
I don't want to install 10.04 as /dev/sdc because I may add more arrays to my raid card which from my experience of 9.04, it will probably change the drive letter of my current /dev/sdc and then system will fail to boot.
Is there any way to force my 1st SATA HDD as /dev/sda during install ?
View 1 Replies
View Related
May 17, 2010
in searching i never found an article that got it just right. so here it is tried and true..
1. I usually start out assigning myself a static ip address. this is not needed to join but its something I always do.
2. next i set my dns settings in resolve.conf to my local dns server
3. download likewise "apt-get install likewise-open"
4. for kerberos i just leave it blank
5. go to your nsswitch.conf file located in /etc/ and set the hosts to only files and dns
6. now you should stop your networking and start it again so that the dns changes take effect.
7. you are now ready to try and join your domain. "domainjoin-cli join fqdn.of.yourdomain administrator" you can substitute administrator with any admin account
you should now be joined to your domain for adding sudo rights to the "administrator" membership
1. open your sudoers file located in /etc/
2. the following line to the bottom of the file "%DOMAIN\administrators ALL=(ALL) ALL" replace DOMAIN with your domain name. do not use your fqdn. all set. hope you enjoy
View 2 Replies
View Related
Aug 17, 2009
I want to give Administrator privileges to Root user in Linux Domain Controller
View 12 Replies
View Related
Jun 4, 2011
I want to host 5 websites on my new virtual server so I have created 2 nameservers that point to my virtual server's IP addresses as a glue record. What confuses me is when I create a new domain on my server it gives the new domain it's own nameservers (ns1.thenewdomain.co.uk etc) do I need to change these records so they use the nameservers I created earlier? If I do? Which particular records should I change? I'm running a Unix virtual server with a Plesk control panel.
View 2 Replies
View Related
Oct 21, 2010
VERY new to linux, erm but I have an issue that needs solving!I recently moved to university, where their network blocks sftp port 22, this means that I cannot connect to my FTP server which is running a version of linux.Now I've got this ftp server connected to a seedbox and it was created using the following walk through..Code:I have written this guide for a friend, but I though it would be useful for others as well.
There are several guides floating around, but I found that most always cock up in some way. This one is tried and tested to work on Debian Etch (on an OVH rps, but should apply to most servers).If there is a new stable release of rtorrent/libtorrent then I will update this guide to show you how to update it (without reinstalling the whole server).
At the bottom there are also instructions to install ftp access & some network monitoring software.Basically, I would really like someone to be able to construct the commands on how to change the listen port for sftp connection on linux or add another port to the list that Linux would use so that I could put in through putty.
View 2 Replies
View Related
Jul 20, 2010
I tried to make "ssh tunneling", but failed and got this message.
Quote:
Administrator@windstory-PC /
$ ssh -R 7869:localhost:7869 windowsstudy@192.168.0.4
windowsstudy@192.168.0.4's password:
Warning: remote port forwarding failed for listen port 7869 Last login: Wed Jul 21 01:56:04 2010 from 192.168.0.2 -bash-3.2$
1. system environment
192.168.0.2 - windows 7 + copssh
192.168.0.4 - centos 5.4 x86 + openssh
2. Guide for setting "ssh tunneling"
[URL]
3. Added this to sshd.conf
Quote:
AllowTcpForwarding yes
4. "netstat -na|grep 7869" at 192.168.0.4
Quote:
[root:maestro:~]# netstat -na|grep 7869
tcp 0 0 0.0.0.0:7869 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:7869 127.0.0.1:53539 ESTABLISHED
[code]....
5. result of "ssh -vvv -R 7869:localhost:7869 windowsstudy@192.168.0.4"
Quote:
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
[code]....
6. I added 7869 for telnet service as follow;
Quote:
mytelnet 7869/tcp # My Telnet server
View 1 Replies
View Related
Sep 27, 2010
i have a windows domain and linux ftp server. OSs windows 2003 server and centos 5.5. i would like to integrate this file server to windows domain. And would authenticate users from windows domain.
View 4 Replies
View Related
Feb 18, 2010
I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
View 10 Replies
View Related
Jun 9, 2010
I was wondering if there is any way to enable an MS Windows client that is otherwise unable of joining a domain to join a domain controlled by (open)SUSE? Is that inability only for joining a Windows based domain but a client that runs XP Home Edition or similar domain- incapable version of Windows could join a domain if it was controlled by Linux?Pardon my newbie style, but answer doesn't have to be detailed step-by-step, just yes/no answer with some pointers would do. I am not new to linux but new to network services... search engines weren't friendly when asked this question at the search bar...
View 2 Replies
View Related
May 2, 2010
I have a mail server i need it to send message via port 587 not port 25, i make some changes to my postfix server which i use and it is already successed making a telnet to 587 port like it :
[Code]....
View 3 Replies
View Related
Apr 12, 2011
iam using centos5.2.configured qmail,vpopmail. while adding domain form vadddomain<domain.co.in> At first time domain folder get created in domains directory.and also postmaster user also get created by default.And also in mysql. Now the problem is after some times or rebooting system domain get erased automatic.also in /var/qmail/users/assign file domain name get erased.
View 1 Replies
View Related
Apr 7, 2011
i had created domain but not getting domain in /var/qmail/user/assign file.also it error /home/vpopmail/bin/vdominfo abc.co.inInvalid domain name
View 2 Replies
View Related
Feb 16, 2011
i have registered two domain names that i want to use to connect to my ubuntu server. I was wondering how to do this i was looking at bind9 but that didn't work that great. The server is behind a router with firewall i can connect to it using the external IP address but i like to use the two domain names if that is possible.
View 3 Replies
View Related
Oct 26, 2010
How to solve this:
I've installed GIMP 2.7.1 (OS Slax), but it doesn't work. Clicking on icon doesn't start GIMP.
In Shell:
kdesu /usr/bin/gimp
gimp: symbol lookup error: /usr/lib/libgegl-0.1.so.0: undefined symbol: g_dgettext
I cannot run most of apps, including mono.
View 1 Replies
View Related
Jan 8, 2010
I cannot format my Transcend 4 Gb Pen Drive.. When i try to format with the following command code...
I'm not able to format it...
dmesg gives code...
View 3 Replies
View Related
Jan 19, 2010
My hardware is-
HD-80 gb
RAM- 256 mb
I cannot install ubuntu.Which form of Linux will be favorable for me?
View 7 Replies
View Related
Jun 28, 2010
I downloaded Fedora-13-i686-Live.iso from the fedora project web site, and did the instruction on how to burn it using dvd. i used nero selecting burn a CD from an image file. after doing that, i restarted my laptop to install fedora 13 choosing to start the boot at the disk dvd but it won't boot to run the installation. instead the laptop will resume booting to its previously installed OS, fedora 9.
i browse the dvd media and there are 3 folders namely EFI, isolinux, LiveOS and GPL file.
View 9 Replies
View Related
Mar 10, 2010
in My Ubuntu host,I often use samba service to open the share fold of another computer which is WinXP .But everytime When I logout or restart the Ubuntu ,The link will lost ,I have to reconnect it again, I want to know if there is some easy way to connect it always
View 2 Replies
View Related
Nov 23, 2010
I've recently configured our mail server (postfix/dovecot). Everything is running, I have a reverse DNS, MX records, A records etc.. I've added the users already.Here is the problem, whenever I test email from an email client(Outlook 2003), there's no problem. But when try sending email from the outside the mail just bounce or deferred.
View 12 Replies
View Related
Feb 3, 2010
At work, we run Windows... Windows domain, windows workstations, etc. Today my boss asked me my thoughts on running an Ubuntu lab within the mixture of our existing Windows setup.
Well, that brought several questions to mind. So I understand you can bind an Ubuntu computer to a Windows domain, seems easy enough, whether you do it through Samba or the other guide I read that I kind of forget at the moment, but anyway...
I was just curious how Ubuntu interacts with domain users when on the windows domain. For example, if we have an Ubuntu machine on the Windows domain with a local user "administrator" and that's it, would any domain users be able to log into the Ubuntu work station, similar to how it is on Windows?
View 7 Replies
View Related
Jun 27, 2011
i need to allow window domain controller user to use file share of linux.windows DC user can see the share file and directories of linux file server but not able to access.
below is brief--
I have a Linux machine which is on my network but not on my domain. I have configured SAMBA FILESERVER for file sharing purpose. I have a Windows XP PC which is on the domain(windows server) that I am trying to connect to a share on the Linux box. I supply my credentials but regardless of which login I use I always get Logon Failure. I have created an account on the Linux machine with the same user name and password as my domain account but so far no luck. Can I connect from a domain PC to a non-domain Linux box? Is there something else I should be checking?
View 14 Replies
View Related
Dec 30, 2010
I'm working for a smallish non-profit that has gone through some recent growing pains. We have two sites that are currently without a domain controller, and no money for MS licenses, so I was thinking of trying to add a couple of additional Linux machines (we already run Linux for web services internally, and I've set up a test case previously to see if I could get a server to join the domain, which was a success) and was trying to find out if I can get them to act as Domain Controllers without replacing the domain. The main issue that I'm having at those locations is drive mappings are not happening correctly against our DFS file servers. The one other location that had this issue had it go away when we added a local DC. The domain is a Server 2008 domain.
View 2 Replies
View Related
Jun 17, 2010
I'm having a problem with eclipse, it keeps crashing while I'm working working with it, running from the terminal i found this:
# A fatal error has been detected by the Java Runtime Environment code...
i have googled and i found a ubuntu forum where a guy had the same problem, his solution was disabling the php browser, so i try to do it and go to window>preferences>General>Web browser... as soon as i click "web browser" it just crashes with the same error above, so i guess the "browser" is the problem, i didn't find the "php browser" option so that's why i click on "web browser"
if anybody has a solution for this please help me, i would be awesome to solve this.
View 11 Replies
View Related
Sep 16, 2010
how to applied permission on /etc directory. i want to deny all permission except me(owner).....is this possible?
View 1 Replies
View Related
Aug 4, 2010
I need help repairing a Grub loading error 2.
View 4 Replies
View Related
Apr 30, 2011
I am in gnome2. Nautilus always cover Conky.
View 4 Replies
View Related
Jun 29, 2010
I ran a command chown apache:apache / and just about everything... i wanted to do it on a directory but it did it on complete server.
i unable to login to phpmyadmin and even all the databses are empty. any tips on how can i solve this.
View 3 Replies
View Related
