General :: SFTP Server Port Blocked On Uni Network / Need To Change Listening Port
Oct 21, 2010
VERY new to linux, erm but I have an issue that needs solving!I recently moved to university, where their network blocks sftp port 22, this means that I cannot connect to my FTP server which is running a version of linux.Now I've got this ftp server connected to a seedbox and it was created using the following walk through..Code:I have written this guide for a friend, but I though it would be useful for others as well.
There are several guides floating around, but I found that most always cock up in some way. This one is tried and tested to work on Debian Etch (on an OVH rps, but should apply to most servers).If there is a new stable release of rtorrent/libtorrent then I will update this guide to show you how to update it (without reinstalling the whole server).
At the bottom there are also instructions to install ftp access & some network monitoring software.Basically, I would really like someone to be able to construct the commands on how to change the listen port for sftp connection on linux or add another port to the list that Linux would use so that I could put in through putty.
View 2 Replies
ADVERTISEMENT
Apr 6, 2011
I edited "sshd_config" file and changed port 22 to a new port. After I restart ssh, it listens on port 22 and the new port. How can I disable SSH to listen on port 22? I'm using Debian.
View 6 Replies
View Related
May 14, 2010
iSCSI Server, can I change the default port 3260 to other port ?
View 1 Replies
View Related
Mar 25, 2010
I have a mail server on which I would like to block port 25 on my eth0 for everyone except our external spam filter. the problem is that I want our users to be able to connect via port 10025 which is forwarded to port 25, which then is blocked...
View 2 Replies
View Related
Dec 2, 2010
My Apache is not listening on port 8080. Hence i cant access my server manager [URL]
View 2 Replies
View Related
Nov 9, 2009
I'm using iptables with modules ip_contrack_ftp to be able to use passive ftp. It works well as long as port 21 is being used as listening port. Is there any way to make it work when I configure my ftp server (vsftpd) to listen on an alternative port, lets say 21001 or something? The helper module only seems to be working properly with the standard port, so I was wondering whether there was a way to "tell it" that another port is being used? I mean, of course I make a rule in fw to allow traffic to the alternative port.
But once it's time to start passive connection, then the iptable module cannot handle it properly. I could solve the problem by making a range of passive ports in the ftp-server configuration and allow the incoming traffic to them, but then using helper modules doesn't make any sense. I just want to allow the traffic to the listening port and then want the ip_contrack_ftp module to take care of the rest. This is what I do today - but only port 21 seems to be working. Is there a way to do this with a non-standard ftp port?
View 5 Replies
View Related
Jan 28, 2011
I have Linux server (centos) in my company , Network is shared through this linux squid proxy server to Windows client .
How to open port 995 and 587 for Windows client because Outlook are not working in Windows Client ...
How to open this port for Windows Client.
View 4 Replies
View Related
Aug 14, 2009
I installed ZTE MF 626 modem in my F10 with kernel 2.6.27.12-170, i run usb_modeswitch and so far things happened normally. Watching through /var/log/messages it says that F10 detects two port device for this modem: ttyUSB1 and ttyUSB2, and in the sequence it disable port ttyUSB1 BUT Network Manager still set this port.I mean, when i connect via wvdial appointing to ttyUSB2 i get connection, but Network Manager fails to do it appointing to ttyUSB1. How to change device port in Network Manager?
View 1 Replies
View Related
Jul 7, 2010
I know that ports are, by default, not filtered; they simply don't respond to requests if there are no services listening on the port. Well, running netstat -tulpn gives:
Code:
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN -
[code]....
View 3 Replies
View Related
Jul 4, 2009
I have a fresh installation of CentOS 5 I'm using for a server, and I'm having issues with port configuration. I have iptables running, and it started with no /etc/sysconfig/iptables file. I added a few basic rules (port 53, port 10000 for webmin), saved the file, and restarted the service. I tried connecting to webmin, scanned ports, and traffic was blocked. I set iptables to allow all traffic and restarted the service, and it still showed basically every port as being blocked. It seems port 80 and port 22 work for some reason, even when I tell iptables to block all ports.
I'm not sure what's going on here. Iptables is reading the /etc/sysconfig/iptables file, and if I use lynx localhost:someport it responds as it should according to the file. However, if I try connecting by IP, it's like there's some other firewall or something running that does whatever it's configured to do.....
View 2 Replies
View Related
Mar 16, 2011
How can I find out which process is listening on a port on linux?
View 5 Replies
View Related
Jan 21, 2010
Is there a way to determine what program is listening to some port, TCP or UDP, in Linux?
View 4 Replies
View Related
Jan 20, 2010
I get today a server with CentOS.. and someone told me to block access to port 22 for all IP's except my.. so I did
Code:
iptables -A INPUT -p tcp -s my_ip --dport 22 -j ACCEPT
and after
[code]...
View 7 Replies
View Related
May 2, 2010
I have a mail server i need it to send message via port 587 not port 25, i make some changes to my postfix server which i use and it is already successed making a telnet to 587 port like it :
[Code]....
View 3 Replies
View Related
Sep 25, 2009
When I do netstat -pantu it shows a dash where the pid would be. I have also checked lsof -i and see no pid associated with the port. How do I find what program is keeping the port open?
View 1 Replies
View Related
Oct 2, 2010
I am running Ubuntu 64-bit and I have been trying to set up an ssh connection between the Ubuntu server and a Windows 7 client (using putty) and when I enter the command:
Code:
sudo netstat --inet -lpn | grep sshd
I get the following:
[code]....
View 3 Replies
View Related
Apr 7, 2011
In SuSE firewall0. I do have a openSuse 11.4 and multiple IP addresses on eth0 interface
I run (trying to/have to) multiple TOMCAT servers.
I am trying to have each tomcat instance listen to on separate IP address for example:
What i am trying to do is to redirect
a) tomcat 1 -
a) tomcat 2 -
And so on.
I know that it has to be possible.
I do have just eth0/
Is is it possible. Do I have to create "vittual interfaces"? eth0:1, .......... and do redirection ?
"Server" has got just single interface - just 1 ethernet calbe goes to that server. I am planning to have 10-15 tomcat's on that server (I have to unfortunatley) and each has to run on port 80
Is it possible to "grant" permissions to normal users to run app on port 80 - that would solve me lots of problems if impossible to redirect.
I tried to setcap 'cap_net_bind_service=+ep' /path/to/tomcat ...... but no luck
View 7 Replies
View Related
Feb 18, 2010
I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
View 10 Replies
View Related
Apr 12, 2010
I installed Ubuntu 9.10 and tomcat 6 java servlet container. I am trying to run the tomcat server on port 80, so I edited tomcat's configuration file (server.xml) and changed the default port from "8080" to "80". I launched tomcat server, went to my browser and entered:[url], but it says can not find server/location. Then I edit the server.xml and revert back to port "8080" and then enter: [url] and everything works fine. So my guess is some other service is taking up port 80, but I would think not, since I just installed Ubuntu and made sure apache isn't installed or running.
So I went to "System" --> "Administration", then choose "Network Tools". I then executed Netstat and did not see anything taking up port 80, but I do see port 8080 taken (assuming it is the tomcat server). Then I also did a Port Scan and entered my IP number. Again, I don't see port 80 taken, but do see 8080 being used.
I had a winxp laptop computer behind home wireless and was running tomcat 6 server fine with it, but it over-heated and died recently. So I got a used laptop and just installed Ubuntu 9.10. I have not changed my wireless router settings. It is the same as before. So I have ruled out my home's hardware/network equipment.
So here now I sit, wondering what is up?
For security reasons, is port 80 initially blocked by Ubuntu for some reason? Is there something I have to do beforehand to free up port 80?
View 2 Replies
View Related
Jul 11, 2010
update:
Code:
luke@media:~$ sudo service bind9 restart
* Stopping domain name service...
[code]....
View 4 Replies
View Related
Apr 27, 2010
So I set up an Ubuntu 10.04 server with apache2 installed, but for some reason I can't get to it from my browser. the iptables have all changed directories in 10.04 so I can't find the iptables. Apparmor wasn't the problem. The network hard ware is not the problem.There is something inside of 10.04 that is blocking port 80. I can ping it all day using the ip address but when I ping it useing http://ipaddress it can't find the host
View 4 Replies
View Related
Mar 28, 2011
So I have two ssh servers I connect to regularly that do not use the standard port 22, so I use the "-p" flag to connect to them. This works flawlessly EVERYWHERE except on my girlfriend's work network. When I am on that network (same laptop), I can ssh into servers which use port 22, but not the other servers on this alternate port.Is there any way OTHER than ssh'ing into a machine I can access and then ssh'ing again from there to my destination (which, by the way, does work)? I want to make a direct connection for speed and security reasons.
View 2 Replies
View Related
Jan 17, 2010
Currently Im having a syslog server that consolidate firewall logs on port 514 udp. Im also having a IDS device that I wish to push its logs to this particular syslog server so that I can retrieve my IDS logs on this server as well.
Is it possible to do so?Having syslog listening on port 514 for both firewall and IDS logs? If it is possible will the logs be recorded in a single log file?Or will it be recorded in a separate log file ie. firewall.log, IDS.log etc?? I wish to have them in separate individual log files or else there will be hard time segregating the log entries in a single file. Can anyone advice on how to achieve this??
View 2 Replies
View Related
Nov 1, 2010
i tried my best andwrite all the commands given below. but port 27000 is not in listening state.Note: I spoofed MAC address (change MAC address)on this MAchine.here is my iptables file.
# Firewall configuration written by system-config-securitylevel
# Manual customization of this file is not recommended.
*filter
[code]....
View 2 Replies
View Related
Jun 26, 2011
I am learning network prgramming in linux in c,and try to build a server and in this server I want to bind the listening socket to a paricular Ip address and port.Bind function is showing error,I did not want to use wild card. Here is the code.
#include<stdio.h>
#include<sys/socket.h>
#include<strings.h>
#include<netinet/in.h>
#include<arpa/inet.h>
#include<string.h>
[Code]...
View 2 Replies
View Related
Aug 5, 2009
If I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
View 4 Replies
View Related
May 17, 2010
Last night I installed all the updates that were available for CentOS. Today, I discovered that all connections to port 25 (Sendmail) are being blocked except connections coming from localhost.
I tried disabling the firewall to see if anything would change but it is still blocked.
If it is not the firewall doing the blocking, what else might it be?
View 4 Replies
View Related
Jul 10, 2011
Recently I discovered that we were accidentally running a POP server (port 110), when we only should have been running the encrypted version thereof (port 995). This wouldn't have been a problem if the port was blocked in the first place.Isn't the default iptables setup on CentOS to block unspecified ports? Specifically, this line from /etc/sysconfig/iptables
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
Right? Well, this doesn't seem to be working for me. I added some rules to allow additional ports and commented out a couple (crucially port 110), but for some reason, port 110 is open.Here is /etc/sysconfig/iptables and the output of iptables -L below that:
# cat /etc/sysconfig/iptables
# Firewall configuration written by system-config-securitylevel
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
[code]....
Why isn't "-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited" doing what I think it should be doing?
View 3 Replies
View Related
Jul 1, 2010
server: LAMP - debian, apache2, mysql, php5. a bit info on my network: There is a another service here that already uses port 443 already. It made my website time out, hence the move to another port. PLus, i dont want the 2 services sharing the port. What I am trying to do is forward 443 requests to another port where the SSL service is running so I can hide my port number in the URL.
Here is my sites available conf file:
Code:
NameVirtualHost *:80
NameVirtualHost *:443
NameVirtualHost *:####
[code]....
View 11 Replies
View Related
Sep 18, 2010
I can't seem to establish a conncction to my site (that I'm hosting in the same computer as the gFTP client- running Lucid Lynx desktop as a server). My site is 'out there', with a domain etc. and also I work on it with localhost. I wanted to use ftp as Joomla has a 'ftp layer' for files permissions etc. But it keeps saying that I can't connect, or the connection 'was reset by a peer' whatever that means. For 'hostname' I use site.com (site is my site's name) and even tried the whole thing like http://www.site.com (I clicke on 'connect to remote, and enter that in the url). or just put it where 'host' goes (when I'm not using localhost) For user name and pass, I just enter what I usually put to access the administrator's back panel in joomla, but maybe I am supposed to use what I use to log on to ubuntu when I start my computer? note sure. Anyway I used a telnet command in the terminal and found that port 21 was blocked. MY isp says they don't block any ports so I don't know. I was able to do this last year so I don't know what is so hard about this lol In the router, I have 'ftp 21 to 21 and ip address 192.168.1.100 (ip is the same for http which is working as I have my site up) now it seems to be open as I used a command at the terminal (found from google). It's open but my ftp still can't connect to my server either localhost or to my site. there is no firewall blocking it and I think my router is set right.
View 1 Replies
View Related
