I'm having problems loading compiz-fusion or the settings with my nvidia driver, or driver itself. Basically, I installed Arch (in vmware) then ran: pacman -Syu, pacman -S libgl xorg mesa xf86-video-vesa hal xf86-input-evdev xf86-input-mouse xf86-input-keyboard compiz-fusion alsa alsa-util nvidia I've also added a user. I'm following the wiki guide but I'm not sure where to go from here. here's the error messages:
[URL]
basically it says that my nvidia driver is incorrect or isn't configured properly. I have an Nvidia 7300gt btw, does anybody know which driver I should be using? [URL] This one should work, I'm not sure what I'm doing incorrectly. it still says $DISPLAY not set when I type startx/ccsm/fusion-icon. And alos when I run pacman -S nvidia, is it downloading version 195.36.24? [URL]
I need to uninstall kde fom pacman so I do this: When I go to "pacman -R kde" it says "checking dependencies" Then "error: failed to prepare transaction (could not satisfy dependencies) ":: kdeplasma-addons-libs: requires kdebase-workspace" So how do I fix this so that I can uninstall kde?
I don't know were this goes so I'm just gonna put it here Basically earlier today i figured i wanted to try out backtrack 4 but I could only have a maximum of 4 partitions on an hd at a time. So i deleted my partition that contained my arch home directory (didn't really have any data on it and i figured i could just make a new one later) to create an extended partition to put backtrack on. Well all went well except now when I select arch instead of backtrack i get a disk check error. This is the first part of the error, I can't exactly copy and paste it as its on my laptop. code...
I have the following scenario that doesn't seem to work normally. I have a windows 7 pc from which I am using putty to connect to my other linux servers (all running redhat 5 and 6). So here is the scenario that works and one that does not work. And I'm trying to figure out the one that does not work. Scenario that works:
From windows 7 (putty) I ssh into Linux_Server_1. echo $DISPLAY localhost:10.0
I run xclock and I see it pop up on my windows 7 pc. I am using xming on windows 7 to help me populate the display from linux to windows. One that does not work:
From windows 7 (putty) I ssh into Linux_Server_1. Then from Linux_Server_1 I ssh into Linux_Server_2. echo $DISPLAY <no output>
I try to setup $DISPLAY with localhost:10.0 or 0.0 or even my windows 7 pc ip address:0.0 ....etc Then when I try to run xclock I doesn't work.
I get these error messages: Error: Can't open display: <ip of display>
Also as a side note all our Linux servers are sitting on one subnet. My pc is sitting on another subnet. I use vpn to connect to the subnet where the servers sit from my pc.
I am using sda1 as /, which is a bootable drive. I do not know if my problem is that I did not create a /boot drive. After removing the iso dvd, I tried to reboot and I get this back: -bash: /sbin/reboot: input/output error Then it returns me to the terminal prompt.
I just did the pacman -Syu command today since i have had limited access to internet i could use with arch lately, (been tethering via droid which is only compatible in ubuntu) The command line works fine, i even reinstalled X to see if that was the problem,whenever i do startx it loads up for a second but before my xfce screen even pops up the screen blinks and blackens.
i installed arch-core-64bit or i thought i did and when i restarted it i got the error error: file not found grub rescue> i have gotten this error before and got around it buy just reinstalling the OS but now when i try to set the booting device to CD i get the same error and when i try to set it to usb i get a error saying disk error. could this be because my usb not formatted to arch's liking? well any way that's not my big problem my big problem is the fact that i do not know how to reinstall the OS i have searched for a couple days and still have no idea how to get this accomplished.
I can't my system because of this error: Code: linux-firmware: /lib/firmware/radeon/R700_rlc.bin exists in filesystem Note that in the beginning, it asks:
Code: :: Replace kernel26-firmware with core/linux-firmware? [Y/n] There are so many updates by now that the list fills in a few pages in the terminal! Also, I wonder why so many Arch updates get stuck or broken compared to almost any other distro? Is it poorly designed packages? Is it a design flaw in pacman/the package format?
I have a fresh install of OpenSUSE 11.4 64bit and I have installed the AMD Display drivers for my Radeon HD 5970. Everything seems to be working quite well. I have a multiple monitor setup (1280x1024 monitor and a 1920x1080 monitor).
I have my primary display set to 1920x1080, however when I try to enable the second display, I get a CRTC error that the display is over the maximum (1920x1920). If I enable both monitors at lower resolutions, there is no problem.
I have done a fair bit of reading and have been unable to determine where this maximum is set, or how to change it. I'd like to be able to run both monitors at their native resolutions.
after installing thunderbird my computer was unable to load linux (fedora 13) while loading it reaches the blue screen with logo and halts. it didnt respond to any button. then i went to a single user by Ctrl+Alt+F1 because im a total newbie and thinking that video driver is missing, i installed nvidia using yum! but the problem remains. now entering startx gives:
API mismatch: the nvidia kernel module has version 195.36.24, but this nvidia driver component has version 260.19.12. there is always this error: no display specified/etc/X11/xorg.cof file has Driver "nvidia" in the Section "Device", but it is supposed to be "nv", because it was so previously. manually editing this doesnt help.
1). is it possible to "unyum" what i did and get back the driver i used to have? 2). how can i get the display working? 3). were there any known to you cases when thunderbird could mess up display drivers?
I tried to connect to remote server ,which is installed Centos 5.4 x86, through Xmanager on windows 7, and got this error.
Quote:
/usr/bin/xterm Xt error: Can't open display: %s
At the remote server, I turned on firewall and after this I got the above-mentioned error message. I do this accrding to instruction on remote server.
Quote:
2. Firewall (TCP/UDP Ports) Configuration Open UDP port 177 from the PC to the remote host direction. Open incoming TCP ports 6000~6010 from the remote host to your PC. After adding these ports "/etc/sysconfig/iptable" as the enoder mentioned, /etc/init.d/iptables restart
3. Reboot the remote host and start Xmanager <- I could not restart remote server.
I recently moved from ubuntu to arch, upon installing it I realized it was command line based :S How can I get a GUI and make it look nice? I tried following this guide, but I dont even know what im doing.
My Arch Linux can't update for over a few weeks now! It just says that everything is up to date and quits. But I hardly believe there weren't any updates, before there were a few updates a day!
I also had ever tried all methods they mentioned, but my problem is still there. I am using a MAC OS X 10.6 ssh a remote redhat server. I hope to see X of redhat on my own MAC. Below is what I've done: 'MAC_ip' stands for my mac; 'redhat_ip' stands for redhat server.
1) ssh to redhat server 2) change to root 3) type command: DISPLAY=MAC_ip:0.0 4) type command: export 5) Back to MAC 6) change to root 7) type command: xhost +Redhat_ip 8) vim /etc/ssh_config, add X11Forwarding yes 9) Back to redhat, type: xclock
I got below message: Error: Can't open display: MAC_ip:0.0 I also tried some methods to login as others suggested:
On a new Dell Lattitude e6400, I have installed both arch and Ubuntu. Ubuntu recognized wifi and ethernet right away and connected and is working fine, but in arch, I am having more problems then I usually do when using arch. From the output of lspci the ethernet is a intel device 1502, I have researched this and found it to need the e1000e module as its driver. I modprobed this module sucessfully, but no ethernet. With wlan, i have found that the card is a DW1501 Wireless-N WLAN Half-Mini Card that has a broadcom 4727 chip in it. I downloaded the windows driver for this chip and isntalled it with ndiswrapper but this did not help. What I think is the root of the problem is the error message that restarting networking creates.
Quote:
Dell only supplies drivers for ubuntu, but it should still be possible to get this to work. I have tried booting various live distros that I had drives for and I found that the parted magic boot disk saw the ethernet port and was able to connect to ethernet, and that the ubuntu live disk was able to connect to both wifi and ethernet. Somehow they must be seeing the prescense of the hardware in a way that I have not tried with arch. Please help, I really need to get this computer workign with arch.
I noticed that the clock in the FVWM taskbar displays UTC instead of my local time. And when I execute the date command, it shows the time zone as UTC. I wonder how to set it to display my local time zone?
The first problem is that I cannot use the Arch repository. Every time I try to, it brings up a "no address record" error. I have configured my network interface properly and can ping www.google.com and receive a whole load of crap. Definitely working. Whats wrong?
The second problem is that the boot-up process hangs for a very long time at "Starting Network." This make my boot of Arch just as slow as *buntu! WTF? Whats wrong there? Aside from that, I am unhappy that my Ethernet card is not detected but thats another question. The only ting I am pleased with right now is the speed of the system, and the fact that I used 4 different file systems on 7 different partitions without a hitch.
java version "1.6.0_15" Java(TM) SE Runtime Environment (build 1.6.0_15-b03) Java HotSpot(TM) 64-Bit Server VM (build 14.1-b02, mixed mode)
And when i am trying to run my gameserver scripts i get this error.
root:~# /home/l2jserver/login # ./L2JConfig.sh Exception in thread "AWT-EventQueue-0" java.awt.HeadlessException: No X11 DISPLAY variable was set, but this program performed an operation which requires it.
at java.awt.GraphicsEnvironment.checkHeadless(GraphicsEnvironment.java:159) at java.awt.Window.<init>(Window.java:431) at java.awt.Frame.<init>(Frame.java:403)
[code]....
This is not my desktop computer but my remote server.
Even if im logged into root I cant edit or view any files. Like if I type /etc/rc.conf in Arch it, says "permission denied" so how do I edit this file cuz I need to put gdm and dbus in my daemons
i'm looking for people that play LAN games under linux that would also be interested in producing an easy to use gaming distro that pre-scripts the installation of many popular wine-compatible windows games (plus those games that are cross-platform) all with the click of the mouse, my thoughts are
I installed pyxattr to play around with, and when I try to set them it says that the operation is not supported. Does Arch Linux not support xattr, or how do I enable them?
I just install arch linux yesterday. And I have an issue with the wireless connection. I can see wireless connections, when i click on thet networkmanager. But I cannot connect. If I remove WPA or any security from the wireless connection(from my wifi router) I can connect to wireless network without any issue. But when there is any security is involved to the connection it does not connect. How to connect to wireless. I've been using debian for a long time, but there was no any issue with this connecting thing. I am new to arch linux.
Its been since October since I accessed my Arch OS, due to a career and phical move. Since that time I forgot my username and password (including root).My question is, is there a way to get around it without starting from scratch? Oh yeah, mbackup live CD is 700 miles away! lol I can only guess what the answer is going to be.
I am using Squid Server from last 5years. There is a site "http://www.firstflight.net", which was accessible before few days but now I am unable to access this site. If I use IE8 then getting below error:
"Internet Explorer cannot display the webpage"
Or using Google chrome getting error:
"This webpage is not available The webpage at http://www.firstflight.net/ might be temporarily down or it may have moved permanently to a new web address. Error 330 (net::ERR_CONTENT_DECODING_FAILED): Unknown error."
I have installed Arch and all is well. startxfce4 gives me a working desktop but when I log out, everything fails. The monitor goes black and I can't get into another tty. I have to power off the computer the "wrong" way and boot again.
The video card is an Intel 82845G/GL Brookdale integrated.
I'm trying to install the "kernel26-headers" package in Arch so I can (try to) compile the Intel 865G graphics drivers from off their website (I can't get H/W acceleration working with xf86-video-intel, but I know the thing has a GPU, because if I boot a Knoppix CD that I have, it enables Compiz by default, and it works damn well).
Any time I try "pacman -S kernel26-headers" I just get a bunch of errors spat back at me code...
Now, I have tried enabling all the US mirrors (HTTP and FTP), and I have even tried a couple of FTP servers in Canada and even Great Britain. None of them seem to work at all!
