I noticed that the clock in the FVWM taskbar displays UTC instead of my local time. And when I execute the date command, it shows the time zone as UTC. I wonder how to set it to display my local time zone?
View 2 RepliesCan anyone explain why a 64 bit kernel builds a bzImage in both arch/x86 and arch/x86_64- is there a difference between the two?
View 2 Replies View RelatedI just did the pacman -Syu command today since i have had limited access to internet i could use with arch lately, (been tethering via droid which is only compatible in ubuntu) The command line works fine, i even reinstalled X to see if that was the problem,whenever i do startx it loads up for a second but before my xfce screen even pops up the screen blinks and blackens.
View 7 Replies View RelatedI recently moved from ubuntu to arch, upon installing it I realized it was command line based :S How can I get a GUI and make it look nice? I tried following this guide, but I dont even know what im doing.
View 14 Replies View RelatedI'm using a very simple conky script to diplay the date and time on my desktop. I've noticed that he conky clock is a few seconds early compared to the time displayed in the right hand side of the top panel (Natty). I guess both displays are based on the same "internal" time, so I'm left wondering how this could happen, and how to sync back the clocks.
It seems that Conky is in sync with the system date, while the panel clock is 2 seconds late (on my system). Checked with while true; do date; sleep 0.1; done
Just curious as to if it is possible to have the clock in the center of the task bar centered clock in Ubuntu 11.04?
View 1 Replies View RelatedMy Arch Linux can't update for over a few weeks now! It just says that everything is up to date and quits. But I hardly believe there weren't any updates, before there were a few updates a day!
View 3 Replies View RelatedDoes anyone know of an interface to a quartz clock that can be used for a TOD clock?? I want to interface it to an Arduino board. Can be GPIO or USB.
View 1 Replies View RelatedI had cloned a centos 5.6 installation from virtualbox virtual machine to physical box. Everything work fine. However, the time showing in os using date command differs from bios time by roughly 4 hours. I am running ntp services which sync the time with another centos server on the network. It appears that some services are using virtual clock and some use physical clock. How do I get rid of virtual clock and only use physical clock?
View 1 Replies View RelatedOn a new Dell Lattitude e6400, I have installed both arch and Ubuntu. Ubuntu recognized wifi and ethernet right away and connected and is working fine, but in arch, I am having more problems then I usually do when using arch. From the output of lspci the ethernet is a intel device 1502, I have researched this and found it to need the e1000e module as its driver. I modprobed this module sucessfully, but no ethernet. With wlan, i have found that the card is a DW1501 Wireless-N WLAN Half-Mini Card that has a broadcom 4727 chip in it. I downloaded the windows driver for this chip and isntalled it with ndiswrapper but this did not help. What I think is the root of the problem is the error message that restarting networking creates.
Quote:
Dell only supplies drivers for ubuntu, but it should still be possible to get this to work. I have tried booting various live distros that I had drives for and I found that the parted magic boot disk saw the ethernet port and was able to connect to ethernet, and that the ubuntu live disk was able to connect to both wifi and ethernet. Somehow they must be seeing the prescense of the hardware in a way that I have not tried with arch. Please help, I really need to get this computer workign with arch.
How to install Xorg in Arch Linux? I am writing this from the command-line Links browser.
View 14 Replies View RelatedI'm having problems loading compiz-fusion or the settings with my nvidia driver, or driver itself. Basically, I installed Arch (in vmware) then ran: pacman -Syu, pacman -S libgl xorg mesa xf86-video-vesa hal xf86-input-evdev xf86-input-mouse xf86-input-keyboard compiz-fusion alsa alsa-util nvidia I've also added a user. I'm following the wiki guide but I'm not sure where to go from here. here's the error messages:
[URL]
basically it says that my nvidia driver is incorrect or isn't configured properly. I have an Nvidia 7300gt btw, does anybody know which driver I should be using? [URL] This one should work, I'm not sure what I'm doing incorrectly. it still says $DISPLAY not set when I type startx/ccsm/fusion-icon. And alos when I run pacman -S nvidia, is it downloading version 195.36.24? [URL]
The first problem is that I cannot use the Arch repository. Every time I try to, it brings up a "no address record" error. I have configured my network interface properly and can ping www.google.com and receive a whole load of crap. Definitely working.
Whats wrong?
The second problem is that the boot-up process hangs for a very long time at "Starting Network." This make my boot of Arch just as slow as *buntu! WTF? Whats wrong there? Aside from that, I am unhappy that my Ethernet card is not detected but thats another question. The only ting I am pleased with right now is the speed of the system, and the fact that I used 4 different file systems on 7 different partitions without a hitch.
Even if im logged into root I cant edit or view any files. Like if I type /etc/rc.conf in Arch it, says "permission denied" so how do I edit this file cuz I need to put gdm and dbus in my daemons
View 2 Replies View Relatedi'm looking for people that play LAN games under linux that would also be interested in producing an easy to use gaming distro that pre-scripts the installation of many popular wine-compatible windows games (plus those games that are cross-platform) all with the click of the mouse, my thoughts are
[Code]...
I installed pyxattr to play around with, and when I try to set them it says that the operation is not supported. Does Arch Linux not support xattr, or how do I enable them?
View 10 Replies View RelatedI just install arch linux yesterday. And I have an issue with the wireless connection. I can see wireless connections, when i click on thet networkmanager. But I cannot connect. If I remove WPA or any security from the wireless connection(from my wifi router) I can connect to wireless network without any issue. But when there is any security is involved to the connection it does not connect. How to connect to wireless. I've been using debian for a long time, but there was no any issue with this connecting thing. I am new to arch linux.
View 18 Replies View RelatedIts been since October since I accessed my Arch OS, due to a career and phical move. Since that time I forgot my username and password (including root).My question is, is there a way to get around it without starting from scratch? Oh yeah, mbackup live CD is 700 miles away! lol I can only guess what the answer is going to be.
View 6 Replies View RelatedI have installed Arch and all is well. startxfce4 gives me a working desktop but when I log out, everything fails. The monitor goes black and I can't get into another tty. I have to power off the computer the "wrong" way and boot again.
The video card is an Intel 82845G/GL Brookdale integrated.
Not sure what to do next.
I'm trying to install the "kernel26-headers" package in Arch so I can (try to) compile the Intel 865G graphics drivers from off their website (I can't get H/W acceleration working with xf86-video-intel, but I know the thing has a GPU, because if I boot a Knoppix CD that I have, it enables Compiz by default, and it works damn well).
Any time I try "pacman -S kernel26-headers" I just get a bunch of errors spat back at me code...
Now, I have tried enabling all the US mirrors (HTTP and FTP), and I have even tried a couple of FTP servers in Canada and even Great Britain. None of them seem to work at all!
Is there any way I can get this package?
Yesterday I tried running pacman -Syu to update my system, but the cups package keeps conflicting and stops the whole process. This is what happens when I try to just upgrade cups:
Code:
$ sudo pacman -S cups
Password:
resolving dependencies...
looking for inter-conflicts...
[Code].....
I was wondering if anyone can tell me what file, etc is the equivalent of ARCH's /etc/rc.sysinit? I need to know this because I am having many problems making the new nfluxos iso's for ARCH because of how ARCH now mounts stuff at bootup
due to whatever changed in udev or udisks or something else in ARCH now, when I make the system into a livecd it doublemounts everything when booting for example; output of "mount" in nfluxos with 3.4squashfs udev 151
Code:
[root@nfluxos ~]# mount
rootfs on / type rootfs (rw)
aufs on / type aufs (rw,relatime,si=4ce08f22,nowarn_perm)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
[Code]...
I am new to Slackware and I am wondering how you set the ARCH variable. On the multilib wiki page it says:
"Rather than editing the script and change/remove CFLAGS definitions, you can set the ARCH to 'x86_64' and save yourself some time."
So from this I understand that they advise against editing the Slackbuild script. How do I set the ARCH variable on the command line or is it a configuration file I need to edit? I am running Slackware 13.1 64.
I have a server running ArchLinux; I recently installed openntpd on it. Since I started paying closer attention to the clock, I started noticing other things; specifically when I run the "date" command, it's returned in PST when it should be "EST":
[spice@sandbox ~]$ date
Sat Mar 6 00:17:42 PST 2010
I have set the hwclock to localtime, configured "HARDWARECLOCK" to "localtime" in rc.conf, and chosen two different (but accurate) values for TIMEZONE in rc.conf:
[spice@sandbox ~]$ hwclock
Sat 06 Mar 2010 03:17:38 AM PST -0.922220 seconds
[spice@sandbox ~]$ cat /etc/rc.conf | grep TIMEZONE
TIMEZONE="US/Eastern"
[spice@sandbox ~]$ cat /etc/rc.conf | grep HARDWARE
HARDWARECLOCK="localtime"
However, as you can see, "hwclock" and "date" both say they're showing PST, although hwclock is showing the time in EST. I am not sure whether this was the case before installing openntpd. Is there another place where I should be setting the time zone?
I need to uninstall kde fom pacman so I do this: When I go to "pacman -R kde" it says "checking dependencies" Then "error: failed to prepare transaction (could not satisfy dependencies) ":: kdeplasma-addons-libs: requires kdebase-workspace" So how do I fix this so that I can uninstall kde?
View 1 Replies View RelatedSince new kernel 3.0 update I cannot rebuild vmware modules
Quote:
sudo vmware-modconfig --console --install-all Unable to initialize kernel module configuration
how to do that. Where do I insert the "CONFIG_LOCALVERSION" line.
Quote:
Same here. This seems to be due to the kernel version being "3.0" instead of "3.0.0". Recompiling the Kernel (and all modules based on it, e.g. nvidia) with
CONFIG_LOCALVERSION=".0-ARCH" allows me to compile the modules and run VMware.
When I type the command
Code:
startvnc
I get the following error
[code]....
I have installed the most basic Arch Linux only with command line interface as guest OS on Windows using VMware. The problem is when I maximize the Vmware window, the Arch Linux console does not adjust to the full screen. How to do this without installing X window?
I also want to make copy-paste work to and fro from windows without installing X. Is it possible?
I've come from Fedora and am trying out Arch Linux. I was wondering if the packager 'pacman' contains funcionality like that provided by 'yum whatprovides': provides or whatprovides Is used to find out which package provides some feature or file. Just use a specific name or a file- glob-syntax wildcards to list the packages available or installed that provide that feature or file.
View 1 Replies View RelatedWarning: Do not edit /etc/sudoers directly with an editor; Errors in syntax can cause annoyances (like rendering the root account unusable). You must use the visudo command to edit /etc/sudoers. In the previous section we added your user to the "wheel" group. To give users in the wheel group full root privileges when they precede a command with "sudo", uncomment the following line:
%wheelALL=(ALL) ALL
so i signed in as root and typed in visudo now i alreayd made the changes but how do i exit and save super+x doesnt seem to do it for me since im not using nano and not supposed to cause it causes errors