General :: API Mismatch: Nvidia - Error: No Display Specified
Nov 27, 2010
after installing thunderbird my computer was unable to load linux (fedora 13) while loading it reaches the blue screen with logo and halts. it didnt respond to any button. then i went to a single user by Ctrl+Alt+F1 because im a total newbie and thinking that video driver is missing, i installed nvidia using yum! but the problem remains. now entering startx gives:
API mismatch: the nvidia kernel module has version 195.36.24, but this nvidia driver component has version 260.19.12. there is always this error: no display specified/etc/X11/xorg.cof file has Driver "nvidia" in the Section "Device", but it is supposed to be "nv", because it was so previously. manually editing this doesnt help.
1). is it possible to "unyum" what i did and get back the driver i used to have? 2). how can i get the display working? 3). were there any known to you cases when thunderbird could mess up display drivers?
View 3 Replies
ADVERTISEMENT
Jun 11, 2010
I was creating an OpenGL+GLUT+Perl Simulator, and I got this error on starting it:
Error: API mismatch: the NVIDIA kernel module has version 195.36.15, but this NVIDIA driver component has version 195.36.24. make sure that the kernel module and all NVIDIA driver components have the same version. The app still works fine, but I have no clue what to do about this.
View 1 Replies
View Related
Jun 19, 2010
I attempted to run amarok from the menu and found it would never start there was no activity, I then tried to start it from the command line and I recieved this error..
Version mismatch detected between the NVIDIA libGL.so
and libGLcore.so shared libraries (libGL.so version:
195.36.31; libGLcore.so version: 195.36.24).
Please try reinstalling the NVIDIA driver.
This is a fresh install of Fedora 13, the kmod-nvidia drivers were just fixed I assume cause I tried to install them for a few days and they would fail. Well I guess they finally fixed the Nvidia drivers for 2.6.33.5-124.fc13.x86_64 but it has broken amarok..
View 4 Replies
View Related
Aug 6, 2010
I'm running RHEL 5. When using the GUI System>Administration>Users and Groups, I get the error: The user database cannot be read. This problem is most likely caused by a mismatch between /etc/passwd and /etc/shadow or /etc/group and /etc/gshadow. The program will exit now.
Some research showed that I need to use vipw and vigr respectively to find an inconsistency between these two sets, which I did - to make it easy I copied each from [vipw | vigr] to an excel file and did =exact(%1, %2). There are no inconsistencies.
[Code]...
View 1 Replies
View Related
Jun 28, 2011
I have the following scenario that doesn't seem to work normally. I have a windows 7 pc from which I am using putty to connect to my other linux servers (all running redhat 5 and 6). So here is the scenario that works and one that does not work. And I'm trying to figure out the one that does not work. Scenario that works:
From windows 7 (putty) I ssh into Linux_Server_1.
echo $DISPLAY
localhost:10.0
I run xclock and I see it pop up on my windows 7 pc. I am using xming on windows 7 to help me populate the display from linux to windows. One that does not work:
From windows 7 (putty) I ssh into Linux_Server_1. Then from Linux_Server_1 I ssh into Linux_Server_2.
echo $DISPLAY
<no output>
I try to setup $DISPLAY with localhost:10.0 or 0.0 or even my windows 7 pc ip address:0.0 ....etc Then when I try to run xclock I doesn't work.
I get these error messages: Error: Can't open display: <ip of display>
Also as a side note all our Linux servers are sitting on one subnet. My pc is sitting on another subnet. I use vpn to connect to the subnet where the servers sit from my pc.
View 4 Replies
View Related
Mar 3, 2011
I have been getting a Hash Sum mismatch error on certain packages since Debian Squeeze became stable,
[Code]...
E: Some index files failed to download. They have been ignored, or old ones used instead.
View 6 Replies
View Related
Jul 12, 2010
we have postgresql database in our server. when i tried to install our application it throws some error like "org.postgresql.util.PSQLException: ERROR: encoding UTF8 does not match locale en_US Detail: The chosen LC_CTYPE setting requires encoding LATIN1". the locale which is set in our server is
[code]...
I don't know how to approach to solve this error.
View 1 Replies
View Related
Jul 9, 2015
Im trying to update the system packages list by doing "aptitude update", but I got a error like this:
W: Failed to fetch http://download.virtualbox.org/virtualb ... 4/Packages: Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
E: Couldn't rebuild package cache
After searching the Web, I saw that many foruns seems to suggest to erase the reference list of packages using the command " rm -rf /var/lib/apt/lists/" and then run "aptitude update" again. I did that but the error still pops up.
My source.list:
### Debian Jessie
deb http://ftp.us.debian.org/debian/ jessie main contrib non-free
deb-src http://ftp.us.debian.org/debian/ jessie main contrib non-free
deb http://security.debian.org/ jessie/updates main contrib non-free
deb-src http://security.debian.org/ jessie/updates main contrib non-free
[Code] ....
View 7 Replies
View Related
Jul 14, 2015
Lately I have noticed when I am trying to install something I have been getting 'Hash Sum mismatch'
Here is an example when I tried to install Calibre:
root@V-debian:/etc/apt# apt install calibre
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]....
View 10 Replies
View Related
Apr 4, 2011
I have tried installing skype through synaptic package manager, downloading from website through software centre and also manually using apt-get and dpkg. All I get is the same error - hash sum mismatch so file could not be retrieved. have tried the apt-get update and makes same error. not entirely certain what the --fix missing does or how to run it.
Get:1 [URL] [20.2MB]
Fetched 20.2MB in 6min 31s (51.5kB/s)
Failed to fetch [URL] Hash Sum mismatch
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? I just done successful install for Opera and Thunderbird. just this skype thing I can't seem to sort!
View 2 Replies
View Related
Nov 29, 2010
When I try to update my software through update manager, I get this error:
W: Failed to fetch [URL] Size mismatch
As a side note, when I enter Update Manager, it does not show 10.10 as an available update. I have checked my settings. I am quite kurfluddled by all of this.
View 7 Replies
View Related
Mar 1, 2011
uname -r prints 2.6.18-164.el5
Yum install kernel-headers/kernel-devel gives me 2.6.18-194
When trying to run virtualbox I get an error:
Kernel Driver not installed: (rc=-1908)
Please reinstall the kernel module by running "/etc/init.d/vboxdrv setup" as root...
/etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules [OK]
Uninstalling old VirtualBox DKMS kernel modules [OK]
Trying to register the VirtualBox kernel modules using DKMS
Error! Your kernel headers for kernel 2.6.18-164.el5 cannot be found at /lib/modules/2.6.18-164.el5/build or /lib/modules/2.6.18-164.el5/source. [FAILED]
(Failed, trying without DKMS)
Recompiling VirtualBox kernel modules [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
I'm assuming the setup program is using the output from uname -r to determine the kernel, the problem is the kernel sources I've got from yum do not jibe with the uname value.
View 4 Replies
View Related
Feb 15, 2010
I frequently watch movies on my computer, but I have two screens. So having something displayed on the other monitor is annoying.
I currently use this to turn off my monitors:
xset dpms force off
I was wondering if there's any way to turn off monitors independently, without having to physically press a button on the monitor, of course.
A program that tells the other monitor to display nothing but black would suffice, but I'd really prefer not to waste the power.
I also have Nvidia TwinView, so applications like grandr aren't aware of both monitors as being independent.
View 1 Replies
View Related
Mar 15, 2010
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
View 2 Replies
View Related
Apr 15, 2010
Normally I use disper to enable my external monitor, but I don't think I can force the 2nd monitor to be primary. [URL]
I've played around with nv-control-dpy included in the nvidia-control source, but I haven't figured out how to do it yet. How to get: [URL]
This is a laptop, to which I connect an external hdmi display when I get to work. dipser -e extends the desktop for me, but the laptop remains the primary desktop (holding the panels etc). nvidia-settings can set primary monitor for me, but I want to use the cli.
View 4 Replies
View Related
Aug 12, 2010
I am running fedora Fedora 2.6.31.5-127.fc12.i686 - works fine, but it puts my display adapter in old fashoned simple vga mode.
DISTRIBTION
Fedora 2.6.31.5-127.fc12.i686
Mysql 5.1.47
Apache 2.2.15
CONFIGURATION
1.25 ghz AMD athlon
NVIDIA RIVA TNT display adapter
ECS K7S5a board / chipset
AMD BIOS 07.00T
512 mb main mem
128 kb primary cache
256 2ndary cache
66 mhz bus clock
I use the bios to dual boot between two disks, (1) this op sys and (2)win98se - where I have a driver that fully supports the nvidia.
The disadvantage to my current situation is that there are some programs - eg Evolution - that assume I can see more than you see with this setup - eg the buttons at the bottom of the screen do not appear and i have to do a trial and error tabbing to get what i want. I just downloaded openoffice and i see that it wants 1000x2000 or so. Thus I wont even try to install it unless i can resolve the adapter thing.
I'm very happy with this fedora - use it for software development. But as I become more fond of it, I would like to use it instead of windows - which I can't unless i can see the whole screen
At one point - in response to a suggestion that I download security updates - I did so and got 2.6.32.12-115.fc12.i686. It was incompatible with my config - put up a screen that looked like a tv test pattern and went into a loop. So I went back to 2.6.31.5-127.fc12.i686.
View 8 Replies
View Related
Apr 13, 2011
I'm tring to run AMDOverdriveCtrl, since they don't have an RPM file for Fedora i tried to compile from source i followed the instruction in the readme files run the make command
Code:
% make
g++ -mwindows -s -pthread -lwx_gtk2u_richtext-2.8 -lwx_gtk2u_aui-2.8 -lwx_gtk2u_xrc-2.8 -lwx_gtk2u_qa-2.8 -lwx_gtk2u_html-2.8 -lwx_gtk2u_adv-2.8 -lwx_gtk2u_core-2.8 -lwx_baseu_xml-2.8 -lwx_baseu_net-2.8 -lwx_baseu-2.8 -ldl -o./Release/AMDOverdriveCtrl ./src/CFanSpeedPanel.o ./src/COvdrSettingsPanel.o ./src/CFanControlPanel.o ./src/CColorTempPanel.o ./src/BezierMath.o ./src/Color.o
[code]....
and tried to run the application, and i get this error message
Code:
$ AMDOverdriveCtrl
Fatal Error: Mismatch between the program and library build versions detected.
The library used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.4,compatible with 2.6), and your program used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.6).
View 1 Replies
View Related
Apr 5, 2011
whenever I try to open my repo's I get the following error message
Code: There were errors while restoring the repository configuration.Parse error: repoindex.xml[12] Opening and ending tag mismatch: meta line 11 and head does any one know what that means...
View 9 Replies
View Related
Jan 14, 2011
Recently installed OpenSuse 11.3 on my system, Setup dual monitors w/ the latest Nvidia driver from Yast repo : download.nvidia.com
Initially twin view ( same desktop viewed on both monitors ) worked no problem
Once xinorama was enabled to extend the one desktop across both I encountered a mouse issue.
Main monitor is on the right, 2ndary on the left... When I drag the mouse from the right monitor over to the lest.. the cursor appears to get stuck on the left monitor's right hand edge.. it flickers as i move it around...
If I drag the mouse to the right a few whole mousepad lengths it will come back to the right...its like fighting to bring it back..
View 1 Replies
View Related
Feb 21, 2011
When I run df command, the sum of free and used space doesn't tally up to total space. Now I found an explanation in this thread: URL...The amount of "reserved" space seems a little too high as OP of the thread had commented, but may be that's what needed. Now my question is is there a way to change/specify this amount of "reserved" space manually?Also is there a way where you can see the actual disk usage for every mounted partition including the hidden "reserved" space? Because sometimes this mismatch makes the output of df very confusing!
I am attaching output of df, and fdisk from my NFS server. The amount of reserved space seems to be close to 5% of the total partition size.
View 3 Replies
View Related
Feb 9, 2010
I've made several attempts to install GIMP 2.7 (by compiling) to get layer group functionality, but the results were too buggy and I'd like to go back to 2.6. I installed gimp 2.6 again via apt-get, but it won't load, giving the error:
Code:
Libgimp version mismatch!
The GIMP binary cannot run with a libgimp version
[code]....
View 9 Replies
View Related
Apr 16, 2011
I have a fresh install of OpenSUSE 11.4 64bit and I have installed the AMD Display drivers for my Radeon HD 5970. Everything seems to be working quite well. I have a multiple monitor setup (1280x1024 monitor and a 1920x1080 monitor).
I have my primary display set to 1920x1080, however when I try to enable the second display, I get a CRTC error that the display is over the maximum (1920x1920). If I enable both monitors at lower resolutions, there is no problem.
I have done a fair bit of reading and have been unable to determine where this maximum is set, or how to change it. I'd like to be able to run both monitors at their native resolutions.
View 3 Replies
View Related
May 24, 2010
I'm having problems loading compiz-fusion or the settings with my nvidia driver, or driver itself. Basically, I installed Arch (in vmware) then ran: pacman -Syu, pacman -S libgl xorg mesa xf86-video-vesa hal xf86-input-evdev xf86-input-mouse xf86-input-keyboard compiz-fusion alsa alsa-util nvidia I've also added a user. I'm following the wiki guide but I'm not sure where to go from here. here's the error messages:
[URL]
basically it says that my nvidia driver is incorrect or isn't configured properly. I have an Nvidia 7300gt btw, does anybody know which driver I should be using? [URL] This one should work, I'm not sure what I'm doing incorrectly. it still says $DISPLAY not set when I type startx/ccsm/fusion-icon. And alos when I run pacman -S nvidia, is it downloading version 195.36.24? [URL]
View 9 Replies
View Related
Jan 27, 2010
I have a server and a few clients set up with LDAP and NFS. All user files and logins are on the server, and I can login as a normal user on any client and get to my files. However, if I log in as root on a client, I can't write in root-owned directories on the NFS. I suppose that client-root and server-root are different.
Question: is there some way to convince the LDAP or that client-root and server-root are the same?
View 3 Replies
View Related
Jan 17, 2011
I am trying to compile and install a new kernel. I have downloaded the 2.6.37 version from kernel.org and I have extracted it in usr/src/linux-2.6.37/ folder.I have tried to compile it and install it according to the instruction given in the following web site and which I found very useful:ttp://www.digitalhermit.com/linux/K...WTO.html#INTRONevertheless, I am encountering some problems during the make install modules process as I get some warnings (i.e. The title of this post).I thought to ignore the warnings and continue by copying the modules in /lib/modules/linux-2.6.37 but this is not possible since at that directory there is no folder created with the new kernel I am trying to install and thus I get a msg saying: FATAL: could not load /lib/modules/2.6.37/modules.dep.
The warning message: WARNING: modpost: found X section mismatch(es) suggests to run a make CONFIG_DEBUG_SECTION_MISMATCH=y.At the moment I am running a make again and saving the output to a file so that I can see later on what are the mismatches that I get. In any case we are talking about more than 50 mismatches so I am wondering if these mismatches are not that serious and the problem I cannot install and copy the modules is something else
View 1 Replies
View Related
Feb 17, 2010
I have installed RHEL 4.6. But X server is not running. Wen i executed xclock Error: Can't open display: hostnmae:0.0
View 4 Replies
View Related
Oct 25, 2010
/usr/bin/xterm Xt error: Can't open display: %s
I tried to connect to remote server ,which is installed Centos 5.4 x86, through Xmanager on windows 7, and got this error.
Quote:
/usr/bin/xterm Xt error: Can't open display: %s
At the remote server, I turned on firewall and after this I got the above-mentioned error message.
I do this accrding to instruction on remote server.
Quote:
2. Firewall (TCP/UDP Ports) Configuration
Open UDP port 177 from the PC to the remote host direction.
Open incoming TCP ports 6000~6010 from the remote host to your PC.
After adding these ports "/etc/sysconfig/iptable" as the enoder mentioned, /etc/init.d/iptables restart
3. Reboot the remote host and start Xmanager <- I could not restart remote server.
View 14 Replies
View Related
Mar 31, 2011
I also had ever tried all methods they mentioned, but my problem is still there. I am using a MAC OS X 10.6 ssh a remote redhat server. I hope to see X of redhat on my own MAC. Below is what I've done: 'MAC_ip' stands for my mac; 'redhat_ip' stands for redhat server.
1) ssh to redhat server
2) change to root
3) type command: DISPLAY=MAC_ip:0.0
4) type command: export
5) Back to MAC
6) change to root
7) type command: xhost +Redhat_ip
8) vim /etc/ssh_config, add X11Forwarding yes
9) Back to redhat, type: xclock
I got below message: Error: Can't open display: MAC_ip:0.0 I also tried some methods to login as others suggested:
[Code]....
View 10 Replies
View Related
Apr 15, 2011
I'm running Ubuntu 10.10 on a Dell m65 mobile precision laptop w/ nNvidia card.
I booted up my system. Login screen appears. I login. I can hear the login sounds. I can hear my notifications telling me I have email. My mouse works. My keyboard works. But I don't see my desktop. All that's in front of me is the background that I had at login time. I don't see the panels nor the desktop icons. I don't see the interactive grouping/stretchy rectangle thingy when clicking and dragging on the desktop.
I've never experienced this before. I never had a problem w/ this before. I had always been running in hi-res mode.
I did update my system earlier this morning and it wasn't until this afternoon I had to reboot it.
These are the things I've tried, none of which worked.
1) Downgraded my nVidia driver version
2) Changed the xorg.conf to a generic version with basic resolution (I had been running 1900x1200)
3) Tried restarting nautilus. I did this from the command prompt. I just get "Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon.
4) Tried an older kernel
5) Turned off compiz
These are the things I've tried and they do work
1) Boot to recovery menu. Run in failsafeX mode. I can see my desktop but everything is huge.
2) Run Desktop Edition (Safe Mode). I can see my desktop but everything is huge. I also notice that my desktop icons had been moved around. I think I was doing this when I couldn't see them!!
3) When in Safe Mode, I can configure my nVidia settings to be hi-res. But I can't these settings to stick when booting to normal mode.
View 6 Replies
View Related
Dec 25, 2009
my java version is this
java version "1.6.0_15"
Java(TM) SE Runtime Environment (build 1.6.0_15-b03)
Java HotSpot(TM) 64-Bit Server VM (build 14.1-b02, mixed mode)
And when i am trying to run my gameserver scripts i get this error.
root:~# /home/l2jserver/login # ./L2JConfig.sh Exception in thread "AWT-EventQueue-0" java.awt.HeadlessException: No X11 DISPLAY variable was set, but this program performed an operation which requires it.
at java.awt.GraphicsEnvironment.checkHeadless(GraphicsEnvironment.java:159)
at java.awt.Window.<init>(Window.java:431)
at java.awt.Frame.<init>(Frame.java:403)
[code]....
This is not my desktop computer but my remote server.
View 1 Replies
View Related
