General :: Cannot Use The Arch Repository After Installing
Jan 10, 2010
The first problem is that I cannot use the Arch repository. Every time I try to, it brings up a "no address record" error. I have configured my network interface properly and can ping www.google.com and receive a whole load of crap. Definitely working.
Whats wrong?
The second problem is that the boot-up process hangs for a very long time at "Starting Network." This make my boot of Arch just as slow as *buntu! WTF? Whats wrong there? Aside from that, I am unhappy that my Ethernet card is not detected but thats another question. The only ting I am pleased with right now is the speed of the system, and the fact that I used 4 different file systems on 7 different partitions without a hitch.
View 13 Replies
ADVERTISEMENT
Sep 7, 2010
Warning: Do not edit /etc/sudoers directly with an editor; Errors in syntax can cause annoyances (like rendering the root account unusable). You must use the visudo command to edit /etc/sudoers. In the previous section we added your user to the "wheel" group. To give users in the wheel group full root privileges when they precede a command with "sudo", uncomment the following line:
%wheelALL=(ALL) ALL
so i signed in as root and typed in visudo now i alreayd made the changes but how do i exit and save super+x doesnt seem to do it for me since im not using nano and not supposed to cause it causes errors
View 3 Replies
View Related
May 10, 2010
I don't know were this goes so I'm just gonna put it here
Basically earlier today i figured i wanted to try out backtrack 4 but I could only have a maximum of 4 partitions on an hd at a time.
So i deleted my partition that contained my arch home directory (didn't really have any data on it and i figured i could just make a new one later) to create an extended partition to put backtrack on. Well all went well except now when I select arch instead of backtrack i get a disk check error.
This is the first part of the error, I can't exactly copy and paste it as its on my laptop. code...
View 30 Replies
View Related
May 7, 2011
Can anyone explain why a 64 bit kernel builds a bzImage in both arch/x86 and arch/x86_64- is there a difference between the two?
View 2 Replies
View Related
Nov 16, 2010
I installed Fedora 12 and it said 500 software updates available. When I tried to install them I got this error message:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo 'Error getting repository data for $s, repository not found' $ (repoid)
View 4 Replies
View Related
Jan 10, 2011
I just did the pacman -Syu command today since i have had limited access to internet i could use with arch lately, (been tethering via droid which is only compatible in ubuntu) The command line works fine, i even reinstalled X to see if that was the problem,whenever i do startx it loads up for a second but before my xfce screen even pops up the screen blinks and blackens.
View 7 Replies
View Related
Sep 18, 2009
I've been trying to get my wireless working on the livecd to make sure its possible before I install it, but, I get a ton of errors when I install RPM's
Code:
Traceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 1649, in install_files
txmbr = self.yumbase.installLocal(inst_file)
[code]....
RepoError: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. verify its path and try again I get that one trying to install a driver installer from [URL]
View 4 Replies
View Related
May 18, 2010
when i was trying to install perl with fedora using yum: # yum install perl i got the following error: Loaded plugins: presto, refresh-packagekit Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again
View 3 Replies
View Related
Jul 8, 2010
When I tell yum to update i get this error, Quote: $ yum update Loaded plugins: presto, refresh-packagekit Error: Cannot retrieve repository metadata (repomd.xml) for repository: InstallMedia. Please verify its path and try again
View 4 Replies
View Related
Mar 19, 2011
I recently moved from ubuntu to arch, upon installing it I realized it was command line based :S How can I get a GUI and make it look nice? I tried following this guide, but I dont even know what im doing.
View 14 Replies
View Related
Jun 7, 2010
What is the recommended method for Installing Software not in the Ubuntu Repository? I currently want dos2unix. I discovered from wiki that that dos2unix is supposed to be in the "tofrodos package". So then I checked the ubuntu repository.
[URL]
Then I did the usual "sudo apt-get install tofrodos". After I did this I discovered that for some unknown reason ubuntu removed dos2unix from the tofrodos package. How would you recommend that I get dos2unix now? Is there a way to use "sudo apt-get install tofrodos" with a repository name to use a different repository? I saw it was in the debian repository and I know ubuntu is based on debian. Could I use something like "sudo apt-get install tofrodos debian". Should I just go directly to the author's website and download it there?
View 6 Replies
View Related
Aug 2, 2011
I'm trying to install Adobe Air written for Ubuntu 11.04 [URL]. I downloaded it and have it saved in "downloads". I tried opening it with Synaptic, but it won't recognize it. My hope is to use Air to run a Windows program. Air drives the database.
View 3 Replies
View Related
Jun 14, 2010
I removed old ffmpeg
Code:
sudo apt-get remove ffmpeg
Want to install new one from Medibuntu repository. I have issued command on [URL]
Is there a command which display the repository of given archive (which will be installed) ? I wan to ensure that future installed ffmpeg will be installed from Medibuntu and not from some other repository.
View 6 Replies
View Related
Aug 14, 2010
My Arch Linux can't update for over a few weeks now! It just says that everything is up to date and quits. But I hardly believe there weren't any updates, before there were a few updates a day!
View 3 Replies
View Related
Mar 17, 2010
I was installing software I am getting the same problem as when I do this :
su -c 'yum -y install yumex'
Error: Cannot retrieve repository metadata (repomd.xml) for repository:
updates-testing. Please verify its path and try again
View 1 Replies
View Related
Aug 12, 2011
On a new Dell Lattitude e6400, I have installed both arch and Ubuntu. Ubuntu recognized wifi and ethernet right away and connected and is working fine, but in arch, I am having more problems then I usually do when using arch. From the output of lspci the ethernet is a intel device 1502, I have researched this and found it to need the e1000e module as its driver. I modprobed this module sucessfully, but no ethernet. With wlan, i have found that the card is a DW1501 Wireless-N WLAN Half-Mini Card that has a broadcom 4727 chip in it. I downloaded the windows driver for this chip and isntalled it with ndiswrapper but this did not help. What I think is the root of the problem is the error message that restarting networking creates.
Quote:
Dell only supplies drivers for ubuntu, but it should still be possible to get this to work. I have tried booting various live distros that I had drives for and I found that the parted magic boot disk saw the ethernet port and was able to connect to ethernet, and that the ubuntu live disk was able to connect to both wifi and ethernet. Somehow they must be seeing the prescense of the hardware in a way that I have not tried with arch. Please help, I really need to get this computer workign with arch.
View 1 Replies
View Related
Jan 21, 2010
I noticed that the clock in the FVWM taskbar displays UTC instead of my local time. And when I execute the date command, it shows the time zone as UTC. I wonder how to set it to display my local time zone?
View 2 Replies
View Related
Jan 18, 2010
How to install Xorg in Arch Linux? I am writing this from the command-line Links browser.
View 14 Replies
View Related
May 24, 2010
I'm having problems loading compiz-fusion or the settings with my nvidia driver, or driver itself. Basically, I installed Arch (in vmware) then ran: pacman -Syu, pacman -S libgl xorg mesa xf86-video-vesa hal xf86-input-evdev xf86-input-mouse xf86-input-keyboard compiz-fusion alsa alsa-util nvidia I've also added a user. I'm following the wiki guide but I'm not sure where to go from here. here's the error messages:
[URL]
basically it says that my nvidia driver is incorrect or isn't configured properly. I have an Nvidia 7300gt btw, does anybody know which driver I should be using? [URL] This one should work, I'm not sure what I'm doing incorrectly. it still says $DISPLAY not set when I type startx/ccsm/fusion-icon. And alos when I run pacman -S nvidia, is it downloading version 195.36.24? [URL]
View 9 Replies
View Related
Mar 25, 2011
I just set up Fedora14 on a PC in order to use it as an Amahi home server, but missed the step about adding the Amahi software repository during installation. I am looking for a way to add this repository.I found a support site that should show how to do this here:
[UR]
The first step is: 1. Create /etc/yum.repos.d/amahi.repo as root user I open a terminal, log in as root and enter "/etc/yum.repos.d/amahi.repo", and get the response No such file or directory.
1. Is post installation of the Amahi repository on a completely fresh Fedora14 a viable solution?
2. My experience with Linux/Fedora started yesterday evening - Is it possible to get a newbie proof explanation on how to perform the post installation?
View 12 Replies
View Related
May 13, 2010
So researching how to install Tomcat 6, I ran across a guide that specifically states there are issues with the repository version of Tomcat. Doing some more research it seems like this is reported in multiple places including a disussion on the official mailing list that was inconclusive. So my question is, if this is intended for a production server should I use the repository one or manually install it
View 2 Replies
View Related
Apr 11, 2011
I've recently struggled across this problem:
Code:
While executing this command:
I've tried to install glibc which didn't change anything.
My other problem is that I'm downloading at 35kbps from connexeon.net (Belgian repo) but that my connection is the following: [url
View 1 Replies
View Related
Mar 18, 2011
I completed an installation of Ubuntu 10.10 LTS 64-bit as a guest operating system on a VMWare server. Somehow during the installation process, I neglected to install a GUI desktop. I want to install the gnome desktop, but I am running into a series of errors similar to the one shown below:
[Code]....
View 1 Replies
View Related
Dec 13, 2010
Even if im logged into root I cant edit or view any files. Like if I type /etc/rc.conf in Arch it, says "permission denied" so how do I edit this file cuz I need to put gdm and dbus in my daemons
View 2 Replies
View Related
Jan 13, 2011
i'm looking for people that play LAN games under linux that would also be interested in producing an easy to use gaming distro that pre-scripts the installation of many popular wine-compatible windows games (plus those games that are cross-platform) all with the click of the mouse, my thoughts are
[Code]...
View 2 Replies
View Related
Nov 8, 2010
I installed pyxattr to play around with, and when I try to set them it says that the operation is not supported. Does Arch Linux not support xattr, or how do I enable them?
View 10 Replies
View Related
May 12, 2011
I just install arch linux yesterday. And I have an issue with the wireless connection. I can see wireless connections, when i click on thet networkmanager. But I cannot connect. If I remove WPA or any security from the wireless connection(from my wifi router) I can connect to wireless network without any issue. But when there is any security is involved to the connection it does not connect. How to connect to wireless. I've been using debian for a long time, but there was no any issue with this connecting thing. I am new to arch linux.
View 18 Replies
View Related
Feb 12, 2011
Its been since October since I accessed my Arch OS, due to a career and phical move. Since that time I forgot my username and password (including root).My question is, is there a way to get around it without starting from scratch? Oh yeah, mbackup live CD is 700 miles away! lol I can only guess what the answer is going to be.
View 6 Replies
View Related
Mar 9, 2011
When I run the command << kiwi-ltsp-setup -n >> the process gets to the point where it starts "Retrieving repository 'http:__download.opensuse.org_update_11.3' metadata" What do I change so that it will read from my local update repository. The local update repository is already listed in my yast repositories while the ttp:__download.opensuse.org_update_11.3 is not.
View 1 Replies
View Related
Jul 23, 2010
Add to your repositories
perl
and manually
"http://download.opensuse.org/repositories/security/SLE_10/"
[code]....
View 3 Replies
View Related
