General :: Error In Squid Proxy Access - Internet Explorer Cannot Display The Webpage
May 31, 2011
I am using Squid Server from last 5years. There is a site "http://www.firstflight.net", which was accessible before few days but now I am unable to access this site. If I use IE8 then getting below error:
"Internet Explorer cannot display the webpage"
Or using Google chrome getting error:
"This webpage is not available The webpage at http://www.firstflight.net/ might be temporarily down or it may have moved permanently to a new web address. Error 330 (net::ERR_CONTENT_DECODING_FAILED): Unknown error."
But other sites are working fine..
View 3 Replies
ADVERTISEMENT
Nov 6, 2010
I have configured a squid proxy server with @2 eth in different network subnet and with site blocking and extn file download blocking. One eth0 for office wired network and another eth1 is for office wireless network for laptop use for guest and visitors.
The problem is [URL] is an Indian government website, which is not working though this proxy server and the Internet Explorer is getting very slow and freezing the computer. In alternate I have configured a another test server with squid proxy with out any security and test the same. the problem is still with the all the computer in the network. The above website is perfectly working with Gateway configuration in TCP/IP properties in Network Configuration in MS Windows XP computers but through squid proxy its not working.
View 3 Replies
View Related
Apr 4, 2010
Slow access to web site using squid and Internet explorer.I am trying to troubleshoot an issue I am stuck on. We have a website that is loading .htm documents extremely slow when using Internet Explorer 8 behind Squid. When we bypass the proxy and go directly out to the internet all is fast and pages load fine.But when the proxy is on documents will take sometimes up to 6 minutes to load.This issue is only apparent using Internet explorer 8.I do not see the issue when using firefox with Squid.I have tried to use the no_cache directive thinking it may have been the cache but that didn't work either.I am attaching our access.log, store.log and squid.conf.
View 2 Replies
View Related
Apr 28, 2010
Centos 5.4 distro using on remote machine. I have remote site where internet access given via squid proxy. So when we enter in browser it start working internet fine. But on command line (bash shell prompt terminal) like wget, ping, nslookup, traceroute etc., these commands does not work.
View 6 Replies
View Related
May 5, 2010
I have configured Squid proxy on RHEL 5. Now I want all squid clients to use default website which is set by Squid Proxy Server. So whenever user opens their browser they will visit same website automatically.
View 3 Replies
View Related
Dec 29, 2010
I am using squid to controlling access to the internet all is working fine expect one of the user who is using outside organization portal to connect internet. But whenever he tries to enter in the portal by typing (EXAMPLE)url. Permission denied error from squid occur.
How can i allow this portal in squid. So squid will allow this to access.
View 1 Replies
View Related
Jan 28, 2010
I'm fairly new to Linux and very new to Squid and am having authentication issues! I am using Oracle Enterprise Linux (which is basically Red Hat without the branding) and wanting to use Squid Proxy Server for web access with authentication to Active Directory. I've found a number of articles about this online and all of them say to use auth program squid_ldap_conf which should be in /usr/lib/squid/. I don't have a squid directory in /usr/lib for starters and my squid binaries are in /etc/squid but there is no squid_ldap_conf in there either. I have installed the latest version of Squid (3.0) to see if that helped but I still cannot find the authorisation program.
View 3 Replies
View Related
Dec 30, 2010
I am using internet web control through squid... All is working fine only some little bit issues.
(1) Sometime when i tried to open google.com or any site I got message (The requested URL could not be retrieved) Screen Shot Attached.) but again after sometimes same websites will open.
url
(2) I would like to block word 'sex'.. So I have edit squid.conf with the following acl
acl Blockword url_regex sex
http_access deny Blockword
but problem occur in some websites where 'sensex' word found in url. Then squid block 'sensex' url content website also..
View 2 Replies
View Related
Feb 24, 2011
i am monitoring access log messages in squid proxy server,can it possible to get date,time,day in access logs is it possible
View 2 Replies
View Related
May 19, 2010
i just implemented ur instruction n got success but i have one problem that i want to provide only two or three web sites access to groups in squid.
View 1 Replies
View Related
Feb 1, 2010
My company is using Squid Proxy 2.6 for internet connection. Recently we implement a Webmail system. This is the link [URL] can access it using computer directly connect to internet but those using Squid Proxy are unable to Login although the login screen appear. Is this cause by the squid.conf setting or something else?
View 1 Replies
View Related
Oct 18, 2010
I have Fedora Core 13 running. I have successfully (I think) installed squid, although I may have it configured incorrectly. I can ssh into the box from work via putty, but I can't use the proxy. I get a message "the connection to the server was reset while the page was loading" I can use the proxy from my home network, and have watched the tcpdump for port 3128 while using the proxy. I have turned off iptables completely (I'm not sure yet how to just allow squid)...
View 3 Replies
View Related
Jun 6, 2010
i have squid 2.6 server running on rhel5. by default teamviewer access is deny. i want to allow access of teamviewer but not getting.
View 4 Replies
View Related
Jan 15, 2010
I'm using squid version 2.7. The problem is when access.log is writing in new file for a new day, the access.log is written under "root" id, not "proxy" id. It caused the squid services not be running. I have to "chown" access.log to become "squid" id in order to run squid services. What I saw here is new access.log is written by "root".
View 2 Replies
View Related
Jan 2, 2010
I have configured a normal squid & now I want to manage internet bandwidth thru. "squid" proxy only.
Squid proxy server ip is :- 192.168.17.30
Client PC ip addres is 192.168.17.25
Total bandwidth avaialable :- 2 Mbps
Now, I want to limit bandwith of 400 kbps for the ip address 192.168.17.25 pc only. So, is there any method available for bandwidth limiting for a single pc?
View 2 Replies
View Related
Jun 15, 2011
I my office I have configure dhcp in my centos sever
eth0 for adsl-setup
eth1 for lan 172.16.0.4
I am using squid proxy server for internet access,
in my office all are using laptop through wifi , so i need to configure the browser proxy setting for accessing internet.
is there any way to setup automatically get the proxy setting as dhcp. I have tried transparent proxy but no success.
View 3 Replies
View Related
Aug 24, 2010
I am using Redhat 5.3 , I configured well access list using IP address, but my customer want to access list on MAC address basis.
View 2 Replies
View Related
Jun 14, 2010
i have the following ip assignments
fedora (iptables)
eth0 -private :192.168.1.1
eth1 -public : 186.117.50.6
squid proxy
192.168.1.10:3128
my clients range
192.168.2.0/24
how can i make my clients to browse internet only from proxy server my network is NAT 'ed. Please specify a iptable rule to allow internet access for my clients to browse ONLY if they come through proxy server.
View 1 Replies
View Related
Apr 8, 2010
I've been doing some security testing in a lab environment that does not have direct internet access. From home to connect to my lab machine, I
1. SSH to machineA.
2. SSH from machineA to machineB
where machineB is my actual lab machine. neither machineA or machineB allow anything other than SSH, and machineB is only accessible from machineA. However, I really need to run yum on machineB.I have managed to get internet access via Firefox on machineB by creating a series of SOCKS proxy via SSH.
1. machineB: ssh -L 12345:localhost:12345 user@machineA
2. machineA: ssh -D 12345 user@machineC
3. machineB: configure firefox to use socks proxy, localhost, 12345
where machineC has internet without limits placed. This is the only way I have managed to get internet working. I tried using ssh -L all the way from machineB->machineA->machineC but it didn't work (even when setting Firefox to use http proxy). I tried using ssh -D all the way, but again that doesn't work either. I do have access via Firefox using socks proxy. However, yum update fails to retrieve mirror list, and from what I have found I don't believe yum supports socks proxy directly. Instead, it uses http_proxy / ftp_proxy.how to get yum to go out over the SOCKS proxy I created (same one using in Firefox)? It seems like since Firefox can access the internet and everything without issues, i should be able to get yum to tunnel through the same connection to access everything.... I tried
>export http_proxy="http://localhost:12345"
(yum.conf) proxy="http://localhost:12345"
View 8 Replies
View Related
Jun 11, 2010
I have an old FC2 box running Squid version 2.5. It has been running since 2003 so I am in the process of replacing it. I have a new machine with FC11, iptables, and Squid 3.0 installed.
On the old machine I use iptables to intercept Port 80 traffic and send it to Squid. By default I block all internet access and allow only sites that are in an Allowed_Sites.txt file. Within Squid I also have statements to allow certain users to bypass Squid based on their IP address.
I have set up the same thing on the new box. I have iptables intercepting the Port 80 traffic and sending it to Squid. That is working because if I remove the redirect statement from iptables all internet access is blocked.
The problem I am having is that Squid is not blocking any websites. It acts like the ACL is set to http_access allow all. I have worked on this for several hours and am stumped.
These are my Squid rules:
acl allowed_sites url_regex "/etc/squid/Allowed_Sites.txt"
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32
acl SSL_ports port 443
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access allow Bypass_Users
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
acl our_networks src 192.168.1.0/24
http_access allow allowed_sites
http_access allow our_networks
http_access deny all
icp_access deny all
htcp_access deny all
http_port 192.168.1.254:3128 transparent
hierarchy_stoplist cgi-bin ?
access_log /var/log/squid/access.log squid
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|?) 0 0% 0
refresh_pattern . 0 20% 4320
visible_hostname FC11.proxybox
icp_port 3130
coredump_dir /var/spool/squid
View 2 Replies
View Related
Mar 7, 2010
today there was problem with isp but we fix it now other machine run internet fine but when we run through squid proxy machine it give this message to all users. what fields column values config i should check it. i also reset the cache make empty folder. restart machine also service clear the logs . it is on centos 5.4
see below message
ERROR: The requested URL could not be retrieved While trying to retrieve the URL: [URL] The following error was encountered: Read Error
The system returned:
(104) Connection reset by peerAn error condition occurred while reading data from the network. Please retry your request. Your cache administrator is root.
View 1 Replies
View Related
Dec 29, 2010
Every time I try to install squid through yum. #yum install squid
I keep getting this error thread.error: can't start new thread
Now I have seen several post on this error but and tried several solutions but I still can not get yum to work.
I am using Cent 0S but nothing seems to work.
View 1 Replies
View Related
May 1, 2009
I am using Fedora Core 9.0 and Squid Cache: Version 3.0.STABLE2 .
Now i am trying to use the squid as a proxy server but its not working its giving error like this ...
While trying to retrieve the URL: /
The following error was encountered:
Invalid URL Some aspect of the requested URL is incorrect.
Possible problems:
Here is my squid.conf
While trying to retrieve the URL: /
I have also try to forward the traffic coming on 3128 to 80 but its not working:
View 6 Replies
View Related
Oct 18, 2010
I'm running a squid server on debian lenny with ntlm_auth.
Everything is working good after following those two tutorials : [url] and [url]
As all was working perfectly i decided to rebbot my server, and after reboot the ntlm-auth was not working anymore.
When i tried to run the command "wbinfo" with many options i had this error message "error looking up domain users" or"error looking up domain group" so i think that the problem deals with winbind module.
I know that proxy user needs rights and that after reboot the rights are reseted, so this problem doesn't come from here.
And when i try to open IE with a client i have this "cache accesss denied" because the ntlm_auth wasn't done.
I tried to restart all services (samba,winbind,squid) without any success, only the "kinit" command is still working...
What is going on with winbind when the server is rebooted ?
View 2 Replies
View Related
May 19, 2011
How to install Internet Explorer in CentOS? What are the supporting files to be installed for that?
View 1 Replies
View Related
Jul 21, 2010
I have rhel 5 installed on my computer,i have installed Java on firefox but want 2 install Java for ie6 .
View 3 Replies
View Related
Sep 10, 2010
The Korean language works fine with firefox.
But when I want to type Korean on Internet explorer, it just shows question marks. (look at the picture)
How do I fix this?
I really need to use a website with IE and type Korean, ASAP!
View 3 Replies
View Related
Jul 24, 2010
I've a SQUID proxy server installed in SUSE 9.0 ES server. I've created cache dirs on seperate partitions for better caching. Its working fine. But since last 15-20 days, i've experienced very slow net access to clients. I've gone through the /var/log/messeges file, it generates a two line error messeges
client read request fd602 invalid request
parse http request: unsupported method;HET
This messege increases as the number of clients increates (for internet access). The apperance of error messege lowering down as soon as the number of clients reduces.
As the count of clients increases error messeges increases, internet access getting slower and slower.
View 1 Replies
View Related
Jan 17, 2011
I would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies
View Related
Dec 9, 2010
Currently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter
ddns-update-style interim;
ignore client-updates;
[code]....
View 2 Replies
View Related
