I have a problem accessing my site.
My Gateway, is using Ubuntu.
From ssh command, I can't ping it (and can't access it).
But, when I ssh to my client's gateway (different ISP), I can ping it (and can access it).
My admin says that it's the DNS problem in my Gateway but when I change the DNS on my computer, still the problem exists.
Trying to access 67.15.245.6 (its a forum site). I can't get to it from home for over a month now. I can't ping it, but I can ping obvious things like google. Tracert isn't working at all. Once it hits the lightspeed.frokca.sbcglobal.net hop it just dies like ATT isn't allowing traceroutes. I've been using Tor as a work around. About 3 months ago I basically had the same issue with openbittorrent.com's site.
I have a linux server and windows XP box. I can't ping the above IP nor tracepath/traceroute to the IP from my linux box.
I have ATT uverse.
EDIT: The site is hometheaterlounge.com (The IP won't do you much and its just the IP of the site host).
I have to ubuntu machine (9.10 and 10.4) with a openvpn tunnel between them.This is the situation:
Code:
NetworkA 192.168.0.0/24
|
UbuntuA br0:192.168.0.3 (openvpn bridge between eth0 and tap0)[code].....
UbuntuA has one only interface etho and there are two openvpn instance: one bridge istance with br0 and another instance with tun0.
UbuntuA is not the gateway for networkA. UbuntuB is the gateway for NetworkB.I need to comunicate between pc on networkB e those on networkA.This is the "ping situation" (no pc tested has an active firewall):
ubuntuA vs ubuntuB: OK
ubuntuB vs ubuntuA: OK
pc on NetworkA vs ubuntuA and ubuntuB: OK[code].....
In the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?
View 1 Replies View RelatedI'm going away for the weekend and will only be able to bring my laptop that has the latest release of Ubuntu on it. My question is: will i be able to access my company's Terminal Server site [URL] from browser in Linux, and be able to launch the applications? (Outlook, etc.) Seems to connect to Windows Server 2008. If this works in Linux, that would make my life a lot easier..
View 2 Replies View RelatedIn one of our network we are using one firewall which works as gateway. All machines are able to access internet through this gateway. There is no filtering and any internet restriction. I would like to setup monitoring system which monitor and log bandwidth and sites access by client machine. Is there any tool which monitor internet access as well as sites which are access from client machines.
View 12 Replies View RelatedHave no idea what I am doing operating a server. Our programmer got a new job and I am the one who has to take it over. Everything was fine til yesterday. You see I made a control panel to easier update the site www(dot)discoverysound(dot)com
but yesterday when I went to update the site I got an error called fopen. I thought I fixed it (and boy did I ever) but now I cannot get to my site because it says Forbidden You don't have permission to access / on this server. Apache/2.0.47 (Unix) mod_ssl/2.0.47 OpenSSL/0.9.7a DAV/2 PHP/4.3.3RC4-dev Server at www(dot)discoverysound(dot)comPort 80.
I have a Centos 5 server working as firewall, dns, proxy (squid) and mail server with postfix. sometimes it blocks ping from the net and when it hapen I cant browse my site not even fetch my email through webmail from outside. But inside every thing still go well even browsing the internet, but no ping to the net (e.g pop.gmail.com). when I restart it everything come up and work fine.
View 4 Replies View RelatedI cannot access/ping my Debian server. I know the IP is right (ifconfig, route and ip addr) all gave me 10.0.2.25 (route gave me 10.0.2.0).I cannot ping it from any computer in my netwerk, even when I try to ping it from my Debian itself, it gives me Destination Host Unreachable !(Wierdly, I can ping 10.0.2.2 tho).I am using virtualbox when the netwerk options 'NAT' turned on. When I look at my /etc/network/interfaces/ the last line looks like:iface eth0 inet dhcpShouldn't their be some other stuff listed?
View 6 Replies View RelatedI am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
I have start apache, and can see my site on 127.0.0.1, but I have router and don't know how to check my site from outside (Internet bellow). I have no domain name registered. Just want to check web server.
That should be easy. (or not?)
The router has static IP xxx.xxx.xxx.239 from the my internet provider and assign 192.168.1.100 to my computer.
Internet
Router
My computer - host my site
How to see my site from Internet?
Even ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
I've done a search and tried a few things as follows,I can not access the Fedora project.org web site from home comp using either Unbuntu 11.04 and fire fox, or Windows 7 and I.E.all I get is can't acess site when it times out.Following a posting on this site i tried the command host fedoraproject.org the output i got was "none' rather than some IPs as the person posting got.I want to switch from unbuntu to Fedora because it is what Ken Mayer uses to illustrate in his Linux + vids and I've found Unbuntu does not contain all the commands.
View 1 Replies View RelatedI've got my username on Ubuntu (I can't remember version number, but its 6 months old aprox)..
I'm the sole user (& admin)..
I have /home/myusername/ & can edit all files (without using sudo), but if I want to edit a file in another directory - i need to use Sudo..
I'm setting up a website /home/website/
(this is the same structure as the external website I'm going to edit, i want the directory structure to be the same..)
is there a way, I can allow FULL access to the /home/website/ directory - While logged in as /myusername/
(IE So I do not need sudo (or any 'admin' command), to edit the files )
I have Debian Lenny and I use Google Chrome for internet surfing. When I try to open a web page for any Microsoft site (microsoft dot com, msdn dot microsoft dot com, etc) it times out and never shows the page nor I get 404. All I get : "Waiting for www dot microsoft dot com" .
I have a Window XP VirtualBox machine within Debian with nic card as bridge and I can connect with no problems.
What could it be?. DNS look up addresses in Debian and Windows virtual are the same.
running apache2, i have already created a working sites. using virtual name hosting.but my problem is, i cant access my other sites except my server's localhost from other computer. i dont know what seems to be the problem, can you guys point me where to start looking?
View 2 Replies View RelatedHow can I block access to a certain internet site using ufw? Let's say I want to block access to www.xxx.zzz (IP 1.2.3.4) to any program and user; using iptables I can do
sudo iptables -A OUTPUT -d 1.2.3.4 -j DROP how can I do that using ufw? if ufw can not do this, where should I put this rule to persist it over reboot, without interfering with ufw chains infrastructure?
How I can benefit from a public external IP? Do I need a public IP to access my computer from a remote site?run a tftp server ?
View 1 Replies View RelatedSlow access to web site using squid and Internet explorer.I am trying to troubleshoot an issue I am stuck on. We have a website that is loading .htm documents extremely slow when using Internet Explorer 8 behind Squid. When we bypass the proxy and go directly out to the internet all is fast and pages load fine.But when the proxy is on documents will take sometimes up to 6 minutes to load.This issue is only apparent using Internet explorer 8.I do not see the issue when using firefox with Squid.I have tried to use the no_cache directive thinking it may have been the cache but that didn't work either.I am attaching our access.log, store.log and squid.conf.
View 2 Replies View RelatedUsing Ubuntu 10.10 I have a VPN account with VPNtunnel.se. I configured everything as described on their site. It uses OpenVPN It connects no problem. However; after it connects instead of having a nice secure connection I have no connection at all! I can't access any site, email, bittorrent all come to a screeching hault. The service works fine in Windows. I'm useless with linux networking.
View 7 Replies View RelatedWhen I'm trying to access my site using Firefox I get this error: "Unable to connect
Firefox can't establish a connection to the server at mysite.com.
-The site could be temporarily unavailable or too busy. Try again in a few moments.
-If you are unable to load any pages, check your computer's network connection.
-If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web."
Then I tried to access my site using Opera and Chrome but I get the same error, that the browsers couldn't connect to it.
The site to which I'm trying to connect is definitely up. (I ask a few people and they can access it and I looked at [url] and it says that my site it's up)
Has anyone had issues installing Drupal on centos. I have copied my files into a virtual host container but cannot access the site. When I place a phpinfo file into the folder and browes to it I see that Virtual Directory Support is "Disabled" However how did the php page get shown from the same virtual directory mm I may have asked to soon.Installing Drupal on CentOS 5/Red Hat/Fedora http://drupal.org/node/32773
View 1 Replies View RelatedFirewall disabled.Static IP addys given to each laptop, but makes no diff when dhcp derived IP addys.using wlan Cannot ping either laptop from a windows box, bit windows box pings other computers.Can access internet from either laptop and Samba works too.I can ping one laptop if I plug the LAN wire into it. In fact I can ping either the wlan IP addy or the LAN addy this way. WHen I remove the Lan wire I can still ping the wlan on the laptop, but restarting screws it all up again.I see that iptables and other files change when I plug the LAN cvable in and then remove it again.
View 1 Replies View RelatedI have a Compaq Presario R3000 with Ubuntu 9.10 32 bit that I just installed last night. I'm using a Zyxel G-102 Wireless card and Actiontec GT701WG wireless modem.
When I try to connect to the 'net, the network does show up and it connects strong (100%). It also shows multiple neighbors networks. It pings at 99% success (with over 900 sent as I write this) but when I open Firefox it can't connect, it just times out. I've used WEP security and have switched off security as well. I tried hooking up to the modem via USB and get the same result. It acts like a Firewall issue but there isn't one installed - at least that I can find and the Firewall in the modem is off. I ran FF in root with gksu firefox as suggested in another thread. I tried www.ubuntu.com and the header loaded but that was all. Then it timed out.
I'm new to Linux but have used Puppy Linux with this machine and card, etc. so I know it can/does work with Linux. I wanted a more refined distro and chose Ubuntu.
I just downloaded and installed the latest Cent OS 5. I disabled SE linux, turned off the firewall, and selected the Server package options when installing. I plan on using this as a router/firewall between my internal network and the internet, as well as web server, etc. The first thing I did was to configure the two NICs, internal one with 192.168.7.1 address and the other with an address from my ISP (I have a static address, but I also tried to let the DSL router assign an address via DHCP). Everything looked fine, I checked /etc/resolv.conf and my routes. I was able to ping the DSL router from the server, but I was not able to do a ping or lookup on anything outside my network. I tried host, dig, nslookup, etc, no luck. Obviously then, I was not able to browse the net with firefox.
View 4 Replies View RelatedBasically, I have a windows 2003 server virtual machine (vmware) inside Ubuntu 9.10.
The Ubuntu machine has IFconfig:
Code: sam@sam-laptop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:15:c5:b8:c8:8b
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:17
Why can't I ping or simply access the internal server on my ubuntu machine from a another computer on the 192.168.1.0 (slash)25 physical network? Do I need a bridge? Iptables?
i can ping to 192.168.10.104 but can't access it graphically.i am using firefox.. distro is ubuntu.. i do //192.168.10.104:9345..but it takes no response.can u help me.. i am using direct connection..
View 6 Replies View RelatedI'm using debian lenny.When I boot with kernel 2.6.36, ping always respond with Network is Unreachable. But when I boot with kernel 2.6.26 it works. I can't even ping the dafault router of 2.6.26 kernel when I am at 2.6.36. Also, system/administration/network does not show any connections while it shows something at the other kernel.
View 1 Replies View RelatedI've got two routers, 10.0.0.0/23 and 192.168.2.0/24, which are joined by a Linux box with interfaces eth0 (10.0.0.2) and ra0 (192.168.2.2). I've got masquerading for ra0, and a route to 192.168.2.0/24 on 10.0.0.0's router. I CAN ping hosts on 192.168.2.0 from 10.0.0.0 just fine, but I CANNOT access web pages.Strangely, If I enable masquerading on eth0, and add a route to 192.168.2.0s router to 10.0.0.0, I can ping AND access web pages from 192.168.2.0Here is my current iptables
Code:
*filter
:INPUT ACCEPT [0:0]
[code]...
Presently this client access the net through following setup
ADSL modem -> hub -> all computers
Now they want to do some kind of bandwidth control, content filtering. So I tried setting up squid with dansguardian. This is what I did
ADSL -> linux server -> all computers.
The linux server has two NIC cards. One to the ADSL router and another to the local hub. This is how my squid.conf file looks like
http_port 3128
acl ubc src 192.168.1.0/255.255.255.0 (for subnet)
http_access allow ubc
Have set the gateway server as 121.x.x.1. Which is the gateway server of the ISP. Now I can ping the local network, but cant ping the gateway or any other website. Also I am unable to access the router administration page.