I have start apache, and can see my site on 127.0.0.1, but I have router and don't know how to check my site from outside (Internet bellow). I have no domain name registered. Just want to check web server.
That should be easy. (or not?)
The router has static IP xxx.xxx.xxx.239 from the my internet provider and assign 192.168.1.100 to my computer.
In the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?
Have no idea what I am doing operating a server. Our programmer got a new job and I am the one who has to take it over. Everything was fine til yesterday. You see I made a control panel to easier update the site www(dot)discoverysound(dot)com
but yesterday when I went to update the site I got an error called fopen. I thought I fixed it (and boy did I ever) but now I cannot get to my site because it says Forbidden You don't have permission to access / on this server. Apache/2.0.47 (Unix) mod_ssl/2.0.47 OpenSSL/0.9.7a DAV/2 PHP/4.3.3RC4-dev Server at www(dot)discoverysound(dot)comPort 80.
I'm going away for the weekend and will only be able to bring my laptop that has the latest release of Ubuntu on it. My question is: will i be able to access my company's Terminal Server site [URL] from browser in Linux, and be able to launch the applications? (Outlook, etc.) Seems to connect to Windows Server 2008. If this works in Linux, that would make my life a lot easier..
Slow access to web site using squid and Internet explorer.I am trying to troubleshoot an issue I am stuck on. We have a website that is loading .htm documents extremely slow when using Internet Explorer 8 behind Squid. When we bypass the proxy and go directly out to the internet all is fast and pages load fine.But when the proxy is on documents will take sometimes up to 6 minutes to load.This issue is only apparent using Internet explorer 8.I do not see the issue when using firefox with Squid.I have tried to use the no_cache directive thinking it may have been the cache but that didn't work either.I am attaching our access.log, store.log and squid.conf.
I've done a search and tried a few things as follows,I can not access the Fedora project.org web site from home comp using either Unbuntu 11.04 and fire fox, or Windows 7 and I.E.all I get is can't acess site when it times out.Following a posting on this site i tried the command host fedoraproject.org the output i got was "none' rather than some IPs as the person posting got.I want to switch from unbuntu to Fedora because it is what Ken Mayer uses to illustrate in his Linux + vids and I've found Unbuntu does not contain all the commands.
I have Debian Lenny and I use Google Chrome for internet surfing. When I try to open a web page for any Microsoft site (microsoft dot com, msdn dot microsoft dot com, etc) it times out and never shows the page nor I get 404. All I get : "Waiting for www dot microsoft dot com" .
I have a Window XP VirtualBox machine within Debian with nic card as bridge and I can connect with no problems.
What could it be?. DNS look up addresses in Debian and Windows virtual are the same.
Trying to access 67.15.245.6 (its a forum site). I can't get to it from home for over a month now. I can't ping it, but I can ping obvious things like google. Tracert isn't working at all. Once it hits the lightspeed.frokca.sbcglobal.net hop it just dies like ATT isn't allowing traceroutes. I've been using Tor as a work around. About 3 months ago I basically had the same issue with openbittorrent.com's site.
I have a linux server and windows XP box. I can't ping the above IP nor tracepath/traceroute to the IP from my linux box.
I have ATT uverse.
EDIT: The site is hometheaterlounge.com (The IP won't do you much and its just the IP of the site host).
running apache2, i have already created a working sites. using virtual name hosting.but my problem is, i cant access my other sites except my server's localhost from other computer. i dont know what seems to be the problem, can you guys point me where to start looking?
How can I block access to a certain internet site using ufw? Let's say I want to block access to www.xxx.zzz (IP 1.2.3.4) to any program and user; using iptables I can do
sudo iptables -A OUTPUT -d 1.2.3.4 -j DROP how can I do that using ufw? if ufw can not do this, where should I put this rule to persist it over reboot, without interfering with ufw chains infrastructure?
In one of our network we are using one firewall which works as gateway. All machines are able to access internet through this gateway. There is no filtering and any internet restriction. I would like to setup monitoring system which monitor and log bandwidth and sites access by client machine. Is there any tool which monitor internet access as well as sites which are access from client machines.
Using Ubuntu 10.10 I have a VPN account with VPNtunnel.se. I configured everything as described on their site. It uses OpenVPN It connects no problem. However; after it connects instead of having a nice secure connection I have no connection at all! I can't access any site, email, bittorrent all come to a screeching hault. The service works fine in Windows. I'm useless with linux networking.
When I'm trying to access my site using Firefox I get this error: "Unable to connect
Firefox can't establish a connection to the server at mysite.com.
-The site could be temporarily unavailable or too busy. Try again in a few moments.
-If you are unable to load any pages, check your computer's network connection.
-If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web."
Then I tried to access my site using Opera and Chrome but I get the same error, that the browsers couldn't connect to it.
The site to which I'm trying to connect is definitely up. (I ask a few people and they can access it and I looked at [url] and it says that my site it's up)
Has anyone had issues installing Drupal on centos. I have copied my files into a virtual host container but cannot access the site. When I place a phpinfo file into the folder and browes to it I see that Virtual Directory Support is "Disabled" However how did the php page get shown from the same virtual directory mm I may have asked to soon.Installing Drupal on CentOS 5/Red Hat/Fedora http://drupal.org/node/32773
I am running a CentOS 5.6 Server with a website and Forum. The website has a contact form and users can email various people in the organization. I have setup sendmail to send any mails like this to my email address on a Windows machine.The problem is that there emails don't have a header which has the senders original email header. It comes from localhost on my sendmail. How can I get any mail generated from the apache site to ALSO send mail to root on the Centos Server? That way I should be able to see the header and report the spammer or block them.
I have to ubuntu machine (9.10 and 10.4) with a openvpn tunnel between them.This is the situation:
Code: NetworkA 192.168.0.0/24 | UbuntuA br0:192.168.0.3 (openvpn bridge between eth0 and tap0)[code].....
UbuntuA has one only interface etho and there are two openvpn instance: one bridge istance with br0 and another instance with tun0. UbuntuA is not the gateway for networkA. UbuntuB is the gateway for NetworkB.I need to comunicate between pc on networkB e those on networkA.This is the "ping situation" (no pc tested has an active firewall):
ubuntuA vs ubuntuB: OK ubuntuB vs ubuntuA: OK pc on NetworkA vs ubuntuA and ubuntuB: OK[code].....
I've been on a quest to enable full routing through my openvpn tunnel between my office and the colo. Masquerading will work, however it will throw off anything key based and makes a lot of things just more difficult and vague in general. Is there an easy way to do this via iptables? I tried using quagga hoping it would magically solve my problems, however it does not seem to do my routing for me . I just did a basic static route within zebra...
I have installed proxy server on ubuntu.I have done every process which is needed to establish proxy server.internet is also working fine through proxy but the sites which needs to be blocked it is not blocking.it is opening.I have made entry of sites which i needed to be blocked in block_dstdomain file in proxy
I am trying to set up a web based FTP site on my home server, I got ftp up and running and I can log into it using an ftp client but I want to set it up so I can get to it from the web. I put the directory in the www/html folder but that does not seem to help it
If anyone could point me in the right direction that would be great. I also need to let anonymous users get access to it.
I have three locations with a central office connected to two remote locations. At the central office I run on a cisco asa 5505 two site to site vpns. The remote end of the first site is a checkpoint firewall , and the remote end of the second site is racoon on debian. Both sites are up and working. However, where at the first site traffic goes both ways, at the second site it only works from the central office to the remote office.
For example, I can ssh from a host in the central office to a host in the first remote site (through checkpoint firewall,) then ssh back from that host at the remote office to any host in the central office. In contrast, after I ssh from a host in the central office to a host in the second remote office (through racoon), I cannot see the central office hosts (ping the ip address of a central office host, ssh, etc. all fail.) The vpn settings at the central office (the cisco asa 5505) are identical. So it seems to me that some routing magic is missing on the host running racoon at the second remote office. Where would such setting reside? racoon config files? iptables?
Only from internal lan. I have secondary IP address added for SSL site, and we are natting that address from that outside. I can hit it if I change my hosts file to that local IP on the server itself, but when using external NAT address it never hits the server. But if you telnet to that external address with port 80 or 443 it works.
Here is a sample of my config with servername and ip addresses changed:
I have httpd server installed and I need to do redirect all the requests from clients thats start with a http://abc.*.* on to [url]. I know this has to be done with Rewrite conditions but Im at a loss coming up with the right condition. this site doesnt have any virtual hosts configured. Currenlty I only can access the apache test page.
I installed for the sheer pleasure of it a webserver. includes apache2, postfix mail server, MySQL, MyDNS nameserver, PureFTPd, SpamAssassin, ClamAV, etc etc. (I have tried to use the config panels ispconfig and webmin)
The situation: There are 3 sites listed on the server, All 3 on different virtual hosts (obviously). The http access goes trough the 20080 port since my ISP blocks everything below 1024 (the bastards). I use a linksys router (192.168.1.1) with dmz pointing to 192.168.1.100 (server) The sites on the server:
inphone.be fraksken.be fraksken.is-a-geek.org (but appearently not geek enough) I also gave them own IP's: 192.168.1.95 192.168.1.96 192.168.1.100