Ubuntu Servers :: Openvpn Site-to-Site : Impossibile To Ping Client On Subnet?
Jun 25, 2010
I have to ubuntu machine (9.10 and 10.4) with a openvpn tunnel between them.This is the situation:
Code:
NetworkA 192.168.0.0/24
|
UbuntuA br0:192.168.0.3 (openvpn bridge between eth0 and tap0)[code].....
UbuntuA has one only interface etho and there are two openvpn instance: one bridge istance with br0 and another instance with tun0.
UbuntuA is not the gateway for networkA. UbuntuB is the gateway for NetworkB.I need to comunicate between pc on networkB e those on networkA.This is the "ping situation" (no pc tested has an active firewall):
ubuntuA vs ubuntuB: OK
ubuntuB vs ubuntuA: OK
pc on NetworkA vs ubuntuA and ubuntuB: OK[code].....
View 6 Replies
ADVERTISEMENT
Jul 27, 2010
I've been on a quest to enable full routing through my openvpn tunnel between my office and the colo. Masquerading will work, however it will throw off anything key based and makes a lot of things just more difficult and vague in general. Is there an easy way to do this via iptables? I tried using quagga hoping it would magically solve my problems, however it does not seem to do my routing for me . I just did a basic static route within zebra...
View 3 Replies
View Related
May 2, 2010
I am playing with openvpn, and I got stuck.I am using ubuntu server for openvpn server, which has 2 physical NICs, one is directly on internet and other is LAN, where few pcs are connected on.
View 5 Replies
View Related
Feb 18, 2010
In the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?
View 1 Replies
View Related
Mar 25, 2010
I have three locations with a central office connected to two remote locations. At the central office I run on a cisco asa 5505 two site to site vpns. The remote end of the first site is a checkpoint firewall , and the remote end of the second site is racoon on debian. Both sites are up and working. However, where at the first site traffic goes both ways, at the second site it only works from the central office to the remote office.
For example, I can ssh from a host in the central office to a host in the first remote site (through checkpoint firewall,) then ssh back from that host at the remote office to any host in the central office. In contrast, after I ssh from a host in the central office to a host in the second remote office (through racoon), I cannot see the central office hosts (ping the ip address of a central office host, ssh, etc. all fail.) The vpn settings at the central office (the cisco asa 5505) are identical. So it seems to me that some routing magic is missing on the host running racoon at the second remote office. Where would such setting reside? racoon config files? iptables?
View 1 Replies
View Related
Oct 3, 2010
Maybe a site-to-site Ouija board connection.
View 5 Replies
View Related
Mar 23, 2010
Trying to access 67.15.245.6 (its a forum site). I can't get to it from home for over a month now. I can't ping it, but I can ping obvious things like google. Tracert isn't working at all. Once it hits the lightspeed.frokca.sbcglobal.net hop it just dies like ATT isn't allowing traceroutes. I've been using Tor as a work around. About 3 months ago I basically had the same issue with openbittorrent.com's site.
I have a linux server and windows XP box. I can't ping the above IP nor tracepath/traceroute to the IP from my linux box.
I have ATT uverse.
EDIT: The site is hometheaterlounge.com (The IP won't do you much and its just the IP of the site host).
View 5 Replies
View Related
Mar 20, 2010
I have a problem accessing my site.
My Gateway, is using Ubuntu.
From ssh command, I can't ping it (and can't access it).
But, when I ssh to my client's gateway (different ISP), I can ping it (and can access it).
My admin says that it's the DNS problem in my Gateway but when I change the DNS on my computer, still the problem exists.
View 2 Replies
View Related
Apr 28, 2010
I'm after something simple to use similar to the XP fax client/fax printer. Hylafax seems an overkill. HPlip app seems to expect an HP printer/scanner or fax machine. Is it true that hplip is an HP exclusive? I'm using opensuse 11.2 with kde 4.3.1, but I would consider gfax. Gfax is not on my DVD. The docs for that on the hylafax site stop at 2008. Is an up to date Gfax a possibility? I see most of the hylafax posts in the archive get redirected to the hylafax website. I've been thru most of that stuff, but much it's out of date. Hylafax seems to be the basis for other apps.
I'm signed up for the Hylafax-user list, but I didn't see any hylafax archives to browse thru. If you are still with me here, I have an opensuse 11.2 with a dial-up internet. From the DVD I installed from I installed hylafax-4.4.4-19.3.i586 and client. That install load a bunch of fax tools at places the hylafax docs don't expect. Besides that their docs only go up to opensuse 10.2, tho there is some stuff or enterprise suse.
View 9 Replies
View Related
Mar 20, 2009
Code...
What I can ping
Host A -> Host B
Host B -> Host A
Host A -> Router B
Host B -> Router A
Host A -> OpenVPN B
Host B -> OpenVPN A
VPN Server -> VPN Client
VPN Client -> VPN Server
What I can't ping
VPN Server to any client side host local address
VPN Client to any server side host local address
I have searched and searched for this but can not find any answers. Why can I not ping Host B from my OpenVPN server?
View 1 Replies
View Related
Mar 28, 2010
After I applied below iptables rule.. I am unable to ping the host in 172.16.1.0/24 from OpenVPN client
View 1 Replies
View Related
Jul 19, 2010
I'm migrating a site from one VPS to another, and I'm having trouble understanding what I need to do with DNS. I haven't even gotten to the nitty-gritty of it: I don't understand it at a very high level. My host sent me this email explaining what I need to do, and I don't even know what questions to ask.
Quote:
Your registrar has MyHost's nameservers listed for your domain name.
All DNS-related info for mysite.com and everything inside that zone is defined in your zone file which is currently on your VPS "myserver1" and is being rsynced to [our] servers.
I'm suggesting that if you don't want to spend any of your migration time setting up a DNS server then you may wish to just make the changes in that file, since that is the method that is currently working.
I've come up with two possible interpretations of this situation, and perhaps neither is correct.I need to set my new VPS to be its own nameserver, and have my registrar point mysite.com to my VPS. I need to set up a DNS server to somehow interact with MyHost's nameservers (something about a zone file). Do either/both of these sound plausible? I thought DNS made a server into a nameserver, is that not right?
View 6 Replies
View Related
Jul 29, 2011
Im trying to just set up my web page so it can be seen on my local home Lan (then Ill try to get it on the internet). I can see the site it on my pc but other network users cant.
They can ping my computer but cant telnet to it on port 6060 (thats the one is set the server up on)
What's wrong with my configuration its mostly the default with a few changes that I hoped would make the site work.
My ip 192.168.1.10
Here is the sites-available default file
Quote:
View 7 Replies
View Related
Aug 19, 2010
I have apache installed on my server. Is there a way to view how many users are on my site?
View 3 Replies
View Related
Jun 2, 2011
Right now my server is being used as a Minecraft server. I have a site hosted on it, but my ISP blocks port 80, so I'm the only one who is able to view the site. I want to be able to change the port the site is on so that anyone can view it. I've looked it up and apparently that is possible; however, I haven't found out how to do it. I've changed the ports.conf file in /etc/apache2 and the default file in /etc/apache2/sites-available, but it didn't work. All that did was take my site off of 80, but it did not put it on the new port I specified. What exactly do I have to change so that when I go to mysite:port, it loads my website?
EDIT: Also, just for extra information, the two ports I tried were 8080 and 81.
View 4 Replies
View Related
Aug 3, 2011
Has anyone ever worked in the development of a cart application able to handle transactions and payment. I am not just interested in the database processing but how the money is being transfered. Do you need some server requirements? Any book(s) that you find useful to read? or online source ?
View 2 Replies
View Related
May 3, 2010
I am running a website using a Fedora 9/ Apache 2 platform. I have added two new disks to the same server and installed Fedora 12 (I don't have both sets of disks in at the same time either the old ones with F9 or the new ones with F12). Having copied 'all' of the settings over to the new F12 installation it only serves pages on localhost not on the external IP as the F9 version does.
I have now installed F9 (got rid of F12) onto the new disks and copied the settings from the old installation onto the new disks and the server once again serves up pages. The only hardware changes are the disks being popped in and out between restarts as I swap between the old and new installations.
Hopefully there is some obvious (to someone) difference between F12 and F9 that would account for this.I have messed with settings for a while now and am almost at the point of paying for RHEL to see if that does the job.
View 4 Replies
View Related
Jun 18, 2011
i need to host multiple site under one ip adress, its this posible ?
View 1 Replies
View Related
Jul 12, 2010
A while back, I put a site up under a LAMP setup, and followed a guide from ubuntuforums that I googled to set up SSL encryption for the site.
That site works great, but since then, I've added some other sites to the same LAMP server. They load fine as well, but if I type in https:// before going to the latter sites, the browser attempts to redirect to the first, and warns that it is a fraudulent certificate, and that I'm at risk by going to the site.
Obviously, it isn't an attack site, the certificate is just set up for only one domain. How do I prevent my non-SSL sites from redirecting to the SSL-encrypted site?
View 6 Replies
View Related
Aug 10, 2010
How can I redirect my URL after a site move.I have phpBB forum software installed on a 10.04 server, and I recently moved the forums from mysite.com/forums/ to mysite.com/.
So, a thread that looked like
mysite.com/forums/viewtopic=...
now looks like
[code]...
View 2 Replies
View Related
Feb 10, 2011
I am running ubuntu 10.04, and I have one website up and running 1 website.from my local server, from my local computer on the same network I can type in the ip address of my server and I do get the default webserver is running page, however when I try to connect to my domain, it cannot find it. I have run a ping, and it reached it just fine.
View 7 Replies
View Related
Mar 25, 2011
To setting up the mail server for my site. The situation is such that it is necessary to allow access through the site (built under LAMP) to the mail server. Ligament postfix + dovecot good option? or who have a similar configs mail server.
View 1 Replies
View Related
May 29, 2011
It is possible for apache2 (debian) to host a frontpage page? All links I found from google and microsoft said that frontpage is dead. How can I host the site ?
View 4 Replies
View Related
May 31, 2011
Does anyone have any recommendations on what software I can use so I can FTP my site's files to the /var/www directory? I tried using vsftpd, but the software was terribly difficult to configure correctly. I tried telling it to make everything that was uploaded have "704" permissions, but everything I uploaded had strange permissions on them. When I used to use professional Linux hosting, that was never a problem, so I'd like a simple FTP server software so I can easily manage my site from a remote location.
View 9 Replies
View Related
Apr 13, 2010
On Fedora 12, I guess this is a security setting. How do I get Apache to pick up more than one website in my document root directory. It only picks up one and denies me permission to view the others on my document root directory. This problem doesn't exist in XAMMP. How do I go about it please.
View 5 Replies
View Related
Mar 24, 2010
I installed apache on my local machine to test my sites. I have one problem:I created a new site configuration in /etc/apache2/sites-available and enabled it. The problem is that cgi is not working, it just prints the content of the files. (The default location for cgi, /usr/lib/cgi-bin works without problem.)Here is the content of the site configuration file:
Code:
<VirtualHost *site1:80>
ServerAdmin webmaster@localhost
[code]....
View 4 Replies
View Related
Dec 8, 2010
I blocked facebook and ..... but if any one change the http with https its open with him how can i mange https like http.
View 9 Replies
View Related
Mar 25, 2011
I used the Ubuntu server 10.10 for cache and proxy purpose. I install squid 2.7 stable 9. My problem is to cache the some url by force. eg . [URL]...I search the clues by using google. but I only found how to block the url. so I come here and request the advice. I want to cache the couple of site because of our country have bandwidth problem.
View 2 Replies
View Related
Mar 28, 2011
A church I've been working with has a CCTV system that has a web interface for viewing the camera feeds. We need to see the page from the outside, but it is just an HTTP page, no encryption. The box itself does not accept any sort of SSL encryption. How I can get this on the net in a secure way? At worst I could set up a remote desktop type solution, but I was really hopping I could use some apache magic and just re transmit the page to https and ssl encrypted.
View 2 Replies
View Related
Apr 6, 2011
I've successfully set-up Drupal on my machine on a local network and have no problem accessing it with the virtual host names defined in /etc/hosts, but I don't have bind or any other DNS set-up.I've installed Postfix and can sent email with the mail command to unix account, and I can also read them with the mail command( from the command line).Now, my problem is with not being able to use the local Unix email accounts in drupal. Particularly, I would like to have one of the unix account receive email for the development site.I might like to also have various user on the drupal installation, and then test sending notifications to them.here is my /etc/postfix/main.cf# See /usr/share/postfix/main.cf.dist for a commented, more complete version
View 2 Replies
View Related
