I have downloaded the Ubuntu 10.04 alternate PPC to install on my old emac.
It starts fine the installation process, and I want to have only Ubuntu on this machine so I erased all the mac partitions and create 3 new partitions
/ = root
swap
and /home
Everything goes well until I get the message that there is not a partition called Apple_bootstrap and I get stuck there.
I recently came into (temp) possession of two Original, white, 700 MHz eMacs. I have only started to play on one of these so far. Installed Ubuntu 10.04 PPC from Alternate Install CD - two times actually (because I thought I may have screwed something up the first time), but both times it seemed to go without a hitch.
After install and restart, I cannot drop into a shell, all I get is the black screen. I'm probably forgetting something really obvious, but I've tried Holding "Shift" and "F1" and control+alt+F1 (and F2, F3, F4, F5, F6), tried the esc key; with two different Apple USB keyboards. I'm really just wanting to load an xorg.conf file and reboot.
Should I have been trying to do this just after install, but before restarting? I can get into Open Firmware just fine, but have no idea what I'd do from OF except start off the CD again. I should mention I installed Debian just fine and am pretty confident MintPPC would work flawlessly, but I am trying to get Ubuntu 10.04 on here.
I snagged the 10.10 alternate install ISO for PPC and got it up and running on a 1ghz G4 eMac with 1gb of RAM and a 60gb HDD. It runs... OK. It could be a lot better. I'm planning to shut off the bluetooth and CUPS services since neither apply to this system; are there any other services I can shut down, or any other tricks I could do to make it run a bit more smoothly?
What about alternate window managers? I realise that the PPC platform kinda limits me, but what about TWM or FVWM?
How can I make Compiz work on this eMac? It's the original, 700 MHz, 1 GB RAM, Ubuntu 10.04. It was enough trying to get the xorg.conf file to show any video, but now I want to be able to use compiz so I can have a faster experience.
View 4 Replies View RelatedWith my ubuntu iso in the dvd drive, I do not get any boot from options for it to be used as boot drive within the boot order from the boot control panel. On startup with the alt key pressed I only get the Mac drive but when I change the boot to the other option (network) and press the alt key on startup, I get the boot order screen with the Mac HD and also the Ubuntu iso but cannot get the Ubuntu to highlight and use, just the Mac remains highlighted. On the same screen I get a very small wrist watch to the left of the screen that the mouse can move up and down but not to the side.
I am using a windows usb keyboard and usb mouse, I have used all manner of keyboard combinations to get the Ubuntu disc to highlight but nothing seems to work. Within the drive section, the "My Mac" drive is locked and cannot partition it or change anything about it. Has anyone any ideas that I can try? I did not want to get a Mac keyboard and Mouse as yet seeing as I wish to change the operating system to ubuntu.
I have tried eject /dev/cdrom, sudo eject, pressing the eject button but whenever i do , it just opens for like 1 second then closes right back. is this fixable within Xubuntu, or is this a physical problem with the cd drive?
View 4 Replies View Relatedhow I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:
Three Ethernet Cables
Two Printer Peripheral USB Cables
The Two Computers
A 2GB Flash Drive
That is all I can think of right now. I do not want to use CDs. In a way, I would like to do a network boot. So, how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? I want to put Xubuntu on it, and earse the rest of the Hard Drive. The computers getting this are the iMac G3s and the eMac G4. The eMac has 256MB RAM, 40GB HDD, and a 700MHz processor. Two iMacs have 128MB RAM, 40GB HDD, and a 600MHz Processor. The other iMac is the same as the rest but has a 500MHz processor.
I am planning to do a full install of Ubuntu 10.04 on my eMac G4 Power PC (PPC). It has 512 MB of RAM, 40 GB of space, and its running Mac 10.4.11 Tiger.
I need help booting off the DVD. Can anyone Give me a guide on how to install Ubuntu 10.04 on a old eMac G4 Power PC?
I plan to install this instead of the Mac OS because it is very slow and buggy.
I am putting ubuntu onto a ppc (emac 1.25Ghz) and I was wondering weather to go with the last officially supported release (6.10) or to try the newest (10.10)?
The machine will only be used to play music and brows the web, nothing heavy but it MUST play flash content (primarily from .....). I have had varying degrees of success on an older G4 ppc (700 Mhz) but never got it to play flash. are the open source alternatives to flash any good on the machine?
How can I resume a stopped job in Linux? I was using emacs and accidentally hit ctrl-z which blasted me back to the console. I can see it when I type 'jobs'
[*****]$ jobs
[1]+ Stopped
emacs test_queue.cpp
I have an emac powerpc that runs Mac OSX version 10.4. I am having trouble booting from a live cd. Holding down C does not work an I have tried different commands in open firmware and none of them work.
View 7 Replies View Relatedemac is new to me and I want to create a panel launcher ie. icon shortcut but there are 4 choices and I don't know the difference in function or usage between them: emacs, emacs-23.2-no-x11, emacs-23.2-with-x11, emacsclient.I want to learn how to use emacs so which one of these versions do i choose?
View 11 Replies View RelatedI installed the powerpc version of Debian Squeeze 6.0.1a on an eMac. According to the Wikipedia article, these systems had an nVidia geforce2 MX graphics card, and the system is using the Debian open nVidia drivers from install. I've gotten everything working on it, except the graphics are off. It's acting like either it can't handle the resolution or all the colors and looks a little like it wants to run in 256 colors. It's not unusable, just annoying. I know that it can handle a normal resolution because it was doing fine under Mac OS X puma before I wiped it and installed debian (I put debian on it because I needed a modern web browser, and the ones available under that version of Mac OS X weren't doing the job). I went to the nVidia website, but they only have the driver for x86 Linux. I need it for the G4 powerpc. Any ideas? I'm used to running Ubuntu on x86 machines, so the powerpc thing is throwing me a bit.
View 4 Replies View RelatedToward the end of installing Ubuntu 10.10 32bit (Alt CD) on my iMac 11,1, the installer asked me to type in the location for installing the grub boot loader.
I told it to use /dev/sda3 and it immediately failed. I'm still in the installer. Can anyone suggest a solution?
Here are my partitions on sda:
...from the shell in the installer, there is no grub.cfg in /target/boot/grub.
When I run it live, I see KDE4. When I install it off the same disk, it installs Gnome. I can't figure out how to install KDE4. I had no luck with apt-get install kde4 (E: Couldn't find package kde4), no luck with aptitude, no luck with Synaptic (The following packages have unresolved dependencis kdebase-runtime-bin-kde4).
View 3 Replies View RelatedNeither Ubuntu's Unity or KDE respond to the function keys on a regular Apple USB keyboard. I can plug in a non-Apple keyboard and they work just fine. What needs to be changed or configure so that F1 and company on the Apple keyboard work as on other keyboards?
View 1 Replies View RelatedThis morning I bought an Apple wireless keyboard and I got it connected through Blueman. It works like a charm, but I have on problem;
When I log out I can log back in by typing in my password. However, when I restart the computer it seems that bluetooth is not loaded yet and I cannot enter my password. So I have to log in using my wired keyboard, and then disconnect & re-connect to my wireless keyboard using blueman before I am able to use the wireless keyboard.
Is there any way that I can already auto-load bluetooth and connect to my keyboard before I log in?
recently I to come the Ubuntu 9.10 disk install and desire to do a clean in my macbook air installation problem is that this computer does not have a reader cd or DVD....
I wonder if there is any way to do the installation through a usb or I have to get an external reader for this installation, or if it is more easy install again my mac os x to partition the disk and do a dual boot
These are my laptop specifications:
MacBook Air (Rev A), 80 gb hd, 2 gb ram, graphics intel, one usb, one firewire
I'm trying to use an Apple wireless keyboard with Ubuntu 9.10 (Karmic) but the fn key is not working at all. If I start up xev and hit the fn key it generates no event. What do I need to do for it to work. It seems as if it should work when viewing pages like
[code]...
I am trying to put ubuntu an old imac with osx that a former customer gave me. I am not extremely well versed in Apple products but have been doing research intoy current problem. I have tried just putting in the ubuntu shipit disc I have, along with downloading and burning 9.10 text based and have not been able to get it to install. I have tried holding 'c' when rebooting, holding 'option' while rebooting it only gives me the choice of booting from osx), and holding 'control, option, apple, delete' as well to no avail. I then tried downloading Virtualbox and mounting the dmg and found out that my imac is not letting me mount any dmg's at all. Any guidance? Can I take out the harddrive and hook it as a slave to my pc and somehow install ubuntu that way and put it back in the imac? All I want is for the imac to be useful again as I was trying to make it into a stand alone dvd player.
View 4 Replies View RelatedI have a very urgent problem, its so bad I dont know what to do...I tried to install a dual boot, (os x and ubuntu). I could always boot with the Ubuntu CD, but now I can try everything (format whole HD to *free space* ) press "C" at start up, press "alt" and choose "windows" (ubuntu cd) everything does not help even resettingPRAM with alt+P+Rwhat I get is a BLAC SCREEN with blinking underline (always)Does anyone know what I can do to make my mac again able to install a ubuntu, it seems I ahvessed up my irmware..?? I just dont know how? (I once overwrote my MBR according to a thread here... (but I reformated now the whole HD to freespace with GUID partition table.....but still blinking underline when I want to boot the ubuntu 9.1 cd.
View 9 Replies View Relatedi have a ppc G4 with 10gb hdd and 512 ram and 350 processor. i have tried to install 6.10 alternate ubuntu package, that started to install but stalled at 6% installing software. i am now trying out 9.10 ppc alternate ubuntu package. it is going thro the install and so far so good, but again it stalls at adding software, it went to retrieve 858 files and stopped around 620.
ok so i re did the software install and it found all 858 files but then it reported it failed .... i carried on with the install but skipping the software install section, it has now completed whatever it was doing, rebooted and left me at a command prompt to login, which i can do ok.
I'm trying to install ubuntu on an old iBook G4. I have two cds (9.10 (not PPC specific) and 8.04.1 (the PPC specific version)) along with the G4 install cds. I've tried booting while holding down C, and I've tried to boot holding down option. When the boot menu comes up it does not recognize either one. I've also reset the PRAM.I've read a lot of guides, and look through this very thoroughly. I don't even want to dual boot, just Ubuntu.
View 7 Replies View RelatedIs it possible to install Ubuntu without uninstalling mac os X? Can I just shrink the OSX partition while I install Ubuntu? I don't have the OSX DVD, so I can't just reinstall OSX. I am running an iBook G4.
View 9 Replies View RelatedI run lucid lynx 10.04 beta (live) on an iMac G4 800MHz flat screen. How do I partionate an 80GB HDD?
In gparted I see 8 very smal partition exept the hfs+ partition. I have thrinked the hfs+ partition and made a 1GB swap, approx 50GB /home and 5GB /.
When I try to install Ubuntu say I need a new world partion for the boatloader. How fix it? first it say I need 8MB, then 1.8GB!
Is it 'newworld' or 'New world start partition' and what should bee the mount-point?
so i finally found my disk of ubuntu 6.10 that i know works. if booted fine and after the disk got formatted it proceeded to install. but to only gets about 73% through the install and then promptly crashes and when I tried it again it does the same thing.
View 5 Replies View RelatedI seem to be stuck on an loading screen of sorts after booting Ubuntu 10.04 from CD (the screen which shows the Ubuntu logo and 5 red/white blinking dots below). Boot options tried were: live, live-powerpc and check-powerpc (which showed no errors in the files)
View 4 Replies View RelatedSee this thread[URL]
View 1 Replies View Relatedi am now downloading the ubuntu 6.10 iso file its gonna take a hour i would like to know how u install it i know how to use disk utiltity to burn the iso file i just need to know how to install it My mac is a emac - 1.42GHz - 512Mb ram - 3 partitions in hd - 80gb mac tiger - 60gb - mac leopard -20gb Ubuntu I just need to know how to install it
View 6 Replies View RelatedI remembered about my old iMac G3 and currently had OSX 10.2.8 installed on it but its too old to support flash so no ..... or anything (why I stopped using it) I do remember gnash working on it along time ago when I had Ubuntu 4.10 installed, gnash is just really glitchy but that was quite a long time ago I used it so I'm only assuming they have made some updates as Ubuntu progressed.
I tried have now tried 4.10, 6.04, 6.10, 7.10, 8.04, 8.10, and 10.10 all for ppc using the alternate installer cause the desktop installer just makes the iMac restart when I tried it with 8.04 I think it was so I just stuck with the alternate installer method and EVERY one of those versions of Ubuntu fails to install the base system..
I don't know what it is or why this is happening because that is the same disc I used before with 4.10 and it now cant find a file, I tried re downloading 4.10 and burnt it again on my dads laptop (Toshiba Satellite with Ubuntu 10.10) at 8x on a CD (the iMac has a CD ROM only). I can't figure out what to do, I just downloaded the Desktop installer for 10.04 and the alternate installer for 10.04 as well and I'm going to burn both of those and see what happens.
Every install I tried to do I did a full whip to the hard drive so its a fresh install of ubuntu only. I thought maybe something was wrong with the hard drive now so I tried 10.2.4 again and it installed fine and wanted me to update to 10.2.8 again so I turned it off and tried 10.10 again and nothing is working. It's going on a week soon I've been messing with this old computer trying to get it working and everything is failing on me