Ubuntu Installation :: Can't Fix Monitor On Powerpc For 9.10 Install
Jun 29, 2010
I have a tray-loading iMac G3 that, after installing Ubuntu 9.10 (Karmic Koala) using the alternate installation cd, will go to a blank screen after booting. I know there is a way to fix it so that the horizontal and vertical refresh rates are correct to display what I need, but once it boots to a blank screen, and i go ctrl-alt-f1, it prompts me for a user name and password. I am 100% sure that I am typing in both correctly as i set them during the alternate install process, as I've done it twice so far, and caps wasn't on and I typed and retyped them to make sure they were correct. No matter what I try (even username: root, password: root, or username: admin, password: admin) it says login incorrect.
I saw that you can check the current user names and reset passwords by going into recovery mode, which I read you can get into by pressing shift or esc on boot, but on separate runs i tapped each key all the way from turn-on to the blank screen and no such option to go into recovery mode came up. Also, I try booting from the Live Installation CD, and when it boots to the blank screen, and i type ctrl-alt-f1, it gives me a neverending shower of Authentification failure's (as in they keep appearing down the screen, I can't type anything because it becomes interrupted by more Authentication errors). I'm at the end of my chain here. Any help would be appreciated. Either by getting me into recovery mode to fiddle with the passwords, getting it so that it takes the user name and password I set to it, or figuring out why the Live CD machine-guns me with Identification errors.
Currently this PC has Ubuntu installed on it and it barely boots from HDD but crashes at logon, and just loops back to the boot device select screen when CD is selected.
I'm wondering if there is anyway to install a version of Debian on the G5 using my windows 7 tower PC and a spare SATA HDD?
Specs: CPU : 2x PowerPC 970fx 2.0GHz (x64) RAM : 2GB DDR GPU : GeForce FX 5200 Ultra 64MB
I'm a big convert on using Ubuntu on my x86/x64 machines.I have a nice IBM Intellistation 185 Power PC (ppc) with dual 970 processors and 8gb of ram (and 3 SCSI 300 MB drives).I tried to install Ubuntu 9.10 on it (the PPC distro) and it gets to the boot prompt, asks me how I want to install (I can choose "live" or "install", etc..). No matter which option I choose (I've tried them all) it hangs after trying to start the kernel at "returning from prom_init".
NI've also tried other distros to see where that got me - Debian does the exact same thing as Ubuntu (which makes sense). Yellow Dog Linux actually will install and run fine(I'm writing this from Firefox 3 in YDL). Since YDL works, I'd think that a version of Debian/Ubuntu should be able to work.Any ideas on how to debug this and find out why Ubuntu won't install (or even run the Live CD?)
I am new using linux and don't have too much experience in terminal, however I am curious and work hard. I have an imac G5 powerpc with 2g processor, 768 mb ram and 232.7g hard disk. I recentrly installed debian 8.0.0 (jessie) with xfce environement. I have three other computers (two with xununtu runing and one with windows) using dropbox to sync all my work in differents places, so I use dropbox to get all synchronized. I don't want to change all the pc's to other cloud service, I would like to install dropbox in this machine.
I installed libnet-dropbox-api-perl, pear-channels and pho-dropbox packages from the synptic package manager with the hope to use dropbox...but I dind't even find something colled dropbox in the pc.
My question is: is it possible to install and use dropbox in this powerpc machine ? if yes, is there a tuto (for dumps) to get it ?
how to install vnc on a headless/monitor-less Ubuntu 10.04 ?i googled A LOT i couldn't find a well explained guide. i am not sure if this is the right place to post the thread. if it is not move the thread.
I recently bought myself a 22" widescreen LG monitor and am running Ubuntu 8.10 with it. Trouble is when I set the screen resolution to 1920*1080 which is the actual resolution of the monitor it shrinks the text and web pages to miniscule proportions.Text becomes tiny and web pages with firefox display as a column occupying about a third of the screen.I have to decrease the resolution to 1024*768 which makes web pages display better (at least they take up the whole screen)
Is there some way to install the proprietory drivers that came with the monitor? They are an .inf file on the supplied disc.I have a Nividia graphics card a GE Force FX 5200.I also have the 173.14.12 Nividia driver installed if this means anything to anyone.
the problem is: my monitor turns off when I want to install ubuntu! t's really pissing me off right now.Explanation:right now, I'm using Ubuntu 9.10, and I want to installUbuntu 10.04, so I made a bootable usb, and i booted my computeron this usb. so far, there's nothing going wrong. First, I had to select a language for Ubuntu, so I did that.After that, I had to choose want i want to do with ubuntu,so I selected (of course) "install Ubuntu".Then i got the loading screen, and after a short time,suddenly my monitor turns off
So my computer works reasonably fast running XP (old 3GHz processor with 512RAM), but every so often it simply freezes. I've tried all I can to fix this, but sometimes when I boot up XP it'll get to the window's logo then freeze, sometimes it'll get all the way to the desktop and then freeze, and sometimes it'll start up, run fine for an hour or two then freeze. By freeze, I mean the screen doesn't update, the keyboard and mouse do nothing. Updating NVIDIA drivers doesn't seem to help - some make it worse! So I've had enough, and decided to download Wubi to try Ubuntu on it. I'm not ready to remove windows just yet (lots of data on this machine) and so I don't really want to try dual-booting yet.
Wubi downloads and runs in Windows fine. When I go to restart, after picking Ubuntu from the menu it shows a little text (I think about installation, and press Esc for menu) then my monitor gives a "No Signal" message. So I try restarting (pressing the button), and pressing Esc to bring up the menu. I tried all 5ish options, and "Safe graphics mode" and "ACPI workarounds" seem to last longer, but the same error occurs, before it has even prompted me (still doing its own thing). So I can get up to GRUB, and even get into the grub> prompt. I tried adding irqpoll and/or all_generic_ide to the boot thing (pressing e in the grub menu), but that hasn't helped. I'm unsure of how to find what hardware my computer has (only computer, don't have receipt), but I know "NVIDIA GeForce 6600 GT".
I tried installing Ubuntu via the latest Wubi on my HP machine; AMD64 processor, NVIDIA GeForce 6150 LE graphics card. After restarting and selecting Ubuntu, my monitor (Viewsonic) told me it had no input, and proceeded to stand itself by. The computer sat there, turned on with no monitor, for about half an hour, and when I came back, windows was up. I tried restarting into Ubuntu again, got to the Grub menu, and selected Ubuntu before the same thing occurred. This time I didn't wait, but hard restarted it after a minute oh waiting. When I tried starting Ubuntu in Safe Graphics mode, I got through the initial bash bootup instructions before this occurred.
I'd like to install Ubuntu 10.04 but unfortunately I have and old Samsung low res (800x600) monitor and when I boot with the live Lucid USB pendrive the screen goes crazy and remains there forever.
I have been using Ubuntu for a while now on my netbook, however I have an older HP dv5 laptop that hasn't been used in a couple of years that I would like to format and install a linux distro on. Problem is that it has a very broken LCD screen and I had been previously using an external monitor with it. I had tried to install Ubuntu 9.04 on it at one point but could not progress very far into the installation due to the external monitor. I had also tried using the non-graphical installer but had little success with it as well.
I had thought of removing the HDD from the laptop and putting it into another of my laptops and installing it that way, but the specs are different between the two laptops and I figured that it would not work properly once the HDD was switched back to the older laptop. Is there any way to use an external monitor to install a newer version of Ubuntu? or perhaps is there another distro that is easily installed using an external monitor? My plan is to eventually remove the broken screen all together and only have the external monitor connected, the broken screen is a bit unsightly.
I've just installed Karmic and get an Out Of Range message on my monitor when starting.I had to use the alternate install in order to get Karmic on there in the first place.I have an Nvidia GeForce 7600 GS, and a BenQ FP767-12 TFT.
Output of lspci;01:00.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7600 GS] (rev a2)Not sure how to get my xorg.conf as I can only get to a shell. Here are (what I think are) the important bits;
I did a fresh install of Lucid Lynx, and now when I start up it shows a blinking cursor for a second or so and then my monitor shows an "Input signal out of range" error. The same thing has happened before, and I was able to fix it by editing the boot options in grub to include 'nomodeset'. However, this time the usual grub loading screen where I would normally press esc to edit the boot options doesn't appear. (Spamming esc doesn't seem to work either.) If it matters (which I have an odd feeling that it does) I partitioned the hard drive into an ext4 partition that mounts at / , a swap partition, and another ext4 partition that mounts at /home . I attached a screenshot of what GParted says about it.
I did a LiveCD to USB install, following the directions I found at [url] When I went to reboot to the USB stick, all I get is a black Screen (monitor is on and lit, just nothing on the display) No cursor or command prompt. I've tried holding shift to bring up the GRUB menu, changing splash quiet to nomodeset, or just adding nomodeset after the splash quiet thing. I've even tried xforcevesa instead of nomodeset still black screen. Looking at the logs nothing is current as of the last time I tried to boot the computer, it's strictly what was written when I installed it to the stick. Other things I've checked/tried, Pressing CTRL+Alt+F1 at GRUB to get TTY, all I get is that blank screen. I've Checked etc/default/grub to ensure the timeout was higher then 0. The Install CD seems to be OK but I have (as it did another install successfully) but I haven't done any throughal checking of it (there was no check this disk on the first screen of the LiveCD) The USB sticks also seem to be ok (in windows though). Using the disk utility on the live CD I did check the file system on the USB stick, the "/" partition came up clean. Anybody have any other thoughts on this install, any thing else I can check?
I've been searching the forums for a while and can find similar issues, but not the exact issue. So here it is: I recently downloaded the Fedora 11 x86_64 full install DVD iso and burned it to a DVD. It booted up fine and went to the "splash screen" (where you select options) with no problems. I first selected "upgrade or install." There was some text on the screen before the screen lost output ("no signal" displayed on my monitor.) I let it sit like this for about ten minutes hoping it would work to no avail. Next I selected "upgrade or install with default video driver" this time I got to the "check media" screen, checked with no problems, said continue, it said it was loading anaconda...then...boom, same problem
I cannot install Fedora core 10. It boots up and it gets to the Fedora 10 loading screen. After that it complains my monitor is out of Range and that's as far as I can go. I had originally thought I could get to some text install mode, but I don't make it far enough to do that.
I'm trying to install Fedora 10. I'm booting from a CD, and the installation gets as far as those 3 progress bars in the very beginning. As soon as they all load, my monitor goes black and starts flashing a "DVI Input Out Of Range" warning. That's all. I'm using a nvidia geforce 8800 gtx and the Planar PX3611W monitor.
I am trying to install Fedora 11, but the monitor that I am using is only 640x480. When the window comes up to start the install, I cannot see any of the buttons or tabs for selecting the items. How can I adjust the resolution so that I can see the entire image in my screen?
I have an F11 on an old box 686 athlon with an old nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] (rev 15) AGP. I am trying to do a network install upgrade to F13. I cannot get it to display the install menus from the network install disk. I get the initial screen with the install, basic video, repair, etc choices, but after I select the install/upgrade option, I see the CD drive read but the LCD monitor display never appears. The ready light on the monitor just keeps blinking and the display stays dark. Is there anyway of getting an error log to see what is going on?
I have tried 504 i386 and 505 i386 both downloaded on an Athlon on an Abit board 20Bb hd old Hitachi monitor both load, but do not complete the boot up they suddenly stop and the monitor goes off only the setup is ever displayed the hardware is working, i just had another system on it.
I have downloaded Debian/PowerPC_lenny from http://www.debian.org/distrib/netinst. The netinst CD or the minimal CD for some reason doesn't boot. When I put it in the CD-ROM it doesn't begin whatever it has to do. Do I need to do anything? I restart my iBook G4 (1.33 GHz PowerPC G4) several times and held the "c" button (for CD-ROM) but nothing has happened. I wonder if someone can help me begin the installation process.
FYI, I have partitioned my hard drive into two volumes. I would like to install Debian in one of them. I *do not* want my Mac OS X to get disappeared in the Debian installation process. So please help me if you would as to how I can (1) boot Debian minimal CD and (2) install Debian on one of the two volumes I have on my iBook.
I found this thread by looking up ultramon replacement: [URL] I would like to use "swapmonitor", to make it easy to move windows from monitor to monitor in a dual desktop environment. I have no idea how to install it.
how to get the Eclipse IDE to work on powerpc? I have Ubuntu 10.10 installed on an eMac G4 1.25, and installed eclipse CDT from the repos, which pulled in a ton of stuff with it. Starting eclipse results in nothing but the initial splash screen. A process called Java takes the top spot in the task list and sits there burning up CPU to max it out at 100%. It appears stuck there for good. It is a pretty virgin system except for the automatic updates. It was just installed yesterday.
I have OS9 and a PC with Win7. what is the best tool to burn the CD in Windows or OS9? I used Transmac on the PC but the G4 Cube won't boot from the disk though it reads it in OS9.
