emac is new to me and I want to create a panel launcher ie. icon shortcut but there are 4 choices and I don't know the difference in function or usage between them: emacs, emacs-23.2-no-x11, emacs-23.2-with-x11, emacsclient.I want to learn how to use emacs so which one of these versions do i choose?
View 11 Replieshow I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:
Three Ethernet Cables
Two Printer Peripheral USB Cables
The Two Computers
A 2GB Flash Drive
That is all I can think of right now. I do not want to use CDs. In a way, I would like to do a network boot. So, how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? I want to put Xubuntu on it, and earse the rest of the Hard Drive. The computers getting this are the iMac G3s and the eMac G4. The eMac has 256MB RAM, 40GB HDD, and a 700MHz processor. Two iMacs have 128MB RAM, 40GB HDD, and a 600MHz Processor. The other iMac is the same as the rest but has a 500MHz processor.
I was extraction some file through command line then I encounter on notification from winrar. This file exist what u want to do
replace
never
quite
I don't want that winrar will prompt me to choose action. Everytime whenever this situation occur it will overwrite / skip that file
Syntax I am using for unrar
rar e -pmypassword filename
I'm still to install Linux (waiting for a replacement of a bad DIMM) on my new box. It will probably be CentOS, following 'Rubberman's recommendation in forum/coffee-lounge/166195-distro-recommendation-development-use.html .
I assume (as I haven't installed Linux before) there could be a choice of file systems. Is there any recommendation on what I should/could use ?
I have a small script that uses the find command to look for a log file named: backup_log.txt. And then uses the first value in the log file as a variable in the script later on. However, say there are two or more of these log files located in different directories, how would I let the user choose which log file will be the one to use, and then make that (fullpathtofile) the value of the variable that will be used.
View 5 Replies View RelatedI want to do is this: choose the order (other than alphabetical) of the files that I burn to a disc.Brasero doesn't allow it K3b doesn't allow it GnomeBaker doesn't allow it Unless I am missing something, I can't figure out any way other than renaming all my files with a single number and/or letter at the beginning of a file name to choose the order of files. This blows my mind it seems like the most "no duh" feature that everyone would need in any Cd burning program. if I am stupid or if the software developers are stupid. (because I really can't see any other options) This is seriously so important (to me), that I will abandon Linux and go back to Windows if I can't do it.
View 9 Replies View RelatedIm looking to use PHP to list a directory. When I click on a filename, I'd like it to automatically remove the first 16 characters off of the filename and save it to the filesystem.
View 6 Replies View RelatedLast night I had to re-install Ubuntu. Previously, the header of the file manager had been configured up with the three buttons on the right for icon/list/compact view (see 1st image below), whilst since re-installing, they appear with the drop-down menu instead (as per the 2nd image). How do you change between these two formats? My preference is for the first of these.
View 2 Replies View RelatedI'm trying to install Debian Jessie beta2 on a UEFI laptop. The installation worked just fine before with setting in manual partitioning an EFI system partition and a root partition.But when I try to partition with root as an encrypted volume I get this error when I wanna write changes to disk:" the attempt to mount a file system with type vfat in scsi1 partition sda at /boot/efi failed"When I choose resume partitioning the installer then freezes at "detect file systems".
Because my harddrive needs specific alignment I've made beforehand in gdisk:EFI System Partition of 100mib at /dev/sda1/boot partition of 512mib at /dev/sda2/ (because I expect the installer to want a /boot too for an encrypted device)rest of harddrive reserved for root at /dev/sda3
For some reason the general launcher button (+ in circle) in the unity menu has disappeared. I do not know how to restore it. Which means I have great problems to start al apps that are not standard in the menu.
View 1 Replies View RelatedI have this file AlienFXLite-0.4b.jar in this directory /home/laura/AlienFX that I open/run with this command sudo java -jar AlienFXLite-0.4b.jar Instead of using the terminal every time, I'd like to make a launcher. How can I do this?
[Code]...
How can I resume a stopped job in Linux? I was using emacs and accidentally hit ctrl-z which blasted me back to the console. I can see it when I type 'jobs'
[*****]$ jobs
[1]+ Stopped
emacs test_queue.cpp
I have downloaded the Ubuntu 10.04 alternate PPC to install on my old emac.
It starts fine the installation process, and I want to have only Ubuntu on this machine so I erased all the mac partitions and create 3 new partitions
/ = root
swap
and /home
Everything goes well until I get the message that there is not a partition called Apple_bootstrap and I get stuck there.
I snagged the 10.10 alternate install ISO for PPC and got it up and running on a 1ghz G4 eMac with 1gb of RAM and a 60gb HDD. It runs... OK. It could be a lot better. I'm planning to shut off the bluetooth and CUPS services since neither apply to this system; are there any other services I can shut down, or any other tricks I could do to make it run a bit more smoothly?
What about alternate window managers? I realise that the PPC platform kinda limits me, but what about TWM or FVWM?
I have an emac powerpc that runs Mac OSX version 10.4. I am having trouble booting from a live cd. Holding down C does not work an I have tried different commands in open firmware and none of them work.
View 7 Replies View RelatedI have a java.jar (PCGen) that only works correctly if I run it with sudo from the terminal. I have to cd into its directory and run it as
Code:
sudo java -jar pcgen.jar
I would like to use a menu launcher instead of having to use the terminal each time. I tried
Code:
sudo java -jar /path/to/file/pcgen.jar
No luck. This .jar only works properly if ran as root, is there any easy way to do this?
It doesn't matter what theme I use, the AWN file browser launcher applet always looks the same...I strongly dislike inconsistencies.
View 6 Replies View RelatedHow can I make Compiz work on this eMac? It's the original, 700 MHz, 1 GB RAM, Ubuntu 10.04. It was enough trying to get the xorg.conf file to show any video, but now I want to be able to use compiz so I can have a faster experience.
View 4 Replies View RelatedWith my ubuntu iso in the dvd drive, I do not get any boot from options for it to be used as boot drive within the boot order from the boot control panel. On startup with the alt key pressed I only get the Mac drive but when I change the boot to the other option (network) and press the alt key on startup, I get the boot order screen with the Mac HD and also the Ubuntu iso but cannot get the Ubuntu to highlight and use, just the Mac remains highlighted. On the same screen I get a very small wrist watch to the left of the screen that the mouse can move up and down but not to the side.
I am using a windows usb keyboard and usb mouse, I have used all manner of keyboard combinations to get the Ubuntu disc to highlight but nothing seems to work. Within the drive section, the "My Mac" drive is locked and cannot partition it or change anything about it. Has anyone any ideas that I can try? I did not want to get a Mac keyboard and Mouse as yet seeing as I wish to change the operating system to ubuntu.
I recently came into (temp) possession of two Original, white, 700 MHz eMacs. I have only started to play on one of these so far. Installed Ubuntu 10.04 PPC from Alternate Install CD - two times actually (because I thought I may have screwed something up the first time), but both times it seemed to go without a hitch.
After install and restart, I cannot drop into a shell, all I get is the black screen. I'm probably forgetting something really obvious, but I've tried Holding "Shift" and "F1" and control+alt+F1 (and F2, F3, F4, F5, F6), tried the esc key; with two different Apple USB keyboards. I'm really just wanting to load an xorg.conf file and reboot.
Should I have been trying to do this just after install, but before restarting? I can get into Open Firmware just fine, but have no idea what I'd do from OF except start off the CD again. I should mention I installed Debian just fine and am pretty confident MintPPC would work flawlessly, but I am trying to get Ubuntu 10.04 on here.
I've just started out learning to program and I'm making a "Radio Scheduler" for my brother as a mini project. I wanted to make an "install" script, which would add an item to Ubuntu's Main Menu. I believe all that is necessary is to create a .desktop file and place it it /usr/share/applications/? This seemed to work fine when I tried it out on 10.10, but I've now tried it on two 10.04 systems (one virtual) and despite it being in the applications folder (so it moved in okay), it isn't showing up at all in the menu. code...
I'm not entirely sure about some of that (categories for instance), as I just used another file as a reference. But it seemed to work fine on my 10.10 system, so I don't understand why it won't show up on the others? Should be in Sound & Video if I'm correct... I'm still pretty new to Linux, so sorry if I've got anything completely wrong.
I installed the powerpc version of Debian Squeeze 6.0.1a on an eMac. According to the Wikipedia article, these systems had an nVidia geforce2 MX graphics card, and the system is using the Debian open nVidia drivers from install. I've gotten everything working on it, except the graphics are off. It's acting like either it can't handle the resolution or all the colors and looks a little like it wants to run in 256 colors. It's not unusable, just annoying. I know that it can handle a normal resolution because it was doing fine under Mac OS X puma before I wiped it and installed debian (I put debian on it because I needed a modern web browser, and the ones available under that version of Mac OS X weren't doing the job). I went to the nVidia website, but they only have the driver for x86 Linux. I need it for the G4 powerpc. Any ideas? I'm used to running Ubuntu on x86 machines, so the powerpc thing is throwing me a bit.
View 4 Replies View RelatedI have tried eject /dev/cdrom, sudo eject, pressing the eject button but whenever i do , it just opens for like 1 second then closes right back. is this fixable within Xubuntu, or is this a physical problem with the cd drive?
View 4 Replies View RelatedHow do you access preferences for changing size of the launcher bar or icon size, etc? I looked through system settings and could not find it.
View 4 Replies View RelatedIs there anyway to make Nautilus have a "Create Launcher" item under the File menu? Is there some plugin I can install or file I can edit? Launchers are very useful but always having to create them on the desktop first then move them to where I want is pretty annoying.
View 3 Replies View RelatedAfter upgrading to 11.04, I noticed something strange, being that when I want to drag a file or folder from one Nautilus folder window to another which is not visible, I can no longer hold the item over said folder's taskbar button and wait for it to appear. It just shows the + for copy, and when I let go (which I have no choice but to eventually do), it creates a launcher to that item (I assume it's doing that, and not actually copying there, but the + has me unsure).
I've looked in Nautilus's preferences to see if this is some new behaviour that I can revert back to, but could find nothing there.
I'm of course using the Classic desktop with bottom panel being the taskbar. If you know how I can rectify this, please let me know, as the times I would want to create a file or folder launcher without the usual hassle would be rare, but I am constantly dragging stuff from one folder to another, and it would be a real pain to have to line up source and destination folders each time.
I tried to add a new launcher to a xfce panel on an Ubuntu 9.04. The problem is that I want to create a launcher for a .txt file - and the launcher does not give me the option of choosing "type". I read the following:
[Code]...
My system boots, I login and am brought to my desktop. I click on the file system icon in the launcher to open a Nautilus window. The window opens, but is unresponsive (i.e., I can't move it, clicking on the icons does nothing, etc.). If I press the super key to get the dash and the press escape, the window becomes responsive again, just like normal.
If I open a folder in the window, the window becomes halfway unresponsive in that I can't move the window, but I can select more folders and toolbar icons. The top menu no longer appears at this point, and I can't access any of the system icons on the top right of the screen. Alt-F4 closes the window even if the close button doesn't work.As another example, suppose I open a Nautilus window and then a Chromium window. Both are immediately unresponsive. If I super-esc again, I can move the Chromium window around, and it seems to work normally. I can click on the Nautilus window, but it always stays greyed out. Even if I'm clicking on things in it, the Chromium window always has focus.
I had a similar experience to this with VLC and Chromium. After clicking around enough I eventually got it to the point where VLC apparently always had focus, but I couldn't access any of VLC's controls. Double clicking anywhere on the screen fullscreened the video, and that's all I could really do. Not even escape worked to bring it back.I can usually press super to get the dash and Alt-F2 to get a command prompt. Also Alt-Shift-T seems to usually work to bring up a working Terminal (at least one that accepts commands, even if I can't move the window).Does anyone have any ideas on what might be causing this? The behavior is highly unpredictable and extremely frustrating. I should note that key commands don't always work, even though they seem to in my examples. So I don't think it's just a mouse issue.
I am planning to do a full install of Ubuntu 10.04 on my eMac G4 Power PC (PPC). It has 512 MB of RAM, 40 GB of space, and its running Mac 10.4.11 Tiger.
I need help booting off the DVD. Can anyone Give me a guide on how to install Ubuntu 10.04 on a old eMac G4 Power PC?
I plan to install this instead of the Mac OS because it is very slow and buggy.
I am putting ubuntu onto a ppc (emac 1.25Ghz) and I was wondering weather to go with the last officially supported release (6.10) or to try the newest (10.10)?
The machine will only be used to play music and brows the web, nothing heavy but it MUST play flash content (primarily from .....). I have had varying degrees of success on an older G4 ppc (700 Mhz) but never got it to play flash. are the open source alternatives to flash any good on the machine?