General :: After Installation Of Virtual Box When Rebooting Black Screen
Jul 6, 2011
I have installed virtualbox because i wanted to run .exe files for my job. After installation and configuration it asked me to reboot. From that moment when reboots it returns the full symbol of fedora and then the screen becomes black with white letters. I couldn't login ever again. I am new in Fedora, i don't have a backup of my files and i cant't work. I think that this could be a command line or something like this. Is there any possibility to login even once to copy my files to another disk and then to setup Fedora again?
I installed Ubuntu 32-bit v. 10.10 on a Dell Optiplex GX270, after installation i had to reboot, but then when rebooting it just goes to a black screen with a flashing
I was playing Minecraft last night when the screen went black. This is apparently a known issue when you're using the wrong java version or something, and I've gotten this crash in the past, but I've always just restarted to get my computer back to normal. However, when I restarted my computer, the monitors would not get any signal from the computer. They just stay black. I tried restarting, shutting down all the way and turning it back on, and nothing works. The computer just stays completely black.
I tried turning on the computer then SSHing into it, but it's not working. I'm not sure if I had it set to auto log in, so it might be that I'm not logged in, or it might be something more insidious, but as I can't see what's happening I don't know what the problem could be.
I am new to slackware, but not new to linux. I recently installed slackware 13.37, and am enjoying it very much so far. The most annoying problem I currently have is that, after starting X, I cannot switch to a virtual terminal or even end X without having a problem. For instance, from the GUI if I hit ctrl-alt-F1, instead of going to the 1st virtual terminal, the screen fades quickly to black and does not return. I have not been able to make any progress on this problem, so any input would be greatly appreciated.The only thing worth noting really is that I'm using Fluxbox as my default window manager. Other than that I haven't done a lot of modifications to the base system other than installing some basic packages, but I had this problem since booting directly after installation of the os.
After upgrading my Debian from Lenny to Squeeze a few things don't work properly. Most disturbing is that after one switch from graphic screen (x, Gnome) to the virtual consoles this can be observed:
1) The virtual consoles show only a small font. It doesn't change when I use 'dpkg-reconfigure console-setup'. Otherwise everything seems to function properly, but then
2) I return to x (with Alt+F7), and if I again want to reach the virtual consoles (with Alt+String+F3, this is a laptop) the screens are persistently black; nothing works, except Alt+F7, which allows me to go back to the x-screen. In this graphic screen it is possible to use the consoles without problem.
3) I have some trouble shutting-down the computer. The screen disappears, everything goes black, but the computer goes on and does not shut down until I press the power-button, forcing the shut-down process. If I press the keys which would bring the computer to a halt through the virtual consoles, I can bring it to stop allthough the screen remains black throughout the whole process. I press: Alt+Strg+F3 to reach the consoles, there 'root + password', Enter, halt, Enter. Nothing at all appears on the screen, but after a while the computer stops.
It is my first time to install fedora 13 and touch linux system.
I burn the DVD edition to install offline. The installation completed and rebooted the system. However, the process stop at the startup screen. And I press escape and find that the process stops at following line: Starting Avahi daemon ...
I don't konw what this line means and how I can deal with.
My computer specification: CPU P4 2.66GHz RAM 512M DDR400 Motherboard GA-8IPE775-G Display Geforce 6200
However, I anyways went for reinstalling kubuntu 10.04. The installation went fine. It asked to reboot at the end, which I did. After the reboot, it gives me the login screen. After filling up the details there it again shows me the same login screen. This goes on forever.
I've just installed Zorin OS onto the hard drive of my Dell Inspiron 8000 laptop. I used the entire drive, overwriting Ubuntu9.10. Now my screen is black. I think the system loaded correctly - I can hear some welcome music and the active l.e.d. of my drive slows and stops flickering. But I can't see anything!Here's what I tried:
- using the keyboard controls to increase the brightness (no effect). - connecting a flatscreen monitor from my desktop and attempting to use the FN+f6 keys to change the display from the laptop screen to the other (no effect) - rebooting - rebooting into Setup (my laptop screen lights up for perhaps 5 seconds and then goes black again) - rebooting with Ubuntu 9.04 CD in the drive (no response) - attempting to reboot with my original Windows ME re-installation disc in the drive (no effect)
Dual boot installed Redhat enterprise linux 5 with windows 7 on a 64b machine. On reboot after loading some files the GUI doesnot show only a black screen and nothing happens.
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
I just downloaded Fedora 10, burned the CD, installed the program, etc. Everything went just fine, but after rebooting the screen turns gibberish, totally unreadable. I now it's the video card, NVIDIA but how do I fix it? I installed Fedora 8 which worked just great, no issues. My machine is Intel Core 2 7300, Geforce 9600GT my other machine, is AMD-64 5000, Geforce 9500 GT, same problem happens when trying to install Centos 5.
I have just upgraded from ubuntu 9.04 to 9.10. After rebooting my computer i found that the background is now plain black. I have tried changing it in the appearance settings, but no matter what I change is to it stays black.
I have a rented vserver running at Strato [URL]. It came preinstalled with Debian 7. I upgraded it to Debian 8, what seemed to run fine, all services running. The problems came up when I tried to reboot the server to test the init system. It just does not come up, I cannot ping it, nothing. I can boot into the rescue system, mount the system partitions and chroot in to the filesystem. In this state I also can run my services, including apache2 and mysql. In the syslog I find nothing about the reboot. Now I need to reboot ino the normal system. I already tried to resume to sysvinit without success.
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e, 4 gig of corsair dual ram, ati 4850 graphics, onboard audio. ahci mode win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2, i had this configuration running fine for 2 months without boot loaders, on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
i am fairly new to Ubuntu. i was using it fine for a month, but today, when i booted my computer up, it came up with a black screen instead of the normal purple ubuntu screen. the black screen had white text on it, and asked for my username and password. from there, it was a terminal prompt. i have been google searching for a while, and have tried typing "startx", "sudo apt-get install ubuntu-desktop", "sudo gdm", and i have also tryed uninstalling xorg, and reinstalling, and none of these things wanted to do anything for me.
I've been a happy Arch Linux user for years now. Recently, on my eee 1000he (an Atom netbook with intel GMA graphics) I've been seeing strange things. After it has been on for some time (usually hours), the screen starts to jitter, just for a fraction of a second, every now and then. After this has happened some times, the screen goes black (one time it went red). The backlight is still on and I can still ssh to the machine which reacts normal appart from the black screen. I can only regain the screen when rebooting. What could this mean? Is it hardware or software? X logs don't shown anything weird, where should I look? I haven't found anyone with the same problem on the net.
Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
I have spent the better part of 2 days perusing these forums for assistance. Here is the short story:I run a 7 year old custom build with a 82865G Intel Chipset and a NVIDIA FX5200 graphics card. Had been running a sluggish XP and after adding 2GB of fresh RAM wished to start fresh with my old friend, Ubuntu.
I've tried 10.04 LTS with and without my NVIDIA card installed with no luck. I have successfully installed 10.04 using the alternate install, but this also goes to black. I can hold shift to see GRUB and play around there, but no luck so far. I've also tried 9.10 but have not gotten past the pulsing Ubuntu image. I've seen plenty of support for NVDIA and Intel onboard graphics chips suggesting boot commands like nomodeset and i9015.modeset=0/1...it's all falling short.
I'm heavily leaning towards just installing an earlier LTS or a different linux distro all together. If there no one can help me debug, maybe someone can suggest a distro that will make me happy.
I've installed ubuntu 10.04 onto my Dell Latitude e6510 (through the wubi installer), but I can't get anything except a black screen. I'm pretty new to ubuntu, but after a bit of looking around at graphics issues I found a bunch of boot parameters and tried different combinations of them. i915.modeset=0 Gave me the purple loading screen, until the screen went black and I got flashing caps lock and scroll lock lights.xforcevesa gave me a completely black screen -- not receiving power at all
I also tried noapci, acpi=off, irqpoll, and pci=routeirq as parameters. None of those had any success.I've also tried letting ubuntu boot with a black screen until I heard the African drums and pressing Ctrl+Alt+F1 to go into the console, but the screen stayed black then as well.
I installed F12 with the i686 KDE livecd. A black screen with a blink "-" appeared after the bios information on the first reboot. The computer does not respond to any key input except "ctrl+alt+del", which restarts the computer.The machine is a dell inspiron 6000 with inboard 915gm video card, and the bootloader was written to the harddrive mbr. Any help would be highly appreciated.I need to be more clear. Installation went fine, problem appeared on the first reboot.
After the upgrade from 9.10 to 10.04 resulted in a black screen after reboot, I decided to don't waste more time, backed up my data and made a fresh installation.
First Issue [solved]: After I inserted the Kubuntu 10.04 Live-CD and started the system, I got to the CD's boot-mode selection menu. When I selected "Install Kubuntu", I got the Kubuntu bootscreen, but the system hang up then. I was able to solve this problem through pressing F6 in the boot-mode selection menu and setting "nomodeset". I also had to remove "quit splash" from the boot-entry line. Afterwards the installation process was fine.
Second Issue: I wanted to boot my new installated system, but, off course, got the blank screen again. So I edited the Grub-entry for recovery mode in the grubmenu (replaced "quit splash" with "nomodeset") and booted into recovery mode. I selected "netroot", and installed the proprietary nvidia-drivers with "apt-get install nvidia-current". Afterwards I ran "nvidia-xconfig" to generate the xorg.conf. To solve the blank screen issue, I edited the /boot/grub/grub.cfg the same way I described above and rebooted. Now I don't get a blank screen anymore, but I also don't get an XServer. The system boots now (off course without splash and "unquit"), but drops me into the tty1... When I type "sudo service kdm start", I get into KDM and can login, but I get many errors and crash-reports there. I also don't have any internet. I only have internet when booting in recovery mode and select "netroot".
I'm a bit surprised that Ubuntu released a LTS-Version that causes so much trouble (I've searched the forum and it seems that I'm not the only one with such big problems). Has Ubuntu droped support for NVidia-users?
After I upgraded F11 to F12 on an x86_64, the new system boots and the daemons come up, then the screen goes black and the computer restarts. But then it won't boot at all. It just keeps restarting.It could be a monitor driver problem. The one time I managed to press "I" fast enough to bring GRUB up, I tried adding "nomodeset". Nothing changed. The monitor is an HP 2009m, so it should not need "nomodeset" anyway. Xfree86.cf has not changed from F11 to F12.
I have a full DVD, so I can bring up Rescue Mode. I had hoped to find clues in (/mnt/sysimage)/var/log/messages, but nothing is being written to it. Once after I rebooted off the hard disk from Rescue Mode, I witnessed a long SElinux conversion. That disquiets me. But disabling SElinux does not solve the problem either.Can anyone suggest some kernel options that might overcome this problem? I shrink from reinstalling F11 from scratch and having to restore all my files from my backup system!P.S. I just found in my personal X11 log a message to the effect that /usr/lib64/dvi/nouveau_dri.so is missing. So it is; the directory has 12 drivers and not this one. If I remember right, "nouveau" often figures in trouble reports.P.P.S. As myself in Rescue Mode I can use xinit to bring X up! But it has only a vanilla text window and no mouse cursor, so I cannot use it or get out of it.
I have downloaded Last version of Ubuntu 11.04 and installed it. The installation went correctly with some flickering in display during installation. But the real problem starts after installation, when I turn on my PC and select Ubuntu from GRUB, the screen flickered a lot and then went black and PC got hanged.
i just installed ubuntu 10.10 in my e-machine d730z, intel pentium processor P6, intel hd graphics, 2GB DDR3, 250 GB HDD. After installation im getting a black screen http://img684.imageshack.us/i/img05711m.jpg/.'m still new with ubuntu and by the way, after a minute, the screen goes black. i cant see the text.
