I have successfully mounted my Win7 volume and my external hard drives NTFS volume as well. However, after modifying the fstab I seem to only be getting the win7 volume to auto-mount. Below is the contents of my fstab. /dev/sdf3 is not mounting. Again, it works no problem if I manually mount it.
Have a 1TB external USB hard drive I want to use on both Windows and Linux (Mythbuntu 9.10), so I thought the easiest way would be to format it with NTFS. Installed the NTFS-3G package and I'm able to read and write to the drive fine from Linux, however I have a few questions;
1) How do I configure Linux so that when it mounts the NTFS partition it is writeable for user, group and other (bascially I want everyone to have read and write access)? Currently when the NTFS disk is mounted the permissions are restricted to the user only and I suspect I'll need to edit fstab for this, but don't have much experience here so need help with the specifics.
2) If my Linux PC is turned on with the external drive attached, the disk is not mounted until I double click on the icon on the desktop. Is there anyway I can configure Linux so that it will automatically mount the external disk when booting?
Below is what is in my fstab file at present;
# /etc/fstab: static file system information. # # -- This file has been automaticly generated by ntfs-config -- # # <file system> <mount point> <type> <options> <dump> <pass>
How do I configure my Debian installation to mount external USB drives to mount points based on the volume names of the drives? For instance, if I have a thumb drive with the volume name of "SWORDFISH," how do I have Linux mount it at /media/SWORDFISH? I'm aware that this can be setup in FSTAB, but that requires that I know the UUID of the device beforehand and that I take the time to set each external device up in FSTAB first. That does nothing for me when I have a thumb drive that has never been plugged into my computer before.
This seems to be setup by default in Ubuntu/Kubuntu, but is not working for me with a fresh installation of Debian Squeeze and KDE4. I've spent the past 2 hours Googling for a solution and have turned up nothing. UPDATE: My results are inconsistent. Sometimes Debian mounts devices to mount points based on the volume names, and other times it gives them generic mount points (e.g. /media/usb1).
Nautilus mounts NTFS partitions when I acces them, and before mounting, it asks for root password. Is there a method to auto-mount ntfs partitions on Debian startup, without requiring root password each time they are automatically mounted ? And without installing additional packages.
I am running wheezy + xfce. When I attempt to mount any external volume in Thunar, I get a message saying "Unable to mount-- not authorized." This is problem #1. A bigger problem that I think is related is my wireless. Logged in as a normal user, I cannot connect to any wireless networks using network-manager. My wireless card is functional and I can see all the networks around me, but when I click on one to connect, nothing happens. No password prompt, nothing. Strangely, when I log in as root, wireless works flawlessly. I am a member of the netdev group.
I bought a new external HDD - a Seagate 2 TB (actually 1.8 TB) but am unable to mount it. The drive is USB 3.0 while the ports on my system are USB 2.0 but that is NOT the issue. I am able to see the HDD without an issue on the CLI. I am on Jessie 64-bit.
Code: Select all$ lsusb Bus 005 Device 003: ID 0bc2:ab24 Seagate RSS LLC Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
My question is why it does not automount. Also if I should try to manually mount it, how should I go about it ?
I got the disks pre-formatted in around 500 GB (or as close to it) multiples as can be seen.
The other question is why does /dev/sdb4 show some different dialog than the rest ?
I am trying to mount an external USB hard drive. I'm using Debian Lenny 5. I tried to right-click on the hard drive and then select the mount command inside the gnome desktop environment but it gives me an error. Is there an easy way to mount and unmount this hard drive? The hard drive itself is formatted from the factory in NTFS. I'm going to leave it in this file format is a need to use it with Windows machines as well.
When I plug in my external USB Hard drive which is formatted as a single NTFS partition, it is recognized and mounted automatically, a nautilus window pops open. Unfortunately it is not writable. The reason is: the partition is mounted "ntfs" (which lacks write support) instead of "ntfs-3g". This is the output of mount after plugging in the drive:
$ mount | grep sdc1 /dev/sdc1 on /media/4EBC5FB82435B0EE type ntfs (rw,nosuid,nodev,uhelper=devkit,uid=1000,gid=1000,dmask=0077)
I want this partition to be writable by just plugging it in.
The partition should not have any errors because a) I fsck'ed it windows and b) mounting it manually works:
$ sudo mount -t ntfs-3g /dev/sdc1 /media/disk_/ $ mount | grep sdc1 /dev/sdc1 on /media/disk_ type fuseblk (rw,allow_other,blksize=4096) $ devkit-disks --mount-fstype ntfs-3g --mount /dev/sdc1 Mounted /org/freedesktop/DeviceKit/Disks/devices/sdc1 at /media/4EBC5FB82435B0EE $ mount | grep sdc1 /dev/sdc1 on /media/4EBC5FB82435B0EE type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) $ gnome-mount -nbtd /dev/sdc1 $ mount | grep sdc1 /dev/sdc1 on /media/disk type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
How can I get ntfs drives to be mounted as writable by default, preferrably without having to modify fstab?
I`m unable to mount my second hard drive I use to store my music and pics and wonder if it is to do with the error "failed to initialise HAL!" which I get every time I start Debian Lenny (AMD64 architecture). I have had this since doing an install (fresh) a few hours ago.
The drive is an ntfs one but when I click its icon in the computer section it says it cannot mount it and gparted says it cannot read the file system.If so how would I get the error box to stop appearing and how do I mount the ntfs drive?
Whenever I mount any of the ntfs volumes, instead of opening the volume, Rhythmbox starts automatically and scans volume for media files. It has nothing to do with media files as it starts even when there is no media file in the volume.
I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
Currently I have a dual boot system it consists of Fedora 12 and Windows Vista, at this time when I am logged into fedora 12 I can select the windows vista partition in the f12 file manager, I am than prompted for the root password and after entering the password, the drive mounts as read/write with no problem. How can I automate this mounting process so once I login as a standard user the NTFS partition mounts without any input? I would like this to auto mount without prompting for a password or having to double click on the vista partition each time.
On my laptop I have Windows and Ubuntu, and I use Ubuntu very often. How can I auto-mount the NTFS partitions once I run my Ubuntu without the need to manually ask to mount it and confirm with the root password each time and for each partition?
I use Ubuntu 11.04 (gnome) and have a ntfs partiton that shows up in the "places" menu that is normally in the gnome panel. But I think that partition isn't mounted till I click on the entry in this menu (when I want to access it from any other place, shortcuts for example, that doesn't work). How can I correctly mount all partitions I want on startup? Recently I tried something in the /etc/fstab file but don't know if this is correct...
I have a windows partition on my drive, and I want to access it without having to mount it first, etc. There are just two partitions, windows and Ubuntu. I am running Ubuntu 10.04.1 so I want to mount it on startup. I saw this article: [URL] but I don't know if what it describes will work as it's almost 2 years old. I'm not adverse to commands, in fact would probably prefer those.
I have a dual boot setup with a fair amount of files in my windows volume. I noticed that the Ubuntu 10.4 GNOME version (at least) does not auto mount my NTFS drive. Of course as I have seen from various post this gets annoying when opening up a program that loads previous files before I for ex, click the '110GB FileSystem' icon from Nautilus or similar...that seems to mount it for me then... I want my 110GB NTFS volume to mount automatically so I dont have to do this process everytime I reboot.
I found a post on the forum (the latest one I could find) below that recommends installing ntfs-config. The post is from May 2008 but mentions 10.10 (via edits) so I'm confused and wondering if there is an easier/default way..or this is still the way to go? After several screw ups editing system files manually, Im very cautious about doing it in this case because its a work computer and frankly the uninsttall or editing the fstab manually worries me.
I have a 2nd hard drive that I have encrypted using true crypt. Is it possible to set this up with key files (or some other way) to auto mount when linux boots. I need it in true crypt because there are some work programs I dual boot to use in windows, and need to have access to the drive in XP from time to time, and true crypt can mount there as well. But 90+% of my time is in linux and I would like to have it auto mount through fstab (or whatever way it needs to be). My entire linux setup has been set up with encryption through dm crypt and LUKS (except for /boot). So I would think having a key file stored on the computer and an auto mount fstab would be just as secure as however secure my LUKS setup is. So any way to auto mount a true crypt 2nd drive volume?
issue is with 10.04 installed via wubi on a xp pro ntfs drive.Have setup a new installation of 10.04 and been running it a few months.Update Manager came up and I said ok.Then after rebooting, this is what I get and I have found many SIMILAR but CONFUSING threads, so I don't know where to go from here and how to fix it.Grub flashes, and then this is what I get:Mount is denied because the NTFS volume is already exclusively opened.Use the fuser command.
Could not mount the partition /dev/sda1 run chkdsk /r (filesystem = ntfs, error code = 16)
I recently installed Ubunutu 10.04 Netbook Remix onto a Dell Vostro A90. During install I selected "Require my password to log in and to decrypt my home folder", and this is working great.
What I would like to figure out, is how to have a second encrypted volume that lives on my SD Card that is also decrypted automatically upon login.
I've tried a variety of things, but they all require me to re-enter my password at some point during the boot/login, once for user login and the other time to decrypt/mount the volume. I am trying to avoid this, and hopefully will only have to enter my password once. Maybe I can piggyback on the default Ubunutu home directory decryption and make it all appear seamless?
I have WD external 1TB USB 3.0 drive that I want to attach to a RHEL 5 computer. I don't want to format it to a FAT32 as I'm copyong over about 530GB of data. What is the easy to get the RHEL OS to recognize this drive? NTFS is not loaded on this system as I already checked.
I have a problem that i have tried to solve for a couple of days.server with some internal disks. Those disks are for the core-system and some file server related stuff.Beside the server i got two external LaCie boxes that contains 4x1tb disks each. The disks inside the boxes are RAID5, so the system sees every box as one whole "disk".Now to the problem. I just canï¿½t get those "two" RAID cofigurations two be auto mounted at boot. I have tried to put them in /etc/fstab with a whole bunch of different options but nothing works. The system sees them but don't auto mount them, and i can manually mount them without any problem at all. I have tried to "google" the problem but can't find any similar
The solution may to my problem may exist elsewhere, but I had trouble searching/finding it.I just bought a new external drive. The drive is formatted as ext4. I use it mainly in esata mode. Whenever I connect it, it mounts to /media/[UUID], where "[UUID]" is the UUID of the drive. I want it to be located at /media/backup when it is inserted, not in relation the UUID. I have tried putting a new line in my fstab (mount by UUID to folder) to mount the drive. It mounts correctly if the drive is connected to the computer and turned on during startup, but if the drive is off/not connected during startup Ubuntu barks at me. (I press 's' to skip mounting the drive) Is there a way to make external/removable drives mount to a certain location other than /media/[UUID] when they are inserted? I want the drive to mount to the folder while the computer is running, not only during startup.
I have an ntfs external hd; I can mount and use it fine, without entry in fstab, but not share stuff. That is to say: I can use nautilus / thunar to share folders on it without errors, but they are not accessible via the network. The issue may be that the mount point has permissions 700. I can solve that by Code:sudo mount -t ntfs-3g /dev/sdb1 /media/Databank -o umask=0,nls=utf8or by setting umask=022 in fstab, but then I can't mount it as user anymore; if I set fstab to
Code: /dev/sdb1 /media/Databank ntfs-3g user,umask=022,nls=utf8,defaults 0 0 I get this when I try to mount it as user in the filebrowser:
I have 500GB external HDD. I have to mount it my CenOS -4.8 Machine.(kernel-220.127.116.11EL 32-bit) . External HDD partitions are ntfs file system partition. I have tried to mount ntfs partition in linux . But it's not done.
I'm having problems mounting my NTFS external hard drive .
1.padlock: VIA PadLock Hash Engine not detected. 2.PPP MPPE Compression module registered 3.PPP BSD Compression module registered 4.PPP Deflate Compression module registered 5.npviewer.bin: segfault at ff99cd48 ip ff99cd48 sp bfc8afac error 4 6.usb 4-2: new high speed USB device using ehci_hcd and address 5
my external HDD of 750GB bring me an error during mounting!it asks me to get to windows and reboot twice or cmd chkdsk/f of which when i do it only option comes is to format it, i do not wanna format it coz it's with a lot of ma useful data!am using debian just asking if its possible to retrieve ma data from it using commands persay and what are those
I upgraded Ubuntu 9.04 to 9.10 desktop a few weeks ago and an external USB drive that was mounting at startup on 9.04 is no longer mounting on 9.10. If I unplug the USB cable and plug it back in it comes up. The issue is strange in that when a regular non-admin logs in the drive auto mounts but does not for an admin login. I have not been able to put together search results that would lead me to a hint of why this would occur and/or what aresolution may be.Why would the drive auto mount when a regular user logs in but not auto mount for an admin? When I say admin I guess what I mean is a user with more privileges such as member of the admin group.
I press On-button, Debian boots, logs in and automatically connects to the Wireless network AND! to my local pc via LAN. It runs an ssh server, so I can ssh into debian over internet and communicate with the local pc (send a magic packet).Here are my problems:
1) I don't how to log in automatically. This and this doesn't work. 2) I need a network tool that can manage multiple connections and has a reconnect feature. With the default network manager I cannot even connect to more than one network simultaneously although I have two network devices of course.
And I guess I can run all that in console mode, right?