I am trying to wade through the semanage jungle to get permissions for a tftp client. I followed the HowTos [URL] but I get the following at the client:
tftp> status Connected to 192.168.1.101. Mode: netascii Verbose: off Tracing: off Rexmt-interval: 5 seconds, Max-timeout: 25 seconds tftp> get hello.o4 tftp: hello.o4: Permission denied
I finally figured out that the firewall directives shown at the end of the HowTo refer to semanage although the options are stated incorrectly according to the man page for semanage. I did insure that the file hello.o4 in /tftpboot has read permission for everybody.
I've got that vsftpd running on a ubuntu 9.10 machine. Although I cannot upload any file, I always get a "550: Permission denied"-error.
Code: # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. #
I've only recently encountered this problem with vsftpd when I was creating new ftp accounts. I keep on getting:
550 Access Denied.
on every action I try to do on ftp, no matter what. I've been trying to solve this myself however my attempts have been futile.
The permissions, and ownership have been checked and rechecked tens of times now, so thats not the issue. I've reinstalled the OS of my server twice now, and the problem is still persisting. Heres my config file, this isnt for anon by the way.
Code: # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. #
I am working currently on my server on an issue, I configured the SSH Deamon that only people who have a valid ssh-key can login on to the server, and kicked the password option. Now I've added a user account git. I navigate to his home folder created the folder ".ssh" and created in that folder the file "authorized_keys" I copied my public key in there. Now on my local machine I added that identity (via ssh-add) and I wanted to connect to my server. but when I'm trying to login myself I can't the only message I get is "Permission denied (publickey)."
I'm trying to setup a network boot server and I'm having an issue with tftp. In the /etc/xinetd.d/tftp file, I added the "-v" (verbose) option to the server arg line so that i could figure out what was happening. When i looked at the /var/log/messages log file, it let me know that permission was denied to /tftpboot/nbi_img.
So, in short, my problem is that tftp isn't working because it doesn't have permission to /tftpboot/nbi_img. I can't figure out why. I stumbled upon a site where the user figured out a temporary fix to this issue and what he did was disabled the xinetd service and typed the following command:/usr/sbin/in.tftpd -l -v -v -s /tftpboot/nbi_imgWhen I do this as well, it works! but only until I restart and then I have to do that again. Is there a way to be able to fix that for good?
And I added umask 022 to the user login script problem I have: I login with user and password that exists as a local user on my suse machine. I can read and download from my homedirectory, but I cannot upload with filezilla. Then I get the error: 550 permission denied critical file transfer error
I am attempting to connect to VSFTPD via Filezilla from a windows machine, but regardless of which user name I use I get a "530 Login incorrect" error. I have tried turning off the firewalls on both the CentOS and Windows side of things with no result. I disabled the SSL/TLS commands in the config file, also with no change. I tried a couple of different FTP clients, but got similar results regardless of which client I used. I have been going over man pages and documentation for a couple of days now, but cannot come up with an answer. I suspect it lies in my configuration, but I got the same results when I reverted my config file back to the original. what else I can do? One other note is that I am attempting to connect via a LAN, at this point I don't care if it works across the WAN as I only intend to use it to upload files to my web server.
I've setup vsftpd correctly and it's running fine with local users (in the same LAN). However, when remote users wanna login to the server, it takes more than 1 minute to get in. Users do can login from remote. It just took too long. (It prompted for the username and password very fast.) Since the server is behind a router, I did configure the port forwarding for TCP 20-21. The centos version is 5.3. The vsftpd is v2.0.5.
Has anyone seen this? I have attached a screenshot of it to this post.
When I log in using PUTTY, as soon as I enter my username and hit enter I get Access denied, then a prompt for a password and all works well, it just tells me access denied even though it didnt deny me. its weird.
when i logging with root then i saw message "permission denied" Then i changed root shell directory "usermod -s .usr/ root" but it says "permission denied" again. what is the default shell directory, or what can i do for change permissions.
I have two computers. One runs unRaid NAS software which is built on Linux. The other is running XBMC media center which is built on Ubuntu. XBMC has a local folder (/home/kevin/.xbmc/userdata/Thumbnails/) that it stores thumbnails in. I am essentially trying to move this folder to my server, but XBMC needs to see it as local. I started by deleting the old Thumbnails folder and it's contents. I then created an empty Thumbnails folder on XBMC and I also created one on my unRaid comp (192.168.1.20/disk7/xbmc_thumbs/Thumbnails). On the XBMC comp I run:
Code: chmod 777 Thumbnails mount -t cifs //192.168.1.20/disk7/xbmc_thumbs/Thumbnails Thumbnails
It creates the mount and as long as I'm logged in as root, I can copy files to the XBMC Thumbnails folder and they appear on my unRaid server's Thumbnails folder. The problem is that if I log in as kevin (the user that XBMC runs as) I get permission denied errors. I've tried changing ownership of the XBMC Thumbnails folder to kevin via:
Code: chown -v kevin Thumbnails
And it says it changed it, but if I check, the ownership and group both still show as root. I'm thinking that may be because now that the mount is made, it's showing the ownership of the Thumbnails folder on the unRaid server? Whatever it's doing I can't seem to change it and XBMC can't write it's thumbnails because of this.
I'm trying to run a backup using CPIO to an LTO2 tape in an HP Ultrium 460 drive using the following:find / -path /proc -prune -o -print | cpio -o -H crc --block-size=128 > /dev/st0Each time I get the error:-bash: /dev/st0: Permission deniedThis is regardless of whether I sudo the two sides of the command or not. I have used dd if=/dev/st0 of=/tmp/test.file ibs=128k count=1 to verify the blocksize (and since I was a little confused about block-size in cpio I also tried --block-size=256)
i have a big question about nfsv4, 2 mahine , 1 client 1 serverclient mount -t nfs4 nfs:/ /mnt/nfscd /mnt/nfs/1touch: cannot touch `123': Permission deniedmount -lnfs:/ on /mnt/nfs type nfs4rw,addr=192.168.1.5)this is my configclient & servervi /etc/hosts192.168.1.5 nfs nfs.test.com192.168.1.6 node1 node1.test.com
I have my DNS configure in 2 zones. 1 internal, and the other external. DNS is chrooted under /var/named/chroot amd has been operating without any problems for well over 2 years now. I have recently run cross the problem shown in the subject line. When I try to freeze the internal dehnert.com zone with the following command...rndc freeze dehnert.com IN internal
I get the error...
I have been running the command as root, and with iptables turned off, so there is no firewall to restricting access. (the system sits behind a firewall) I have been searching the forums all over, but I havent run across what might be causing me to have root denied access. If anyone has seen any problem like this, please point me in the right direction so I can iron this out.
I want to install Codendi softwr to my Centos 5.3.But can not execute the installation script gives an error permission denied./etc/fstab file does not contain a path that holds my CDROM drive.
I have 3rd party software that I need to install. It is called VNMRJ. It is packed as one .tar. I extracted the .tar to the desktop (under root) and want to start the installation. However, during the installation process, all .tar files included the the package (sub directories) can't be extracted by the installation routine. For every .tar I get the error
tar: /root/Desktop/vnmrj21b_inova_01106/code/common/com.tar: Cannot open: Permission denied Installation of VNMR failed tar: Error is not recoverable: exiting now DONE: 112 KB
I have a user (let's call him John) who is not able to list contents of several 777 directories even though it appears he has permission to.
Case in point, as root:
Code:
Code:
If I use ls -a or strictly ls as john, I can list the contents of the nss directory:
Code:
That says to me that I have an issue listing permissions. Fine, I don't really need john to be able to list permissions. I want him to have rwx access to /media/nss/ENG which as you can see from my listing as root shouldn't be a problem since the perms on that dir are 777.
I am able to CD into the ENG directory or any other directory or subdirectory in /media/nss that has equivalent 777 perms, but once in the directories I can't list the contents:
Code:
I can get anywhere and do anything I want under the media/nss folder as john, except listing files. I even tried using an ACL i.e.
I am trying to give an SSH user on my server permission to compile C exploit with gcc, and I have had no luck. Every time i try to run gcc i get: "sh: /usr/bin/gcc: Permission denied. Has anyone else had this problem with this ?
I have a cgi script that tries to get the IP address of a domain. the Domain is defined in Bind, yet it can not resolve it. I put the domain in the host file and it then gives a Error: unable to create socket - Permission denied
I figure I have to do some code changes to the script but here I would like an explaination as to the error I am getting.
I have tried to mount Sda on my laptop HP dv6 and I have got this problem [root@cpe-74-71-125-175 ~]# /dev/sda1 /mymount/win ntfs-3g rw,umask=0000,defaults 0 0 bash: /dev/sda1: Permission denied
when I try to su, with the right password I know it is because I have reset it with a sudo, it says su: incorrect password. Looking at /var/log/messages I see su: Unable to open admin password file: Permission denied. This must mean that the file has incorrect permissions and or owner/group. I am wondering if anyone knew where the file was located and the correct permissions/owner/group.
I am getting permission denied after su - <username>. I have checked the permission and did not get any error.
[root@NF-Provider-SOC /]# su - nfadmin -bash-3.00$ cat /var/log/messages cat: /var/log/messages: Permission denied -bash-3.00$ pwd /home/nfadmin -bash-3.00$ which bash /bin/bash -bash-3.00$ crontab -l cron/nfadmin: Permission denied -bash-3.00$ id uid=501(nfadmin) gid=503(nfadmin) groups=502(dba),503(nfadmin) -bash-3.00$ tailf /var/log/messages Cannot open "/var/log/messages" for read Permission denied and permission in home dir is 755.
I installed proftpd on a new CentOS 5 server, yet when FTPing in (I can log in fine), the files and directories do not list and I get a "550 filename: Permission denied" error each time I try to "put" or "get" a file (I can tell that the file is there, though, because if I try to access a non-existent file, I get a "No such file or directory error" instead of the permission denied error).
