I am using squid to controlling access to the internet all is working fine expect one of the user who is using outside organization portal to connect internet. But whenever he tries to enter in the portal by typing (EXAMPLE)url. Permission denied error from squid occur.
How can i allow this portal in squid. So squid will allow this to access.
I am using Squid Server from last 5years. There is a site "http://www.firstflight.net", which was accessible before few days but now I am unable to access this site. If I use IE8 then getting below error:
"Internet Explorer cannot display the webpage"
Or using Google chrome getting error:
"This webpage is not available The webpage at http://www.firstflight.net/ might be temporarily down or it may have moved permanently to a new web address. Error 330 (net::ERR_CONTENT_DECODING_FAILED): Unknown error."
But other sites are working fine..
I'm using squid for proxy server in FC6. I'm also using squidGuard for web-site access restriction. I want to do some exception now for website access. For example, squid user1 with ip 192.168.7.10/32 shoud not access facebook.com while all other squid users with ip 192.168.7.11/32, 192.168.7.9/32 and so on... can access facebook.com since facebook.com is not listed in squidGuard .db files
View 1 Replies View RelatedMy squid server works fine in fedora 11 system . Is there any web like interface for admins to create,change,modify users of squid and to view their logs.
View 1 Replies View RelatedI would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedI am facing problem to access my network PC's and even ping. My network scenario is as follows. I am using squid 2.6 stable 21 on RHEL5. all other PC's on network (OS is Windows XP Professional SP2) are connected to internet through squid, authentication is ON on squid. All PC's on network (Win XP Systems)are assigned IP statically and Default Gateway is set which is Squid's IP. I want to access these PC's (Win XP Systems) mean share data between them. The problem is that i am unable to access and even ping these PC's.
View 2 Replies View RelatedI am using internet web control through squid... All is working fine only some little bit issues.
(1) Sometime when i tried to open google.com or any site I got message (The requested URL could not be retrieved) Screen Shot Attached.) but again after sometimes same websites will open.
url
(2) I would like to block word 'sex'.. So I have edit squid.conf with the following acl
acl Blockword url_regex sex
http_access deny Blockword
but problem occur in some websites where 'sensex' word found in url. Then squid block 'sensex' url content website also..
I have configured my squid that have a limited access to websites but still some website were accessable vis https so I removed transparent from squid. Now what changes do I have to make in iptbles
View 1 Replies View RelatedI'm trying the tail -f 172.16.X.XX /var/log/squid/access.log to view the sites requested by the client ip 172.16.X.XX but the result is it still open all the ip's requesting for the internet access. is there any tail commands that can monitor only the specific IP address requesting for internet access.
View 2 Replies View RelatedHow to give full access for the particular ipaddess in squid. and how to give particular website access to the particular ipaddress.
View 4 Replies View RelatedI'm fairly new to Linux and very new to Squid and am having authentication issues! I am using Oracle Enterprise Linux (which is basically Red Hat without the branding) and wanting to use Squid Proxy Server for web access with authentication to Active Directory. I've found a number of articles about this online and all of them say to use auth program squid_ldap_conf which should be in /usr/lib/squid/. I don't have a squid directory in /usr/lib for starters and my squid binaries are in /etc/squid but there is no squid_ldap_conf in there either. I have installed the latest version of Squid (3.0) to see if that helped but I still cannot find the authorisation program.
View 3 Replies View RelatedI've set up Ubuntu 9.04 (desktop) at home in a lab environment (workgroup rather than domain) and have configured Squid. Everything works fine but, when I took it to the next level and made the proxy transparent, my problems began. I can still access sites (having pointed the XP Pro client to the squid box as the DG) and the sites are logged in /var/log/squid/access.log but I am unable to use Outlook to access my SMTP and POP3. I guess that the setup is blocking ports 25 and 110 and I'll need to configure iptables to forward packets destined for these ports directly to the "real" DG, rather than the Squid box. Here's the set up:
A single NIC (eth0) on 172.19.0.250 / 16 (static) ADSL router ("real" DG) on 172.19.0.1 I executed iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT --to-port 3128 My squid.conf:
Code:
acl all src all
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8
acl localnet src 10.0.0.0/8# RFC1918 possible internal network
acl localnet src 172.16.0.0/12# RFC1918 possible internal network
acl mynet src 172.19.0.0/16
[Code]....
I have an old FC2 box running Squid version 2.5. It has been running since 2003 so I am in the process of replacing it. I have a new machine with FC11, iptables, and Squid 3.0 installed.
On the old machine I use iptables to intercept Port 80 traffic and send it to Squid. By default I block all internet access and allow only sites that are in an Allowed_Sites.txt file. Within Squid I also have statements to allow certain users to bypass Squid based on their IP address.
I have set up the same thing on the new box. I have iptables intercepting the Port 80 traffic and sending it to Squid. That is working because if I remove the redirect statement from iptables all internet access is blocked.
The problem I am having is that Squid is not blocking any websites. It acts like the ACL is set to http_access allow all. I have worked on this for several hours and am stumped.
These are my Squid rules:
acl allowed_sites url_regex "/etc/squid/Allowed_Sites.txt"
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32
acl SSL_ports port 443
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access allow Bypass_Users
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
acl our_networks src 192.168.1.0/24
http_access allow allowed_sites
http_access allow our_networks
http_access deny all
icp_access deny all
htcp_access deny all
http_port 192.168.1.254:3128 transparent
hierarchy_stoplist cgi-bin ?
access_log /var/log/squid/access.log squid
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|?) 0 0% 0
refresh_pattern . 0 20% 4320
visible_hostname FC11.proxybox
icp_port 3130
coredump_dir /var/spool/squid
I am importing my project to another machine on my LAN to the directory:
/srv/svn/repos/my-repo
where my-repo was created via svnadmin create option
The permissions of /srv/svn/repos/my-repo are
drwxr-xr-x 6 svn svn 4096 2010-04-19
17:30 my-repo
I executed following command to import myProject files to my-repo on remote system
sudo svn import -m "First import" myProject svn+ssh://baltusaj@192.2.12.133/srv/svn/repos/my-repo
This command started 'Adding' files but gave following error after 'Adding' 7 files
svn: Can't open file '/srv/svn/repos/baltoros-valgrind/db/txn-current-lock': Permission denied
I am wondering why running this file:
Code:
-rwxrwxrwx 1 root root 1247 2010-04-21 18:25 autorun.sh
by issueing this command:
Code:
./autorun.sh
results in this message:
Code:
-bash: ./autorun.sh: Permission denied
I'm logged in as root and prior to the above I did a chown root:root on the file.
I have two computers. One runs unRaid NAS software which is built on Linux. The other is running XBMC media center which is built on Ubuntu. XBMC has a local folder (/home/kevin/.xbmc/userdata/Thumbnails/) that it stores thumbnails in. I am essentially trying to move this folder to my server, but XBMC needs to see it as local. I started by deleting the old Thumbnails folder and it's contents. I then created an empty Thumbnails folder on XBMC and I also created one on my unRaid comp (192.168.1.20/disk7/xbmc_thumbs/Thumbnails). On the XBMC comp I run:
Code:
chmod 777 Thumbnails
mount -t cifs //192.168.1.20/disk7/xbmc_thumbs/Thumbnails Thumbnails
It creates the mount and as long as I'm logged in as root, I can copy files to the XBMC Thumbnails folder and they appear on my unRaid server's Thumbnails folder. The problem is that if I log in as kevin (the user that XBMC runs as) I get permission denied errors. I've tried changing ownership of the XBMC Thumbnails folder to kevin via:
Code:
chown -v kevin Thumbnails
And it says it changed it, but if I check, the ownership and group both still show as root. I'm thinking that may be because now that the mount is made, it's showing the ownership of the Thumbnails folder on the unRaid server? Whatever it's doing I can't seem to change it and XBMC can't write it's thumbnails because of this.
i m using squid for internet sharing, i am facing problem while accessing public ftp, therer is no problem in accessing local ftp, but if try to access public ftp like ftp://125.125.20.2 i am getting error
' An FTP authentication failure occurred while trying to retrieve the URL: ftp://125.125.20.3/
Squid sent the following FTP command:
PASS <yourpassword>and then received this reply User anonymous cannot log in.Your cache administrator is root.'
if i try to access local ftp ' ftp://10.185.200.12' getting no error
I have installed the squid server on my centos system. I want to access the squid on GUI mode.
View 3 Replies View RelatedQuite a few times i have boot puppy linux live and have tried to copy file from the underlying NTFS windows HD only to get an error like permission denied when i try and copy a file to say a USB stick, i think some files copy but i seem to get permission errors with some files.
View 1 Replies View RelatedI have created a new file system (fuse) which works fine and is mounted in the local host. I want to be able to mount it from another host. I added it to /ect/exports: /mnt/ltfs *(rw,sync) And restarted nfs. Then from my client host I type:
mount -t nfs myHostName:/mnt/ltfs /mnt/data1
Where /mnt/ltfs is on my local host and /mnt/data1 is on the client host. Note that this is a "FUSE" file system so here is it's local "mount" output: ltfs on /mnt/ltfs type fuse (rw,nosuid,nodev,default_permissions,allow_other) Note thet this is of type "ltfs" but I am told that it should work like its a nfs. ltfs uses fuse under the covers.
i am monitoring access log messages in squid proxy server,can it possible to get date,time,day in access logs is it possible
View 2 Replies View Relatedi just implemented ur instruction n got success but i have one problem that i want to provide only two or three web sites access to groups in squid.
View 1 Replies View RelatedIs there any way to delete squid proxy access logs. e how can the access logs be deleted
View 6 Replies View Relatedi have been studying linux for 3 month ,so i have solved some problems related with server part.The problem i have is the squid access.Can I allow some IP's to download files on squid.I mean i already give access to download by reply_body tag,andwant to give permission only one specific IP for unlimit access to download.Is there any solution
View 3 Replies View RelatedCentos 5.4 distro using on remote machine. I have remote site where internet access given via squid proxy. So when we enter in browser it start working internet fine. But on command line (bash shell prompt terminal) like wget, ping, nslookup, traceroute etc., these commands does not work.
View 6 Replies View RelatedI've a SQUID proxy server installed in SUSE 9.0 ES server. I've created cache dirs on seperate partitions for better caching. Its working fine. But since last 15-20 days, i've experienced very slow net access to clients. I've gone through the /var/log/messeges file, it generates a two line error messeges
client read request fd602 invalid request
parse http request: unsupported method;HET
This messege increases as the number of clients increates (for internet access). The apperance of error messege lowering down as soon as the number of clients reduces.
As the count of clients increases error messeges increases, internet access getting slower and slower.
My company is using Squid Proxy 2.6 for internet connection. Recently we implement a Webmail system. This is the link [URL] can access it using computer directly connect to internet but those using Squid Proxy are unable to Login although the login screen appear. Is this cause by the squid.conf setting or something else?
View 1 Replies View RelatedI need to analyze the squid access log file for the purpose of my research.For that I need to obtain some correlation among time and the web site visited, machine ip and the web site name etc.It's better if I can draw a graph by analyzing the log file . I found some log analyzers but it didnt provide this.I need to obtain some cor-relation from this log file .
View 1 Replies View RelatedI'm trying to recreate a simple script I wrote to parse out the access.log to get a rough idea of websites that users are going to on our corp network. The issue I'm having is I want to pull out any line from access.log that ends in .com/ .org/ .net/ or whatever to only see what the user entered into the address bar and drop pictures, js's and everything else and log only this. so what I do is :awk '{print $8} | grep -e '[cong]|[ore]|[mgtv][/]'$ and nothing happens.I know there is an easier way to do this with awk alone,
View 8 Replies View RelatedI am trying to install Python module on my machine. While installing, there is an error on terminal.It was OK until this step:
Writing
/usr/local/lib/python3.2/dist-packages/athletelist-1.0.0.egg-info
Then it shows an error:
error: /usr/local/lib/python3.2/dist-packages/athletelist-1.0.0.egg-info: Permission denied
m?PS. I use Ubuntu 11.04 and I am quiet new on Linux World.
