General :: How To Connect To OpenVPN With NetworkManager
Mar 7, 2011
I have installed an OpenVPN server on my OpenWrt 10.03 router [freshly flashed]:
[URL]
It seems "ok".
I connect my pc to the lan port of the router, and i want to try it out. I'm using Fedora 14 with GNOME. In the NetworkManager applet i set these things: this and this. Ok!. i try to connect, but it fails. Here are the logs: [URL]
one important thing: my routers [the one with the openvpn server] ip address is 192.168.1.2, and i didn't had to write it nowhere. so how could the networkmanager applet know the ip address of my openvpn server? i think this is the problem, but i just can't find where to write 192.168.1.2
p.s.: yes, i tried to google for: "No server certificate verification method has been enabled." but i didn't find a thing, and i'm trying for hours now... :
p.s.: if i [on the router]:
iptables -P INPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -P OUTPUT ACCEPT
[Code]....
View 1 Replies
ADVERTISEMENT
Jul 27, 2010
i have added a vpn connection on my Lucid desktop machine, but every time i try and connect, it fails. I also have the same, identical vpn connection on my karmic install on my laptop. everything works perfectly on Karmic, but Lucid is having problems. I have followed identical steps for creating the vpn connection on both machines: vpn connections can be made in 2 ways, the first is through the network manager, but trying to connect through the nm-applet returns an error about vpn failing to connect and "no valid vpn secrets".
I suspect this is at the root of the problem. The only way for my Lucid machine to successfully connect through the command line is if I run the openvpn command under sudo.
View 2 Replies
View Related
Mar 13, 2011
I'm getting a timeout error from NetworkManager when attempting to connect to my router/firewall.
Excerpt from /var/log/messages attached.
View 1 Replies
View Related
Jul 5, 2011
I have a Fedora 14 machine, and I have an OpenVPN CentOS 5.5 server installed and running without issues.I've setup the Fedora machine to connect as a client to the server, and all goes pretty well using NetworkManager.What I'm not able to do is getting NetworkManager to autoconnect to the server upon user login. I have the "Auto Connect" marked, but nothing happens at boot/login.
View 4 Replies
View Related
Jan 16, 2011
I got it set up in the NetworkManager applet (imported the client.ovpn), but when I connect it sends ALL my traffic through the VPN. I would prefer all accesses to the internet go over my normal default gateway, rather then all the way through to the VPN's default gateway.When I connect through the command line:
Code:
openvpn --config client.ovpn
I don't have this problem, and accesses to the internet still go over my default gateway on
[code]...
View 1 Replies
View Related
Nov 19, 2010
I installed all the necessary packages for the networkmanager-openvpn function to function. The openvpn-connection-setting are successfully imported into the networkmanger via the conf file but the apply button is grayed out, so that actually saving and using the connection isn't possible? Does anyone know, where the problem is? It's a fresh install of Ubuntu 10.10 after the upgrade from 10.04 sent the networkmanger down the drain.
View 2 Replies
View Related
Dec 1, 2009
I have Fedora 11 x86_64 installed in my pc.this morning i accidentally pressed "remove the network manager icon" from the main panel and now i cannot find ANY way to put it back.in the services the network manager is working.when i plug the ethernet cable i have access thankfully since it was set to automatic before but i cannot select any wireless networks.all my devices eth0 and wlan0 are controlled by the network manager.i tried to uninstall it and install it back through yum (i know it is what a windows user would do) and nothing still.
View 14 Replies
View Related
May 16, 2010
I an unable to connect to an openvpn connection in ubuntu karmic. I have installed openvpn , I added the user certificate, CA certificate , Private key and the conf file in the /etc/openvpn directory. Also followed the steps given here [URL]..community/OpenSSL under "Importing a Certificate into the System-Wide Certificate Authority Database" , but still when I try openvpn --config linux_client.conf I get the following error.
Mon May 10 21:58:57 2010 /usr/bin/openssl-vulnkey -q -b 2048 -m <modulus omitted>
Mon May 10 21:58:57 2010 LZO compression initialized
Mon May 10 21:58:57 2010 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Mon May 10 21:58:57 2010 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Mon May 10 21:58:57 2010 Local Options hash (VER=V4): '41690919'
[Code]...
View 5 Replies
View Related
Jun 4, 2011
As I reported in this bug:[URL].. root is not able to start an openvpn-connection via the "nmcli"-command to control NetworkManager, whereas my user does not run in any problems with this command. My error output when starting as root is as follows:
Code:
# nmcli con up id "my-openvpn"
Active connection state: unknown
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/5
state: VPN connecting (need authentication) (2)
Error: Connection activation failed: no valid VPN secrets.
Does anybody know what to do about this strange behaviour? The vpn-secret seems to be stored in the gnome-keyring and in the /etc/NetworkManager/system-connections/my-openvpn simultaneously. But root cannot access any of these. Why this is important? I'm trying to set up a dispatcher-script to automatically start openvpn on eth-connection. but this does throw the exact error from above (no valid vpn secrets..).
[Code]...
View 1 Replies
View Related
Jan 9, 2010
I am experiencing troubles when connecting to my new private network under Linux (works fine with Windows). I cannot get an ip address and the logs tell me a bit more, but I would like to know how to proceed to resolve this issue. My network adapter is an Intel Wifi Link 5100 using the iwlagn driver. Connecting to other WEP APs usually works flawless, it's the first time my system won't connect at all to this particular WEP encrypted access point.
Logs: NetworkManager: pastebin - collaborative debugging tool
wpa_supplicant: pastebin - collaborative debugging tool
View 8 Replies
View Related
Mar 12, 2011
I've just upgraded my netbook from Jumping Jalopy, was it? to Karmic Karla 9.10 and I was obviously remiss in not taking note of the various sub-programs, libraries etc, that it was deleting. Now NetworkManager doesn't connect to my wi-fi whereas before it picked up immediately and was as solid as a rock thereafter. This version is apparently 0.7.996 although I cannot see this number on the Synaptic list. My wife's laptop is ok so the problem is on the netbook; I've checked "Edit Connections" and they're both the same.
So presumably the upgrade has removed something NetworkManager needed, but what? I've looked down Synaptic but there's just too much stuff there that I don't understand, likewise an attempt to trawl back through past threads on here. I'm barely computer literate, all assistance very gratefully received! How do I find out what dependencies it's lacking?
View 4 Replies
View Related
Dec 9, 2009
I'm using CentOS 5.4. I want to set-up a PPTP connection (I'm the client). I installed the NM pptp plugin from EPEL's repository. I have configured my PPTP connection in the NetworkManager applet but now I don't know how to connect to the server, I mean, there's nothing like 'Connect now'.
View 1 Replies
View Related
Oct 20, 2015
I try to establish basic connection between my 2 end systems using openvpn. The problem is when i move the client files to my laptop i cant even ping the server from there. I copy paste the server commands in section 4 [URL] ....
In the client i ran the first command and changing VPNSERVER IP with 10.9.8.1 and LOCALGATEWAY IP with 192.168.1.1
which i thought that whats the server use : ROUTE_GATEWAY 192.168.1.1/255.255.255.0 in the server initialization process
The second command produce error device tun0 not found and when i create one using openvpn --mktun --dev tun
I get RTNETLINK answers : network is unreachable
Note : I use wireless connection in the client system (laptop). The server works good and i could ping him ( from the same machine ) but cant ping him or access the vpn server in my laptop. I also use default openvpn settings...
View 3 Replies
View Related
Jun 12, 2011
I installed fedora15, My openvpn didn't connect to my working computer.I checked openvpn configure more time, but still don't connect,
View 11 Replies
View Related
Mar 2, 2010
i recently rent a VPS and installed with CENTOS 5 64bit, i followed a tutorial to install openVPN to bridge traffic to my windows machine.
View 3 Replies
View Related
Feb 3, 2009
I loaded F10 up on my laptop a few nights back. NetworkManager connects via Ethernet just fine. It will also connect wirelessly, but only when security is disabled. I've been using 128-bit WEP.
When I try to connect using security, this is what appears in the log:
Code:
Jan 29 21:07:17 localhost NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 29 21:07:17 localhost NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
[Code]......
View 2 Replies
View Related
Mar 10, 2011
I have installed opensuse 11.3 I am unable to connect to my wireless connection.
KNetworkManager finds the connection (when i scan for connections), i can enter the WEP Hex key, it says it is configured. Goes through its "check list" when you click "ok", and all seems good. But it won't connect. When i run "nm-tool" i get:
State: unknown
WARNING **: error: could not connect to NetworkManager
I edited values in:
linux-2ys8:/home/sam # vi /var/lib/NetworkManager/NetworkManager.state
to "true"
running rcnetwork restart, output was:
Shutting down network interfaces:
eth0 device: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
eth0
[code]....
knetworkmanager(9276): KUniqueApplication: Cannot find the D-Bus session server: "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
knetworkmanager(9275): KUniqueApplication: Pipe closed unexpectedly.
View 9 Replies
View Related
Oct 14, 2010
just did a clean install and update to Maverick, and found that empathy won't connect without internet connection managed by networkmanager (I'm using wvdial to connect to the internet since networkmanager doesn't recognize my modem). it keeps saying 'Offline -- No Network Connection' unless I deactivate and reactivate the account. It's kinda annoying.
for Lucid, there is a simple fix for this condition, [URL]... but now, there is no entry for empathy in gconf-editor after I did the Maverick fresh install.
is there anybody have the same problem and know the solution? I can just install pidgin, but I think it is better to not having redundant apps installed.
View 1 Replies
View Related
Jan 18, 2011
I've simple PPTP connection in NetworkManager that is build in with ubuntu, once I disconnect the connection [to change IP or so] the connection won't establish again...
I'm getting a libnotify popup that says "Connection failed because timeout"
I'm getting a good IP, I just can't connect again after 1 disconnect...
Any idea why?
View 1 Replies
View Related
Jan 1, 2011
Running CentOS 5.5. NetworkManager is able to connect to wifi after logging in as root in the GUI and entering password to unlock keyring. What do I need the change to get NetworkManager to connect the wifi at bootup?
View 2 Replies
View Related
Apr 26, 2010
We use Openvpn for remote access to the office network. It would be nice to keep this running and automatically connect to the office at all times.Once started, it does this anyway. The problem lies when the user comes into the office. Openvpn connects as usual to the vpn gateway, but this causes weird routing loops.Is there a way to say to Openvpn "Always connect to the gateway unless you are on network 10.10.10.0/24" ?
View 2 Replies
View Related
May 8, 2011
I ran the Kvpnc wizard and imported my config file and when I try to connect it always says connection timed out.I can connect to OpenVPN without a problem using the terminal, all I can say is kvpnc is a real pain and I don't get why I can't connect with it if I can connect without a problem from the terminal.I thought this was suppose to be a simple GUI that you just imported your config add in your cert and the cert path and that's all.
View 1 Replies
View Related
Apr 14, 2010
I have a network that consists of a few desktop machines, laptops, and two Internet connected linux servers. The Linux servers are the gateways, routers, and firewalls for my desktop and laptop machines.Whenever I'm away from home; I can connect to my home machines over the Internet by first ssh'ng (technically I use Webmin; because my firewall on each Linux servers blocks ssh from the Internet.) to one of the linux servers and then ssh'ng to the desired machine on my home network.
This works fine for my home linux machines. But not my Windows machines.I'd like to be able to rdp or rdesktop to my Windows machines.Will OpenVPN allow me to accomplish this ?
View 14 Replies
View Related
Jan 15, 2010
I installed a new 11.2 and now my huawei e1692 works (thanks to huawei e1692 don't work -
openSUSE Forums).
kde=Versione 4.3.4 (KDE 4.3.4) "release 2"
kernel=2.6.31.5-0.1-desktop
[code]...
View 4 Replies
View Related
Feb 7, 2010
I'm running ubuntu 9.10 with the latest networkmanager (from ppa)I thought this could be wrong credentials setting, so i've tried a huge amount of setups (user: phonenumber, password: phonenumber, avp:telenor, seems to be the general consensus for how it should be)Is there something I'm missing or is there any way I could tail the output as NetworkManager tries to connect (hopefully seeing something like "wrong password" etc.)
View 6 Replies
View Related
Dec 24, 2009
After some wonderful days with fedora with my CDMA mobile internet connection (the only connection where I live) NetworkManager can't connect anymore.
I tried to delete the settings and rewrite them without success.
I have A Novatel Ovation U720 CDMA/EDVO USB modem.
I can connect with wnXP and kubuntu, but can't connect with fedora anymore.
I wish to make the definitive move from kubuntu to fedora... but I should wait.
View 2 Replies
View Related
Jun 23, 2010
have to connect to it manually every time i log in where i'll get prompted for the root password to connect.
things worked fine on F12.
View 3 Replies
View Related
Oct 15, 2010
I have a ZTE 3G USB modem (MF645).
When I plug it, 5 devices appear: /dev/ttyUSB[0-4]. The modem device is /dev/ttyUSB2, and I can successfully connect wvdial on it.
NetworkManager detects the modem, however, it tries to connect to /dev/ttyUSB1 instead, and fails.
How does NM decides which device to connect to?
Is it possible to instruct it to connect to a specific device?
View 1 Replies
View Related
Feb 15, 2010
I'm trying to connect OpenVPN server using shell command.
I've installed all needed packages (I guess)
if type
Code:
sudo openvpn client.ovpn
and i've got messages:
Code:
Mon Feb 15 12:29:25 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
[Code]....
but i can't see tap0 interface and cannot ping any address at remote location.
I tried this config file at Windows OpenVPN client and all works fine.
View 2 Replies
View Related
Sep 7, 2010
I have setup an OpenVPN server on Ubuntu server. I am able to connect with Windows clients. I am, however, unable to correctly connect using Ubuntu.
If the router firewall is blocking the pings to keep the connection alive, then the connection initially does not work, but will work after the first timeout and reconnect. If the firewall does not block the pings then the initial connection attempt never times and therefore the connection does not work.
Attached is the readout from the client.
The first attempt gives error ERROR: Linux route add command failed: external program exited with error status: 7
Successive attempts work, they just time out every two minutes.
View 1 Replies
View Related
