Fedora X86/64bit :: Programs That Work In FC10 And FC12 Develop In FC11
Apr 7, 2010
I have programs that work in FC10 and FC12, but when I run them on FC11, i get behaviour that is very similar to a deadlock. They don't crash or anything. It just seems that all program output stops at one point and never resumes. I am wondering if FC11 has any known threading issues that one may need to know about before trying to use it to run their software from FC10 or FC12. Maybe something in the way that threading is handled differently from FC10 or FC12 that is not necessarily a problem, but just needs to be kept in mind when writing code for FC11.
View 10 Replies
ADVERTISEMENT
Oct 12, 2009
I recently update FC10 to FC11 and Yum has stopped working. Also, "Add/Remove Software" has no packages listed. And, I have no Software repositories listed. When I try to run Yum I get the following:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
[Code]...
View 1 Replies
View Related
Jun 9, 2009
I'd like to try a clean install instead of an upgrade from FC10 to FC11. What is a good way of getting the list of all packages that were installed through yum, and how do I feed that list to yum on a newly installed FC11?
View 7 Replies
View Related
Jun 15, 2009
Once of the biggest issues I had with FC10's KDE desktop was its taskbar widget and how it worked. It did not group tasks, didn't stack vertically, etc. etc. I understand this was due to KDE 4.1 which was a or is considered a "broken" KDE release? I've read that many ppl say KDE 4.2 is much better in FC11. Many FC11 reviewers state they like its KDE version better than 4.1 shipped with FC10.
However, has the KDE taskbar widget specifically been replaced or upgraded? Anyway, I'm considering an upgrade, and I'm willing to do it JUST to get another taskbar in KDE... if the 4.2 one is an improvement. Fondest wish is for it to be exactly like the KDE 3.5 taskbar widget from FC6!
View 2 Replies
View Related
Jun 22, 2009
I've been running FC10 with all updates and had downloaded the FC11 DVD. Yesterday I upgraded to FC 11 using the DVD and it appeared that everything went fine. However when I tried to do ayum updateI got the following error. There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
No module named yum
install a package which provides this module, or verify that the module is installed correctly.
It's possible that the above module doesn't match the current version of Python, which is:
2.6 (r26:66714, Mar 17 2009, 11:44:14)
[GCC 4.4.0 20090313 (Red Hat 4.4.0-0.26)]
go to the yum faq at: [URL] I'm not sure what to do next. I also noticed that all my previously configured repositories are lost.
View 3 Replies
View Related
Mar 16, 2009
Downloaded from here: [URL] then ,it is 32-bit and I need to know what all 32-bit libs are needed as dependency for skype to work. I am on Gnome Fedora and purposefully selected static version of skype to prevent installation of libqt4.
View 2 Replies
View Related
Jul 8, 2009
I'm having a problem getting BIND to start after doing the FC10->FC11 upgrade. Others have been reporting some bad symbolic links, but this isn't that problem. I've searched the forums here, but I don't see anything like this anywhere.
Here's what I see:
Code:
[root@atomu etc]# /etc/init.d/named start
Starting named: [FAILED]
So, no error message. Logs read as follows:
Code:
Jul 8 00:38:00 atomu named[2414]: starting BIND 9.6.1-RedHat-9.6.1-2.fc11 -u named
Jul 8 00:38:00 atomu named[2414]: built with '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc'
[code]....
View 4 Replies
View Related
May 15, 2010
After trying to do a upgrade to fc11 from fc10 it seems i am stuck between them. the grub loader only shows 1 fc11 kernel, but when i try yum update all the updates are fc10, Some libs are so.8 and some are so.7 namely libssl.so.8 and the missing deps are libssl.so.7.
is there a way to revert back to fc10 or force install of fc11.
compaq evo n400c
no floppy no cdrom can get usb flash to work.
View 4 Replies
View Related
Jun 24, 2009
I upgraded from FC10 to FC11 yesterday.I had no problems using FC11 after I looked into the bootloader (not intuitive - Ha!).Tried to boot up this morning; and things seemed to work well until I tried to call up Firefox (added a few themes yesterday).The window pops open; but the computer freezes on the spot with an alarm (generic "beep", w/o the finishing "p").Tried it with Epiphany; and I get the same results with the exception of actually getting to the Home Page.Yum works for the most part - I reinstalled Firefox (no effect); but couldn't reinstall epiphany (keeps saying "there is no such package - did you mean 'epiphany'". No typos on my part - go figure). Doing Software/Package Updates (via System Menu) freezes the box as well.Did it with the system monitor on. It doesn't appear to be related to CPU Usage.
Had a FC10 liveUSB and used it for awhile (e.g. to check out the forums). After giving my ISP some grief about downloading speed, immediately received a note from their Abuse Department, saying that my machine had been infected with a virus and had been sending spam emails (post upgrade to FC11).
View 14 Replies
View Related
Aug 2, 2009
How can I force the upgrade FC10 -> FC11 with online download? Somewhere in Software Update settings?
View 2 Replies
View Related
Jan 23, 2010
After the Upgrade of my Fedora Insatallation (FC 10 => 12) I have some problems with Gnome and the Login via console. The system actually boots fine and all kind of services like Postfix, IMAP, Samba, SSHD, Apache, etc. are avialable normally.
If I try however to work directly on the server I only see the completed Fedora progress icon and not as hoped for, the Login to Gnome. Also the attempt to change to a plain console with ALT-CTRL-F1 fails.
Since actually everything seems to work quite fine, I am somewhat helpless, according to should I look for, to get Gnome and the Console Login working again.
View 8 Replies
View Related
Nov 23, 2009
Pulseaudio setup. My pulseaudio was working when I was using FC11 and it stops working after I upgrade to FC12 using preupgrade. The system sees audio device and alsa is working correctly. No audio at all (system audio and mplayer) from Pulseaudio. I am using the onboard Intel audio. The verify from the alsamixer that the volume is not muted. I also tries all the combination of profiles in the pavucontrol and in some of the profiles, I can see the output volume bar is moving, but still no sound
pulseaudio-0.9.19-2.fc12.x86_64
alsa-plugins-pulseaudio-1.0.21-2.fc12.x86_64
Attached is the pulseaudio log when playing video from mplayer.
View 14 Replies
View Related
Mar 4, 2010
What to do? After preupgrade and update fc11->fc12, system has a mixture (oh yeah) of fc11 packages and fc12 new ones. Dependencies problems, and even by removing, reinstalling packages sometimes it's picking up fc11 ones.I tried yum clean etc to no avail. Is there any script or anything to solve this automatically? I suppose the solution is to manually erase all the fc11 packages (assuming they are really installed and not simply reported as such)?
View 14 Replies
View Related
May 10, 2010
kpackagekit warned me about a distribution upgrade to FC12in order to set things in motion i have to press the upgrade button is this action completely safe?since my FC11 is working like a charm, and i consider to upgrade to FC13, depending on the fact if i can build kernel drivers for kernel 2.6.32-,, that is still in the testing repo'smy idea is to upgrade all available packages from testing when fc11 is EOL, and i will see what happends after this upgrade, if my system crashes or whats so ever, i will install FC13.
View 9 Replies
View Related
Jul 20, 2009
I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies
View Related
Nov 24, 2009
Was using preupgrade from FC11x64 to 12x64. Preupgrade caused alot of problems like /boot not enough diskspace. After some searching found the steps and preupgrade proceed happily but after reboot got kernel panic grrr.
Took 3 days to find another machine to download and burn the FC12x64 disk. So I booted via the FC12x64 disk and selected the 1st option to install/upgrade. I thought it is upgrade and so choose replace my existing linux system however it wiped out everything on the disk. I have some important data in my home directory. I think it is in LVM, not a partition like /dev/sda1. How can I recover them? Was using stock settings.
View 3 Replies
View Related
Nov 10, 2009
Today I got update notification. I type in terminal yum update, and get this error: Quote: Error: Missing Dependency: libnetfilter_conntrack.so.1()(64bit) is needed by package iptstate-2.2.1-5.fc11.x86_64 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest
I removed iptstate.x86_64, again run yum update, and than, ibnetfilter_conntrack got installed. I tried to install iptstate.x86_64 again, but i get Quote:
[Code]...
View 2 Replies
View Related
Oct 22, 2009
I assumed this had to be a FAQ, but after hours of searching, how to do this on FC11, but that didn't work with the yum on FC10. I don't need a huge list, but at least the basics (ld-linux.so, and I imagine the C++ compatibility libs).
View 2 Replies
View Related
Feb 19, 2009
I just tried to update to kernel 2.6.27.15-170.2.24.fc10 (x86_64) at the suggestion of the gnome update widget, and the process hung. A bunch of other things were updating at the same time, many of which were related to audacity or wine.
I'm not sure just what was being updated, because the option to review which updates are available does not work - when I click on it, nothing happens, but when I take the other choice (install all updates), I take pot luck. It would be nice to be able to choose which programs to update, and to be able to upgrade the kernel independently, but I don't seem to be able to do that at the moment.
View 14 Replies
View Related
Sep 28, 2009
I need to develop application for 32 bit environment.
Before to install FC11 64, I used FC 9 and FC 10 i386 version without any issues.
I'm lookking for a tutorial about use 32 bit development environment in a 64 bit OS.
How or where I can setup FC11 for this features.
View 2 Replies
View Related
Oct 29, 2009
I've just upgraded from FC10 to FC11 (x86_64). Before the upgrade Firefox worked fine (it used a fair amount of ram but I typically have loads of tabs open :P ) but since the upgrade running Firefox maxes out my cpu. The whole system runs unusably slow if I have Firefox running now. I switched from KDE to LXDE and just ran Firefox to see if I could free up enough memory to save some tabs as bookmarks and close them but it's impossible (and not a permanent solution anyway). Konqueror runs blisteringly fast but with a cpu monitor running I can see starting Firefox just maxes out the cpu and it stays there, it's not just a heavy load at startup.I have 3GB ram and it's a dual core Centrino 2GHz so it's not an old system running out of resources and FF ran perfectly well under FC10.
View 5 Replies
View Related
Nov 5, 2009
I was trying to install the android sdk so I can write some apps and play around on a new droid phone i hope to get tomorrow. I had 64bit FC11 installed but the android stuff is only 32bit. I needed to install a bunch of the 32bit libs to get this to work. I installed FC11 64 bit. This cuased problems because the android stuff is 32bit. I couldn't get it to launch so I had to install the 32 bit libraries as well. A lot of the libraries could be removed but I think they will be helpful and useful in other stuff as well.
After installing these just follow the normal android install. I had another problem with the android install because the Ganymede Update Site was not checked so it wouldn't download the updates for the eclipse software. In the Software Updates and Addons window click Manage Sites, check Ganymede Update Site. Here is the link if you have to add it.[URL]..# instruction to get 32 bit android stuff in 64 bit FC11 Add an "rpm" Macro. You'll need this later or it will be hard to tell your rpm versions apart.
Add the following line to the "/etc/rpm/macros" file:
%_query_all_fmt %%{name}-%%{version}-%%{release}.%%{arch}
Code:
[stoggy@localhost][~]
[10:13 AM]$: echo "%_query_all_fmt %%{name}-%%{version}-%%{release}.%%{arch}" | sudo tee -a /etc/rpm/macros
%_query_all_fmt %%{name}-%%{version}-%%{release}.%%{arch}
[Code]...
View 5 Replies
View Related
Dec 3, 2009
I have installed last updates about 3 days ago. After this Fedora kernel 2.6.30.9-99.fc11.x86_64 does not start.booting it the last message I see"ADDRCONF(NETDEV_UP):wlan0: link is not ready" then it stops. I have to boot with a previous kernel version 2.6.30.9-96.fc11.x86_64.
View 2 Replies
View Related
Dec 29, 2009
I have an issue with kernel-2.6.31.9-174.fc12.x86_64. I ran the updates on Christmas Eve and it updated from kernel-2.6.31.6-166.fc12.x86_64 to kernel-2.6.31.9-174.fc12.x86_64. When I rebooted, I no longer received the Fedora Bubble boot screen. It comes up with the Fedora boot bar (across the bottom). Also, I receive failures during boot with the following:
[Code]...
View 6 Replies
View Related
May 22, 2010
I just installed the Fedora 12 live CD, but the driver for my EnGenius EUB 9801 (rt2870) USB WiFi adapter is not installed. I tried some of the suggestions found on this forum, but since I'm new at Linux I haven't yet been successful with installing the driver.
Does anyone know if the much larger DVD ISO already contains the driver built-in for the rt2870 for Fedora? If so I'm thinking it would be easier (for me) to just download the DVD ISO and re-install FC12 using that to get my WiFi USB adapter working.
View 5 Replies
View Related
Jun 16, 2009
Ive installed fc11 on my laptop (IBM lenovo R400). My work has a proxy which we must go through. I have set the proxy addresses in System Settings->Network Settings-> proxy. I have also run export [URL].. All seems to be ok, yum works from the command line, konquer goes out to the net just fine. However firefox wont connect to the internet no matter. The only way at the moment is to manually set the proxy in firefox.This doesnt seem right? Surely FF should pick up the system proxy? Does anyone have any ideas about this one?
View 3 Replies
View Related
Nov 20, 2009
I have recently installed FC12 64 bit. I have been using Fedora now since I first installed FC9 a few years back.
My main problem is that I am unable to execute any files at all using the ./filename command. I spent last night trying to run the ipod bootloader and all I kept on getting was the message: unable to run binary file. I used the command chmod +x ipodpatcher before attempting to run it, but with no luck. After a while of frustration and a few suggestions online I booted up my Ubuntu OS and the file ran first time. Am I missing a program on FC12? Do I need to install something else?
I feel it may be simple, however I have never experienced this problem before using Fedora. Any suggestions?
View 2 Replies
View Related
Dec 30, 2009
I have installed Fedora Core 12 and all seems fine. I have also set up the main repositories as was suggested on the following fedora set up guide website: [URL]. I have since tried to update my Fedora release with all the updates available, alas I get the following error message:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
View 4 Replies
View Related
Jan 11, 2010
Does any one have a way to speed up the internet on Fedora 12? I have a dual boot system with Vista x64 on the flip-side, and my wireless connection there is just fine. But when I get on this side, it goes back to the dial-up days (yes I said the DU word). yum updates seem to be just fine, and e-mail seems to be fine. just firefox is slow. And now that I put the x64 Flash in (thanks to leigh123linux), with that working too it seems even a little slower again.
View 3 Replies
View Related
May 28, 2010
I have configured the Adobe repos and when I try to install Adobe Reader, yum gives me the following error:
Code:
Transaction Check Error: package nss-softokn-freebl-3.12.4-19.fc12.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed I tried --skipbroken as a longshot to no avail. Obviously if I try to remove nss-softokn-freebl it tries to remove all of Fedora , looked in Koji but there is nothing in there either.
View 14 Replies
View Related
