Fedora :: Does FC11's KDE 4.2 Replace The FC10 KDE Taskbar
Jun 15, 2009
Once of the biggest issues I had with FC10's KDE desktop was its taskbar widget and how it worked. It did not group tasks, didn't stack vertically, etc. etc. I understand this was due to KDE 4.1 which was a or is considered a "broken" KDE release? I've read that many ppl say KDE 4.2 is much better in FC11. Many FC11 reviewers state they like its KDE version better than 4.1 shipped with FC10.
However, has the KDE taskbar widget specifically been replaced or upgraded? Anyway, I'm considering an upgrade, and I'm willing to do it JUST to get another taskbar in KDE... if the 4.2 one is an improvement. Fondest wish is for it to be exactly like the KDE 3.5 taskbar widget from FC6!
View 2 Replies
ADVERTISEMENT
Oct 12, 2009
I recently update FC10 to FC11 and Yum has stopped working. Also, "Add/Remove Software" has no packages listed. And, I have no Software repositories listed. When I try to run Yum I get the following:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
[Code]...
View 1 Replies
View Related
Jun 9, 2009
I'd like to try a clean install instead of an upgrade from FC10 to FC11. What is a good way of getting the list of all packages that were installed through yum, and how do I feed that list to yum on a newly installed FC11?
View 7 Replies
View Related
Jun 22, 2009
I've been running FC10 with all updates and had downloaded the FC11 DVD. Yesterday I upgraded to FC 11 using the DVD and it appeared that everything went fine. However when I tried to do ayum updateI got the following error. There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
No module named yum
install a package which provides this module, or verify that the module is installed correctly.
It's possible that the above module doesn't match the current version of Python, which is:
2.6 (r26:66714, Mar 17 2009, 11:44:14)
[GCC 4.4.0 20090313 (Red Hat 4.4.0-0.26)]
go to the yum faq at: [URL] I'm not sure what to do next. I also noticed that all my previously configured repositories are lost.
View 3 Replies
View Related
Jul 8, 2009
I'm having a problem getting BIND to start after doing the FC10->FC11 upgrade. Others have been reporting some bad symbolic links, but this isn't that problem. I've searched the forums here, but I don't see anything like this anywhere.
Here's what I see:
Code:
[root@atomu etc]# /etc/init.d/named start
Starting named: [FAILED]
So, no error message. Logs read as follows:
Code:
Jul 8 00:38:00 atomu named[2414]: starting BIND 9.6.1-RedHat-9.6.1-2.fc11 -u named
Jul 8 00:38:00 atomu named[2414]: built with '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc'
[code]....
View 4 Replies
View Related
May 15, 2010
After trying to do a upgrade to fc11 from fc10 it seems i am stuck between them. the grub loader only shows 1 fc11 kernel, but when i try yum update all the updates are fc10, Some libs are so.8 and some are so.7 namely libssl.so.8 and the missing deps are libssl.so.7.
is there a way to revert back to fc10 or force install of fc11.
compaq evo n400c
no floppy no cdrom can get usb flash to work.
View 4 Replies
View Related
Jun 24, 2009
I upgraded from FC10 to FC11 yesterday.I had no problems using FC11 after I looked into the bootloader (not intuitive - Ha!).Tried to boot up this morning; and things seemed to work well until I tried to call up Firefox (added a few themes yesterday).The window pops open; but the computer freezes on the spot with an alarm (generic "beep", w/o the finishing "p").Tried it with Epiphany; and I get the same results with the exception of actually getting to the Home Page.Yum works for the most part - I reinstalled Firefox (no effect); but couldn't reinstall epiphany (keeps saying "there is no such package - did you mean 'epiphany'". No typos on my part - go figure). Doing Software/Package Updates (via System Menu) freezes the box as well.Did it with the system monitor on. It doesn't appear to be related to CPU Usage.
Had a FC10 liveUSB and used it for awhile (e.g. to check out the forums). After giving my ISP some grief about downloading speed, immediately received a note from their Abuse Department, saying that my machine had been infected with a virus and had been sending spam emails (post upgrade to FC11).
View 14 Replies
View Related
Aug 2, 2009
How can I force the upgrade FC10 -> FC11 with online download? Somewhere in Software Update settings?
View 2 Replies
View Related
Apr 7, 2010
I have programs that work in FC10 and FC12, but when I run them on FC11, i get behaviour that is very similar to a deadlock. They don't crash or anything. It just seems that all program output stops at one point and never resumes. I am wondering if FC11 has any known threading issues that one may need to know about before trying to use it to run their software from FC10 or FC12. Maybe something in the way that threading is handled differently from FC10 or FC12 that is not necessarily a problem, but just needs to be kept in mind when writing code for FC11.
View 10 Replies
View Related
Jul 20, 2009
I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies
View Related
Jul 29, 2010
In Windows 7 when you hover over an open application in the taskbar, it shows a small image of that application. Is there a way this can be done in Linux?
View 1 Replies
View Related
Dec 10, 2009
How do I update from FC10 to Fedora 12 from the command line.
View 2 Replies
View Related
Jan 6, 2009
When trying to launch firefox after upgrading to FC10, I get:Couldn't load XPCOM
View 4 Replies
View Related
Mar 26, 2009
just as the title states i need to upgrade my os from fc4 to fc10 first let me say i have no physical access to the box. all i have is root ssh access to it. So i need to know the best way of upgrading that will be safe. before i do the upgrade the server will be backed up so i will not loose any files. if the upgrade fails the data center will reload the os with what i need on it. but i would rather not have to format.
View 6 Replies
View Related
Jun 13, 2009
After upgrading to F11 I have had a few problems with some applications most like miro I was able to fix by using yum remove and then reinstalling. It appears that after updating some applications have stayed with the fc10 versions despite fc11 versions being available.
yum list | grep fc10 | grep installed
anthy.i386 9100h-4.fc10 installed
compat-db45.i386 4.5.20-5.fc10 installed
cronie.i386 1.2-8.fc10 installed
[code]...
View 14 Replies
View Related
Aug 6, 2009
I did the yum preupgrade install, all went well, did preupgrade -gui ; did everything fine, then i got the REBOOT now to start updating, clicked and i have just
View 5 Replies
View Related
Feb 4, 2010
I'm about ready to give up! The modem is a USR5610C it has an rpm file. I guess I'll also need to know if I'm starting it correctly, by restarting the machine.
View 1 Replies
View Related
Feb 4, 2010
how do install mplayer on fc10?
View 7 Replies
View Related
Dec 7, 2009
On fc7-10 I was able to get them going after installing gstreamer packages with yum.
For fc11 I have followed half a dozen guides, installed numerous packages, but can't seem to figure out what is missing.
Anyone know what to install for mp3's on fc11 ?
View 3 Replies
View Related
Jan 27, 2009
I want to backup my apache website using tar. I want to make sure all the permissions and such stay the same so that if I restore a website, it's ready to go exactly as it had been.I am using the following command and would like to know if there is anything else I should neeed to do?
tar --xattrs cvzf backup.tgz /path-to-webserver-files
Now my other question is since tar doesn't store absolute paths, when I run the restore I have to be in the root directory? In another words if I run the command in a user directory will tar do something retarded like encode the paths as ../path-to-webserver or will it just be path-to-webserver so that when I run the restore from the / folder it will automatically go into the right place?
View 4 Replies
View Related
Feb 4, 2009
So my server running FC4 died last night and I decided to go ahead with the long-awaited upgrade to FC10 while I was rebuilding my server. I use my server for a number of things including, but not limited to: router, firewall, web server, mail server... I have a typical configuration process that I have followed since before fedora, and it has worked well for me up through FC4, but my usual config process doesn't work on FC10.
First of all, I don't want SELinux running, I didn't see an option to not install it during the FC10 setup, so how to I properly disable or uninstall it afterwards? Second, I was unable to even configure the server to route traffic from my internal network to the web, here's the process I usually go through for this:
[Code]...
I don't have a static IP from my ISP, so I'm not quite sure how to add the default route. I think I need to do something like "route add default gw xxx.xxx.xxx.xxx eth1" where eth1 is my external NIC, correct?
What else do I need to do to route traffic? I noticed that I wasn't even able to ping my server from the internal network even though they are on the same subnet, my server's internal NIC has an address of 192.168.7.1 and my computer on the network has an address of 192.168.7.2. If I can get this going to I have internet access again at the very least, I can move forward with the web server, email, etc.
View 8 Replies
View Related
Feb 6, 2009
I'm currently running FC9 and I have no problem with my network connection. Now I just installed FC10 on another partition too try it out, but I don't seem to get it work. I disabled the NetworkManager (like in FC9) and enabled the Network. I'm using static IP, when in go in Network Configuration/Ethernet Device/General, the subnet mask is always taking the address of the Default gateway address when I press OK.
my subnet mask is 255.255.255.0, and my gateway is 192.168.1.1, but after I press ok they both go back to 192.168.1.1
View 3 Replies
View Related
Mar 21, 2009
I and my friend use FC10 on our laptops. We want to share our data by creating a wired network between our machines because a wireless router is something what our pockets can't afford. What should I do for it? What type of wires and stuffs do I need? I Googled for some link for doing so in FC10 but couldn't find.
View 6 Replies
View Related
Mar 30, 2009
I was forced to reinstall fc10 a couple of days back and from them the bootingup is really slow(takes more then 1 minute to show login screen). before the reinstall, it was quite fast. i dont know what went wrong.
[Code]....
View 2 Replies
View Related
Apr 16, 2009
I recently setup a file sharing server with FC10 running Samba...
I got it running perfectly and it ran great for a few weeks. I was working on the machine today and tried to reboot it and noticed that it was stuck on FC10's new boot screen. I pressed the esc key and saw that the boot process was stuck on the smb service...
I don't get any errors and the machine doesn't freeze up or anything, it just hangs on the smb service and won't continue with the boot...
Is there anyway that I can get the system to skip the smb service so that I can get into the system? I don't know what's changed or what's causing this sudden hang in the system at boot.
I tried the ubuntu live CD to attempt to go in and edit the /etc/rc5.d scripts to try and skip the smb service start but I am not sure where to look for it...
View 4 Replies
View Related
Apr 16, 2009
I am trying to install systemc v2.1.0 on fc10 with gcc 4.3.2. I have gone through the previous posts for systemc installation with gcc 4.3.2 and have installed the patch ,
added the following headers in systemc-2.2.0/src/sysc/utils/sc_utils_ids.cpp
#include "string.h"
#include "cstdlib"
but it did not work out.This is what I get The complete installation process is as follows
$tar xvzf systemc-2.1.v1.tgz
$cd systemc-2.1.v1
$wget http://www.kix.in/misc/patch_systemc-2.1.v1-gcc4-osx // patch from post
$patch -p0<patch_systemc-2.1.v1-gcc4-osx
[code]....
View 1 Replies
View Related
May 3, 2009
After to download the firefox-3.0.10.tar.bz2I have the next problem
Code:
firefox-3.0.10]$ ./firefox
./run-mozilla.sh: ./firefox-bin: /lib/ld-linux.so.2: bad ELF interpreter:
[code]....
View 11 Replies
View Related
May 27, 2009
installing IE on FC10 as I need it to access company email I installed wine first as #yum install wine* then I installed cabextract as #yum install cabextract after that I downloaded IEs4linux and run the script ad $./ies4linux I got the following message in the terminal "IEs4Linux 2 is developed to be used with recent Wine versions (0.9.x). It seems that you are using an old version. It's recommended that you update your wine to the latest version (Go to: [URL])" and in the install window script couldn't download flash and it seems to be hang every thing is stopped and I didn't get any message in terminal or in installation window.
View 1 Replies
View Related
Sep 10, 2009
I made a big mistake on my FC10 machine-while trying to resolve a way to install vlc- I wrote the following command:"yum erase rpm lib".After restarting the machine fedora did not load... (might be funny- I laughed...).Do you know of a way top recover from this state? (I have the liveCD disk),
View 2 Replies
View Related
Oct 17, 2009
Sometimes (but not every time), when booting my Dell Inspiron 530, eth0 will not come up right away. I can boot and log in to Gnome, and the NetworkManager applet shows that the ethernet cable is unplugged. After sitting for 5-10 minutes, it will link up and everything works. If I unplug the network cable and plug it back in, it comes right up. But once it's linked, it works fine and never disconnects after that. I've tried switching to a different port on my switch and a new ethernet cable. So I suspect it's some sort of weird kernel problem. I checked /var/log/messages and the only thing that looks weird is:
Oct 17 07:51:49 obi-wan kernel: e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
Oct 17 07:51:49 obi-wan kernel: e1000e: Copyright (c) 1999-2008 Intel Corporation.
Oct 17 07:51:49 obi-wan kernel: e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level,
[Code].....
But I have a second Inspiron 530 that has the same entry and it works fine. Has anybody seen a problem like this? I've looked around and so far can't find out the exact issue. I've upgraded NetworkManager to the latest version for FC10
View 3 Replies
View Related
