After trying to do a upgrade to fc11 from fc10 it seems i am stuck between them. the grub loader only shows 1 fc11 kernel, but when i try yum update all the updates are fc10, Some libs are so.8 and some are so.7 namely libssl.so.8 and the missing deps are libssl.so.7.
is there a way to revert back to fc10 or force install of fc11.
compaq evo n400c
no floppy no cdrom can get usb flash to work.
How can I force the upgrade FC10 -> FC11 with online download? Somewhere in Software Update settings?
View 2 Replies View RelatedI cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies View RelatedI recently update FC10 to FC11 and Yum has stopped working. Also, "Add/Remove Software" has no packages listed. And, I have no Software repositories listed. When I try to run Yum I get the following:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
[Code]...
I'd like to try a clean install instead of an upgrade from FC10 to FC11. What is a good way of getting the list of all packages that were installed through yum, and how do I feed that list to yum on a newly installed FC11?
View 7 Replies View RelatedOnce of the biggest issues I had with FC10's KDE desktop was its taskbar widget and how it worked. It did not group tasks, didn't stack vertically, etc. etc. I understand this was due to KDE 4.1 which was a or is considered a "broken" KDE release? I've read that many ppl say KDE 4.2 is much better in FC11. Many FC11 reviewers state they like its KDE version better than 4.1 shipped with FC10.
However, has the KDE taskbar widget specifically been replaced or upgraded? Anyway, I'm considering an upgrade, and I'm willing to do it JUST to get another taskbar in KDE... if the 4.2 one is an improvement. Fondest wish is for it to be exactly like the KDE 3.5 taskbar widget from FC6!
I've been running FC10 with all updates and had downloaded the FC11 DVD. Yesterday I upgraded to FC 11 using the DVD and it appeared that everything went fine. However when I tried to do ayum updateI got the following error. There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
No module named yum
install a package which provides this module, or verify that the module is installed correctly.
It's possible that the above module doesn't match the current version of Python, which is:
2.6 (r26:66714, Mar 17 2009, 11:44:14)
[GCC 4.4.0 20090313 (Red Hat 4.4.0-0.26)]
go to the yum faq at: [URL] I'm not sure what to do next. I also noticed that all my previously configured repositories are lost.
I'm having a problem getting BIND to start after doing the FC10->FC11 upgrade. Others have been reporting some bad symbolic links, but this isn't that problem. I've searched the forums here, but I don't see anything like this anywhere.
Here's what I see:
Code:
[root@atomu etc]# /etc/init.d/named start
Starting named: [FAILED]
So, no error message. Logs read as follows:
Code:
Jul 8 00:38:00 atomu named[2414]: starting BIND 9.6.1-RedHat-9.6.1-2.fc11 -u named
Jul 8 00:38:00 atomu named[2414]: built with '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc'
[code]....
I upgraded from FC10 to FC11 yesterday.I had no problems using FC11 after I looked into the bootloader (not intuitive - Ha!).Tried to boot up this morning; and things seemed to work well until I tried to call up Firefox (added a few themes yesterday).The window pops open; but the computer freezes on the spot with an alarm (generic "beep", w/o the finishing "p").Tried it with Epiphany; and I get the same results with the exception of actually getting to the Home Page.Yum works for the most part - I reinstalled Firefox (no effect); but couldn't reinstall epiphany (keeps saying "there is no such package - did you mean 'epiphany'". No typos on my part - go figure). Doing Software/Package Updates (via System Menu) freezes the box as well.Did it with the system monitor on. It doesn't appear to be related to CPU Usage.
Had a FC10 liveUSB and used it for awhile (e.g. to check out the forums). After giving my ISP some grief about downloading speed, immediately received a note from their Abuse Department, saying that my machine had been infected with a virus and had been sending spam emails (post upgrade to FC11).
I have programs that work in FC10 and FC12, but when I run them on FC11, i get behaviour that is very similar to a deadlock. They don't crash or anything. It just seems that all program output stops at one point and never resumes. I am wondering if FC11 has any known threading issues that one may need to know about before trying to use it to run their software from FC10 or FC12. Maybe something in the way that threading is handled differently from FC10 or FC12 that is not necessarily a problem, but just needs to be kept in mind when writing code for FC11.
View 10 Replies View RelatedI installed the new version of Chrome yesterday and all of the fonts are way too small and the pages don't look right at all. I tried doing the page zoom, but that makes the pages look even worse. Has anyone had the same issue? Is there a fix? Is there a way to revert back to version 5?
View 2 Replies View RelatedA while back I had to install an extra yum rpm repository to my CentOS 5 server as I needed newer versions of httpd (v2.2. and php (v5.1.6) than were in the default repositories at the time.
I now wish to revert back to the standard repositories, I have removed reference to the custom repository from etc/yum.repos.d/ and used '# yum clean all' but cannot seem update these packages when I use '# yum update'.
Is there a way of making the rpm packages for httpd and php go back to using the standard repos, or will I have to manual update them from now on?
Or could I uninstall those rpms and reinstall from default repo without breaking the whole server?
When I first log in with XFCE, I have an option to use the Default Panel or blank. I opted for blank.
1. How do I revert back to the default panel?
2. How do I remove all instances of the panel?
installed F12 and noticed that the volume control applet is now all Pulseaudio rubbish, not Alsa like gmixer used to be. So now I don't seem to be able to mute my speakers when I'm using my headset, which in F10 I could do by just muting LFE/Center.Note I don't want the speakers to be disabled when I have the headphones plugged in (like Jack does) I just want to be able to control volume of the mixer channels individually - as sometimes I'll be playing music through the speakers and will receive a Skype call and want to mute the music, but also don't want the Skype sound coming out of the speakers - just the headphones.
I've tried setting up 4.1+input, 5.1+input, 4.0+input etc; but for some reason, even though the PulseAudio mixer thing has 5 individual sliders, they do nothing as they "jump" back to 100% when you slide them - even with the channels unlocked. gmixer and alsamixer do the job, but pulseaudio is the applet and only seems to control the master volume, not the individual channels. Any ideas - or perhaps a way to make gnome-volume-control revert back to actually being gmixer?
I've recently installed openSuse 11.4 64bit with KDE 4.6 and that's when the trouble started. If I put a data or mp3 cd in the drive it can be mounted. Simple audio cds refuse to mount, giving me only the option to play on one of the audio players. Since I wanted to move some music to the computer I've had to resort to windows to copy files then transfer them. How can I force KDE/Suse to behave the way I want or do I have to revert to an earlier version with KDE3.5? I suspected that System Settings/Removable Devices was where I needed to be but nothing I did worked. So then I tried playing with System Settings/Device Actions and again nothing seemed to work. I can't mount the CD manually,I get this (using su -c "mount etc"
mount: block device /dev/sr0 is write-protected, mounting read-only
mount: /dev/sr0: can't read superblock
Is there anyway I can convert back ubuntu 11.04 into the old standard GUI style?
My biggest concern is having a taskbar and not having that weird bar on the left.... But id also like the old menu bar and the ability to have multiple workspaces....
Ok I just upgrade my openSuSE from 11.2 to 11.3.. via free wireless at the library then I just found out that there is additional view on desktop configuration, if i'm not mistaken it's newspaper view.. after I click OK.. all my shortcut disappear.. now my problem how to revert back because right click is not function anymore...here my desktop after whar I did just like I mentioned just now..
View 1 Replies View RelatedHow do I do it? I only installed the packages from ubuntu and not the whole thing from the cd.
View 6 Replies View RelatedI have upgraded to 10.10 and I want to go back to the font used in 10.04. What was the name of the font in Lucid? Moreover, how do I make Google Chrome adopt this change? It is currently rendering all the web-pages with the Ubuntu font and I want whatever 10.04 was using. If I change the font in the Appearance -> Fonts panel, Google Chrome does not update.
View 2 Replies View RelatedUbuntu 10.10 64bit
Some of my daily tasks in my root crontab didn't take place today. When I went into crontab (crontab -e) it reverted back to it's default state. Has anyone seen this happen before?
i feel really stupid for "upgrading" to gnome 3 to try it out and read warnings saying it can mess up your system. i went on thinking oh it'll be fine and the update process messed up or something. now i have a barely functional desktop and just want to go back to unity 11.04. i added the ppa from[URL]
View 3 Replies View RelatedXubuntu 11.04 is skinned to how Canonical felt it would be best, now I do like it, but I was wondering if there is a way to get XFCE to the way it actually looks by removing all skinning?
View 5 Replies View RelatedI upgraded U. 9.04 to 9.1 over the net a few days ago and got stung by the 'Driver' issue. Namely, my nvidia card is not reconciled and as a result, the monitor remains blank. I am assuming that the remainder of the upgrade went o.K. though I can only follow the boot sequence on the monitor during the bios start up.
I have a live disk of U. 9.04 and want to revert back to it, preserving my data. When I put in the disk and am hopefully asked if I want to "Upgrade", will it work in reverse, so to speak. I understand that there is a problem with compatible libraries etc. but will it ignore this and simply replace the new with the old?
I had a desktop pc running XP home, my daughter has an Acer Aspire 100 running a Linux OS which developed a problem so I attempted to create a recovery disk from the supplied DVD onto a memory stick via my desktop PC. It transpires that the recovery wasmade to my desktop pc in error and now my desktop does not boot up at all. Is there a way to remove this 'recovery' at all and revert back to XP??
View 14 Replies View RelatedWhen installing ubuntu I selected my back up NTFS partition as a swap drive for ubuntu and now i cant access my files so does anybody have a solution to revert the partition back to be Labelled as NTFS so i can access my files.
View 9 Replies View RelatedIt seems I had some kind of intrusion and I found 6 files changed its ownership to user 1035 and group 1035, I don't know how but I need to change them back to its original owner (root) because one of them is the ls command and the other is the ifconfig how can I revert them to its original state? I cant do it with chown.
View 3 Replies View RelatedI made the error of installing FGLRX on lucid. After the install, Plymouth resolution sucks and my laptop will not come out of suspend/hibernate. When I use jockey-gtk to disable FGLRX, it will not allow me to use compiz for 3d graphics. However, out of the box, I was able to run compiz no problem.How can I revert lucid back to factory form, where it was able to perform 3d acceleration without the use of FGLRX?
View 3 Replies View RelatedI am running Ubuntu 10.10 and I have been keeping it updated via update manager.Last night the update manager popped up and I selected to update all required updates without checking what the updates were.While shutting down I noticed that I needed to reboot to complete the update, so I rebooted.After reboot the wireless network card disappeared. So I moved the PC and plugged in the ethernet cable. Oddly sometimes it shows disconnected for no reason and I have to reboot.What's even worst is that Ubuntu now locks up completely within 15 minutes of a reboot.None of the alt+sysrq commands do anything!How do I find out what the updates were and is there any way to I revert my system back to pre updates without having to reinstall?
View 6 Replies View Relatedhow do install mplayer on fc10?
View 7 Replies View RelatedI am trying to install systemc v2.1.0 on fc10 with gcc 4.3.2. I have gone through the previous posts for systemc installation with gcc 4.3.2 and have installed the patch ,
added the following headers in systemc-2.2.0/src/sysc/utils/sc_utils_ids.cpp
#include "string.h"
#include "cstdlib"
but it did not work out.This is what I get The complete installation process is as follows
$tar xvzf systemc-2.1.v1.tgz
$cd systemc-2.1.v1
$wget http://www.kix.in/misc/patch_systemc-2.1.v1-gcc4-osx // patch from post
$patch -p0<patch_systemc-2.1.v1-gcc4-osx
[code]....