I have been trying to update from Fedora 10 to a newer version, when I try the auto update thing that pops up occasionally it says newer version available and lists Fedora 11, when I click on the preinstall which I thought was some info on it iyt starts trying to update to Fedora 12. I posted about this earlier (I can not even find the thread any more) and an administrator pointed me to a wiki which stated there is no way to get from 10 to 12. My question is how do I even get to 11, when I tried the preinstall the trouble I ran into was no space in /boot. I tried to remove other installs and when I went to the preinstall again it froze and I waited an hour then switched off the machine. Upon rebooting I got a message missing file and could not boot at all so i reinstalled Fedora 10. Now I am stuck as I tried a yum install as another suggested and could not get repository, and I had a working internet connection. I also seen in your list of laptops that work my laptop works but has some problems with internet. I can not use wireless, in reality I occasionally can use wireless, what I can always use is my sprint cdma broadband card, will I lose this if I try to upgrade, would I be best to try and burn an iso image and if so is there any way to figure out if it has cdma support?
I have a 3dsp pci wifi card, and the last kernel it supports is Ubuntu 10.04 2.6.32-(21-24) I want to update but dont want to accidentally update the kernal.
My office PC is offline, so I download updates/12/x86_64/{drpms,repodata} from fedora reposiroty to my home PC then copying them to my office PC's ftp server. Then I use yum to update from my own repository server. But I found the drpms are not enough to perform a complete updating. Some *.rpm pakage are still need download.
My question is: How do I know which package should be complete downloaded from rpm and which package download the drpm is enough?
I can install and update Fedora11 as well as other softwares at my office through internet. However, at home I don't have any net connection. Is it possible that I collect all files including their dependencies from my office computer in a pen drive and then update my home computer?
Can I update from F12 32bit to F14 64bit without doing a fresh install, and preferably using preupdate? Would most of the already installed programs still work?
In Fedora 10 evolution 2.24.5 is installed. I have downloaded and extracted evolution-2.30.1 to my home folder. Evolution still shows 2.24.5 not 2.30.1. How do I update 2.24.5 to 2.30.1? Do I just commamd install 2.30.1, and if so, how?
I recently upgraded Fedora 9 to Fedora 10 on a triple boot system (Fedora 9, Win XP and Ubuntu 8.04). The upgrade seemed to run fine until rewriting the boot loader, which failed. The old Fedora 9 entries remained. The Fedora 10 installation is found by Supergrub but attempting to boot generates the error: Error 15: File not found
When i tryed to update my virtualbox 3.0.12 to 3.1. i got an error message. #yum install VirtualBox-3.1-3.1.2
file /usr/share/virtualbox/nls/VirtualBox_pt_BR.qm from install of VirtualBox-3.1-3.1.2_56127_fedora12-1.x86_64 conflicts with file from package VirtualBox-3.0.12_54655_fedora12-1.x86_64 file /usr/share/virtualbox/nls/VirtualBox_ro.qm from install of VirtualBox-3.1-3.1.2_56127_fedora12-1.x86_64 conflicts with file from package VirtualBox-3.0.12_54655_fedora12-1.x86_64 file /usr/share/virtualbox/nls/VirtualBox_ru.qm from install of VirtualBox-3.1-3.1.2_56127_fedora12-1.x86_64 conflicts with file from package VirtualBox-3.0.12_54655_fedora12-1.x86_64 file /usr/share/virtualbox/nls/VirtualBox_sk.qm from install of VirtualBox-
Earlier today I was simply on my laptop watching videos, I finish, shut my PC down. I reboot hours later only to get greeted by the Fedora Boot Splash Screen and shortly after nothing but blackness, no login screen or nothing, I see the mouse cursor shortly after the boot splash for 2 seconds then it disappears. I made no recent changes to any files besides applying some updates via the package manager, I had to recently reformat due to a self-blunder and lost crucial data, now a week has passed and I've managed to "rebuild" my data loss back up. Now this is hindering my college course work which is done online.
I have a number of systems with Fedora on them, they are connected to a network but are not allowed to connect to the internet. So I am trying to find a solution to patch these systems in a simple way.My solution which i thought of, however, still having a problem with is as follows:
1- Download the files from the "repodata" (e.g. for "update" repository) using a machine that is connected to the internet.
2- Copy these files(e.g. using flash drive) to one on of these Fedora systems into the /var/cache/yum/i386/12/updates (or /var/cache/yum/updates for older versions).
3- Run "yum -C check-update" (-C so it will not try to update and will use the local files). (I am having a problem at this step and I get this message "no such table: packages", the solution that i found on the internet suggested cleaning the cache which is not what i want to do!).
4- After getting the list of needed files I will parse the primary.xml.gz file and grab the actual file names then append the base URL to them and save it into a file.
5- take that file to the online machine and run wget to grab all needed patches.
6- Take the files back to the system and put them in (i think /var/cache/yum/i386/12/updates/packages/) and run "yum -C update" However, now i am having a problem with step 3 and also not sure if step 6 is correct.
So does any of you guys know how to solve this, or if there is a better or easier way to do this??* Keep in mind that those machines are not allowed to connect to the internet or even connect to another machine that is connected, but we still need to patch them and keep them secure.
I have a crash that occurred after first install while updating. The update was 1.2GB Had to reboot 5 times to complete the update downloading process. Much of what I read suggests KDE, xorg and qemu as part of what is causing the crash, but I haven't found a similar issue. After the update completed installation the crashes were less severe but still occur when updating.
Code: yum update The latest crash occurred after yum update and left a large amount of information in konsole. It disables wireless networking so not sure how the bug is related. During the first yum update I had to reboot the system to get full functionality back. After the first update I just had to wait for system to return to normal.
Code: Complete! [Whereareyou@Iamhere ~]$ kdeinit4: preparing to launch /usr/lib64/libkdeinit4_kbuildsycoca4.so <unknown program name>(2413)/ KStartupInfo::createNewStartupId: creating: "Iamhere;1274481784;509281;2413_TIME0" : "unnamed app" kbuildsycoca4 running... Error: "/var/tmp/kdecache-Whereareyou" is owned by uid 500 instead of uid 0. kbuildsycoca4(6739) kdemain: Reusing existing ksycoca kbuildsycoca4(6739) KBuildSycoca::recreate: Recreating ksycoca file ("/var/tmp/kdecache-Whereareyou/ksycoca4", version 162) kbuildsycoca4(6739) KBuildSycoca::createEntry: new: "screensaver.desktop" kbuildsycoca4(6739) VFolderMenu::pushDocInfo: Menu "applications-kmenuedit.menu" not found. kbuildsycoca4(6739) VFolderMenu::mergeFile: VFolderMenu::mergeFile: "/etc/xdg/menus/applications-merged/ggz.merge.menu" kbuildsycoca4(6739) VFolderMenu::mergeFile: VFolderMenu::mergeFile: "/etc/xdg/menus/ggz.menu" ................................cut out info to fit post requirement kbuildsycoca4(6739) KMimeAssociations::parseAllMimeAppsList: Parsing "/usr/share/kde-settings/kde-profile/default/share/applications/mimeapps.list" kbuildsycoca4(6739) KBuildSycoca::save: Saving kbuildsycoca4(6739) kdemain: Emitting notifyDatabaseChanged ("services", "apps") --Cursor stays here, hanging out--
I have downloaded all packages and prepared to update my laptop (Lenovo 3000 N200, F10 x86_64) from F10 to F13 via preupgrade. Everything works fine, until I reboot and go into the upgrade process.
The problem is at the screen which configs NetworkManager. It shows only two interfaces, eth0 and wlan0, but I use a 3G dongle to connect to the internet. I tried feeding random values for the fields, but it does not allow to go beyond without configuring NetworkManager first.
can I work around the upgrade process without configuring NetworkManager? ie. can I do that manually after installing the upgrade?
My PC lost power while updating. After booting, I run update once again and everything seems to be fine, except the message "could not do simulate: coreutils-libs-8.4-8.fc13.i686 requires coreutils = 8.4-8.fc13 : Success - empty transaction".
When I try using "yum update", I receive the error message below.
Loaded plugins: refresh-packagekit Setting up Update Process Resolving Dependencies --> Running transaction check
Ok so I have some music that I have burned from cds, within windows, I have them in a wma format. The video player, handles those songs just fine. However I really enjoy using the Audacious player. Whenever I try to run in Audacious,Is there a way to update the decoders for audacious specifically, either through the repo or CLI?
I need to update a system, but the network connection is way too slow to run yum over the network. I have the update directory downloaded. Can I have yum get files from local files?
im running centos 4.4final and i have glibc, and glibc_common installed on version 2_3. Im trying to install the 2_9 rpm, but it says that it conflicts with 2_3, how can i upgrade the 2_3 to 2_9? i tryed using yum update glinc / glibc_common, and yum install, didnt work.
I (or rather, the Yum auto-update) try to update the TeXLive on my FC11 machine but the update fails due to 'missing dependency', spitting out
Missing Dependency: libpoppler.so.4()(64bit) is needed by package texlive-2007-46.fc11.x86_64 (updates)
And strangely now (perhaps for a combination of reasons) I cannot use my auctex. I would like to finish this update anyway, and tried to find libpoppler.so.4 separately, which I haven't yet been able to locate. Poppler itself is installed and updated, and I do see libpoppler.so.5 in my system. So where would I find libpoppler.so.4 on its own? Or should I perhaps downgrade poppler?
after updating to kde 4.3.3 PyQt4 updated to 4.6.2 since that eric is open with lots of errors and when i try to run apython script inside it the run fail
i reported a bug https://bugzilla.redhat.com/show_bug.cgi?id=541982
I have installed Fedora Core 12 and all seems fine. I have also set up the main repostiories as was suggested on the following fedora set up guide website:[URL]..I have since tried to update my Fedora release with all the updates available, alas I get the following error message:
Error Type: <class 'yum.Errors.RepoError'> Error Value: Error getting repository data for installed, repository not found File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main() File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main backend.dispatcher(sys.argv[1:])
I'm running kernel-2..32.12 from updates-testing. I have a Broadcom 4312 wireless card, how do I upgrade the drivers so they work with this kernel? There isn't undated versions of broadcom-wl & kmod-wl in updates-testing.
Just recently i updated fedora 12 which is of kernel version 2.6.31.5-127.fc12.i686.PAE. Then i rebooted the machine and got two options on boot loader i..e
Now when i choose the newer kernel, booting stops with a blinking cursor but i can boot and logged in on the older kernel. i even add 'nomodeset' and pressed escaped key but to no avail. Actually just when gdm is about to be loaded, i think it crashed.
It has been working until this. I shouldn't think that I need both the 586 and the 64 versions, but it won't let me get rid of the 586 version. Trying to do that results in:
Code:
Is trying to remove kdelibs-6:4.4.1-1.fc11.i586 what I should be doing? Or am I being dense?
I've grown very fond of Gwibber, since the introduction of F13 as a Twitter-client. However since 5 daysGwibber is no longer updating the timeline. As the problem maintained, I also installed Pino and Twitux.But they seem to have the same problem. I've tried to uninstall and re-install them, but that didn't solve my problem.
I installed some updates this morning to my F14-64 system. Both Thunderbird and Thunderbird-lightning were updated. Now, Thunderbird won't start at all. The process is running, but no window ever appears.The only thing I've tried at this point is running 'thunderbird -safe-mode' from the command line to disable all plugins, but the result is the same as just running 'thunderbird' -- it just hangs. It doesn't *appear* to be a plugin problem
I upgraded from F14 to F15 using the DVD. The network worked fine after the upgrade.This morning I updated to the latest RPMs and rebooted, and now the network donot work!ifconfig shows only the lo interface. NetworkManager does not start, /var/log/messages shows signal 11.I tried to boot with the original kernel, but the results are the same.
I am trying to upgrade RHEL 5.0 to a specific SP...5.2, is it possible to specify the version you want to upgrade to versus an update all that will take it to the latest release?
I got a problem while updating KDE from 4.1.2 to 4.2. In our college we can't download more than 20MB officially. So I'm unable to get kdegames which is 32MB from Konsole so I downlaoded it using proxy and I copied it into the /var/cache/yum/updates/packages/ folder and now using this command (yum groupinstall 'KDE (K Desktop Environment)').
I tried to update to KDE 4.2 using Konsole but it is showing: Error Downloading Packages: 6:kdegames-4.2.0-1.fc10.i386: failure: kdegames-4.2.0-1.fc10.i386.rpm from updates: [Errno 256] No more mirrors to try.
And even by double-clicking the KDEgames rpm file I'm unable to install it is saying GPG (I'm not sure GPG or not, start with G i think) Key missing so it is taking too much time and not doing anything.
I install the fc11 from Fedora-11-i386-DVD.iso. The software update has just updated my fc11 kernel from 2.6.29.6-217.2.3.fc11.i686.PAE to 2.6.29.6-217.2.7.fc11.i686.PAE. If I boot using the new kernel, The screen resolution is not correct (everything gets bigger) and the screen goes into blank white screen suddenly after log in.
I have a geforce 8600gt card and installed its driver (for pae kernel) as suggested on this link: [URL]Everything goes well untill I update the kernel.
