Problem occured yesterday and has added 3 mins to my boot time. all i can say about it is that it occured after a yum update and then a crash while using wine. i navigated to the file but really cant say much about it. however the pci call there makes me wonder if it is related to the post below.
Starting udev:
Wait timeout. Will continue in the background.
I am trying to install ubuntu 11.04 to my laptop, currently I have 10.10 installed and working. When I try to boot the computer from USB for installation, I get (after waiting a few minutes):
[Code]...
I am currently using windows 7 and ubuntu as dual boot. I didnt have this problem when I was installing 10.10. I am not sure but I think I upgraded my BIOS after my 10.10 installation, so that might be related. I didnt change anything else related to hardware since.
I am not sure what other information I should provide, Also note that given error message might not be 100% correct as I have typed it from a photo.
F15_x64, upgraded from F14 on Sandy Bridge. Any idea how to troubleshoot this slow loading service?
Code:
[root@sandy andy]# systemd-analyze blame
4598ms udev-settle.service
1611ms fedora-wait-storage.service
Code:
[root@sandy andy]# systemd-analyze
Startup finished in 2024ms (kernel) + 1527ms (initrd) + 11217ms (userspace) = 14770ms
[root@sandy andy]#
[Code]...
I've tried systemctl disable udev-settle.service, but it doesn't work, service loads on every boot.
I set the default os to boot as windows 7 with a timeout of 1 second. I thought that this would be enough time to switch os ubuntu when i need to, but I am unable to. How can i reset the timeout to 3 seconds? I also cannot view the ubuntu partition within windows because of ubuntu's file system.
View 9 Replies View RelatedI have a Fujitsu-Siemens V5535 laptop with a SIS Mirage 3+ graphic card, 671/672 chipset. I put ubuntu 9.10 on it, but I am not even able to settle the screen resolution higher than 800/600 . I tried different sollutions that i have found on the linux forum, but I was not successful.
View 1 Replies View RelatedI have searched the net for guides on GTK/Glade and have learned that I have to install Glade in order to experiment with it. It also appears that it only works for Perl. I would primarily like to use C ,Bash , Pascal or settle for Python if possible. Can anyone offer some general info on this topic?
View 4 Replies View RelatedI installed Ubuntu Netbook Edition 10.10 on my Eee PC 901 (the one that has 2 SSD's). It all went fine, and I ran the update manager straight after install and config. It installed the updates (all 198 of them!) without error. I was prompted to restart, so I did. I got the error "udevadm trigger is not permitted while udev is unconfigured". I found out that this error is well documented, and I followed the guide at [url](apparently it affects all variants, not just UNE).
It went O.K., until I tried the command "sudo chroot /media/newroot". I got the error that "cannot run command '/bind/bash': no such file or directory". What should I do?
I cannot boot into and earlier kernel (problem/current one is 2.6.35-23-generic) I can only fix it via live USB stick.
I'm having a bit of a nightmare with my ubuntu hardy server (using hardware raid 1+0). Following a power cut I get the message "udevadm trigger is not permitted while udev is unconfigured" on boot. Before the power cut the server had been up for ~450 days.
I managed to get access to /boot (which was empty) by using the repair option on the alternate cd and mounting /dev/myserver/root. I've installed the packages linux-headers-server, linux-image-server and linux-server. The various 2.6.24-29 files were installed and update-initramfs was automatically run (I noticed others have used update-initramfs to solve this error when upgrading from 8.04 to 10.04 in some posts I've read). No luck with this though - just the same error booting. I've also tried reinstalling udev, but again with no success.
I rebooted and pressed the Esc key to get the boot menu up. Only options were for kernel 2.6.24-26 (rather than the 2.6.24-29 just installed). I ran the recovery option anyway and got "/dev/mapper/myserver-root does not exist".
I use Parallels 5 for Mac (10.6.4). I started my Ubuntu 10.4 virtual machine and it didn't load the Ubuntu Gnome desktop. In stead I did get a command line prompt. I could login with normal username and password, rebooted again, but same result.I tried to update the system with code...
View 4 Replies View Relatedmy brother's computer is pretty slow, but was working fine with ubuntu karmic, but I decided to finally upgrade him to lucid the other day, and recently his bootups take, at worst, 10 minutes,when in karmic it took way less. It just sits on a blank screen (not even a blinking cursor)
His pc's specs are:
1.4 Ghz processor (single core)
on-board graphics (no graphics card)
two hdd's one 80GB and one 150GB (the 150GB is split into 3 partitions)
465.7MB of ram 4.1GB of swap
I've attached his bootchart and it seems that Modprobe, Framebuffer, udevadm, and blkid are taking the most time to load, but I dont really know, i'm new to linux. Also how do i disable bootchart now that iv'e used it. p.s Heres he same bootchart just in case the one attached gets shrunk by ubuntuforums [URL]..
I just performed an update thru the Update Manager, & on re-boot got this message: ( Ubuntu 10.04.1 LTS, kernel 2.6.32-24-386 ) udevadm trigger is not permitted while udev is unconfigured. Gave up waiting for root device. Common problems :
- Boot args ( cat /proc/cmdline )
- Check root delay= ( did the system wait long enough? )
- Check root= ( did the system wait for the right device? )
- missing modules ( cat /proc/modules; ls /dev )
ALERT! /dev/disk/by-uuid/df0200e3-e6e9-439a-922f-100d92af0c58 does not exist. Dropping to a shell!. BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built in shell (ash) (initramfs)_ Info: I can boot into older version: Ubuntu 10.04.1 LTS, kernel 2.6.32-23-386. The Update Manager does not seem to want to show any updates that are available.
I was updating the security updates in my deskptop. It did not executed successfully even after 7 hours. It remain just like hang up. So I switched off the PC and rebooted. Then it is showing the error: "udevadm trigger is not permitted while udev is unconfigured. Gave up waiting for root device."
Now my Lucid Linx is almost dead. There is also no 'Repair' option while booting from Ubuntu 10.04 CD. Pl help to restore it.
I upgraded to the last ubuntu last week and since I get the error: "udevadm trigger is not permitted while udev is unconfigured."I followed different posts on the forums but none helped: [URL]I did the sequence:
"1. Boot liveCD
2. "sudo fdisk -l" to find your boot disk, in my case it is /dev/sda5.
3. "sudo mkdir /media/newroot"
[code]....
Noticed this on boot up the other day, but it doesn't seem to have a negative effect. Everything appears to be running just fine.
"Triggering udev events: /sbin/udevadm trigger --type=failed"
Is this something that needs to be resolved or ignored?
I seem to be having this problem with Fedora 14:
[URL]
My wireless device is an Intel Ultimate N WiFi Link 5300, driver is iwl4965. Post-suspend I see exactly the same messages as in that Ubuntu report. Restarting NM does not help.Is there a way to lengthen to timeout or kick the device in to life some other way?
I have successfully setup FreeNX on Suse 10.2, Suse 11 (32 and 64 bit), and am now attempting on RHEL 5.4 (32 and 64 bit). For both distributions, the client fails to times out at exactly the same point - downloading the session information. Here are the steps I took to install/configure.
[Code].....
I use NX Server 3.4.0-8 and GNOME desktop and I connect through NXClient 3.4.0-5 on Windows 7 pro 64bit.
I have some problems, first is that I use beesu and through the physical console, it asks me once for my password and then remembers it as long as the passwd timeout is set on sudoers file. But when I connect to my desktop through NX, beesu asks for mypassword all the time not honoring the save timeout setting.
I have a box running Fedora 14 upstairs and I've been trying to get it to run VNC server, unsuccessfully. I've RTFM, and followed the instructions step-by-step, but it still won't run. I'm getting no error messages. But when I try to connect from either a Window or Mac client, it either get a timeout or connection refused. I've read and tried all the troubleshooting; been working on this for about 12 hours now. Is there something major that I could be overlooking?
View 14 Replies View RelatedHow do I configure the screensaver timeout value in terminal?
I am trying to do so without using a GUI method (System --> Preferences --> Screensaver).
I installed fresh installation of F15 and I've allways used Evolution as my mailclient. There was in older Evolution versions option "Mark message as read in X secs" I set that to zero to read emails smoothly, now I have to wait after every message that it's got "as read" and that's really annoying especially if it's automatically sent message from server that I don't really have to "check" it just click it to get it as read. I've been gone thru all the settings of current Evolution in F15 and haven't found anymore that option. Maybe there's conf file somewhere that I can put that? That "Help" page for Evolution is kinda outdated.
View 3 Replies View RelatedI am trying to stream video from my Fedora 12 server to my XBox 360 via uShare 1.1a. I have opened the port I have specified in the ushare.conf file and in verbose mode, uShare sees every video I want to share. The XBox sees the uShare under "Computer", but I get a connection timeout when trying to connect to it. /var/log/messages shows no errors with uShare. I can connect to the uShare web interface without any problems. Most people seem to be using uShare with Ubuntu,
View 4 Replies View Relatednm-applet timeout. I connect to the internet via wifi access. I have this problem that whenever there is a powercut, my wifi router switches off and then nm-applet tries to connect and then after sometime times out i.e. nm-applet gives up on trying to restore the connection.
I want nm-applet to keep trying to restore the connection indefinitely because if the electricity is back lets say after an hour then it should immediately connect without manual intervention.
I did google around trying to search for the configuration parameters but was not able to do so.
I am very new to this and seem to have fallen at the first hurdle configuring ssh...
I believe I have got ssh running (on Fedora 15) as running:
results in a password prompt and successful login
Then to find my ipaddress i ran:
this returns deatils of two adapters... 'lo' and 'p2pl'. I assumed p2pl was the one (although was expecting something like eth0) and took the address to be 'inet addr: 192.168.1.5'.
However, using this from putty on my windows7 machine (locally) results in a fatal network timeout everytime.
I am having issues with putty going inactive during a session and the job failing. I do not want to run nohup but would llike a korn shell script to keep putty alive.
View 1 Replies View RelatedFC11, 2.6.30.9-90.fc11.i586
Code:
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:invalid opcode: 0000 [#1] SMP
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:last sysfs file: /sys/devices/virtual/vc/vcsa2/dev
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:Process kswapd0 (pid: 22, ti=dfa28000 task=dfa20ca0 task.ti=dfa28000)
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:Stack:
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: 00000002 00000001 c117a740 c12f52a0 c103ba20 c103ba60 c103baa0 c110a600
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: c110a640 c110a6e0 c136f800 c10ebc40 c10ebc60 c10ebc80 c114e2e0 c114e260
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:Call Trace:
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048bf17>] ? shrink_list+0x24d/0x4e1
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048893d>] ? get_dirty_limits+0x1f/0x2e1
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c0423803>] ? set_next_entity+0xa0/0x10c
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c0402286>] ? __switch_to+0x78/0xfb
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c042c374>] ? finish_task_switch+0x8d/0xa7
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048c3c1>] ? shrink_zone+0x216/0x289
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048c8dc>] ? kswapd+0x369/0x51b
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048b14e>] ? isolate_pages_global+0x0/0x19b
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c044065d>] ? autoremove_wake_function+0x0/0x34
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c0422947>] ? complete+0x39/0x43
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048c573>] ? kswapd+0x0/0x51b
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048c573>] ? kswapd+0x0/0x51b
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c0440365>] ? kthread+0x4b/0x6f
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c044031a>] ? kthread+0x0/0x6f
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c0403f87>] ? kernel_thread_helper+0x7/0x10
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:Code: f6 43 ea 01 75 24 8b 85 78 ff ff ff f6 40 08 40 0f 84 63 03 00 00 89 f0 e8 88 14 01 00 85 c0 0f 84 2d 03 00 00 bf 01 00 00 00 89 <f0> e8 db f0 ff ff 89 85 7c ff ff ff 8b 46 08 85 c0 78 2b 83 bd
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:EIP: [<c048b90e>] shrink_page_list+0x1b0/0x56c SS:ESP 0068:dfa29d80
The semaphore timeout period has expired.
I am trying to set my root password for my mysql database. After I enter /etc/init.d/mysqld start
[code]...
Timeout error occurred trying to start MySQL Daemon. Then when I try to set the password for my root account I get
[code]...
I'm getting a timeout error from NetworkManager when attempting to connect to my router/firewall.
Excerpt from /var/log/messages attached.
Since I upgrade our cluster from the FC14 to the FC15 I have a bad problem with the tftpd server. I have some thinstations booting over the network after the update the boot failed with the message "TFTP open timeout". I use an "ip alias" (cluster adress) for the tftp server (next-server in the dhcp), when I use the real ip I have no problem. I found some information about a "Service Guard environment" and an option to enable it:
"This option is required for some tftp clients. These clients reject the tftp reply received from a different IP address than the one requested when the server?s interface is configured with an alias IP address." I do not see an option like that in the tftpd server of the FC15.
Using Fedora 14 as a TFTP server. I am neither able to get nor put files on the this server. The error I get is "Timeout occurred." Here is /etc/xinetd.d/tftp:
service tftp
{
disable = no
socket_type = dgram
[Code]....
I have verified the files are in the directory. I have given read/write/execute access for everyone on /home/cisco/ms-sol. On Fedora I have disabled iptables and selinux. On the client (windows xp machine) I also disabled the firewall.
When doing put, for example, I took wireshark capture from the windows PC and I see several "read requests" before connection times out.
I have a web application that runs through thousands of IP addresses and checks if they're online. Basically, if a server uses more than 250ms to respond, it's considered offline in our case. It would be an enormous timesaver if we could get the ping command to give up after about 300 ms, instead of what seems to be the minimum value of the -W parameter, 1 second.
View 2 Replies View Related