Fedora :: Boot Failed With The Message "TFTP Open Timeout"
Sep 7, 2011
Since I upgrade our cluster from the FC14 to the FC15 I have a bad problem with the tftpd server. I have some thinstations booting over the network after the update the boot failed with the message "TFTP open timeout". I use an "ip alias" (cluster adress) for the tftp server (next-server in the dhcp), when I use the real ip I have no problem. I found some information about a "Service Guard environment" and an option to enable it:
"This option is required for some tftp clients. These clients reject the tftp reply received from a different IP address than the one requested when the server?s interface is configured with an alias IP address." I do not see an option like that in the tftpd server of the FC15.
View 3 Replies
ADVERTISEMENT
Mar 15, 2010
When I try to pxe boot a Sun X4100 (which actually has a RHEL OS on it right now) I get the message TFTP open timeout. All traffic is allowed for port 69 udp in both directions. I do get a dhcp address. I see that both on the server and the client it gets an IP. After that I get this message in the logs:
[Code]....
View 1 Replies
View Related
Mar 18, 2011
Using Fedora 14 as a TFTP server. I am neither able to get nor put files on the this server. The error I get is "Timeout occurred." Here is /etc/xinetd.d/tftp:
service tftp
{
disable = no
socket_type = dgram
[Code]....
I have verified the files are in the directory. I have given read/write/execute access for everyone on /home/cisco/ms-sol. On Fedora I have disabled iptables and selinux. On the client (windows xp machine) I also disabled the firewall.
When doing put, for example, I took wireshark capture from the windows PC and I see several "read requests" before connection times out.
View 1 Replies
View Related
Jun 9, 2011
I installed fresh installation of F15 and I've allways used Evolution as my mailclient. There was in older Evolution versions option "Mark message as read in X secs" I set that to zero to read emails smoothly, now I have to wait after every message that it's got "as read" and that's really annoying especially if it's automatically sent message from server that I don't really have to "check" it just click it to get it as read. I've been gone thru all the settings of current Evolution in F15 and haven't found anymore that option. Maybe there's conf file somewhere that I can put that? That "Help" page for Evolution is kinda outdated.
View 3 Replies
View Related
Nov 10, 2010
Im trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies
View Related
Aug 4, 2011
I set the default os to boot as windows 7 with a timeout of 1 second. I thought that this would be enough time to switch os ubuntu when i need to, but I am unable to. How can i reset the timeout to 3 seconds? I also cannot view the ubuntu partition within windows because of ubuntu's file system.
View 9 Replies
View Related
Jan 17, 2010
My Redhat 5.3 desktop running on an AMD 64 system was not receiving the updates from rhn until a few days ago when it started checking in and downloading updates. The updates crashed generating bug reports. I tried running yum-complete-transaction command, it aborted also. I found a knowledge base article with instructions on how to rebuild the rpm database which I followed. After completing the procedure I tried to reboot. The system gets to the logon screen and then I get the message Authentication Failed and the system locks up. The commands I ran are:
rm /var/lib/rpm/__db*
rpm -rebuilddb
yum clean all
I am also seeing a message during boot up that the module libxml2 is missing and when I try to download the package from rhn yum cannot find the server.
View 7 Replies
View Related
Jan 31, 2010
I've got ubuntu 9.10 installed and can access all partitions on my 3 drives except for one. When I try to access this partition I get the following error:
"Unable to mount location Message did not receive reply (timeout by message bus)"
for the record this is a 805mb partition on a 1.5TB drive.
View 6 Replies
View Related
May 24, 2009
I'm getting these messages Over SSH with the -D switch
Code:
At uni I did this for a couple of reasons, primarily to connect to trackers for bittorrent. I would get these messages fairly often but I never thought much of it because I figured I was just loosing packets over the network or something (understandable in my situation). At home I decided to continue to use this method because that computer is set up in DMZ and is very useful. I havn't received many of these messages but recently all my torrents stalled and I had a whole bunch of these messages. Is it possible my computer just cant handle all the network connections (it's a 2ghz AMD running debian)? What exactly do these messages mean? Is there any way to optimize my connection in any way?
View 1 Replies
View Related
May 14, 2010
I've setup DHCP and a DRBL server on my box running Lucid, and everything is working fine except TFTP.TFTP is configured, but when I try to start it with:Quote:service tftpd-hpa startThe following is returned:Quote:
start: Rejected send message, 1 matched rules; type="method_call", sender=":1.96" (uid=1000 pid=24555" comm="start") interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart (uid=0 pid=1 comm="/sbin/init"))
[code]...
View 3 Replies
View Related
Jan 22, 2011
I need to connect to my company through a Cisco VPN. The Cisco client fails to build so I thought of using vpnc. I used Network manager (NetworkManager-vpnc is installed). However after setting everything up and then logging in, I get the 'VPN Connection Failed' message.
View 14 Replies
View Related
Mar 28, 2011
My fedora 14 has OpenSSH_5.5p1, OpenSSL 1.0.0a-fips 1 Jun 2010 running. I am able to use putty to ssh to my fedora. I installed NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.3.0) but when i used nxclient to connect to the server i always got 'session x' failed.
[code]...
View 1 Replies
View Related
Nov 18, 2009
I boot EPC 1000h from usb(Fedora-12-i686-Live). it shows msg at the point about "drm-model-rmfb". ...than it "sleep forever".
View 2 Replies
View Related
Jan 12, 2011
I just having to do a fresh install and get the following message to close after setting up
partitions and on clicking write to disk:
Failed to mount "524M Volume"
Method "Mount" with signature "ssas" on interface
"org.freedesktop.Hal.Device.Volume" doesn't exist.
Only option under message is close button. I'm using Fedora 14 xfce 32bit live CD. The install seems to carry on normally until done but then when I check the partitions I've setup I seem to only have the origonal uneditted default partitions.
View 2 Replies
View Related
Jun 2, 2011
I am using Fedora 12 with HP 1020 Laser Jet. Plugged printer in and installed it. Now it doesn't want to print, it gives me a printer state message: /usr/lib/cups/filter/hpcups failed.
I have tried to reinstall hplip but it is the same.
View 2 Replies
View Related
Nov 22, 2009
I finally did it. I took the plunge and moved away from MS and installed openSuSe on my system. I have a Gateway 650 with 160 MB of ram and yes it did install! To top it all off it also boots to Windows XP. This was all working fine until I < me < myself < yes I am a gonna admit >>USER ERROR<< booted the system into windows and I decided to see if my system needed to be DEFRAGGED. Yup I did.. I ran the defrag on the system and when it was all said and done my NTFS file system was all nice and pretty no more fragmented files.
So I decided to reboot the system to see that wonnerful boot loader of openSuSe and I chose the 11.2 to boot to and I get the message that the previous installation failed and it starts to run the script to "fix" the installation. It hangs on around 4% the installation. I hit ctrl alt del and it boots into the openSuSe partition and it seems to be working, but I have that durn annoying screen of the "previous installation failed". Are there any ideas on how to as my GF 4 yr old daughter says "flix it"? Or do I have to go through the PAINFULLY SLOW installation again?
View 2 Replies
View Related
Jun 5, 2010
I ran Movie Player to play .mov file, but it generate the following error message:
pa_stream_writable_size() failed: Connection terminated
The .mov file is wide screen, I am not sure if that's why the error occurred. By the way, the .mov file is several hundred megabytes and store on DVD.
View 5 Replies
View Related
Mar 26, 2010
I have checked several tutorial sites, to no avail. I can't seem to get Winpe 3.0 to boot over tftpd/pxe.Has anyone successful done this using Ubuntu 9.10?, or am I just wasting my time trying.
View 4 Replies
View Related
Jul 22, 2009
Well this is my first time using redhat 7, the install went fine and webserver, mysql, phpmyadmin are all working......great
The only problem i have is the remote desktop
I have set the password in preferences/remote desktop run command vncpasswd and set password
In services vncserver i get this message......... xsetroot: unable to open display '' Xvnc is stopped and vncserver failed. The error was: xsetroot: unable to open display '' Shutting down VNC server: 1:user1[FAILED]
Starting VNC server: 1:user1 [FAILED]
My vncservers file looks like this
I have tried restarting service using root login and user1
View 5 Replies
View Related
Jul 3, 2009
I'm having trouble connecting to my freenas server.
It's part of my windows network and when I try to connect to it,I get this message: Unable to mount location,Failed to retrieve share list from server.
Is there something I need to enable on the server or my OS(CIFS or something)?
View 1 Replies
View Related
Oct 4, 2009
It's been awhile since I posted anything which is a good sign my install has been working well and I have been able to handle most everything. However, I'm not able to handle this issue. I recently installed F11 and everything went well. But, when trying to see my other computers on the local network, I cannot. I receive this error message: Unable to mount location Failed to receive shared list from server. I understand the message as it is obvious, but do not know how to fix it.
View 14 Replies
View Related
Mar 30, 2011
After tweeking some graphics settings, and replacing some hardware, ubuntu won't boot. Being left in the X session (CTRL + ALT + f7), it's what looks like a log:
[Code]....
^ and that's where it hangs. So I went into ctrl alt f1, and logged in with my user/pass, and did the command: startx the screen flashes, and brings me back to a failed to open devices report.
[Code]....
I tried re-installing GDM, but turns out that the PC isn't actually online, hence unable to install GDM after uninstallation. So I downloaded the gdm .deb, and tried to install it from a USB flash drive, but I get dependency errors. I'm at a loss here, I could really use some help, this is the PC that has all my data on it, 450 GB +, I'd love to not have to transfer that over to a new installation!
View 9 Replies
View Related
Jun 17, 2011
I have installed vnc-server on my CentOS 5.6 virtual machine. I can connect to it with a java web browser so it seems to be working. However, I get the following error message when I start, stop or restart the vnc-server process. Quote: Starting VNC server: 1:ken xauth: timeout in locking authority file /root/.xauthkk661q
View 5 Replies
View Related
Jun 24, 2010
My problem has to do with playing a mov video. It's very strange.
- In mplayer I have audio but not video appears.
- In Movie Player I have video but not audio
- In VLC I have not video and the audio is wrong (a lot of noise).
This is the output when I try to open with mplayer:
MPlayer SVN-r31061-4.4.3 (C) 2000-2010 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing 0101.mov.
libavformat file format detected.
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xac37bd0]max_analyze_duration reached
[lavf] Video stream found, -vid 0
[lavf] Audio stream found, -aid 1
VIDEO: [smc ] 640x480 8bpp 1.000 fps 4.2 kbps ( 0.5 kbyte/s) .....
View 14 Replies
View Related
Mar 30, 2011
I have a single harddisk partitioned with Ubuntu Maverick and Windows 7 installations. I installed Windows first and then Ubuntu, after resizing partitions and adding a new one for Ubuntu. Win7 did not appear in the Grub2 boot menu. I added it (sda3), but on rebooting, I get the message "BOOTMGR is missing/Press Ctrl+Alt_Del to restart".
I understand that Win7 might have put its boot manager in another partition, and sda1 had FAT. I added sda1 as another grub2 entry, but when I try that, I get the error message "Windows Boot Manager/ Windows failed to start. A recent hardware or software change might be the cause... Status 0xc0000225/ Info: The boot selection failed because a required device is inaccessible." Attached are fdisk and parted outputs; and the grub2 files I created. How do I get Windows 7 to boot up?
View 6 Replies
View Related
Sep 7, 2011
I am trying to configure and compile the pam_ldap and nss_ldap for MIPS architecture. for this they need ldap library. so I am trying to compile openldap code for MIPS first, but the configuration is failing.The command and options used for configuration is as follows.
./configure --host=mips CC=/opt/montavista/pro/devkit/mips/fp_be/bin/mips_fp_be-gcc LD=/opt/montavista/pro/devkit/mips/fp_be/bin/mips_fp_be-ld CFLAGS="-g -O2 -I/usr/include -I/usr/include/openssl" LDFLAGS="-L/usr/lib" --prefix=/mips/ldap --with-yielding_select=no
[code]...
View 1 Replies
View Related
Aug 4, 2011
System: F15-64bit, Intel Core i7 on Asus P6T mobo. I've upgraded to 2.6.40, and I'm regretting it!While 2.6.38 still works fine (apart from the usual random panics), 2.6.40 gives errors on boot, and reliably panics soon after login. Early in the boot I get the message "IOMMU: mapping reserved region failed" 8 times. Then boot appears to proceed as normal, at least once the nvidia blob is removed in favour of Nouveau (otherwise, forget it...).
After graphical login, the system freezes within a couple of minutes.After a text login, the system freezes within seconds with a panic, starting "BUG: Scheduling while atomic: swapper". A forum search for the IOMMU message leads to https://fedoraproject.org/wiki/Commo...IOMMU_handling but this talks about old 32-bit releases without BIOS virtualization support.
[Code]...
View 5 Replies
View Related
Feb 20, 2010
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies
View Related
Feb 1, 2011
On compiling open-vm-tools-8.4.2-261024 on Fedora 13 x86_64. When I run make, it failed on stage 2 with these error messages:
I think I have to compile these modules into the kernel.
View 1 Replies
View Related
Jan 28, 2011
When I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies
View Related
