Ubuntu Installation :: Crashed - Error - Udevadm Trigger Is Not Permitted While Udev Is Unconfigured
Oct 2, 2010
I was updating the security updates in my deskptop. It did not executed successfully even after 7 hours. It remain just like hang up. So I switched off the PC and rebooted. Then it is showing the error: "udevadm trigger is not permitted while udev is unconfigured. Gave up waiting for root device."
Now my Lucid Linx is almost dead. There is also no 'Repair' option while booting from Ubuntu 10.04 CD. Pl help to restore it.
View 2 Replies
ADVERTISEMENT
Sep 2, 2010
I use Parallels 5 for Mac (10.6.4). I started my Ubuntu 10.4 virtual machine and it didn't load the Ubuntu Gnome desktop. In stead I did get a command line prompt. I could login with normal username and password, rebooted again, but same result.I tried to update the system with code...
View 4 Replies
View Related
Sep 7, 2010
I just performed an update thru the Update Manager, & on re-boot got this message: ( Ubuntu 10.04.1 LTS, kernel 2.6.32-24-386 ) udevadm trigger is not permitted while udev is unconfigured. Gave up waiting for root device. Common problems :
- Boot args ( cat /proc/cmdline )
- Check root delay= ( did the system wait long enough? )
- Check root= ( did the system wait for the right device? )
- missing modules ( cat /proc/modules; ls /dev )
ALERT! /dev/disk/by-uuid/df0200e3-e6e9-439a-922f-100d92af0c58 does not exist. Dropping to a shell!. BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built in shell (ash) (initramfs)_ Info: I can boot into older version: Ubuntu 10.04.1 LTS, kernel 2.6.32-23-386. The Update Manager does not seem to want to show any updates that are available.
View 3 Replies
View Related
Aug 27, 2011
I'm having a bit of a nightmare with my ubuntu hardy server (using hardware raid 1+0). Following a power cut I get the message "udevadm trigger is not permitted while udev is unconfigured" on boot. Before the power cut the server had been up for ~450 days.
I managed to get access to /boot (which was empty) by using the repair option on the alternate cd and mounting /dev/myserver/root. I've installed the packages linux-headers-server, linux-image-server and linux-server. The various 2.6.24-29 files were installed and update-initramfs was automatically run (I noticed others have used update-initramfs to solve this error when upgrading from 8.04 to 10.04 in some posts I've read). No luck with this though - just the same error booting. I've also tried reinstalling udev, but again with no success.
I rebooted and pressed the Esc key to get the boot menu up. Only options were for kernel 2.6.24-26 (rather than the 2.6.24-29 just installed). I ran the recovery option anyway and got "/dev/mapper/myserver-root does not exist".
View 1 Replies
View Related
Dec 19, 2010
I upgraded to the last ubuntu last week and since I get the error: "udevadm trigger is not permitted while udev is unconfigured."I followed different posts on the forums but none helped: [URL]I did the sequence:
"1. Boot liveCD
2. "sudo fdisk -l" to find your boot disk, in my case it is /dev/sda5.
3. "sudo mkdir /media/newroot"
[code]....
View 1 Replies
View Related
Mar 6, 2010
when I update the ubuntu, I set it shutdown after 60 minutes uisng "sudo shutdown 60",because I think the update will complete in 40 minute. However today when I start the computer, it can not startup the ubuntu. I got a screen which sown the message in the title,after I search it using google, some people have encounted this proble, their solve way is to use a live cd to chroot to the old root and complete the update.
However I can not. The following is my suitation:
http://imagebin.org/87841 my command
http://imagebin.org/87840 my partition
View 2 Replies
View Related
Mar 14, 2010
Noticed this on boot up the other day, but it doesn't seem to have a negative effect. Everything appears to be running just fine.
"Triggering udev events: /sbin/udevadm trigger --type=failed"
Is this something that needs to be resolved or ignored?
View 7 Replies
View Related
Nov 22, 2009
Fedora 12 randomly crashes after a fresh install.Everything is left at its default during the installation except I install KDE and not Gnome.When I try to boot I hit esc at the splash screen to see where it hangs, but it never hangs at the same spot twice. Sometimes it hangs and sometimes it restarts. Its crashed everywhere from starting udev to the login screen.
I've been using kubuntu for the past year because I have the same problem with F10 and F11.
I dual boot with Windows 7 for games.
System specs:
Motherboard: MSI P45 Platinum
Processor: Intel Core 2 Duo E8500
Video Card: Radeon HD4850
Memory: 4GB (2x2GB) Patriot
HDD: Main: 250GB SATA Western Digital
code....
View 5 Replies
View Related
May 1, 2011
i see this error in system.log
May 1 03:15:01 master cp: error processing extended attributes: Operation not permitted
May 1 03:15:02 master cp: error processing extended attributes: Operation not permitted
May 1 03:15:02 master 700.daily.server.cyrus: Error: /etc/MailServicesOther.plist postfix does not contain a dictionary with key log_rolling_days.
[Code]...
View 1 Replies
View Related
Jun 26, 2011
I am trying to install ubuntu 11.04 to my laptop, currently I have 10.10 installed and working. When I try to boot the computer from USB for installation, I get (after waiting a few minutes):
[Code]...
I am currently using windows 7 and ubuntu as dual boot. I didnt have this problem when I was installing 10.10. I am not sure but I think I upgraded my BIOS after my 10.10 installation, so that might be related. I didnt change anything else related to hardware since.
I am not sure what other information I should provide, Also note that given error message might not be 100% correct as I have typed it from a photo.
View 2 Replies
View Related
Aug 30, 2011
I tried doing a fresh install of F15 today on my computer, and I have a problem. When I try to install to hard drive, I get as far as choosing storage, then it examines storage devices and closes. I get an error that says a package has crashed. (I would post it up, but its not notifying me anymore)
View 2 Replies
View Related
Dec 20, 2010
I installed Ubuntu Netbook Edition 10.10 on my Eee PC 901 (the one that has 2 SSD's). It all went fine, and I ran the update manager straight after install and config. It installed the updates (all 198 of them!) without error. I was prompted to restart, so I did. I got the error "udevadm trigger is not permitted while udev is unconfigured". I found out that this error is well documented, and I followed the guide at [url](apparently it affects all variants, not just UNE).
It went O.K., until I tried the command "sudo chroot /media/newroot". I got the error that "cannot run command '/bind/bash': no such file or directory". What should I do?
I cannot boot into and earlier kernel (problem/current one is 2.6.35-23-generic) I can only fix it via live USB stick.
View 7 Replies
View Related
Oct 12, 2009
i think IM-settings is dead. i cannot get ibus or scim work.IM-Settings-Daemon[6769]: CRITICAL **: Giving up to bring the process up because Main Input Method process for ibus rapidly died many times. See .imsettings.log for more details.i have re-installed butProblem has been solved...re-install or update gtk2/glib2 and remove imsettings scim ibus im-chooser etc, everything.re-install imsettings ibus and im-chooser...thats it! i found sometimes the binary is not as good as source....
View 4 Replies
View Related
Oct 14, 2010
Recently I configured sendmail configuration in Linux dedicated server purchased in godaddy. os version is centos5.4. as the configuration i can able to send mail to other domain like gmail and yahoo. thats working fine. but my problem is i can't able to receive any mails. i got like this error. 550 relay not permitted or addess rejected.
View 8 Replies
View Related
Apr 18, 2011
I am trying to create a jailed shell for a user Don($UID '500') using my own method(I don't want to use any ready-made "jailkit"). The user don should get a home directory /jail/don instead of /home/don when he login via SSH (So that he will not able to see any other files/directories on the system)
This is what I have done.
Quote:
Code:
It works without any issue ....Home directory changes to /jail/don when I ssh to the system as user don. ie: #ssh don@192.168.0.66
Then I added a chroot command to this code.
Code:
Unfortunately , now I am getting an error message saying that "chroot: cannot change root directory to /jail: Operation not permitted" .. I am not sure how to rectify this error... Is my approach correct to get a jailed shell using /etc/profile file ?
View 8 Replies
View Related
Jun 1, 2011
I have a laptop set up for dual-boot with Ubuntu and Win7. I also have a shared partition which I mounted as the /home directory in Ubuntu. The problem occurred as I was upgrading Ubuntu from 10.10 to 11.04. In the middle of the install, my computer froze for some reason and ultimately I had to shut the computer off and restart. When I restarted the linux would freeze half-way through boot-up with a message saying that the drive was mounted. Before the message saying the drive is not mounted it gave the following error: Can not read 'etc/udev_rule.d/z80_user.rules'
When I boot up Win7 it is unable to mount the shared partition and says that the drive is not formatted. I am also unable to run the ubuntu recovery option from GRUB. It asks me to give the "root password for maintenance," but it won't accept my root password. Would the upgrade have wiped my partition??? Or am I just locked out somehow because it was in the process of changing config files?
View 6 Replies
View Related
Nov 20, 2010
After running 9.04 for a year, I upgraded from 9.04 to 9.10 and then to 10.04 using Update Manager. My Dell computer crashed several times during the upgrade to 10.04. I restarted each time from a recovery version of 10.04, and eventually the upgrade was completed. As far as I can tell after a few days, everything I normally use seems to be working. However, when I add a package with Synaptic I get the error message below. Is the message significant? Do I need to address each error?
[Code]....
View 6 Replies
View Related
Feb 20, 2010
I updated my lucid alpha testing (64 bit)install after which I am unable to boot into any of my Ubuntu installs(sda11 has a dedicated Burg partition and sda10 has the stable karmic (32 bit)install and sda9 has the testing lucid install) Now I am trying to recover (rewrite Burg or at least grub2 on the MBR) my installs
This is what happens
custom@custom:~$ sudo mount /dev/sda10 /mnt
custom@custom:~$ sudo mount -o bind /dev /mnt/dev
custom@custom:~$ chroot/mnt
[code]....
i tried a slightly different code with little success
custom@custom:~$ sudo mount /dev/sda10 /mnt
mount: /dev/sda10 already mounted or /mnt busy
mount: according to mtab, /dev/sda10 is already mounted on /mnt
[code]....
I also ran a whereis for bash and it also is there
View 9 Replies
View Related
May 3, 2010
I am setting up iSCSI on Oracle Enterprise Linux.
After configuring the iscsi service, the symbolic link iscsi under the /dev folder is not created when the iscsi service is started.
Created the following UNIX shell script /etc/udev/scripts/iscsidev.sh on iscsi client node:
..............................................
#!/bin/sh
# FILE: /etc/udev/scripts/iscsidev.sh
[Code]....
View 8 Replies
View Related
Aug 2, 2010
I am developing a java application that deals with the parallel port I used the parport library, I have the following problem: I am using netbeans 6.9 and linux redhat, when I run the code (java code that controls parallel port) from netbeans I get: "ioperm error: Operation not permitted" I used the "clean and build" function in Netbeans to create the jar file (test.jar) then I changed the permission of the test.jar to root using this command "chmod 4777 test.jar" and the test.jar file worked just fine as a stand alone file, but I still get the same error message when I try to run the program from Netbeans
View 1 Replies
View Related
Dec 22, 2010
I'm having problems with Dogtag Certificate System, i have installed a CA Root on another machine and create a Security Domain, and now I'm installing this CA which is supposed to be subordinated to it. After creating the PKI i can access the configuration web page, but when i get to the Security Domain section, i choose "Join Security Domain", enter the url and get this error:
org.xml.sax.SAXParseException: The string "--" is not permitted within comments.
View 6 Replies
View Related
Oct 6, 2010
I am trying to install a third party driver and the provided makefile makes a call to insmod. Whenever I try to install this I run "su", so I am root and should have permissions. However, when I run "make install" I get the following output:
Code:
# make install
Unloading any instances of foo module
Loading new foo into running kernel
insmod: error inserting 'foo.ko': -1 Operation not permitted
make: *** [install] Error 1
Like I said before, I'm doing this as root, so I don't see how this is possible. Additionally, every time I try to do this it seems to cause a lot of damage to whatever kernel I'm currently booted in; USB and ethernet (and hence the Internet) stop working and I have to wipe the kernel and reinstall it.
View 10 Replies
View Related
Dec 12, 2010
I'm running CentOS 5.3 in an openVZ container, and I'm receiving "operation not permitted" errors from Nmap.
Note: Host seems down. If it is really up, but blocking our ping probes, try -PN Nmap done: 1 IP address (0 hosts up) scanned in 3.15 seconds
I have no iptables rules set.
How can I get this working?
View 1 Replies
View Related
May 29, 2010
on bootime the system hangs till pressed <alt><esc> a couple of times. The splash image is shown and the bright spot nearly full. The network and disk led's are off. System is hanging.After <alt><esc> ing a couple of times the leds blink,, the system comes up and the gnome login screen appears. The same behaviour ( exept of the gnome login screen )if starting with runlevel 3.Press 'I' to enter interactive startup.udev starten: %G[60G[[0;32m OK [0;39m] Is it possible that the udev error is responsible for the stattup - hang?
View 6 Replies
View Related
Apr 10, 2010
I Installed Ubuntu 9.10 yesterday on a new machine. I started the update manager before I went to bed, (over 300mb's of updates) This morning the computer was unresponsive to get the monitor to come out of sleep. Was forced to power down. I imagine it was at a point of configuring one of the first updates. Now when I try to boot this is what I get......
udevadm trigger is not permitted while udev is unconfigured.
udevadm settle is not permitted while udev is unconfigured.
svgalib: cannot open /dev/mem.
how to go about configuring?
View 2 Replies
View Related
May 24, 2010
When I plug in my camera via usb I see this error
Code:
load-modules.sh: 'usb:v22B8p2B44d0001dcFFdscFFdp00icFFiscFFipFF' is not a valid module or alias name
This is happening on multiple machines. My udev version is 153. I don't think this is a permissioning issue because I've tried playing around with the udev rules/
View 5 Replies
View Related
May 26, 2011
I am on 11.04. Firefox suddenly stopped working after reboot. I get the error message as shown in the enclosed screen shot. Have gone in to Synaptic Package Manager to remove FF and reinstall, but I still get the same messages.
View 4 Replies
View Related
Aug 18, 2010
I tried to install OpenSuse 11.3 on my brand new pc, which already had Windows 7 proffessional in it, and I went step by step through the installation without changing anything. It didn't work. I tried for a second time and this error message kept popping up: "Creating device modes with udev 2.0436224] [drm: i915_diver_load]*ERROR*Detected broken BIOS with 262140/2644kb of video memory stolen. 2.0436224] [drm: i915_diver_load]*ERROR*Disabling GEM(try reducing stolen memory or updating the BIOS to fix)"
And then a lot of letters and numbers wich make no sense to me. Now the only way I can initiate OpenSuse is with the OSuse boot dvd and on failsafe mode.
View 5 Replies
View Related
Apr 28, 2011
So, I recently installed, or.. ermm.. Tried to install Ubuntu 11.04, I did it with a CD. This is about my 4th time around with Ubuntu, so I'm not completely new to it. But, I used to have Windows 7 on here, and I decided I wanted to go with Ubuntu, so I downloaded and burned the CD, and did all the stuff you need to do to install Ubuntu. I got far into the installation, and then the installer crashed saying something about an Input/Output error, and it could be the CD being dirty or damaged.
Now, I'm stuck with a broken operating system because I chose to replace my Windows 7 partion with Ubuntu, and there's no terminal! Everything else seems to be here, it's just really buggy, and I can't get much of anything installed.
View 9 Replies
View Related
Jun 21, 2011
I am using Ubuntu after a BSOD error. Ubuntu is awesome, I can access all my windows files, however, I need to access my programs on windows. Here's what happened- I accidentally changed permissions after getting a virus. I then tried to do a system restore and during that process the computer crashed. When I try to boot to windows in every possible mode, I am always left with the dreaded blue screen of death.
View 3 Replies
View Related
