I seem to be having this problem with Fedora 14:
[URL]
My wireless device is an Intel Ultimate N WiFi Link 5300, driver is iwl4965. Post-suspend I see exactly the same messages as in that Ubuntu report. Restarting NM does not help.Is there a way to lengthen to timeout or kick the device in to life some other way?
I'm getting a timeout error from NetworkManager when attempting to connect to my router/firewall.
Excerpt from /var/log/messages attached.
I set the default os to boot as windows 7 with a timeout of 1 second. I thought that this would be enough time to switch os ubuntu when i need to, but I am unable to. How can i reset the timeout to 3 seconds? I also cannot view the ubuntu partition within windows because of ubuntu's file system.
View 9 Replies View RelatedMy wireless seems to be fast for a good 30secs then bang takes good while to load the next page almost as if it's disconnecting and then reconnecting/scanning reconnecting. Why cant it stay connected. I have WAP PSK security here is my network setting please let me know if I should change any of them:(side not is there a way to fix this problem occuring so frequently it says on the wiki that it should only occur once in a whilce https:[url].....
View 2 Replies View RelatedProblem occured yesterday and has added 3 mins to my boot time. all i can say about it is that it occured after a yum update and then a crash while using wine. i navigated to the file but really cant say much about it. however the pci call there makes me wonder if it is related to the post below.
Starting udev:
Wait timeout. Will continue in the background.
I have successfully setup FreeNX on Suse 10.2, Suse 11 (32 and 64 bit), and am now attempting on RHEL 5.4 (32 and 64 bit). For both distributions, the client fails to times out at exactly the same point - downloading the session information. Here are the steps I took to install/configure.
[Code].....
my audio and the audio while video is playing way to fast ive searched google for a fix and have tried a few. but to no avail.
View 12 Replies View RelatedInstalling 11.2 from KDE LiveCD on an IBM ThinkCenter with 3.2Gb CPU and 1Gb RAM. Ubuntu 9.04 on first two partitions. I go through the configuration, click to 'install': Install display bars remain blank. After 2-3 minutes, black screen with scroll of attempted installation pieces and the error message: "Respawning too fast. Disabled for 5 min." Freeze.
Other posts mention problem with init. But this is happening with the install so not able to address that. No apparent md5chksum for LiveCDs. No mention of this problem in installation help guide. Does anyone know how to deal with this? If you need more info, I will provide. Though it seems this is not an unusual problem when booting an installed system, there's no mention of it happening during installation.
I use NX Server 3.4.0-8 and GNOME desktop and I connect through NXClient 3.4.0-5 on Windows 7 pro 64bit.
I have some problems, first is that I use beesu and through the physical console, it asks me once for my password and then remembers it as long as the passwd timeout is set on sudoers file. But when I connect to my desktop through NX, beesu asks for mypassword all the time not honoring the save timeout setting.
I have a box running Fedora 14 upstairs and I've been trying to get it to run VNC server, unsuccessfully. I've RTFM, and followed the instructions step-by-step, but it still won't run. I'm getting no error messages. But when I try to connect from either a Window or Mac client, it either get a timeout or connection refused. I've read and tried all the troubleshooting; been working on this for about 12 hours now. Is there something major that I could be overlooking?
View 14 Replies View RelatedHow do I configure the screensaver timeout value in terminal?
I am trying to do so without using a GUI method (System --> Preferences --> Screensaver).
I installed fresh installation of F15 and I've allways used Evolution as my mailclient. There was in older Evolution versions option "Mark message as read in X secs" I set that to zero to read emails smoothly, now I have to wait after every message that it's got "as read" and that's really annoying especially if it's automatically sent message from server that I don't really have to "check" it just click it to get it as read. I've been gone thru all the settings of current Evolution in F15 and haven't found anymore that option. Maybe there's conf file somewhere that I can put that? That "Help" page for Evolution is kinda outdated.
View 3 Replies View RelatedI am trying to stream video from my Fedora 12 server to my XBox 360 via uShare 1.1a. I have opened the port I have specified in the ushare.conf file and in verbose mode, uShare sees every video I want to share. The XBox sees the uShare under "Computer", but I get a connection timeout when trying to connect to it. /var/log/messages shows no errors with uShare. I can connect to the uShare web interface without any problems. Most people seem to be using uShare with Ubuntu,
View 4 Replies View RelatedI have had F11 installed for over a week. When I play a video or a sound file it plays fast. All the audio is whinny and voices are high like its playing to fast. If i match the time it does play about 6 seconds fast.
View 3 Replies View RelatedThis is possibly the so-manieth sound issue, but I couldn't find a solution just yet. I run F11 64bit, and have installed all codecs with Autoten. Now I run into the problem that at random intervals, music I play suddenly starts fast-forwarding (so playing at 5 times the speed). It starts fine, and then suddenly, after a couple of minutes, it goes weird. I haven't discovered any other symptoms yet.
View 4 Replies View RelatedI recently installed Fedora 12 on a new gigabyte mb and for unknown reasons to me videos from ..... and others run very fast (5X) or more, and I'm also unable to get audio to work. All this only happens if I'm using KDE, all work ok in GNOME.
View 13 Replies View RelatedFirst answer this: Do you have a video card with an HDMI port on it? If you aren't sure you can look for this: (FWI its close to the same size as a VGA port) If you answered yes, follow these steps and hopefully it will solve the ..... Flash issue. (Fedora 14 KDE instructions)
Kicker Menu > Computer > System Settings > Multimedia
Select "Phonon" on the left. With Phonon selected, click on "Audio Output" at the top and notice the right box fills with all your audio devices listed in order of which device is default starting from the top. Notice the "(HDMI)" next to one of them lol? Simply click the HDMI device and then click "Defer" a few times. This should solve your Flash problems permanently. he reason why this happens is HDMI is both video AND audio. If both are being processed through a video card, theres nothing slowing it down for normal playback.
I use many distros with Amsn or Emesene with both and in all distros slow file transfer speed. There Any knows a client with acceptable transfer speed?
View 2 Replies View RelatedWhen I used windows, I used to perform following operations on regular basis:
1) disk cleanup
2) disk defragmentation
3) virus/spyware/malware check
4) deleting temp files left by deleted files
5) and many more.......
Does Linux system needs that to be done too? What should be done to maintain Linux in fast & furious condition....as it is now.....
nm-applet timeout. I connect to the internet via wifi access. I have this problem that whenever there is a powercut, my wifi router switches off and then nm-applet tries to connect and then after sometime times out i.e. nm-applet gives up on trying to restore the connection.
I want nm-applet to keep trying to restore the connection indefinitely because if the electricity is back lets say after an hour then it should immediately connect without manual intervention.
I did google around trying to search for the configuration parameters but was not able to do so.
I am very new to this and seem to have fallen at the first hurdle configuring ssh...
I believe I have got ssh running (on Fedora 15) as running:
results in a password prompt and successful login
Then to find my ipaddress i ran:
this returns deatils of two adapters... 'lo' and 'p2pl'. I assumed p2pl was the one (although was expecting something like eth0) and took the address to be 'inet addr: 192.168.1.5'.
However, using this from putty on my windows7 machine (locally) results in a fatal network timeout everytime.
I am having issues with putty going inactive during a session and the job failing. I do not want to run nohup but would llike a korn shell script to keep putty alive.
View 1 Replies View Relatedyesterday i upgraded to f13 and it works perfect with preupgrade but now my mouse-scroll are very fast. under the mouse-settings in gnome i fund no option to lower the speed. where can i lower the scroll-speed?
View 1 Replies View RelatedI can play mp3, ..... etc. fine on gnome. However on kde, they always play at 3x or 4x speed. In fact, they just run through, not producing any sound. I can see the video zipping past on ...... Is there a setting for this on kde, that needs to be fixed?
View 2 Replies View RelatedI'm in trouble with playbacks (video and audio, desktop apps and live streams on Firefox). They are all running at least at double speed.
[URL]
Running Fedora 13 - 64 bits - cpu AMD Phenom II X2 955 (dual core) flat, no overclocking, no hacking of any kind. I've tried a re-install of all media codecs and plugins. The problem persists since fresh install of Fedora.
Since kernel update 2.6.40 Totem plays video like in Fast Forward (no sound). Reverting to 2.6.38 solves the problem.
View 3 Replies View RelatedI am installing Fedora 12 on a VIA pico ITX and am running into some issues.
I had the same board but with an PATA/IDE drive, and on that it installed just fine. I needed a bigger/better drive so I did get an SATA drive for it.
After the install it either freezes/hangs when the post install begins or IF the post install works (when I use ide=nodma) it won't boot. I do get to see the grub screen (if I change the timeout in grub.conf) but as soon as the kernel starts loading it freezes. and I see a black screen with a prett fast blinking cursor.
With the live cd, if I try to boot: it reports, no root available going to sleep.
just upgraded fc12 -> fc13 with preupgrade. all seems well except for network manager icon missing from the systemtray and therefor unable to connect to wifi. uninstalled network manager and reinstaled but to no avail. wifi is a bcm4318 airforce one btw, broadcom kernel stuff is loaded but maybe in fc13 its supported in the kernel now?
View 4 Replies View RelatedFC11, 2.6.30.9-90.fc11.i586
Code:
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:invalid opcode: 0000 [#1] SMP
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:last sysfs file: /sys/devices/virtual/vc/vcsa2/dev
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:Process kswapd0 (pid: 22, ti=dfa28000 task=dfa20ca0 task.ti=dfa28000)
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:Stack:
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: 00000002 00000001 c117a740 c12f52a0 c103ba20 c103ba60 c103baa0 c110a600
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: c110a640 c110a6e0 c136f800 c10ebc40 c10ebc60 c10ebc80 c114e2e0 c114e260
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:Call Trace:
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048bf17>] ? shrink_list+0x24d/0x4e1
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048893d>] ? get_dirty_limits+0x1f/0x2e1
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c0423803>] ? set_next_entity+0xa0/0x10c
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c0402286>] ? __switch_to+0x78/0xfb
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c042c374>] ? finish_task_switch+0x8d/0xa7
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048c3c1>] ? shrink_zone+0x216/0x289
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048c8dc>] ? kswapd+0x369/0x51b
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048b14e>] ? isolate_pages_global+0x0/0x19b
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c044065d>] ? autoremove_wake_function+0x0/0x34
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c0422947>] ? complete+0x39/0x43
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048c573>] ? kswapd+0x0/0x51b
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048c573>] ? kswapd+0x0/0x51b
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c0440365>] ? kthread+0x4b/0x6f
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c044031a>] ? kthread+0x0/0x6f
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c0403f87>] ? kernel_thread_helper+0x7/0x10
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:Code: f6 43 ea 01 75 24 8b 85 78 ff ff ff f6 40 08 40 0f 84 63 03 00 00 89 f0 e8 88 14 01 00 85 c0 0f 84 2d 03 00 00 bf 01 00 00 00 89 <f0> e8 db f0 ff ff 89 85 7c ff ff ff 8b 46 08 85 c0 78 2b 83 bd
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:EIP: [<c048b90e>] shrink_page_list+0x1b0/0x56c SS:ESP 0068:dfa29d80
The semaphore timeout period has expired.
I have no problems seeing the networks available and connecting to a network in KDE. But there is no network manager in GNOME. I might have messed up with the settings earlier. What I can do though is run knetwork manager every time I start up (or add it to start up programs). But that opens up the KDE wallet which would rather avoid.I am thinking I need to install something related to NetowrkManager.
View 2 Replies View Related