Fedora :: Troubleshoot Slow Udev-settle Service?
Jun 14, 2011
F15_x64, upgraded from F14 on Sandy Bridge. Any idea how to troubleshoot this slow loading service?
Code:
[root@sandy andy]# systemd-analyze blame
4598ms udev-settle.service
1611ms fedora-wait-storage.service
Code:
[root@sandy andy]# systemd-analyze
Startup finished in 2024ms (kernel) + 1527ms (initrd) + 11217ms (userspace) = 14770ms
[root@sandy andy]#
[Code]...
I've tried systemctl disable udev-settle.service, but it doesn't work, service loads on every boot.
View 2 Replies
ADVERTISEMENT
Jan 11, 2010
My Kubuntu installation (9.10) boots up normally and seems to run fine, other than it is very slow to respond to inputs or change screens/ applications etc. It can take 5-10 seconds to respond to simple requests like changing from firefox to dolphin by clicking in the taskbar. It is dual boot with XP, which also seems sluggish, but is bearable.
The computer is barely useable in Kubuntu because of the slow response. I had 9.04 installed before, same problem. I tried searching for drivers for the on board video, thinking that might be it, but came up empty.
[Code]...
View 6 Replies
View Related
Apr 1, 2011
A couple of days ago my internet connections suddenly became very slow/intermittant.
I thought the problem was at my DSL provider but after more checking the problem seems to be in Ubuntu/Linux somewhere.
Reason: I can dual boot with windows 7 and have no ptoblem at all. Also I tried a Ubuntu laptop on the same router ethernet port and it also works fine. So its not my hardware or my provider, and its not a general Ubuntu problem either.
There are no error messages in any of the /var/log files and ifconfig looks normal.
It seems to be a DNS problem as it's the initial connection to a host which often times out. If I get a connection, I can e.g. stream an radio station fine.
If I try to e.g. traceroute any host it times out (no reply).
Ubuntu 10.10 is totally up to date as of today.
I'm stuck! How can I troubleshoot this to find the cause?
View 9 Replies
View Related
Jan 24, 2010
I have just bought a DVB-T usb dongle to watch some TV. The software I'm using is vdr, which has to be started through the /etc/init.d/vdr service. I have created a udev script that executes the service on device insertion. It works nicely, however now when I boot up the computer it takes ages to get to desktop. I believe it is because of the WAIT_FOR part. But without this part, the service starts too soon because the usb dongle has been inserted but the firmware has not finished loading. Can someone point out an alternative way to do it? The script is here [URL].
View 4 Replies
View Related
Jan 24, 2010
Problem occured yesterday and has added 3 mins to my boot time. all i can say about it is that it occured after a yum update and then a crash while using wine. i navigated to the file but really cant say much about it. however the pci call there makes me wonder if it is related to the post below.
Starting udev:
Wait timeout. Will continue in the background.
View 2 Replies
View Related
Nov 6, 2010
my ubuntu wait about 25 seconds on bootdmesg:
Code:
[ 0.815389] udev[90]: starting version 163
[ 0.904058] sky2: driver version 1.28
[code]....
View 8 Replies
View Related
Oct 6, 2010
The nfs-client service isn't starting after boot up. This is causing problems with the user as they cannot access the remote folders on the server. The PC is a Thinkpad X60s with oS11.3 and KDE4.4.4. The problem started about a week ago after some updates (new kernel update, kde4 updates and some system files) were applied on the laptop.
After logging in none of the remote folders are available. Checking the nfs-client service under Yast>System Services (Runlevel) shows the nfs-client service is not running. If I enable and start the service I get the pop-up confirming the service has started but still cannot access the remote folders even after issuing a mount -a. Opening Dolphin just opens a blank grey window which needs to be terminated.
Trying to restart the nfs service using su -c 'rcnfs restart' sticks at Starting NFS client services: sm-notify Just leaving the PC for 10-15mins eventually sorts itself out and the remote folders become visible. I cannot see anything obvious in the logs so am a bit stumped.
View 7 Replies
View Related
Feb 7, 2011
I was trying to connect to my machine over the internet through a VPN. I was able to connect, with a fairly high ping (30-40 ms), then when I use Terminal Service Client to connect, just the login screen takes FOREVER!! Using a Virtualbox WinXP, I connect to the VPN and use its Remote Desktop and it is super fast.
View 9 Replies
View Related
Aug 9, 2009
I recently installed F11 only to find my soundcard wasn't supported (Asus Xonar Essence STX). I read around a bit and saw that kernel 2.6.30 supported it, so I upped the kernel to 2.6.34
So I configured/compiled my kernel, restarted and it showed up fine in the boot loader. Only problem I have is when I go to login through the login prompt, it acts like it is going to login only to get kicked back out to the login prompt again. I tried to login through the terminal view.... everything checks out there.
I am fairly new to linux in general so I have no idea how to troubleshoot this. I tried finding an error in it but I couldn't find anything.
View 14 Replies
View Related
Feb 28, 2010
i can smb in centos 5 and i run service smb restart, it shows :smb: unrecognized service..... i run rpm -qa |grep samba,it shows
samba-common-3.0.33-3.7.el5
samba-client-3.0.33-3.7.el5
.....
View 2 Replies
View Related
Jun 26, 2011
I am trying to install ubuntu 11.04 to my laptop, currently I have 10.10 installed and working. When I try to boot the computer from USB for installation, I get (after waiting a few minutes):
[Code]...
I am currently using windows 7 and ubuntu as dual boot. I didnt have this problem when I was installing 10.10. I am not sure but I think I upgraded my BIOS after my 10.10 installation, so that might be related. I didnt change anything else related to hardware since.
I am not sure what other information I should provide, Also note that given error message might not be 100% correct as I have typed it from a photo.
View 2 Replies
View Related
Nov 6, 2010
I need to start a service before network service How to?
View 1 Replies
View Related
Feb 4, 2010
I have a Fujitsu-Siemens V5535 laptop with a SIS Mirage 3+ graphic card, 671/672 chipset. I put ubuntu 9.10 on it, but I am not even able to settle the screen resolution higher than 800/600 . I tried different sollutions that i have found on the linux forum, but I was not successful.
View 1 Replies
View Related
Dec 17, 2010
I have searched the net for guides on GTK/Glade and have learned that I have to install Glade in order to experiment with it. It also appears that it only works for Perl. I would primarily like to use C ,Bash , Pascal or settle for Python if possible. Can anyone offer some general info on this topic?
View 4 Replies
View Related
Dec 3, 2009
I did a yum upgrade from Fedora 11 to Fedora 12. I can still use the Fedora 11 kernel just fine. When I try to boot with the Fedora 12 kernel, it failed during udev with "Kernel Panic. Not syncing. Out of memory and no killable processes."
I have no clue how to troubleshoot this problem since I cannot get the Fedora 12 kernel to any usable state. I've removed the kernel and reinstalled it multiple times. I've installed random firmware packages suggested throughout the web. I've tried to boot to console-only. Everything I do produces the same result - a kernel panic. Is there any magic trick to make the kernel stop panicking and actually boot up?
View 4 Replies
View Related
Mar 26, 2010
I am running the Nvidia driver. My system freezes randomly. I've had to reboot my system over 5 times today alone. When it freezes, everything is frozen, even the second hand on the analogue clock. One more issue, and I'm not sure if it's related, my stupid screen goes black after 5 minutes of no typing or mouse movement. This never happended when I first installed it. The issue just started within the last 3 weeks. Kpackage Kit is hidden. I was using it to do my automatic updates. Now I just use yum. between the time I first installed Fedora 12 and now, something has happened to my build to cause these issues.
View 14 Replies
View Related
Jun 10, 2011
I have two touch screen monitors tha tI'm configuring for a dual-head display.That is working.For the touch screens it's a bit more complicated, each touch screen requires that I apply a specific config file for each individual TS (touch screen). Each config file is unique to it display. for that I'm using xinput to apply those configuration.My problem here is that the TSs are the same model and show up under udev and xinput under the same the same name minus the different hardware IDs whish is the only way that I can currently distiguish them.So far I've experimented with tweaking the udev rules for a particular TS with no luck (more than likely because I might be doing it wrong).I ned to be able to tell the two appart when I apply the configurations in xinput so I can write a script that will do this automatically for me.
View 1 Replies
View Related
Aug 10, 2009
/etc/udev/rules.d/20-our.rules has worked perfectly in FC6 and F10. In F11 I can't get udev to even look at it, much less execute the udev commands in it. Stat tells me that none of the relevant files have been accessed when I plug in a USB device that udevadm says was processed and which clearly matched the rules.. I reboot with several USB devices plugged in and according to stat nothing anywhere in /etc/udev was accessed during the boot process.
View 11 Replies
View Related
Oct 15, 2010
Having finally made the switch from Windows (7 Professional) to Linux (Fedora 13) on my laptop, I'm now trying to get all my devices working, specifically an Olympus VN-4100PC Digital Voice Recorder. I've installed odvr and it works in root, but not as a normal user. The installation instructions say: odvr *requires* access to the user-space USB interface.
It is recommended to place "41-odvr.rules" into "/etc/udev/rules.d" or setup your own udev rules rather than running odvr as root. After changing udev rules, don't forget to run "udevcontrol reload_rules" and to replugin your DVR. Again, root privileges are required unless udev is properly setup. The file "41-odvr.rules" (designed for Ubuntu) has the following content:
SUBSYSTEM=="usb", SYSFS{idVendor}=="07b4", SYSFS{idProduct}=="020d", ACTION=="add", GROUP="audio", MODE="0664"
I tried just doing what it said and copying it to "/etc/udev/rules.d" but it didn't seem to work. Looking at other files, I then changed it to:
SUBSYSTEM=="usb", ATTR{idVendor}=="07b4", ATTR{idProduct}=="020d", ACTION=="add", GROUP="audio", MODE="0664"
And now if I do "ls -l /dev/bus/usb/002", I get:
crw-rw-r--. 1 root audio 189, 134 Oct 15 01:21 007
Which seems to suggest that it is running the "41-odvr.rules" file, since lsusb gives:
Bus 002 Device 007: ID 07b4:020d Olympus Optical Co., Ltd Digital Voice Recorder VN-240PC
But odvr still doesn't work as a normal user, giving:
Failed to open Olympus device: couldn't claim interface
View 2 Replies
View Related
May 3, 2010
I am setting up iSCSI on Oracle Enterprise Linux.
After configuring the iscsi service, the symbolic link iscsi under the /dev folder is not created when the iscsi service is started.
Created the following UNIX shell script /etc/udev/scripts/iscsidev.sh on iscsi client node:
..............................................
#!/bin/sh
# FILE: /etc/udev/scripts/iscsidev.sh
[Code]....
View 8 Replies
View Related
Mar 29, 2009
I have done a fresh text-only installation of Fedora 10 on a Dell Dimension E521 for the purpose of setting up a server. After installation I ran yum update to bring the system up to date. After the update, I rebooted the computer, but the boot process froze. I recycled power and pressed "I" after the Dell BIOS screen and the GRUB bootloader appeared. I selected the most current version, edited the kernel line by deleting "rhgb quiet" and replacing it with "3." After making this change, I continued with the boot and the computer stopped at "Starting udev:" I have two fedora 10 revisions showing in the GRUB bootloader, the original installation and the update after running yum.
I repeatedly tried rebooting both versions and, after about 30 attempts, the computer finished booting and got me to the command prompt. Reading through the forums indicated there might be some issue with my nVidia GeForce 6150 onboard video and fedora 10. So, when I got to the command prompt, I followed the instructions in the forums [URL] to load the rpmfusion drivers. This appeared to be successful and when I looked at /etc/X11/xorg.conf it appeared to be correct for the new nVidia drivers. After loading these new drivers I tried rebooting. Unfortunately, I have been trying now over and over to get back to the command prompt, but simply can't get past "Starting udev."
View 13 Replies
View Related
Aug 11, 2009
i'm heaving the following message at boot time: "Starting udev: udevd[114]: unknown key 'DEVTYPE' in /etc/udev/rules.d/70-cups-libusb.rules:6", i guess it's something about usb printing support but i am not sure, and i don't know how to fix it, does any of you guys know what this exactly means and how to fix it
View 6 Replies
View Related
Mar 24, 2010
I ran update on my ASUS N51Vf laptop yesterday and among the updates there was one for udev. After installing it udev refuses to start at all saying: "iTCO_wdt: unexpected close, not stopping watchdog". Then I get to login but not for long: after several seconds either system reboots instantly or it hangs shutting down display. Is there any way to rollback udev update somehow considering I can't even login into system?
View 5 Replies
View Related
May 29, 2010
on bootime the system hangs till pressed <alt><esc> a couple of times. The splash image is shown and the bright spot nearly full. The network and disk led's are off. System is hanging.After <alt><esc> ing a couple of times the leds blink,, the system comes up and the gnome login screen appears. The same behaviour ( exept of the gnome login screen )if starting with runlevel 3.Press 'I' to enter interactive startup.udev starten: %G[60G[[0;32m OK [0;39m] Is it possible that the udev error is responsible for the stattup - hang?
View 6 Replies
View Related
Aug 19, 2010
In the not so distant past, I was able to hide arrays/encrypted arrays from nautilus with udev rules as follows:
Code:
## HIDE Encrypted "dm" partitions from nautilus
SUBSYSTEM=="block", KERNEL=="dm-*", ENV{ID_FS_USAGE}=="crypto", ENV{DKD_PRESENTATION_HIDE}="1"
## NOTE: not needed by Fedora
[code]....
View 1 Replies
View Related
Jul 17, 2010
I have Fedora 13 installed in a new computer, and form some weird reason, udev is skipping three of my HDs. Looging the output for udev --triger, the entries for the HDs are skipped
Code:
[root@storage ~]# lspci
00:00.0 Host bridge: ATI Technologies Inc RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
00:06.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C)
00:07.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D)
00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F) .....
View 5 Replies
View Related
Aug 9, 2009
my fedora 10 booting stops at starting udev for 5-6 minutes.when i pressed 'i' for interactive , i see ata3(i think its my DVD-R/W) responding too slow. so, booting stops there till it responds.o/p of
Code:
dmesg | grep -i ata3
gives
[code]...
View 1 Replies
View Related
Jun 29, 2010
I have little problem with gpk servce pack (from gpk-package-extra package). When im trying to make list of my packages in system i have:
Quote:
Can't write the file, no permissions. OK, but when i run gpk service package as root, program freeze, i click create packages list option but application never create this file, status is always on 0%, even after 1 hour. I saw video tutorial, where base are created by normal user i /home - why i can't Console says nothing about this.
View 2 Replies
View Related
Nov 22, 2009
Fedora 12 randomly crashes after a fresh install.Everything is left at its default during the installation except I install KDE and not Gnome.When I try to boot I hit esc at the splash screen to see where it hangs, but it never hangs at the same spot twice. Sometimes it hangs and sometimes it restarts. Its crashed everywhere from starting udev to the login screen.
I've been using kubuntu for the past year because I have the same problem with F10 and F11.
I dual boot with Windows 7 for games.
System specs:
Motherboard: MSI P45 Platinum
Processor: Intel Core 2 Duo E8500
Video Card: Radeon HD4850
Memory: 4GB (2x2GB) Patriot
HDD: Main: 250GB SATA Western Digital
code....
View 5 Replies
View Related
Sep 10, 2010
I am running Server 10. I have a requirement to perform an action before the MySQL service starts, and perform another action after MySQL service stops.
I found the init script for MySQL under /etc/init/mysql.conf. I added my thing to the pre-start script there and works fine.
I am having trouble finding the script that stops the server so I can modify.
View 1 Replies
View Related
