Fedora :: Set Up A User Account For Automatic Login?
Jun 13, 2009is it possible to set up a user account for automatic login on fedora 11, and if so, how is it done?
View 3 Repliesis it possible to set up a user account for automatic login on fedora 11, and if so, how is it done?
View 3 RepliesI have a windows 7 ultimate host machine, installed oracle virtual box on it. Made a iso image to boot fr fedora. All this is fine when the installation is complete, it asks for reboot. Reboot done. Then I went to terminal. Did a SU - root to get into the root. Then I did a firstboot command to enter information. I created a user for myself and at the end rebooted the virtual box.
When it starts up, it does not show my user. It just shows "Automatic Login" and it logs in as Live System User. Even if I try to switch user then it gave me a authentication failure when I enter the credentials of the user which I created. If I try to create users manually using system administration, the user is lost after reboot. I have tried all possible steps...as instructed on the net.
I have just installed Centos 5, and created two user account in it. how can i set it up that it will automaticaly boot to one of the user acount upon bootup?
View 2 Replies View RelatedHow can I add a user? I used the command "useradd -m <username> -p <password> but I cannot login to this account. It says " Authentication Failure". I want a single Command to Add user with password.
View 2 Replies View RelatedI created an account using the following command:#useradd -g developers john and successfully changed the user password with:#passwd johnThe user is unable to login using the New Password using SSH. As a root I can login (#su - john) with no problem.
View 1 Replies View RelatedI am a new Linux user and have a question about the administrative authentication. When I am logged in as a user and I need to do something that requires root privileges the little password window comes up and I enter the root password. My question is how long are the root privileges granted for?I noticed that a few minutes after finishing checking out the firewall configuration tool and closing the window that I was still able to re-enter the fire wall tool and other administrative tools. How do I log out of the root privileges without logging out and then back into my account?
View 2 Replies View RelatedIf I'm getting good at anything with Fedora, it would be making mistakes. I have Fedora 12 installed and it was running fine until I attempted to set the path in bashrc and cshrc for jdk. Now I am unable to login using the only user account I created at install. When I enter my password the login screens goes blank then my mouse pointer appears with the circling dashed loading symbol for a few secs and then brings me back to the login screen asking for my password again.
View 4 Replies View RelatedIf I understand correctly Ubuntu does not allow a wifi connection until a user loges in. That makes it so that prey (see preyproject.com) cannot send notices until someone has logged onto Ubuntu.what I would like to do (but I have no clue how) is to set up a user account that automatically, in the background, logs on at start up. Then this little user login would establish any Internet connection that is possible (wifi or lan) and start the program 'prey'. This should all be totally transparent to the user that would just see the regular log in screen.
View 4 Replies View RelatedI recently made a computer for someone who decided to get a new one instead.. so i thought i'd make a server out of it lk i had it before. so i deleted their account (while on their account) and made me an account.. but now when i try to login to my account it's.. not there? such as when i type my username and pass it says i entered an invalid user/pass. any idea how i can get my user accounts back or atleast logon to this system? i know the root password if there's any way i can login under the root account.
View 8 Replies View RelatedI'm looking for a script that can do two things: (1) determine the shortname of the user with the largest account in /Users and (2) look up their full/long name. I'm going to use this script to help identify who the user on a computer and while I know that's possible that a sometime-user may have a larger account than the normal-user on any given computer, the results of a script should be sufficient in most cases for my needs.I'm not sure the best way to around this. I know that can use "du -m -d1 /Users" as root:
root on torchwood
[ ~ ]$ du -m -d1 /Users
157 /Users/admin
[code]...
When opensuse boots up and shows the login screen. The login screen shows all configured user accounts to select from.
How would I hide these accounts for opensuse 11.3 with KDE and opensuse 11.4 with LXDE.
Network server to administer accounts for all users, one login ie at login select or type in user name and password to login - so that I don't have to setup users separately on all PC's so that they can login from any computer.
View 3 Replies View RelatedRecently I deleted files from my root/share folder in an attempt to remove a program which had made the system virtually unusable. Upon reboot of the system I accessed the partition I had just edited and I found that I was unable to login using the login manager, every time I hit login it just returns me to the same screen displaying the message: unable to start session.
View 3 Replies View RelatedI want to create an unprivileged user account, say 'shutdown', which can be used only to shutdown the system. I followed the instructions in ut when I login into the system, I get this error 'Cannot execute /usr/bin/sudo /sbin/shutdown -h now: No such file or directory'.These are the configurations that I did
/etc/sudoers:
Code:
shutdown localhost=/sbin/shutdown -h now
[code]...
Not able to login to a user account, even after clearing the password from root using passwd -d
[root@ivrsdb1_pnq /]# passwd -S oracle
Password locked.
[root@ivrsdb1_pnq /]# passwd -u -f oracle
Unlocking password for user oracle.
[code]....
I just installed Fedora 12 on a laptop. I changed the default shell on the root account to /bin/tcsh and changed the runlevel to 3 and then rebooted. Now I can't login into the root account: it returns me immediately to the login prompt and I can't see any error message (the screen is cleared).Why is this happening?Can I boot into some sort of safe mode so I can undo my changes to the /etc/inittab and /etc/passwd file?I tried booting with a Live CD with the intention of mounting the filesystem and making the changes, but the new filesystem is a LVM and it won't let me mount it (or I don't know how to mount a Logical Volume).
View 3 Replies View RelatedTo enable automatic login, I edited the /etc/gdm/custom.conf file and entereted the following lines:
Code:
The automatic login is working but I still see the login box with options to select language. After a delay of few seconds, the system will automatically log me in. I don't know why I see the login window. Is there any way to bypass this window?
i am having problems with privileges i have created a new user with my name, but i cant get root privileges on it. i need the same privileges as the root profile.
View 9 Replies View RelatedSo, I logged into my laptop this morning and tried to run a VirtualBox VM and it barked that I had not setup the kernel module yet. I found this odd since I was running it fine yesterday... so I was poking around my system and noticed that there was a yum update yesterday
Code:
Jun 07 14:03:21 Updated: 1:gdm-3.0.4-1.fc15.x86_64
Jun 07 14:03:22 Updated: 1:gdm-plugin-fingerprint-3.0.4-1.fc15.x86_64
Jun 07 14:03:35 Installed: kernel-debug-devel-2.6.38.7-30.fc15.x86_64
Jun 07 14:03:37 Updated: kernel-headers-2.6.38.7-30.fc15.x86_64
[Code]......
I made my Fedora 13 box boot up automatically by adding the following to /etc/gdm/custom.conf
Code:
However, when it boots up it prompts me for my password so it can connect to my wireless network (I think it said something about not getting my user password at login). Is there anyway I can get it to remember this?
I would like to make this automatic because this will be a remote box that I will use as a file server, but it wont be turned on all the time. So I'll turn it on when I need it, but I'll need to connect to it remotely, so obviously it needs to be on the network.
I want a automatic login in my system with fedora 15 LXDE Spin. I followed the steps given in this thread but it doesn't work. There is no login screen option in administration also. What should I do?
View 4 Replies View RelatedI'm trying to use automatic login with sudo like this:
But in both case I'm getting the same error:
My linux version:
My sudo version:
My terminal settings:
I have tried editing
Code:
/etc/gdm/custom.conf
by adding
[code]...
I have just a one line script that runs telnet, and even thoughI've looked around I thought maybe someone could just tell me if there is a way to automatically login to the telnet server without having to type it in everytime. It's more of a hassle type of thing, but no matter what I've tried, I can't get anything to work.
View 5 Replies View RelatedI have a problem with the Google search box top right corner in Konqueror, when entering search I recieve an error page "Unsupported Protocol" Google asks for ioslave or kioslave. Also when highlighting text on a page and right clicking with the mouse no search option is given. I created a new user and all works as it should for the new user. What is wrong with my user account? I have reset default values in Konqueror setup.
View 3 Replies View Relatedhow to make a admnistrator account and change normal user role admin role i want to modify file system
View 3 Replies View RelatedI just tried to change a user account by changing its name, password, and home directory. But first I had created a new account with the new name, pass, home directory. I tried to log into the new account but got a dead account. Nothing came up, and it didn't allow anything, complaining about "can't create Nautilus," and other such error messages.
Tried to go into the Constantine login screen and put in "root" and the original password. "Invalid Use..." Tried "root" with the new pass. "Invalid..." So what can I do at this point to get in and create a nice, clean, new account (with admin privs) for the new user?!
When logging in to my user account in Fedora 12 i686 i received an error message "Could not update ICEauthority file". The file in question is in /home/janne/.
I can get into the system but several programs do not respond.
Our requirement is to create multiple user account with UID:-
/tmp/users.txt
rohit
guna
samsir
like this 100 user names in /tmp/users.txt file
/tmp/uid.txt
2001
3789
1000134
like this 100 UID's in /tmp/UID.txt file
The script should take input from both the files and create user account. for example user account rohit should have an UID of 2001 and user samsir should have an UID of 1000134.
I am trying to integrate my centos machine with active directory [Windows Server 2008] using Kerberos and LDAP. I can now successfully SSH to my linux machine as an active directory user. Then it automatically creates home directory for that particular user using the PAM module.
My problem is that i cannot login to GDM using the same active directory account. Should I do some configuration changes for GDM login to take place using an active directory account.?